Don't view the right colors

Hi.
I have problem with the color Photoshop CS% shows my picture with.
I all other programs, ACDSee, Snag-It, Picasa and ....  - my pictures colors  is OK .
But then I open the same picture in Photoshop CS5 the color change to colors I don't like.  Se the picture.
My graphiccard is a Nvidia GeForce GTX 660 with opdated drivers - driverversion is 337.88.
Hope someone can help me.

Looks like a color-management problem to me.
Photoshop strives to show you accurately rendered color, per the color profiles in your images and the color profile associated with your monitor.  Many/most other programs do not do proper color-management.  This is key.  You may be interpreting the color you like as the "correct" color, when in fact it's the one that's wrong.
If your monitor profile accurately describes your monitor's color characteristics, then it is the other programs that are displaying the images in an oversaturated manner, because they are ignoring the monitor's color profile.  Trust what you see from Photoshop.
Chances are, given the images you've posted, this may be happening:  Your monitor is a wide-gamut model and Photoshop sees a profile associated with it (by the OS) that tells it just that, and so Photoshop color-manages accordingly:  Colors in images tagged with the sRGB IEC61966-2.1 profile are desaturated some, for accurate display.  Other applications that ignore the monitor's color profile will not transform the colors and will thus oversaturate them.
One other possible problem:  The monitor profile may not accurately describe the monitor.
Color management is a bit too complex a subject to try to teach post by post on a forum.  I suggest you seek information on it online.  Beware of folks saying "just do this", as it's not a thing you can just set and forget and get it right.  You have to wrap your mind around how it all works to be able to make sensible choices on your system.
What do you see in your OS's Color Management dialog?
-Noel

Similar Messages

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • I cannot use the right colors for a web image.

    I cannot use the right colors for a web image. Photoshop CC keeps replacing colors because my colors are "out of color space for print" or something like that (I hope I translated it right - I work with PS Dutch version and this forum is only in English).
    I am not interested in printing at all. I do not want any adaption for printing! I only want the right color on screen for a web image.
    I changed the color settings many times,  I created my image all over again, but Photoshop keeps replacing my vivid red by pale pink because of print colors.
    Thanks for your help.

    Use SRGB color space. and in the color picker when you see the warning don't click on the warning to have it fix the issue. As that will change the color you want want to use.

  • Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    It should be in the Users/ Shared folder.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
    Regards
    TD

  • Query don't use the right index when using bind variables

    Hi people !
    I need some help because I have an issue with a query that don t use the right Indexes as it should
    First of all, I have mainly three tables :
    ORDER : Table that contains description for each Order (approximately 1 000 000 Records)
    ORDER_MVTS : Table that contains the tasks made (called movements) to set up each Orders
    with quantity of packages prepared for each product (approximately 10 000 000 Records)
    PRODUCT : Tables that contains the products (approximately 50 000 Records)
    When I launch the query with hard coded values, it brings back response very fast
    because it uses the right index (ORDER_DHR_VALID) which represent the date and hour of the order
    (with format 'DD/MM/YYYY HH24:MI:SS'). The selectivity for this index is good.
    NB 1: I have to use the trick " >= Trunc(date) and < trunc(date) +1 " to filter on a simple date because
    the index contains hour and minutes (I know it wasn't probably a bright idea at conception time).
    NB 2: The index on ORDER_MVTS.PRODUCT_CODE is'nt discriminating enough because there is'nt enough different products.
    It's the same for index on CUSTOMER_CODE and on MVT_TYPE so only the index on ORDER.DHR_VALID is good.
    Here is the correct explain plan when I execute the query with hard coded values :
    SELECT SUM(ORDER_MVTS.NB_PACKAGE)
    FROM ORDER_MVTS, PRODUCT, ORDER
    WHERE ORDER.DHR_VALID >= TRUNC(to_date('14/11/2008 10:04:56','DD/MM/YYYY HH24:MI:SS'))
    AND ORDER.DHR_VALID < TRUNC(to_date('14/11/2008 10:04:56','DD/MM/YYYY HH24:MI:SS')) + 1
    AND ORDER_MVTS.MVT_TYPE = 'DELIVERY'
    AND PRODUCT.CODE = ORDER_MVTS.PRODUCT_CODE
    AND ORDER_MVTS.ORDER_CODE = ORDER.CODE
    AND ORDER.CUSTOMER_CODE = 'ADIDAS'
    AND PRODUCT.CODE = 1234
    Rows Row Source Operation
    1 SORT AGGREGATE
    2 NESTED LOOPS
    4 NESTED LOOPS
    2 INDEX UNIQUE SCAN (object id 378548) --> PRODUCT_PK
    4 TABLE ACCESS BY INDEX ROWID ORDER
    777 INDEX RANGE SCAN (object id 378119) --> ORDER_DHR_VALID
    2 TABLE ACCESS BY INDEX ROWID ORDER_MVTS
    30 INDEX RANGE SCAN (object id 377784) --> ORDER_MVTS_ORDER_FK
    Now the problem is when the query is used in a Cursor with bind variables.
    It seems like Oracle don't use index on ORDER.DHR_VALID because he can't figure out that he have
    to actually filter on a short period of time (only one day).
    So Oracle uses the index on ORDER_MVTS.PRODUCT_CODE which is'nt a bright idea (it takes 10 secondes instead of just one)
    Here is the bad explain plan :
    Rows Row Source Operation
    1 SORT AGGREGATE
    2 NESTED LOOPS
    722 NESTED LOOPS
    2 INDEX UNIQUE SCAN (object id 378548) --> PRODUCT_PK
    722 TABLE ACCESS BY INDEX ROWID ORDER_MVTS
    1790 INDEX RANGE SCAN (object id 377777) --> ORDER_MVTS_PRODUCT_FK
    2 TABLE ACCESS BY INDEX ROWID ORDER
    1442 INDEX UNIQUE SCAN (object id 378439) --> ORDER_PK
    Now I have found two solutions to this problem :
    1) using a Hint to force the use of index on ORDER.DHR_VALID (with /*+ INDEX(ORDER ORDER_DHR_VALID) */ )
    2) Using Dynamic SQL and keeping the date hard coded (but not the other values except mvt_type)
    For example :
    QUERY :=
    'SELECT SUM(ORDER_MVTS.NB_PACKAGE)
    FROM ORDER_MVTS, PRODUCT, ORDER
    WHERE ORDER.DHR_VALID >= TRUNC(TO_DATE('''||To_char(P_DTE_VAL,'DD/MM/YYYY')||''',''DD/MM/YYYY'')) '||
    AND ORDER.DHR_VALID < TRUNC(TO_DATE('''||To_char(P_DTE_VAL,'DD/MM/YYYY')||''',''DD/MM/YYYY'')) + 1 '||
    AND ORDER_MVTS.MVT_TYPE = 'DELIVERY'
    AND PRODUCT.CODE = ORDER_MVTS.PRODUCT_CODE
    AND ORDER_MVTS.ORDER_CODE = ORDER.CODE
    AND ORDER.CUSTOMER_CODE = :CUSTOMER
    AND PRODUCT.CODE = :CODE ';
    These two solutions work but Number 1 is bad in theory because it uses a Hint
    and Number 2 may be difficult to code.
    So my question is : Does someone knows another solution to force the use of index ORDER_DHR_VALID that can be simple and reliable.
    Thank you very much for support
    Edited by: remaï on Apr 1, 2009 4:08 PM

    What version of oracle you have? CBO work is different in 9i and 10g.
    Usually cost based optimizer do not want to use index for >< condition with binding variables because optimizer can not use statistic to determine selectivity, and by default selectivity of <> operators is low.
    (As I remember '>' selectivity by default is 5%, you have two conditions > and <, therefore resulting selectivity will be 0.05*0.05=0.0025 as two independent events, but selectivity of other conditions
    ORDER_MVTS.MVT_TYPE = 'DELIVERY' or ORDER.CUSTOMER_CODE = 'ADIDAS' looks much better for CBO)
    The best solution I see is do not use binding variables. Actually your query looks as searching query, which executes not so often, therefore you will not have perfomance win along of skipping execution plan creation.
    Edited by: JustasVred on Apr 1, 2009 10:10 AM

  • Ever since i plugged my iphone into the computer, all of my music has been messed up. The songs don't have the right album cover i guess they all just got mixed up somehow. i dont know but its annoying and im not sure how to fix it.

    Ever since i plugged my iphone into the computer, all of my music has been messed up. The songs don't have the right album cover i guess they all just got mixed up somehow. i dont know but its annoying and im not sure how to fix it.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My document don't print the same color when I print it from PDF rather than InDesign

    I have a vector image that don't print the same color when I export it to PDF but the colors are the same on the screen.
    How can I be sure to have the same colors as my InDesign original document when I print it as a PDF ?

    I use the default settings for High Quality Print

  • My computer broke, so I had to change the hardisk(?). Now iTunes dosen't work anymore. It says that the program is either lockes, on a locked unit or I don't have the right to open the library? Help please? :)

    My computer broke, so I had to change the hardrive-hardisk(?). Now iTunes dosen't work anymore. It says that the program is either locked, is on a locked unit or I don't have the right to open the library? Help please?

    Sometimes a restart can fix this issue, but sometimes you have to fix the iTunes Library.itl file.
    Try quitting iTunes, renaming the itunes file "iTunes Library.itl" to "iTunes Library Old.itl"
    then open itunes again
    This should generate a new library file.
    From this point you can try two different avenues.
    1. Re-add everything to your library by going to the iTunes file menu, and selecting "add to library"
    2. You can try deleting the iTunes Library.itl you created, changing the name of the old file back to iTunes Library.itl
    I hope this helps. I did something like this a while back and it worked for me.

  • How can I make Calen Mob pick up the right colors

    How can I make Calen Mob pick up the right colors from Google Calendar. In fact, how can I contact the developer that made Calen Mob Pro. I hear it was Blue tag but they either sold it or dropped it because they make no claim for it.  Does anyone kknow of a group calendar for IOS that will report the color choices as well as the  data? Calenmob Pro just brings in one color for every date and appt. Thanks!

    Where did you get LR2.2? The most recent public version is LR2.1!
    Try an external EXIF reader like EXIFReader.
    Don

  • Designjet 130. The printer prints not the right colors

    Ru:
    Принтер печатает не правильные цвета:
    жёлтый - отсутствует (отображается белым), красный - печатает розовый, зелёный - печатает  голубой. Калибровка не помогает. Все картриджи полны краски.
    En:
    The printer prints not the right colors : yellow - no (shown in white), red - prints pink, green - blue prints . Calibration does not help. All cartridges are filled with ink.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Develop module, 1:1 and Export don't look the same, color issues

    Hi everybody
    I'm using the last version of Lightroom (3.6 if I'm not wrong) and I'm facing a very uncomfortable issue with the Develop module.
    I adjusted precisely every color luminance and saturation so it looks rather good in the Develop preview (set to fit), and did an export...
    The preview I worked on and the export simply don't look the same.
    I work with NEF files from my NIKON D3100 DSLR on a Mac OSX 10.7 MBP.
    This cannot be the external display profile not correctly adjusted since I viewed every pictures on the same screen.
    I unchecked every boxes from the presets tab in the settings window.
    Here are some screenshots and exports.
    Fit preview in the Develop module (left) and the actual export of the same picture (right)
    Please note I didn't activated any lens correction option and adjusted any color. This is the RAW file and its direct export.
    Screenshot of the preview window on top of noise correction options (left) and the same area once I zoomed in in the main preview (right)
    I hope this can be corrected or I'm doing something wrong.
    A couple of days before today I was using Camera RAW from PS CS5 to correct my NEF and was only keeping exports in JPEG. I decided to use LR 3 on my entire workflow and I'm being skeptical...
    Oh right and please forget about every single mystake in my post, I'm a french student.
    Thanks !
    EDIT : i can join any required file or screenshot if required. I have some other shots having tthe same issue (a lot of ones indeed...)
    EDIT 2 : i just found out the picture has much more acurate colors (relatively to the export ones) in the Library module in fit preview (Loupe I guess)

    I have the problem on another photo.
    I made a screenshot on the screen of my MBP, but it looks the same on any other screen :
    Here is the export config :
    If you need any other information I can send you them.

  • Layer Mask not revealing the right colors

    Hi I am new to Photoshop CS6, and photoshop in general. I am trying to take a color photograph, turn it to black and white, and reveal a flower in color and the rest is still black and white.
    I thought I had done this properly when I added a new "adjustment layer, hue/saturation", reduced saturization to zero, and painted the yellow flower over with black to reveal the yellow flower's color while the rest of the photo is still black and white. And it worked..except when I got to the green stem of the flower. Painting over that with black revealed a yellowish-green stem.
    I experimented a little more by painting black on the new layer mask and most of the rest of the color photo comes out wrong. The blue sky shows up like a weird smurf blue, faces are oddly peach/orange and most colors look much different than the originial photo. Yellow seems to be not affected, magenta/pink seems to be OK and blue shows up so-so. But the rest of the colors are messed up.
    I know this must be something very basic, but why are the colors showing up odd?
    Thanks

    Sounds like you did the right stuff.  You should expect to see the colors revealed where the mask is made black.  I might have used a Black & White adjustment layer rather than Hue/Saturation, as that would give you more control over the grayscale part of the result, but the technique with the mask should be  the same.
    Any chance you could take a snapshot of your screen, save as a JPEG, and paste it here?  That will help avoid a whole lot of questions.
    I noticed your screen name...  I live in "bokeh".    The weather has turned nice down here after Sandy passed by, eh?
    -Noel

  • See example (don't know the right words ;)

    i'm starting a new spreadsheet tomorrow and it's going to require me to do this (sorry, i don't even know the right words to use to describe it.. much less the formula names)
    basically:
    A1 = 5
    A2 = 6
    return = 6, 12, 18, 24, 30
    or 6*1, 6*2, 6*3 etc until it does it the amount of times entered in A1.
    sorry if confusing.. i'll try to clarify if need be.
    thanks

    Hi flat5,
    Showing the 1st copy and then the 1st 2 lines of copy 2 (the whole table is too large to show clearly in a screen shot).
    Formula in B4 to tell it when to stop (Line 33)
    =B1×11
    Formula in C4
    =B$2
    Formula in C10
    =B$3
    Formula in C12 (the start of copy 2)
    =IF(ROW()>B$4,"",C1)
    (and Fill Down)
    It will copy whatever is 11 lines above until the Row number exceeds the value in B4, then it inserts "" )NULL).
    Full output in Column C is:
    _Rotate
    copy=yes
    0
    10
    enter
    _SelLast
    _Move
    vertical=yes
    0
    7
    enter
    _Rotate
    copy=yes
    0
    10
    enter
    _SelLast
    _Move
    vertical=yes
    0
    7
    enter
    _Rotate
    copy=yes
    0
    10
    enter
    _SelLast
    _Move
    vertical=yes
    0
    7
    enter
    Copy Column C and paste into a blank TextEdit document. Save, and there is your text file.
    Regards,
    Ian.

  • Firefox download has a circle with line through it, and says I don't have the right "architecture", but previous Firefox worked fine so HELP!

    Tried to download Firefox 4.0. Window where I drag icon to applications folder has a line and a circle over the Firefox. when I attempt to drag it to the folder, it says there is a newer version already there and do I want to replace it. When I replaced it with your new download a window came up that said I don't have the proper architecture to run this. I am using Mac 10.5.8. Please fix this! I'm in the middle of planning an art exhibit and need my Firefox!!!!

    Firefox 4 requires an Intel Mac. You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • Problems during import BW structure - Don't view the queries

    Hello!
    I have a problem when import the structure of BW 7.0 with xmla file in OBIEE+. The version of OBIEE is 10.1.3.4.
    When I do the importation, I don't see the queries created on BW, only the infocubes. But the queries is associate to infocube.
    Can help me?
    Thks,
    Flavia

    I solved this problem.
    In the BEx Query Designer (BW 7), opened the query and click on "Query Properties" and then, "Extended" option. There is a checked box called “Allow External Access to this query” that must be checked. At the end, save the query in BEx and import the XMLA on OBIEE+. The queries is loaded.

Maybe you are looking for