Don't want to exit....
I don't want the control to exit from the method when it receives a null value, but still I want it to execute the remainig part of the code..... what should I do...?
Is it SAX, Dom, JAXB or something else you are talking about?
Similar Messages
-
WHERE IS THE CLOSE TAB? I DON'T WANT TO EXIT!
Before, I had a "file" tab at the top left hand corner of my menu bar. Now it is gone and replaced with an orange "Firefox" tab. When I click on the tab I get a "new tab" but I do not get a "close tab". I don't know what the "new tab" is for but I don't really care. What I do care is closing a tab and now that you have eliminated the "File" option how can I close my tab and get to my previous page?????
You can middle click a Tab or right-click a Tab and choose Close Tab or press Ctrl+W to close the current Tab.
You can also use Alt + F to open the File menu to see a Close Tab item.
Some menu entries are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or Alt+B to open the Bookmarks menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10. -
When I plugged my iPod into my macbook, a window for an iPod Touch software update popped up, so I clicked update, then it said that my iPod was over capacity or something similar to that, so basically I didn't have enough room for the update, which I thought was fine. So then once I unplugged my iPod, I was unable to use it. The screen was telling me to connect to iTunes (how it does when you first purchase an iPod, and turn it on for the first time.) So, I then connected it to iTunes and it told me I had to restore my iPod, it gave me no option other than to click "restore" But I don't want to lose everything that's on my iPod...but now I can't use it because the screen is still telling me to connect to itunes. How do I get out of restoring it?
If you have a graphic of iTunes and a cable displayed on your iDevice then it is in Recovery mode.
Check this to try an "exit"
http://osxdaily.com/2011/01/08/iphone-recovery-mode/ -
I don't want to create Invoices with net price = zero
Hello,
I use VF04 ( prog. SDBILLDL ) to create the invoices,
how to not create the invoice with net price = zero ( it's not a bug)
User exit ? Badi ?
1) I can't anticipate if the created invoice will be set to 0 (complex price schema).
2) I want to execute VF04, for these invoices, to clean the VKDFS table.
3) I don't want to delete these invoices if they are set to 0 ( making some holes in the number ranges, forbiden in some countries)
Thx a lot !
Ramdane
NB : I have posted this question on "ABAP general" thread, it was a mistake
sorryHi,
Here are the existing exits .
J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Check Badi like this for tcode VF04
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction.
6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Rhea. -
Don't want voice but phone keeps asking me!!
Hello all,
Got an n95 and just updated the maps. Tried to use the navigation but phone asks about voice guidance. Get 2 options, purchase or exit. Don't want to purchase, so exit, and it leaves the whole "start navigation" process. Am I doing anything wrong or do I have to buy voice to use the navigation??!!Unfortunately yes, you do have to buy to use navigation. I know the they call it voice navigation but they really just mean navigation.
You can however still still track your location by going to Find Location>GPS Location
The cursor will show you your current location on the map and that's it. -
I don't want my usernames remembered!
The question says it all. I not only don't want my passwords remembered, I also do not my usernames to automatically come up.
Hello gueser, check in Tools window > Privacy panel > History > if Firefox will is set to Use custom settings for history > '''UNcheck''' Remember search and form history [ ]
also see in Security panel > '''UNcheck''' Remember passwords for sites [ ]
after the above, clear cookies and cache also, go from 3-bar menu button > History > Clear Recent History… > Time range to clear > everything, and in Details check [v] cookies and cache, and then > click the Clear Now button. Exit firefox and restart it.
more : [https://support.mozilla.org/en-US/kb/settings-privacy-browsing-history-do-not-track#firefox:mac:fx36 Settings for privacy, browsing history and do-not-track]
thank you -
I don't want to fill the Actual GI Date field automatically when GI
Hi experts
When I post good issue a delivery, Actual GI Date field is filled automatically.
I don't want it.
I don't want the Actual GI Date field to be filled automatically.
Please, let me know how to.
With config or user exit, anything possible.
Thank you.Thank you for your reply Vinod.
But it's still not the exact answer I wanted.
1.
Subroutine USEREXIT_SAVE_DOCUMENT_PREPARE in MV50AFZ1 is not useful for this situation.
The field WADAT_IST(Actual GI Date) already has a value(today's date which is automatically inputted by system) in that subroutine.
So it's impossible to know whether Actual GI Date is manually inputted or not.
2.
The BADI you mentioned does not exist in our site.
Regards
Ji yeob -
Crystal report i don't want message box authentification but automatically
Hello
Escuse me for my bad english
In businessobjects crystal report 11 when I use The Url
serveur/businessobjects/enterprise11/desktoplaunch/opendoc/openDocument.jsp?sDocName=Doc_Acquisition&apsuser=Myuser&apspassword=123
The first Time I have a messagebox authentification , user password and My document
crystal report is open .
The second time i have access directly to my document ( No message box)
I would like the first time i have access to my document directly (I don't want the
message box authentification).
It's possible ?
The script are on crystal reports opendocument.jsp documentxml.jsp
yourserveur/businessobjects/enterprise11/desktoplaunch/opendoc/)
have you an example ?
I dont want display logon.do the first time
have you an solution
Can you send me an example with a script that access directly to my document
Good luck
Thank you very muchThanks Aasavari
Do you speak French ?
Thanks for example view_report --> it's Ok
I have changed the programmation to have access directly
what do you think,
When i have changed the file jsp to have access directly ( no message box logon)
the old version jsp display ?
why ? stop the services tomcat ? or stop the service crystal cache server ?
I look forward to be hearing from you
sincerely
Michel
logonform.jsp
<%!
/**************************** class LogonForm ***************************
This logon form is used to gather the logon information needed
to login to Enterprise
private class LogonForm {
HttpServletResponse response;
HttpServletRequest request;
int num_reports_needed = 1;
String[] reportname;
public static final int NONE = 0;
public static final int REPORT_NAME = 1;
public static final int REPORT_NAME_X2 = 2;
Constructor - Save the response and request objects
LogonForm(HttpServletResponse response, HttpServletRequest request)
//this.response = response;
//this.request = request;
Constructor with options - Add some optional boxes to request other
input from the user such as reportnames.
LogonForm(HttpServletResponse response, HttpServletRequest request, int extra_requests) {
this.response = response;
this.request = request;
switch (extra_requests) {
case NONE:
break;
case REPORT_NAME:
num_reports_needed = 1;
reportname = new String[1];
break;
case REPORT_NAME_X2:
num_reports_needed = 2;
reportname = new String[2];
break;
If we do not already have the logon information, print a logon form.
Return true if a logon form was printed, false if it wasn't.
public boolean display_if_needed() throws java.io.IOException {
reportname[0] = "TEST1"; // my report
return false;
%>
view_report.jsp
<%
Applies to Versions: XI
Creation Date: Febuary 28 2005
Description:
This sample to demonstrates how to view a Crystal Report on demand in
* the zero-client DHTML viewer.
Author: CW.
%>
<%@ page import = "com.crystaldecisions.sdk.occa.infostore.*,
com.crystaldecisions.sdk.plugin.desktop.common.*,
com.crystaldecisions.sdk.framework.*,
com.crystaldecisions.sdk.occa.security.*,
com.crystaldecisions.sdk.exception.SDKException,
com.crystaldecisions.sdk.occa.managedreports.IReportSourceFactory,
java.util.Locale,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"
%>
<%@ include file = "logonform.jsp" %>
<%
try {
//If logon information is required, display the logonForm and exit.
//Create a special logon form that requests 2 Report Names
//(code for LogonForm class is included).
LogonForm logonform = new LogonForm(response, request, LogonForm.REPORT_NAME);
if (logonform.display_if_needed()) return;
//Log in.
// access directly
IEnterpriseSession enterpriseSession = CrystalEnterprise.getSessionMgr().logon("Administrator","", "pa", "secEnterprise");
//Grab the InfoStore from the httpsession
IInfoStore infoStore = (IInfoStore)enterpriseSession.getService("", "InfoStore");
//Query for the report object in the CMS. See the Developer Reference guide for more information the query language.
IInfoObjects oInfoObjects = (IInfoObjects)infoStore.query("SELECT TOP 1 * " +
"FROM CI_INFOOBJECTS " +
"WHERE SI_PROGID = 'CrystalEnterprise.Report' AND SI_INSTANCE=0 AND SI_NAME='" + logonform.reportname[0] + "'" );
if (oInfoObjects.size() > 0) {
//Retrieve the latest instance of the report
IInfoObject oInfoObject = (IInfoObject) oInfoObjects.get(0);
//Use the PS report factory to obtain a report source that will be processed on the Page Server.
IReportSourceFactory factoryPS = (IReportSourceFactory)enterpriseSession.getService("PSReportFactory");
Object reportSource = factoryPS.openReportSource((oInfoObject), Locale.ENGLISH);
session.setAttribute("reportSource", reportSource);
//View the report in the standard DHTML viewer.
response.sendRedirect("CrystalReportViewer.jsp");
else {
out.println("Report " + logonform.reportname[0] + " not found.");
catch(SDKException sdkEx) {
out.println(sdkEx);
%> -
ipod 5th gen stuck in recovery mode. Don't want to restore and lose all my data. Any help would be greatly appreciated.
I one of these programs will not kick the iPod out of recovery mode you will have to restore the iPod.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You may be able to get some info off the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Every few minutes it gives me a "not responding" message and/or it crashes. I've checked all my add-ons, they're all updated. I've tried accessing the same websites that crash on Firefox with other browsers and it works really well. I don't want to reset it as one of the troubleshooting solutions suggest because I'd rather change to another browser than having to re-install all my add-ons. Please, is there anything that can be done to fix this?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Also try to disable hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
VLAN's on 3524 VLAN enable issue (I don't want to route between them)
I have segmented a 3524 switch into three different VLANs. One is the managment VLAN 1 and the other two are for my Test Lab and Production network. I don't want either VLAN to see the other (router between them). My problem is my VLAN10 and VLAN12 will not come out of a shutdown state. They stay administratively down even after I issue the no shut command from within the VLAN Interface. What am I doing wrong here?
My guess is that you created 3 SVI's instead of creating the layer 2 vlans that you need . Do a show vlan ", do all 3 of your vlans show up ? If you created 3 different layer 3 SVI's , (conf t , interface vlan 10 and or 12 then the switch will only enable 1 because this is strictly used to manage the switch . To create your vlans I believe on this switch you need to use the vlan database. At the switch prompt type vlan database, enter. Then type vlan 10 , hit enter , then type vlan 12 and hit enter . This activates the layer 2 vlans .Exit out to the command line and do a show vlan and see if all 3 show up now.Apply the vlans to the ports as needed . These should now show up when you do a "show vlan" . I think you gettting confused between the layer 3 SVI's and the layer 2 vlans .
-
I subscribed to someone because my friends quota had been reached, not realizing that it might trigger me into Timeline. They say that public will be able to see my timeline on August 13!!! I DON'T WANT IT, don't want to look at it myself or have it represent me! How can i stop this!!! There is no REDRESS!!! other than exiting the entire thing...
Everyone is going to have their Facebook profile changed to the Timeline view in the near future.
Although you might be able to use an add-on to reformat how ''you'' see the page, that won't affect how others see your profile.
Rather than search for "hacks" that are unlikely to help, you should think about hiding any activity you don't want shown in your Timeline. Check your general privacy settings, and also scroll through your timeline and hide whatever you want hidden. If you are an active user, this could take a while... -
Don't want "click me" that has hijacked my browser
The best thing about firefox is that it did not force unwanted shite on to your computer, which for a computer numpty like me takes forever to get shot of.
Unfortunately now we have "click me". I don't want to click you; I don't ever play computer games. Why not ask me if I want this utter crap before you force it on me? Just remove it from my computer as I can't do it but you put it there so you can. Thanks very much.If you prefer not to see the snippets on the about:home page or otherwise experience problems with a snippet then you can set the <b>browser.aboutHomeSnippets.updateUrl</b> pref to an empty string on the <b>about:config</b> page.
Delete the <b>storage\persistent\moz-safe-about+home</b> folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
You need to close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder) -
When I try to close Firefox, an error box pops up with the message "If you exit now, 1 download will be canceled. Are you sure you want to exit?" I click on "Cancel 1 remaining download." (The other option is "Don't exit.") But the next time I try to close Firefox, the message pops up again. What can I do?
You can check the Downloads folder in the Downloads Manager (Library; Show All Downloads) for unfinished downloads.
*https://support.mozilla.org/kb/Downloads+window -
I don't want to share my apple id with my family anymore but I own over 2000 songs and a few other things I bought so would I be able to get them if I got a new apple id?
You don't. Everythng downloaded with one Apple ID can not be transfered to another Apple ID. So you would need to buy it a second time. This is one of the Pit Falls of the whole Download only model.
That is why I refuse to buy things like music or movies that are tied to a specific User Name, ID.
Maybe you are looking for
-
Hi: After filling out the Apple troubleshooting form, I followed the advice and took my machine to an authorized reseller/service center. They recommended an archive and install, plus a new and larger HD(WD Caviar 750: he said it would not take a la
-
Formula Column in Matrix Report (Running Balance)
Hi all. I hope somebody can help me. I am working on a matrix report using multi-query data models. The report has 2 groups in the horizontal axis and 3 groups in the vertical axis. The intersection is not just a single row but may consist of multipl
-
Debugging in SQ02 (Sap Query Report)
Hi All ; I want to learn that ,how can I debug a sap query report.I added some fields to the query with code. How can I reach that code by debugging ?Thanks for your reply. Regards. Fırtına.
-
Error 'Enhancement RSR00001 already belongs ....'
Hi, While creating a project in CMOD, while assigning an Enhancement RSR00001 it displays an error 'Enhancement RSR00001 already belongs to project Y....'.
-
I have lightscribe installed on pc with win 8.1; which burning software will work with it?
Do I need burning softwareware something like Nero to accompany my lightscribe files?