Don't want ADC port/just 2 DVI's!!!
Sirs & Madams:
Point me to a video/graphics card with 2 DVI ports. Sick of adaptors that don't work. Simply want 2 monitors for video editing. I have both and have spent WAY too much on quick fixes. New video card...2 DVI ports...NO ADC display ports!
G5 dual. AGP. Just over a year old.
thanx
anyhelplldo
jodee
Nvidia Quadro FX 4500
Shane
"There's no need to fear, UNDERDOG is wanting a new graphics card!"
Similar Messages
-
Remove ADC port, add second DVI to G5??
Is it possible to remove the ADC port from my dualG5 and replace it with a second DVI port?
I want use a second monitor with my system - Any suggestions on how to accomplish this would be most appreciated. I already have a 20"cinema display attached.
Many, many thanks.You can't just change the port. You have to replace the graphics card with one with two DVI ports. You won't like the price (even though they are on sale).
<http://www.welovemacs.com/6613332.html> or
<http://www.welovemacs.com/6613441.html>
These cards have two dual-link DVI ports, so they can be used with 30" displays. They are double width, so they cover the first PCI slot. -
FF 19 was working fine. Downloaded 20 and within 5 mins. it crashed. Script running problems again and it slows down my internet connection tremendously. I don't want to fix it, I want to go back to FF 19 but can't find it - it doesn't exist Running XP SP 3. If I can't go back to FF 19, then I'll just remove it and stick with Chrome. I like the old private browser in FF 19 better. I run 20 - 40 tabs open at a time and the way the new Private browser works with the existing window open just uses more memory Thanks!
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Old ipod..don't want to restore, just sync with current library
I found my old 40G ipod classic and want to sync it with my current itunes. I have tried home sharing..nothing..
Don't want to erase and restore this ipod..can I import all the music and sync with current library?You can import all the music from your iPod back to the computer and iTunes. Once it's there you can sync your iPod with the iTunes library.
Be very careful when connecting an iPod full of music to an empty iTunes library.There is very real risk of permanently losing all the music.
To prevent auto sync, before you connect the iPod go to iTunes/preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
An alternative method is to connect the iPod whilst holding down the 'Command + Option' keys and do not let them go until your iPod appears in iTunes.
If you see a message that your iPod is associated with a different library and asks if you want to link to a new one, make sure you press "Cancel".
If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
Then do any of the following to transfer your music from iPod back to the computer/iTunes.
For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
Try iPodDisk. This is a program designed to transfer music from iPod to computer.
Similar programs are Expod, Yamipod, Senuti and Music Rescue.
If you want to retrieve playlists, iPodRip has the feature enabling you to reconstruct them.
And btw, your iPod is not an iPod classic. -
How do i print a list of albums i have on itunes? i don't want individual artists, just the album
the problem as far as i can see is that if i have an album of say ministry of sound with 48 + artists, itunes wants to print the album with each individual artist listed under. So instead of Ministry of sound volume 1, i get Ministry of sound volume 1 (Moby), Ministry of sound volume 1 (Air), etc etc. All i want is Ministry of sound volume , then Ministry of sound volume 2 etc. This also happens if for example i print Aarron Nevile Best of. if he is in collaboration with another artist i get Aarron Nevile and Linda Ronstadt. THERE MUST BE AN EASY WAY!!!!! it also cuts down on the number of trees i'm using.....
Me again. I'v ejust discovered that because itunes forces me to print each individual song, I am up for 500+ pages. This is a bloody joke. All i want is to print the artist and the album. Nothing else. No individual songs, no artist collabartions. Just the album and artist. HELP!!!!
-
Is there a kickstand for iPad mini? I don't want a case - just an adjustable, attachable kickstand.
I'm searching everywhere I can think of, but cannot find an attachable, adjustable kickstand for my iPad mini Retina, unless it comes as part of a case. And I definitely do not want a case. Has anyone found one?
Hi John,
I have something similar to what you referenced for home use. I'm hoping to find instead a small attachment for the upper-midback of the mini that would allow me to look at it at any comfortable reading angle while I'm using it at work. I keep it in my labcoat pocket with a Logitech thin keyboard, which can only hold the mini up at one angle - and that angle is too upright. I've tried other keyboards including the Zagg and the ClamCase; each has other unacceptable deficiencies. The Zagg only bends back a little further, and its clamp makes it impossible to touch the bottom of the mini's screen. The ClamCase is too big and heavy, and maldistributres its weight inasmuch as it allows the mini to tip over backwards when it's bent back to a comfortable reading angle (they instead should have weighted it more toward the front, wrist-rest area to prevent tipping over backwards).
Please let me know if you find such a kickstand. Thanks! -
iit's messed and this is disgusting,Send me help for my old IPad 2 ,after IOS 8.1.1. Update I need hands on help and no I'm not under warranty. I can't search properly,websites not displaying properly,none of them and touch screen terribly touchy and it is maddening.
Hi Dee12124,
Welcome to Apple Support Communities.
I am going to get you to do a soft reset that, I will hope fix some of your issues.
To do this:
1. Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons until the iPhone shuts off and begins to restart. This will take anywhere from 10-20 seconds.
3. When you see the Apple Logo, you can let go of the buttons.
If this still doesn't fix your device, what we could do is try resetting the whole device, wiping it. If this is the case, get back to me and I will pose the steps below. I would recommend that you do this AFTER the device is backedup however.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore. -
Connecting DVI Monitor to the ADC port
I have a G5 with dual video ports. One is an ADC Port and the other is a DVI port. I want to get rid of my Apple display and connect two Dell monitors both of which have a DVI connectors. How do I connect a DVI connector to the ADC port? The DVI to ADC adapter is for connecting a ADC Apple display to a DVI port. Is there an adapter for doing the opposite--a DVI plug to a ADC port?
Power Mac G5 Mac OS X (10.4.9)The ADC to DVI adapter is for connecting a DVI LCD to the ADC port. It cannot be used with a DVI to VGA adapter to connect a VGA display to an ADC port. For that you need an ADC to VGA adapter, such as:
<http://www.mac-pro.com/s.nl/it.A/id.230/.f?sc=2&category=128>
These are becoming scarce as the ADC is no longer being manufactured.
Your Sun monitor should work from the ADC port using the ADC to DVI adapter, and the Fujitsu from the DVI port using the DVI to VGA adapter. -
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
-
ATI X800XT is adc port same dvi signal as the dvi port
For starters, what does "adc" stand for? Does it mean the adc is an analog port needing conversion to digital for display to an apple cinema display? someone at apple just said it stands for apple display connection. Yes, I know I still need an adapter, but I'm wondering if this port is inferior the the dvi port on the card. I don't know if the adaptor is just changing the physical hardware connections, or something else.
I want to go from the adc port thru an adc/dvi adaptor to the matrox mxo box, out of the mxo to apple hd 23" display. I need to reserve the other graphics port (dvi) to go thru a dvi/vga adaptor to my vga monitor.
Is the adc port on the card the same as the dvi port in terms of the type and quality of signal? What is the adc port anyway?The video quality should not be compromised by using any of these adapters. The ADC outputs the same exact digital signal as the DVI outputs. The ADC-to-DVI adapter basically discards the USB and power features and passes the digital AND analog signals through.
As mentioned above, both ADC and DVI also carry analog video signals. Using a DVI-to-VGA adapter, an ADC-to-VGA adapter, or a combination of both will allow you to use an analog VGA monitor from either port on your video card, again with no degradation of the signal.
If you are missing any or all colors or the signal is degraded in some way, you must have a bad connection, bad adapter, or bad cable. Try reconnecting or replacing each part one at at time to determine the culprit.
As for the problem of non-matching DVI connectors, check the link below to determine which ones you have and which ones you need. There are pictures of each connector on this page:
http://en.wikipedia.org/wiki/DigitalVisualInterface
http://en.wikipedia.org/wiki/AppleDisplayConnector
You should be able to find an adapter (or gender changer) that matches up to your cable. A web search should give you plenty of sources and options. You may try a place like Cyberguys.com: http://www.cyberguys.com/ (Search for "DVI gender" to see all available adapters.)
With quality cables and adapters, you should be able to achieve what you are trying to do with no signal degradation to each of your monitors. Let me know how it goes.
Brent -
I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
BillThe Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch. -
I have a 6th generation iPod Nano.
I almost exclusively use it as an FM radio and as a pedometer -- so far I have not loaded any songs onto it for listening, nor do I intend to in the future.
Here's my problem:
When my Nano runs out of juice, I have to use the charging cord to plug it into to my iMac's USB port to recharge the Nano. However, whenever I do so, two different (unwanted) actions happened:
First, the act of plugging in the iPod auto-launched iTunes, for syncing. I solved this problem by finding the preference check box for launching iTunes when connecting an iPid, and UNchecking the box. That worked, problem solved.
However, the second automatic action is that the iPod appears as a connected drive on the iMac desktop, as any external device with a drive would appear when connected to any Mac. But I have no need for this to be happening -- I don't intend to upload anything to the iPod, nor to sync it, or whatever -- the only reason I ever connect the iPod to the iMac is to RECHARGE the iPod, not to tinker with the contents of what's on it.
The problem is, every time I then want to disconnect the charging cord, I have to manually "unmount" the iPod drive by dragging its desktop icon to the Trash, when then allows the "it is now safe to disconnect your external drive" state to obtain, allowing me to then unplug it without getting a warning message telling me I shouldn't have just disconnected a connected drive without first unmounting it.
This wouldn't be such a bother, except that the 6th generation iPod Nano has a new "feature" which makes it impossible to see how far along the charging is progressing while it is still in the act of charging. Thus, the only way to know if it is has become fully charged is to unplug it, and look at the battery monitor. While is it still connected and charging, all that displays on the iPod is the "charging now" battery icon, which does not reveal just how the charging is progressing, or if it is fully charged yet. (My iPhone, by way of contrast, displays during charging a battery icon which reveals how far charged it is by that point.)
As a result of this Nano "feature," I often find myself having to connect and disconnect the Nano two or three or more times each time I'm charging it, so I can simply check how far along the charging has gotten, since I want to disconnect it as soon as it has finished charging and get back to using it.
But so far, I have not been able to find any kind of setting or preference which allow me to identify this device as one which I DON'T want to "mount" each time it is plugged in.
All I want to do is just plug in the iPod, and be able to unplug it, without having to to ANY shenanigans on the computer itself. Just plug in = recharging, unplug = not charging any more. Simple.
Question: is there any way to achieve this? Or is it simply not possible, and must I manually unmount the iPod's drive (more than once, usually) each time I plug it in for recharging?I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret? -
I have done a complete fire wire transfer before but I don't want to do that. I only want to transfer certain files and leave the existing and new minis in tact otherwise. I am sure I can transfer just files. My question mostly is: I only have one monitor but will have two minis that are hooked up. Can this be done without seeing the other computer contents? I hope that makes sense. The existing mini is 10.5.8 and the new one is 10.6.
You can start one mac up in target disk mode, get file sharing set up and then disconnect the monitor. Monitor ports are very tolerant of connecting and disconnecting with the computer on.
Switch the monitor to the other computer. Start up, connect the firewire cable (after the computer has booted) and set up file sharing on that computer. You can see the other computer's contents without controlling the other computer's mouse and/or keyboard.
If the other computer's hard drive does not automatically show up, go to network settings and verify those settings as well. That should not be necessary but ethernet would give you a second option for file transfers.
Ji~m -
WE21 File port, but I don't want carriage returns
We need to change the way we are sending some delivery IDocs. We were using an RFC destination, but now want to create a file first, then copy the IDoc text file to another server. The problem is, we can't change the map that reads this IDoc data. When I create a file port with WE21, the output file is created with a hex 0d0a (carriage-return line-feed chars) on the end of each segment. We don't want that. I could write a little script that strips those characters off, but there is another problem. The length of the segment needs to match the total of all field lengths, even if there is no data at the end of the segment. We want to see those trailing spaces. But when sending to a file port, it removes those trailing spaces and puts the hex 0d0a. Any suggestions?
Downlaods folder is a temporary internet files folder pretty much. you could just clean it out every once in a while. if you download google chrome you can just open it with google chrome. i dont think that thats an option with firefox but i could be wrong.
Hope i helped!
-Brenden -
hi,
I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open any of it 80,443 ect.
suppose If I want to use Essential server 2012 how I can solve this problem , essential wants domain name whith A record.
I asked DDNS service provider if I lease from them a domain name whith A record would that help to open or manipulate the port 80,443 they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.
so what can be a solution the ISP provider won't open this ports , how I can solve this problem . domain name with ip adres is not helping so what it's go to help?
thanks
johan
h.davidThe domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+
Maybe you are looking for
-
How can I call a static function in another static function?
/** = d, as a String, using exactly 5 characters. Precondition: 0 <= d <= 999. The truncated d will have one of the forms: ddd.d, dd.dd, and d.ddd. Examples are: 360.1, 29.50, 4.003, 0.001, and 0.000 public static String truncateTo5(double d) { // To
-
I have a Pioneer VSX-1012-K airplay amp and I want to change the name of it when i am using AirPlay. Is there any way i can do this?
-
Is there any software out there that will allow you to have streaming audio through your iWeb and web server? I know I have seen sites that had live audio, but was wondering what kind of software I would need to get and if iWeb has that kind of capab
-
Save as EPS and maintain layers?
Hi, Is it possible to save a .psd file as a .eps and maintain the layers? When I convert the file to EPS, the layers are merged. I don't see an option in the "Save As" process that would prevent this from happning. Thanks!
-
Question about personal smartphone activation
if I own my phone will Verizon require a 2 year contract to activate? or can I get a shorter contract. I would like to use it seasonally (smartphone) for credit card processing