Donde consigo las imagenes del modulo DSC del labView 2009

Buenas amigos foristas, necesito su ayuda para conseguir la imagenes que trae el modulo DSC de labview 2009, porque estoy desarrollando un proyecto donde utilizo imagenes como valvulas, tuberias, tanques, etc. y en labview 2009 estas imagenes son mas reales que el labView 8.2 en el cual estoy desarrollando el proyecto, les agradeceria su colaboracion gracias.

From Spanish,
Good friends forumers, I need your help finding the images that brings the LabVIEW DSC Module 2009, because I'm developing a project where I use images as valves, pipes, tanks, etc.. labview and 2009, the images are more real than the LabView 8.2 on which I am developing the project, collaboration thanks I would like some.

Similar Messages

  • Donde consigo el numero de serio del photoshop cs6?

    :S Donde consigo el numero de serie del photoshop cs6

    And exactly what is the problem? Did you actually buy the product?
    Mylenium

  • ¿Porque no tengo disponible las opciones para configurar alarmas en variables compartidas creadas desde un ''control personalizado'' usando el modulo DSC?

    Saludos estimados colegas, tengo una pregunta con respecto al modulo DSC. Se que mediante este modulo puedo configurar alarmas si se superan o caen por debajo de los limites establecidos los valores especificados en variables compartidas (Hi: Enable/Lo: Enable), sin embargo noto que cuando creo una variable compartida desde un “control/indicador personalizado” (un cluster de números por ejemplo) no tengo disponible estas opciones. De hecho ni en el “NI Distributed System Manager” se pueden ver los valores de estas variables. ¿Como podría hacer para monitorear estas variables y agregar alarmas mediante el DSC?
    Solved!
    Go to Solution.

    Hola Jairo.Gutierrez.
    En efecto no se pueden configurar alarmas para las variables compartidas con tipos de dato complejos (como clusters o arreglos) más que la alarma de bad status. Adicionalmente, para recuperar la información de ese trace tendrás que hacerlo programáticamente, por lo que los valores no aparecerán ni en MAX ni en el DSM, aunque si se esten guardando.
    Las dos opciones que te recomiendo serían:
    1. Hacer tanto el monitoreo como el loggeo de alarmas programáticamente:
    a) Para el monitoreo necesitas usar los VI´s del toolkit DSC (Read Trace), decir que es un tipo de dato variante, y después convertir el variant a tu cluster.
    b) Para las alarmas la única manera que se me ocurre es generar eventos a partir de los cambios de valor de la variable y compararlos programáticamente con el límite, y si lo exceden loggear una alarma de usuario que si bien no esta directamente relacionada con ese trace tu puedes saber que a eso se debe la alarma.
    Para estos casos te recomiendo revisar los ejemplos del módulo DSC para que veas como manipular los traces y las alarmas programáticamente. Así puedes generar eventos a partir de cambios en las variables: https://decibel.ni.com/content/docs/DOC-4375.
    La segunda opción, que es mas sencilla, es que reemplaces tu variable compartida del cluster por variables donde guardes cada uno de los elementos del cluster. Puedes usar una convención de nombres para saber que las variables pertenecen al mismo cluster, pero tendrás toda la funcionalidad del módulo DSC sin tener que hacerlo programáticamente.
    Espero haya respondido tu duda.
    Aldo H
    Ingenieria de Aplicaciones

  • Problemas al instalar el modulo DSC y crear las Tags para el PLC

    Hola, espero que me puedadn ayudar.
    Actualmente estoy tratando de comunicar a Labview con un PLC y lo quiero realizar por OPC y el modulo DSC. Sin embargo al instalar el modulo DSC me sale un error de que ya existia el modulo, asi que checo en Tools>DSC y si esta pero no tengo el submenu de configure tags y sin este submenu no puedo configurar mis variables para el PLC ¿A que creen que se deba ? la version que estoy utilizando es la 8.2

    Hola Zeakiller es normal que no puedas encontrar este submenú en la versión de 8.2 pues en esta versión de DSC ya no se manejan las tags de la misma manera.
    A partir de la versión 8 de LabVIEW  en lugar de utilizar tags para comunicarte con tu PLC lo que se utiliza es variables compartidas. Tu programa lo tienes que crear dentro de un proyecto y ahí en una librería generas tus variables que es lo que vas a utilizar en lugar de tags.
    En la siguiente dirección hay un link a un tutorial de DSC 8.x para que puedas iniciar con tu aplicación.
    http://www.ni.com/swf/presentation/us/labview/newd​sc/default.htm
    Saludos
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Problema instalando el Modulo DSC

    Tengo un problema instalando el modulo DSC (Datalogging and Supervisory Control Module) en LabVIEW 8.5 anexo una imagen con mi poblema.
    Alguna ayuda se los agresco de antemano.
    Solved!
    Go to Solution.
    Attachments:
    Dibujo.JPG ‏50 KB

    Hola,
           La pantalla que muestras es la misma que cuando instalo el DSC RTS (Run Time Systems) que es la version para correr los ejecutables, que te instala ademas del RTS convencional las base de datos SQL y Citadel, y componentes propios del DSC.
           Me parece que estas tratando de instalar el DSC RTS sobre una máquina que tiene la suite de Desarrollo de LabVIEW y por eso el problema.
           El DSC RTS lo deberias instalar sobre una máquina sin LabVIEW.
           Por otra parte si lo que deseas es instalar el DSC sobre la suite de desarrollo debes usar son los DVDs, ya que el CD adicional es del RTS como te comente. Bueno asi lo tengo yo, espero te sea de ayuda.
    Saludos Cordiales,
    Luis A. Mata C.
    Ing. Electrónico
    Anaco - Venezuela

  • TS3899 donde consigo y como puedo instalar un certificado tls en mi iphone que es el que requiere el correo saliente de mi cuenta de mail

    donde consigo y como puedo instalar un certificado tls en mi iphone que es el que requiere el correo saliente de mi cuenta de mail

    La aplicaciones que compraste con la cuenta vieja solo podran ser actualizadas via la cuenta vieja. No hay manera de "fusionar" las dos cuentas.
    Las aplicaciones (y canciones etc) estan atadas a la cuenta de la cual se ejecuto la compra.

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software

    Please read the information at...
    Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
    Locate the execute file (WebcamDell2.exe) buried in... 
    C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
    Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
    If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
    Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
    battery back in and start the computer. Did the webcam come back?
    If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
    If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
    Please use Internet Explorer(32-bit) when navigating to  My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
    ***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
    If system does NOT register after 5 minutes, then contact Dell Tech Support.
    If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for  software update
    Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
    Rick

    Hello Rick,
    Thanks for trying to help.
    Here is the info as requested:-
    Host Name:                 DELLLAPTOP
    OS Name:                   Microsoft Windows 7 Home Premium
    OS Version:                6.1.7601 Service Pack 1 Build 7601
    OS Manufacturer:           Microsoft Corporation
    OS Configuration:          Standalone Workstation
    OS Build Type:             Multiprocessor Free
    Registered Owner:          Trevor
    Registered Organization:   Microsoft
    Product ID:                ?????
    Original Install Date:     07/07/2010, 11:46:05
    System Boot Time:          24/10/2011, 12:06:27
    System Manufacturer:       Dell Inc.
    System Model:              Inspiron 1570
    System Type:               x64-based PC
    Processor(s):              1 Processor(s) Installed.
                              [01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
    BIOS Version:              Dell Inc. A05, 23/03/2011
    Windows Directory:         C:\Windows
    System Directory:          C:\Windows\system32
    Boot Device:               \Device\HarddiskVolume2
    System Locale:             en-gb;English (United Kingdom)
    Input Locale:              en-gb;English (United Kingdom)
    Time Zone:                 (UTC) Dublin, Edinburgh, Lisbon, London
    Total Physical Memory:     2,937 MB
    Available Physical Memory: 1,399 MB
    Virtual Memory: Max Size:  5,872 MB
    Virtual Memory: Available: 4,244 MB
    Virtual Memory: In Use:    1,628 MB
    Page File Location(s):     C:\pagefile.sys
    Domain:                    WORKGROUP
    Logon Server:              \\DELLLAPTOP
    Hotfix(s):                 71 Hotfix(s) Installed.
                              [01]: 982861
                              [02]: KB971033
                              [03]: KB2305420
                              [04]: KB2393802
                              [05]: KB2425227
                              [06]: KB2475792
                              [07]: KB2476490
                              [08]: KB2478662
                              [09]: KB2479628
                              [10]: KB2479943
                              [11]: KB2484033
                              [12]: KB2485376
                              [13]: KB2487426
                              [14]: KB2488113
                              [15]: KB2491683
                              [16]: KB2492386
                              [17]: KB2503658
                              [18]: KB2503665
                              [19]: KB2505438
                              [20]: KB2506014
                              [21]: KB2506212
                              [22]: KB2506223
                              [23]: KB2506928
                              [24]: KB2507618
                              [25]: KB2507938
                              [26]: KB2508272
                              [27]: KB2508429
                              [28]: KB2509553
                              [29]: KB2511250
                              [30]: KB2511455
                              [31]: KB2515325
                              [32]: KB2518869
                              [33]: KB2522422
                              [34]: KB2524375
                              [35]: KB2525694
                              [36]: KB2529073
                              [37]: KB2530548
                              [38]: KB2532531
                              [39]: KB2533552
                              [40]: KB2533623
                              [41]: KB2534366
                              [42]: KB2536275
                              [43]: KB2536276
                              [44]: KB2539635
                              [45]: KB2541014
                              [46]: KB2544893
                              [47]: KB2545698
                              [48]: KB2547666
                              [49]: KB2552343
                              [50]: KB2555917
                              [51]: KB2556532
                              [52]: KB2559049
                              [53]: KB2560656
                              [54]: KB2562937
                              [55]: KB2563227
                              [56]: KB2563894
                              [57]: KB2564958
                              [58]: KB2567053
                              [59]: KB2567680
                              [60]: KB2570791
                              [61]: KB2570947
                              [62]: KB2572077
                              [63]: KB2579686
                              [64]: KB2586448
                              [65]: KB2607712
                              [66]: KB2616676
                              [67]: KB958488
                              [68]: KB976002
                              [69]: KB976902
                              [70]: KB976932
                              [71]: KB982018
    Network Card(s):           4 NIC(s) Installed.
                              [01]: Realtek PCIe GBE Family Controller
                                    Connection Name: Local Area Connection
                                    Status:          Media disconnected
                              [02]: Intel(R) WiFi Link 5100 AGN
                                    Connection Name: Wireless Network Connection
                                    DHCP Enabled:    Yes
                                    DHCP Server:     192.168.1.254
                                    IP address(es)
                                    [01]: ????
                                    [02]: ????
                              [03]: Microsoft Virtual WiFi Miniport Adapter
                                    Connection Name: Wireless Network Connection 2
                                    Status:          Media disconnected
                              [04]: Cisco Systems VPN Adapter for 64-bit Windows
                                    Connection Name: Local Area Connection 2
                                    Status:          Hardware not present
    Hope that this will help.
    Thanks again
    Regards
    Trevor

  • No se ven las imagenes, can't see photos on iphoto '11

    las fotos que tengo puestas en iphoto no se cargan, y se ven todas las imagenes asi:
    Alguien sabe que podria hacer para solucionarlo????
    Gracias

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • Luego de la actualizacion CC2014 desde Ligthroom no se abren las imagenes seleccionadas para editar en HDR Pro.

    Buenos dias, hago HDR desde Ligthroom, desde la actualización a cc2014 al lanzar las imagenes para editar en HDR Pro en Photoshop, este se abre pero las imagenes no aparecen. En el Portatil si funciona, como soluciono el problema, Ojala no haya que desinstalar el lightroom por los presets que tengo. Saludos.

  • Migrating large project from DSC 7.1 to LabView 2009 Shared Variables ... What's the next step after recreating my variables?

    I am in the process of migrating a large distributed (multi-workstation) automation system from the LabVIEW 7.11 DSCEngine on Windows XP to the LabVIEW 2009 Shared Variable Engine on Windows 7.
    I have about 600 tags which represent data or IO states in a series of Opto22 instruments, accessible via their OptoOPCServer. There are another 150 memory tags which are used so the multiple workstations can trade requests and status information to coordinate motion and process sequencing.  Only one workstation may be allowed to run the Opto22 server, because otherwise the Opto22 instruments are overwhelmed by the multiple communications requests; for simplicity, I'll refer to that workstation as the Opto22 gateway.
    The LabVIEW 2009 migration tool was unable to properly migrate the Opto22 tags, but with some help from NI support (thank you, Jared!) and many days of pointing and clicking, I have successfully created a bound shared-variable library connecting to all the necessary data and IO.  I've also created shared variables corresponding to the memory tags. All the variables have been deployed.
    So far, so good. After much fighting with Windows 7 network location settings,  I can open the Distributed System Manager on a second W7/LV2009 machine (I'll refer to it as the "remote" machine henceforth) and see the processes and all those variables on the Opto22 gateway workstation. I've also created a few variables on the remote workstation and confirmed that I can see them from the gateway workstation.
    Now I need to be able to use (both read and write) the variables in VIs running on the remote workstation machine. (And by extension, on more remote workstations as I do the upgrade/migration).
    I have succeeded in reading and writing them by creating a tag reader pointed at the URL for the process on the Opto22 gateway. I can see a way I could replace the old DSC tag reads and writes in my applications using this technique, but is this the right way to do this? Is this actually using the Shared Variable Engine, or is it actually using the DataSocket? I know for a fact that attempting to manipulate ~800 items via Datasocket will bog down the systems.
    I had the impression that I should be able to create shared variables in my project on the remote workstation that link to those on the Opto22 gateway workstation. When, however, I try to browse to find the processes on that workstation, I get an error saying that isn't possible.
    Am I on the right track with the tag reader? If not, is there some basic step I'm missing in trying to access the shared variables I created on the gateway workstation?
    Any advice will be greatly appreciated.
    Kevin
    Kevin Roche
    Advisory Engineer/Scientist
    Spintronics and Magnetoelectronics group
    IBM Research Almaden

    I have found the answer to part of my question -- an relatively easy way to create a "remote" library of shared variables that connect to the master library on my gateway workstation.
    Export the variables from the master library as a csv file and copy that to the remote machine.
    Open the file on the remote machine (in excel or the spreadsheet app of your choice) and (for safety's sake) immediately save it with a name marking it as the remote version.
    Find the network path column (it was "U" in my file).
    replace the path for each variable (which will be either a long file path or a blank, depending on the kind of variable) with \\machine\'process name'\variable name
    where machine is the name or ip address of the master (gateway) workstation (I used the ip address to make sure it uses my dedicated automation ethernet network rather than our building-wide network)
    and process name is the name of the process with the deployed variables visible in the Distributed System Manager on the gateway machine.
    NOTE the single quotes around the process name; they are required.
    The variable name is in the first ("A") column, so in Excel, I could do this for line 2 with the formula =CONCATENATE("\\machine\'process name'\",A2)
    Once the formula worked on line 2, I could copy it into all the other lines.
    Save the CSV file.
    Import the CSV into the remote library to create the variables.
    Note: at this point, if you attempt to deploy the variables, it will fail. The aliases are not quite set properly yet.
    Open the properties for the first imported variable.
    There is probably an error message at the bottom saying the alias is invalid.
    In the alias section, you'll see it is set to "Project Variable" with the network path from step 4.
    Change the setting to "PSP URL" with the same path and the error message should disappear.
    Close the properties box, save the library, and then export the variables to a new CSV file.
    Open the new CSV file in Excel, and scroll sideways to the NetworkrojectBound field.
    You'll notice it is False for the first variable, and true for the rest. Set the field FALSE for all lines in the spreadsheet.
    Scroll sideways... you'll notice there are two new columns between NetworkrojectPath and Network:UseBinding
    The first one is NetworkingleWriter; it should already be FALSE for all lines.
    The second one is Network:URL. That needs to be set equal to the value for each line of NetworkrojectPath.
    You can accomplish this with a formula like in step 4. In Excel it was =U2 for line 2, and then cut and paste into all lines below it.
    There is a third new field, Path, which should already be set to the location of the variable library. You don't need to do anything with it.
    Save the edited CSV file.
    Go back to the remote library, and import variables from the just-edited remote library CSV file.
    Once you have imported them and the Multiple Variable Editor opens, click on done.
    You should now be able to deploy the remote variable library without error. (Make sure to open the Distributed System Manager and start the local variable engine. It took me a few failures before I realized I had to do that before attempting a deployment).
    Voila! You now have a "remote" library of shared variables that references all the shared variables on the master machine, and which should be deployable on other machines with very little difficulty.
    It actually took longer to write out the process here than to perform these steps once I figured it out.
    Kevin Roche
    Advisory Engineer/Scientist
    Spintronics and Magnetoelectronics group
    IBM Research Almaden

  • Porque Flex no actualiza las imagenes del servidor!?

    Tengo una base de datos donde tengo guardado el directorio donde esta ubicado una fotografia, por medio de la interfaz de usuario que hice en Flex hago la solicitud de borrar la imagen que esta ubicada en un servidor remoto. La ejecución se lleva con exito, puesto que al revisar en el servidor remoto la imagen ha sido eliminada con exito. (el Script que estoy utilizando esta en PHP y funciona perfectamente).
    El problema radica que al consultar la imagen en la interfaz de usuario, esta ahi se encuentra todavia. Es como si estuviera en memoria cache... lo raro es que al cerrar la aplicación y al volverla abrir... la imagen ya no esta!!!!...
    como repito.. es como si la imagen que imprimiera fuera todavia de la memoria cache porque en el servidor remoto esta imagen ya fue borrada... he utilizado una metaetiqueta Bindable y aun asi persiste el problema. he utilizado las propiedades cachePolicy en off y aun asi me persiste el problema.
    en espera de sus valiosos comentarios...

    Babelfish translated as follows:
    Why Flex does not update the images of the servant?
    I have a data base where I have kept the directory where this located a
    photograph, by means of the user interface that I did in Flex I make the
    request erase the image that this located in a remote servant. The execution
    takes successfully, since when reviewing in the remote servant the image has
    been eliminated successfully. (the Script that I am using this in PHP and
    works perfectly).   The problem is that when consulting the image in the
    user interface, this is there still. It is as if it was in memory breaksŠ
    the rare thing is that when closing the application and when returning abrir
    itŠ to the image this no longer! Š   as I repeat. it is as if the image that
    imprimiera outside still of the memory breaks because in the remote servant
    this image already was erasedŠ I have used a metaetiqueta Bindable and even
    so the problem persists. I have used the properties cachePolicy in off and
    even so the problem persists to me.   awaiting its valuable commentariesŠ
    End of original message
    That sounds like it could just be caching in the browser or in memory.  If I
    request and image, especially if I use a caching tool like SuperImage, then
    I choose to delete that image, if I request that image again, I might see it
    come from the cache until I close the application and the cache goes away.

  • Donde encuentro las funciones del teclado del imac?

    Como encuentro el signo mas en el teclado wireless del imac?

    Como siempre que se use el teclado QWERTY SHIFT y la tecla =.

  • Instale las fuentes, y estan dentro del catalogo tipografico pero no me aparecen en illustrator...que hago??

    Alguien me dice que hago para poder usar la fuente??

    Supongo que tienes articulos los cuales tienen por default un valor en cantidad de stock minimo, ésto dentro del catalogo de articulos, pestaña inventarios.
    Lo que creo que podrias hacer es en una hoja de calculo poner tus columnas de item y la cantidad que contaste
    posteriormente realizar un query donde traigas la informacion  de stock minimo para dichos items (los que vas a contar)
    Comparalos y te daras una idea de cual estas contando que queda por debajo del stock minimo

  • Donde se guarda la copia de seguridad del iphone en el mac?

    donde hace itunes la copia de seguridad en el macbook air???

    Usted necesita comprar un Super Drive USB para copia de seguridad de la biblioteca de iTunes
    Apple USB SuperDrive - Apple Store

Maybe you are looking for