Don't want to use my flash as a slave.

I want to use my 430 ex ii on my Canon 7D mk ii, can I disable my pop up flash forever?

If a flash (or actually anything) is in the hot-shoe on your 7D, the camera will not attempt to raise the pop-up flash. Hiding under one of the leaf-springs on the hot-shoe rails there is a tiny micro-switch. When you attach anything to the hot-shoe, it presses the micro-switch and the camera realizes you've attached something (even if it's not actually a flash). The camera will not attempt to raise the pop-up flash when the hot-shoe is being used. This is automatic and there's no need to do anything to your camera menu to tell it you'd prefer to use the 430EX II instead of the pop-up flash. Also... you can use the pop-up flash as a trigger to fire the 430EX II if it is located off camera. The 430EX II can function as an E-TTL "slave" but cannot function as a "master". The manual explains how to enable this mode.

Similar Messages

I don't want to use Flash with Safari. What can I do to replace it?

I don't want to use Flash with Safari. What can I do to replace it?

I have same question

Don't want to use flash. Want it like so...

Hello. I am trying to add a .mov file and a .wmv file to my
website. I don't want to use flash because I like it better when
its done like it is on this site:
www.wintersoldierfilm.com (go to "view trailer" for the
example)
Can anyone give me instructions on what I need to do in order
to have my videos appear exactly the way they do on that site?
Thanks in advance. I know this is probably a long one.

"Osgood" <[email protected]> wrote in
message
news:edgm2n$rrd$[email protected]..
> Martin wrote:
>
>>>The answer is in the code:
>>>
>>>Windows Media Player:
>>>
>>><td bgcolor="#FFFFFF" align="center"
valign="middle"><embed
>>>src="images/winter_soldier_trailer.wmv"
width="320" height="255"
>>>align="top" border="0" loop=false autoplay=true
controller=true
>>>pluginspage="
http://www.apple.com/quicktime/"
kioskmode="true"></embed>
>>></td>
>>>
>>>
>>>
>>
>> Surely that's an error - Quicktime cannot play
Windows Media Video i'm
>> sure.
>> The pluginspage pointing to apple.com would be no
good if the person
>> trying to view the WMV video didn't have the
required codecs installed?
>
> I don't know. Both played ok for me on a Mac. Im not
aware that I have any
> additional codec installed to handle one or the other. I
just have real
> player and windows media player.
>
Thinking about Windows Media Player i think the flawed code
would not
matter - Windows Media Player will generally (automatically)
contact
Microsoft to look for any codecs that are required but not
installed.
Martin.

HT201454 How do you handle family members outside the household being a part of the Family Sharing program? I don't want them using my credit card for itunes and/or apps on their phones - just want to be able to share pictures/videos.

Wanted to include my sister and parents in the Family Sharing group under the iCloud app, but I don't want them using my credit card for their purchases. We just wanted to be able to share pictures and/or videos and find each other, if necessary. Is there a way around my card being the default for them when they go to purchase something?

If you don't want your sister to make purchases on your credit card, then Family Sharing is not an appropriate way to do what you want. You can use Find my Friends to locate each other and you can use Shared Photo Streams to share photos.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

I used to use CS5 and I want to use the Acrobat version on my new iMac.
How can I find my serial number for Adobe Acrobat 11. I don't want to use the new version at £18.00 per month. I don't need it. Thank you

Hi Anthony Aduhene
Please refer : Find your serial number quickly

I don't want to use microsoft products on my mac!

Dearest Apple,
What can I say, I am a massive fan of your work. I have totally bought into your brand....
My problem is I don't want to use microsoft software on my gorgeous shiny mac, or any of my apple products for that matter. The issue is I don't appear to have any choice if I want to communicate professionally with the rest of the business world.
I love the new mac mail in OS X Lion, but when I send an email to an outlook user it looks like Johnny age 5 composed it.
I'm not asking for much from you IT giants, why can't you get together and agree on a code/platform/whatever it needs to make emails (which in my opinion don't appear to be the most complex of documents) backward compatable. Nearly everyone has an email signature with some text and a small graphic, what's so hard about having the end user display that correctly?
Then there is iWork, again a lovely product to work in, you could argue not quite as powerful as excel, but it works. Albeit you can't lock documents etc when sending them to 'PC users'
When are we likely to see a change?
All I want is to use my mac and software specific to it without having to subscribe to the awful giant microsoft.
Thanks
B
P.S dam you make some fine products ; )

Product Feedback

Don't Want To Use Apple Config, Device Enroll Program

I have been reading a lot on how to implement profiles onto devices like the iPhone, this functionality is what I am looking for, mainly with iPhone for some businesses and schools I work with. I have red that with the new technology you don't have to us Apple Configurator, and I have red about the Device Enroll Program... for my purposes I don't want to use any Apple method (nor would the situation I have even qualify for the Device Enroll Program) I really would like to deploy custom configuration profiles, with restrictions specified by my customers.
I have been scanning the developer guides and and slowly grasping what I need to do...it sounds like I don't need to use Apple methods if I don't want CORRECT??? If I can implement custom profiles and in some cases it might just be three iPhones... I was hoping to find the proper guidance for implementing those custom profiles, thru the webpage method or e-mail message is more suitable for my needs.
I found the Apple play by play on how to do that, but sometimes for myself finding another perspective helps me learn... Any places anyone has found that can give that play by play on how to deliver those custom profiles thru web page or e-mail?
I have looked at the Over the Air Profile Delivery and Configuration Developer Pages... I'm just looking for that alternate information source to help me out. Appreciate all the help

Using Get Info to change all documents to open with Pages 4.3 doesn't work. The Mac OS will always default to the newest installed version & has for as long as I can remember. It will work on individual files, but that could be a lot of files to reset.
This is what worked for me. After I installed the new iWork updates I created a folder on an external drive & named it "Applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.
Since the last update I've used the solution Peter Breis posted (4th post in that thread) in iWork Tips 'n' Tricks with a little "tweak."
Making Numbers '09 the default whilst keeping Pages 5
1. Move any new iWork apps in another clearly labelled folder (I created a new folder in Applications & named it iWork 13)
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
2) Move the new iWork folder into the trash (temporarily)
3) Select any Numbers file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
4) Re the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
IMPORTANT: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.

HT204053 How do I set up a second Apple ID? Our office wants to use the iCloud calendar, but I don't want to use my personal Apple ID.

How do I set up a second Apple ID to use iCloud? My office is going to use the iCloud calendar on our PCs and I don't want to use my personal ID. Thanks for any suggestions.

You really don't want to do that, operate an iPad with 2 different ID's.
I'm presuming you have a work iPad and you want to put some non work bought apps on it. You will have issues, like half the iPad not working while the other half does.
Probably not something you want to explain to your IT department.

How can I (automatically) import new photos of the photostream on my local disc (Mac)? Don't want to use new icloud service. Simply import.

New Photo app on Mac.
How can I (automatically) import new photos of the photo stream on my local disc (Mac)? Don't want to use new icloud service. Simply import.
With iPhoto every new photo was automatically imported and saved on my local disk (with "full resolution" that's what I only need). In the new photo app I have still my photo stream and when I move a photo (drag and drop from the photo stream) to a new album it indicates a (plus). My understanding is that the photo is now copied to my local disk. But when I deleted the photo in the photo stream it was also deleted in the album !?
If that is the case I can use the photo stream only until I reach the max of 1.000 photos, then I have to delete photos and I will have no copy left.
How can I "physically" copy a photo of the photo stream to my local disk? I just want to "transfer" all pictures taken with Ipads, Iphones to my central storage on the Mac. Please don't propose to connect it via iTunes (cable) to the Mac.
Any other suggestions?
thx
-Tom

The amazing device cannot do it because no amazing developer has written an app for it. There is some interest, others have asked, but i have a hunch that the market is fairly limited, and no developer has jumped at the chance just yet.
Any sort of tethered approach means try to feed the material to the pad thru the cck. Which means the app would have to use the allowed/existing cck pathway in a manner that does not violate the sandbox rules. That may be the problem.

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

What do you mean a moderator

How I can change ma pay method in iTunes if I don't want to use my credit card?

How I can change my pay method y iTunes if I don't want to use my credit card?

The iTunes Store sometimes requires it even if the card wouldn't be charged; if it actually gets charged and you're not trying to gift the songs, ask the iTunes Store staff for assistance.
(113277)

Maverick won't permit syncing Address Book or Calendar by USB to iPhone or iPad and permits only syncing by iCloud, which I don't want to use. Any ideas on how to sync without using iCloud?

Maverick won't permit syncing Address Book or Calendar by USB cable from my MacBook Air to my iPhone and iPad and permits syncing only by iCloud. Mountain Lion permitted this via the Info tab on iTunes. I don't want to use iCloud. Any ideas with Maverick on how to sync Address Book and Calendar from computer to iPhone and iPad without using iCloud?

ymcneil - thanks for the work around. But isn't it amazing Apple forces us to do this to maintain our privacy.
I live in Australia where there are good privacy laws protecting citizens. I do not want to be forced to use iCloud when the data sits in the USA with weaker privacy laws and also able to be seen by the US Government under the Patriot Act. Further I suspect Apple will interrogate my contacts and calendar for commercial purposes and I do not want that either.
I chose to synch my calendar and contacts with my iphone and ipad. I have relied for years on carrying around my phone with my diary on it. I can no longer do that.
Whoever made this decision at Apple has to be someone who knows little about the world. I can actually see EU regulators getting very annoyed by this.
I too woud like the itunes mac to iphone/ipad local backup given back.
In the meantime - thanks for the work around

How do I only use the wifi internet because I don't want to use my mobile data because I don't have Internet on my price plan?

How do I only use the wifi internet because I don't want to use my mobile data because I don't have Internet on my price plan and its costing me money?

Well, if you are running iOS 6.0 or later.
The option supposed to be in Settings>General>Cellular>Cellular Data---Off & Enable 3G---Off
I think you'd better check the settings in Privacy>Location Services.
Some items in it need Cellular data like"setting time zone" and "Find my iPhone'.

Don't want to use new Numbers, but 'get info' fix doesn't work

Hi All,
I made the mistake of installing the new Numbers a month or two ago. I don't want to use the new Numbers because I need to work on the same documents on older machines that won't work with the new Numbers. On my machines with both versions of Numbers, I want to be able to just double-click on the documents and open with the older version. The usual fix is to use get info on a document, select the app I want to use for this type of document and then hit 'change all' for that type of doc. Well that's the theory at least. I've found that this setting doesn't stick in this case. (I've never seen this not work). It still opens with the new Numbers.
I've tried removing Numbers, but Software Update keeps nagging that there is an update available jfor Numbers, and wants to reinstall it. They 'dumbed down' Software Update so that you can't remove updates you don't want to be bothered by. (I hate it that Apple continually removes features, then adds them back in a year or two!) So I'm stuck.
Any one else have this happen? Any fixes?
Thanks!

Using Get Info to change all documents to open with Pages 4.3 doesn't work. The Mac OS will always default to the newest installed version & has for as long as I can remember. It will work on individual files, but that could be a lot of files to reset.
This is what worked for me. After I installed the new iWork updates I created a folder on an external drive & named it "Applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.
Since the last update I've used the solution Peter Breis posted (4th post in that thread) in iWork Tips 'n' Tricks with a little "tweak."
Making Numbers '09 the default whilst keeping Pages 5
1. Move any new iWork apps in another clearly labelled folder (I created a new folder in Applications & named it iWork 13)
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
2) Move the new iWork folder into the trash (temporarily)
3) Select any Numbers file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
4) Re the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
IMPORTANT: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.

Don't want to use my flash as a slave.

Similar Messages

Maybe you are looking for