Don't understand how to save/export

Hi-
I just got my first Mac & although I have used IMovie in the past to make a DVD from photos, I've never used it with video.
I wanted to film a short clip and be able to email it to someone. I figured out how to film it but when I go to "share" to try to export it to quicktime, it will not allow me to do that. It is almost like I need to save it somehow first (all I have is the basic clips from when I recorded, where if you drag the cursor over it, it skips through, etc) but I cannot figure out for the life of me how to do that. The last thing I did was click 'stop' when I was done filming and now I'm not sure about next steps. The tutorial is more about imported video clips from what I can tell & I've tried the the help menu & googling it also.
Any help would be greatly appreciated!

You need to create a project (File > New Project) name it etc. then drag your events or portions of events in.
A shortcut to dragging is highlight the portion of the event OR if you want the whole clip you can right click and go 'select entire clip' then just hit the E key on your keyboard. It will move the event into your project.
Now when you go to Share and you get to where you choose the size, there is a little "i" (i for information) at the right hand end of the line.
Select a size then click the 'i' and it will show you the file size of you movie.
That will give you a guide as to whether it is a suitable size for emailing.
Z

Similar Messages

I'm trying to export an ID image as a jpg and don't know how to save it at 1920 x 1080.

Could use some advice on the following question:
I'm trying to export an image as a jpg and don't know how to save it at 1920 x 1080.

Thanks Eugene. I was taking the question literally—the OP wanted to directly save a .jpg at 1920x1080 from ID.
If the ID document is set up as 1920x1080 pixels you could export as PDF and open into PS at exactly 1920x1080 by setting the res to 72 in the import dialog.
Of course the converted PDF has no compression applied (at least to native ID objects) and would have some higher quality than an exported High quality JPEG.
But the OP needs a JPEG and if you want to compare compression artifacts, you would have to save the opened PDF as JPEG, close and reopened. With PDF there is the option of saving the opened PDF with Maximum quality, which is probably better than ID's JPEG export High quality. But If I compare the 2 methods in a layered PS file it's hard to discern a meaningful difference. See Compare.psd in this zip
http://www.zenodesign.com/forum/ExportTest.zip
Direct
PDF to JPEG

I know this is in trouble shooting but don't understand how to reset in fire fox 4, can't save tabs for next session?

when i updated lost the message do you want to keep tabs for next sessions can you do it with the new version of fire fox i knowit is in help but don't understand how to fix it .
Martin

OK and when I run desktop manager then what do I do? There are no instructions after this setup with my mobile carrier, they just leave me hanging. Also, is my phone going to be wiped or will it just update the OS? I don't want to lose all my settings that took me hours to setup on this thing and have to redo everything all over again. Backup? I don't understand how to do that either (again all of this is new to me). I don't have a second phone where I can call T-Mobile on the phone and have them walk me through it, I only have my cell that's it. They refuse to give me instructions unless I'm on another phone when I call them, why they won't let me write them down is beyond me...these carriers are getting mighty picky these days on customer service/technical support.

When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards. It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer. Help!

Click here and ask the iTunes Store staff for assistance.
(108048)

I don't understand how to upgrade to iOS 5 or 6 on my iPad?

I don't understand how to upgrade to iOS 5 or 6 on my iPad?

Connect to iTunes. Click on your device. Click Update.

I don't understand how to download an attachment on an email. It appears to countdown as I; downloading, but I can't find it. Anyone help, please

I don't understand how to download an attachment on an email, on my iPad. It counts down as if downloaded, but I can't find it? What am I doing wrong?

What kind of attachment you are trying to download? After downloading, it should appear with the icon of the program that mostly likely will open it.
Some formats are not supported...

HT204406 Don't understand how to buy new music?

I had Itunes a long time and I would like to buy more music. I don't understand how to get into purchasing the music.

Same as always.
What issue are you having?
Find the song you like. Click Buy

I don't understand how to 'warp paths'. Please help.

Hey,
Can someone help with me 'warping paths'. I don't understand how to do step 2 of this tutorial
[url]http://www.pegaweb.com/tutorials/moonbase/moonbase-website-layout-1.htm[/url]
It asks you to pick a foreground color, use the pen tool and make a traingle with the points, completing your last point by clicking on the first and completing the loop.
Then it wants you to go to Ctrl+Click on the path, add a few new points, and drag them around to warp the path but I cannot warp it like in the tutorial. I just get some random shapes and inversion of foreground color and white.
How do I do step 2?
Thanks.

Those are basic path adjustments. With the pen tool selected, you Ctrl+click on the path to make sure it's selected and then click on the path a couple of times with the Pen tool to add some anchor points which you then modify
Path segments, components, and points
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7390a.html
Convert between smooth points and corner points
http://help.adobe.com/en_US/Photoshop/11.0/WS7EE0B5C9-A95D-465d-BFEC-2149F76CEFB9a.html
Adjust path segments
http://help.adobe.com/en_US/Photoshop/11.0/WS068CF4C8-5B1A-463a-99F5-151F2EFEB38D.html

I don't understand how to bind a node

Hi guys
I don't understand how to bind a node
I want to bind a mandatory parameter for my model (ex: Bapi_Delete_Travel_Expense_Input)
if the parameter is a node ,not a attribute,how to bind it I don't understand yet.
Please give me some suggest
Thanks
Best Regards
Yan

Context--
Z_Hr_Ess_Delete_Travel_Expense_Input (node)
Framedata (node)
Outpute   (node)
Employeenumber (attribute)
Tripno (attribute)
The Framedata's structure is Bapitrmian
The mandatory parameter is " Framedata" , "Employeenumber " , "Tripno"
The Framedata need through other RFC "Z_Hr_Ess_Read_Travel_Details_Input"   to get
Context--
Z_Hr_Ess_Read_Travel_Details_Input
Output (node)
Framedata (node)
Employeenumber (attribute)

I don't understand how to sync settings in mail settings to fill lesser number of emails in my inbox

i don't understand how to sync settings in mail settings to fill lesser numbers of emails in my inbox

OK and when I run desktop manager then what do I do? There are no instructions after this setup with my mobile carrier, they just leave me hanging. Also, is my phone going to be wiped or will it just update the OS? I don't want to lose all my settings that took me hours to setup on this thing and have to redo everything all over again. Backup? I don't understand how to do that either (again all of this is new to me). I don't have a second phone where I can call T-Mobile on the phone and have them walk me through it, I only have my cell that's it. They refuse to give me instructions unless I'm on another phone when I call them, why they won't let me write them down is beyond me...these carriers are getting mighty picky these days on customer service/technical support.

I don't understand how to update my OS software!

T-Mobile finally released the 4.5 version of the BlackBerry software but I don't understand how to update my phone's OS. Their instructions are extremely confusing (leaving out information) and I'm just not sure how to do this. All I want to do is update the OS, I don't want to delete anything from the phone.
Their instructions say to download the file from their website to update but they fail to tell you when to connect you phone (hey I'm a new user of these phones) so the **bleep** software installs on my pc! I'm like wtf??? Then on further down their instruction page they tell you to put a check mark in back up my settings but leave the checkmarks below that for delete apps, etc unchecked...yet I can't uncheck them, there are checkmarks in them already and the boxes are greyed out and I can't remove the checkmarks.
I just don't know what to do, I do not want to have to sit here for hours resetting up my phone all over again (it's really a pain in the ass)! Isn't there a way to just update the OS on the phone without deleting anything from the phone? If not f this then!

OK and when I run desktop manager then what do I do? There are no instructions after this setup with my mobile carrier, they just leave me hanging. Also, is my phone going to be wiped or will it just update the OS? I don't want to lose all my settings that took me hours to setup on this thing and have to redo everything all over again. Backup? I don't understand how to do that either (again all of this is new to me). I don't have a second phone where I can call T-Mobile on the phone and have them walk me through it, I only have my cell that's it. They refuse to give me instructions unless I'm on another phone when I call them, why they won't let me write them down is beyond me...these carriers are getting mighty picky these days on customer service/technical support.

Don't understand how to transfer from iWeb to personal website

I have created a website on iWeb but I don't understand how to transfer it to my own domain name through my university. I'm not very good with technology and don't really understand what an FTP is. Is that what I would use Dreamweaver for? So confused, help!

I have created a website on iWeb but I don't understand how to transfer it to my own domain name through my university. I'm not very good with technology and don't really understand what an FTP is. Is that what I would use Dreamweaver for?
No, you should not use Dreamweaver. A good ftp program is Cyberduck.
http://cyberduck.ch/
You publish your site to a folder and then upload it with Cyberduck. I recommend you ask the IT Help desk of your university about how best to do this.

Don't Understand How to Play a Playlist in ITunes

I don't understand how to get Itunes to play my playlists on my home computer. I select the playlist, press the play button and either nothing happens or it may play the first selection in the playlist then stop. When I try to skip a song, it just stops as well. Is there some setting I need to have to simply play a playlist on my home computer. The playlists work fine on my Ipod. I don't get it. Please help.

Glad we found it.
Ya, the checkboxes are there to basically let iTunes know, yes, you can play me automatically. If they are unchecked, they don't get played (unless you specifically pick to play them) and if there are NO checked songs in a playlist, after it finishes the current song, finds nothing checked, so doesn't play anything else.
Patrick

HT201320 I don't understand how to transfer my email contacts from my Windows laptop to my iPhone? What do I need to do?

I don't understand how to transfer my email contacts from my Windows laptop to my iPhone? What do I need to do?

Hey wahanz!
In order to sync your Windows contacts to your iPhone, you will need to first create an iCloud account:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
You will create the iCloud account on your iOS device, and when you do, don’t forget to turn on contact syncing in the initial setup. Then you will want to download the iCloud control panel for Windows onto your computer and install it:
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Make sure that your contacts are in Outlook, as that is the supported way of syncing your contacts to iCloud, then make sure you have the contact syncing enabled in the iCloud control panel on your computer, and when the contacts have synced, they will be available on your iOS device! Thanks for using the Apple Support Communities. Have a good one!
-Braden

Auto debit by Skype that I don't understand how th...

Need help. My credit card has been compromised. Have been charged on my credit card since March 2014. After approaching the my bank, i was asked to cancel my credit card and was replaced with a new card in May. However, in June I was again charged on my new card. I was then told by the bank that it was an auto debit by Skype. I really don't understand how this had happened. How do I get a refund from Skype?
This post was transferred from its previous location on a blog article to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.

Don't understand how to save/export

Similar Messages

Maybe you are looking for