~~[DONE]~~ Installing Oracle 10g Rel. 2 on linux distros...
Hello guys,
I wanted to ask if anyone of you tried to install oracle 10g release 2 for personal use on any linux distro (free distros).
If yes which linux did you try?
Message was edited by:
sysdba
Choose the Linux distribution that makes you feel most comfortable. At the Linux level, there is very little difference between fedora core 4 and SUSE linux 9.2 (if there is, they are not allowed to use the label Linux). At the 'other stuff thrown in' level, which makes it a distro, you need to decide which is going to make you happiest.
In any case, installing Oracle in Linux means you need to have the prerequisites set up. That means a specific version of the kernel, a specific set of libraries and a specific set of installed applications. If you have those, you follow a specific set of steps to install.
Werner Puschitz helps you figure out the specific prerequisites at ttp://www.puschitz.com ... if you can not understand the prereqs and steps, then you might want to spend more time learning Linux basic admin until you are more comfortable otherwise you will get into some trouble down the road.
Message was edited by:
forbrich
Message was edited by:
forbrich
Similar Messages
-
Error While Installing ORACLE 10g in Redhat Linux 5.0
Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev GeorgeSajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?
According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?
Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported. -
This problem appears while installing oracle 10g on enterprise linux
Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp' -
Cannot install Oracle 10g rel. 2 on Win Server 2003 SB
Hello,
I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN errorRegards
SiyavuşYou should be connected as a local administrator to perform the install process.
Try to perfom a software only install, then once you make sure the installation was successful, launch the dbca. It is important for you to use a local account to perform the installation and db setup process, otherwise, if you have authentication problems, even if you comment the authentication line at the sqlnet.ora file you will be facing issues that will make fail the assistant, since it is designed to work assuming the user is OS authenticated.
~ Madrid
http://hrivera99.blogspot.com/ -
Not able to install Oracle 10g Express on linux 64bit based on Dude's intr
I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AMIt looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto -
How to install oracle 10g on suse linux
Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html -
Installing Oracle 10g in Enterprise Linux 4
Hi friends,
I dont know how to install oracle 10g express edition in Enterprise linux 4.
Am new to linux environment.
And i have downloaded the rpm file from oracle website.
Please help me...
thanks in advance....Hi Sunil
Please find the below link
http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html
you can install by these steps.
Regards
Khan -
Installing Oracle 10g rac on linux 4 using vmware :problem
Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaanhi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp -
Problem with installing Oracle 10g on Suse Linux
Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fictionYes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again. -
Error at installing Oracle 10g database on Linux 5.4 (64 bits)
Hello:
I'm installing Oracle 10.2.0.1 on Red Hat Enterprise Linux Server release 5.4 (Tikanga), kernel 2.6.18-164.el5 #1 x86_64 x86_64 x86_64 GNU/Linux.
I get the following error in OUI at the link phase:
Error calling target 'agent nmo nmb' of makefile '/opt/oracle/product/10.2/sysman/lib/ins_sysman.mk'
Here, the errors I found in the make.log file:
make -f /opt/oracle/product/10.2/sysman/lib/ins_sysman.mk relink_exe EXENAME=e2eme
make[1]: se ingresa al directorio `/opt/oracle/product/10.2/sysman/lib'
gcc -m32 -trigraphs -fPIC -m32 -o /opt/oracle/product/10.2/sysman/lib/e2eme -L/opt/oracle/product/10.2/sysman//lib32/ -L/opt/oracle/product/10.2/lib32/ -L/opt/oracle/product/10.2/lib32/stubs/ /opt/oracle/product/10.2/sysman/lib32/nmaj.o /opt/oracle/product/10.2/sysman/lib32/nmajclbk.o /opt/oracle/product/10.2/sysman/lib32/nmajrules.o /opt/oracle/product/10.2/sysman/lib32/nmajutl.o /opt/oracle/product/10.2/sysman/lib32/nmajout.o /opt/oracle/product/10.2/sysman/lib32/nmajsm.o /opt/oracle/product/10.2/sysman/lib32/snmajutl.o /opt/oracle/product/10.2/sysman/lib32/snmajmn.o /opt/oracle/product/10.2/sysman/lib32/snmajpt.o /opt/oracle/product/10.2/sysman/lib32/ssnmajed.o /opt/oracle/product/10.2/sysman/lib32/libnmadbg.a /opt/oracle/product/10.2/sysman/lib32/libnmadm.a /opt/oracle/product/10.2/sysman/lib32/libnmalk.a /opt/oracle/product/10.2/sysman/lib32/libnmarl.a /opt/oracle/product/10.2/sysman/lib32/libnmasf.a /opt/oracle/product/10.2/sysman/lib32/libnmastk.a -lxml10 -lcore10 -lnls10 -lunls10 -lclntsh -Wl,-rpath,/opt/oracle/product/10.2/lib `cat /opt/oracle/product/10.2/lib32/sysliblist` -ldl -lm -lpthread -lnsl -lm -ldl -ln10
/opt/oracle/product/10.2/lib32//libnls10.a(lmsagb.o): In function `lmsagbcmt':
lmsagb.c:(.text+0xa3): undefined reference to `SltsPrRead'
lmsagb.c:(.text+0x10a): undefined reference to `SltsPrUnlock'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsagb.o): In function `lmsagb1':
lmsagb.c:(.text+0x47e): undefined reference to `SltsPrUnlock'
lmsagb.c:(.text+0x48a): undefined reference to `SltsPrWrite'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsamts.o): In function `lmsamtsini':
lmsamts.c:(.text+0xa5): undefined reference to `SltsPrInit'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsamts.o): In function `lmsamtster':
lmsamts.c:(.text+0x255): undefined reference to `SltsPrDestroy'
/opt/oracle/product/10.2/lib32//libnls10.a(lxldlbb.o): In function `lxldlbb':
lxldlbb.c:(.text+0x37f): undefined reference to `slste2a'
/opt/oracle/product/10.2/lib32//libnls10.a(lxlfrd.o): In function `lxladjobj':
lxlfrd.c:(.text+0x551): undefined reference to `slste2a'
lxlfrd.c:(.text+0x147d): undefined reference to `slste2a'
lxlfrd.c:(.text+0x1510): undefined reference to `slste2a'
lxlfrd.c:(.text+0x15aa): undefined reference to `slste2a'
/opt/oracle/product/10.2/lib32//libnls10.a(lxlfrd.o):lxlfrd.c:(.text+0x1607): more undefined references to `slste2a' follow
/opt/oracle/product/10.2/lib32//libnls10.a(lxlgsz.o): In function `lxlgsz':
lxlgsz.c:(.text+0x82): undefined reference to `lcvb2w'
/opt/oracle/product/10.2/lib32//libnls10.a(lxocmpst.o): In function `lxoCmpStr':
lxocmpst.c:(.text+0x3a3): undefined reference to `lmebucp'
/opt/oracle/product/10.2/lib32//libnls10.a(slms.o): In function `slmspe':
slms.c:(.text+0x6c5): undefined reference to `slcgems'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdj.o): In function `lxscdja':
lxscdj.c:(.text+0x1a4): undefined reference to `slmaacb'
lxscdj.c:(.text+0x1bc): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdj.o): In function `lxscdjl':
lxscdj.c:(.text+0x3dc): undefined reference to `slmaacb'
lxscdj.c:(.text+0x3f1): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdt.o): In function `lxscdth':
lxscdt.c:(.text+0x125): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdt.o):lxscdt.c:(.text+0x13d): more undefined references to `slmaacb' follow
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2e.o): In function `lxecg2e':
lxecg2e.c:(.text+0xb0): undefined reference to `ldxnbeg'
lxecg2e.c:(.text+0xf2): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x270): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x2d7): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x493): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x681): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x6b7): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2i.o): In function `lxecg2i':
lxecg2i.c:(.text+0xf0): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x120): undefined reference to `ldxdfd'
lxecg2i.c:(.text+0x164): undefined reference to `ldxdtd'
lxecg2i.c:(.text+0x204): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x231): undefined reference to `ldxdtd'
lxecg2i.c:(.text+0x314): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x340): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2l.o): In function `lxecg2l':
lxecg2l.c:(.text+0x13f): undefined reference to `ldxnbeg'
lxecg2l.c:(.text+0x16f): undefined reference to `ldxdtd'
lxecg2l.c:(.text+0x48b): undefined reference to `ldxnbeg'
lxecg2l.c:(.text+0x4b7): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libunls10.a(lxu4tstc.o): In function `lxu4TstClsXMLPubidChar0':
lxu4tstc.c:(.text+0x8b4): undefined reference to `lxpTstClsXMLPubidCharTbl'
/opt/oracle/product/10.2/lib32//libunls10.a(lxu4dec.o): In function `lxu4Decomposition':
lxu4dec.c:(.text+0x18b): undefined reference to `lxujmd'
collect2: ld devolvió el estado de salida 1
make[1]: *** [opt/oracle/product/10.2/sysman/lib/e2eme] Error 1
make[1]: se sale del directorio `/opt/oracle/product/10.2/sysman/lib'
make: *** [e2eme] Error 2
Any ideas?
Thank you in advance,Hi albrotar,
# mount /dev/cdrom /mnt; cd /mnt/Server
# rpm -ivh libgomp-4.4.0-6.el5.x86_64.rpm \
kernel-headers-2.6.18-164.el5.x86_64.rpm \
glibc-headers-2.5-42.x86_64.rpm \
libstdc++-devel-4.1.2-46.el5.x86_64.rpm \
sysstat-7.0.2-3.el5.x86_64.rpm \
glibc-devel-2.5-42.x86_64.rpm \
libaio-devel-0.3.106-3.2.x86_64.rpm \
gcc-4.1.2-46.el5.x86_64.rpm \
gcc-c++-4.1.2-46.el5.x86_64.rpm \
elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm \
elfutils-libelf-devel-0.137-3.el5.x86_64.rpm \
libtermcap-devel-2.0.8-46.1.x86_64.rpm \
readline-devel-5.1-3.el5.x86_64.rpm \
unixODBC-2.2.11-7.1.x86_64.rpm \
unixODBC-devel-2.2.11-7.1.x86_64.rpm \
glibc-devel-2.5-42.i386.rpm \
libaio-devel-0.3.106-3.2.i386.rpm \
unixODBC-2.2.11-7.1.i386.rpm \
unixODBC-devel-2.2.11-7.1.i386.rpm \
compat-db-4.2.52-5.1.x86_64.rpm \
compat-gcc-34-3.4.6-4.x86_64.rpm \
compat-gcc-34-c++-3.4.6-4.x86_64.rpm \
gdb-6.8-37.el5.x86_64.rpm \
libXp-1.0.0-8.1.el5.i386.rpm \
libstdc++-devel-4.1.2-46.el5.i386.rpmdid you installl all this packages?
Cheers,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-RHEL-5.4-x86_64.php -
Error in installing oracle 10g Rel 2
Hi,
When i install Oracle 10.2.0.1 in linux i get the below error,
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/10.2.0/network/lib/ins_net_client.mk'.
Details of my server:
[oracle@mail ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/10.2.0/db_1
[oracle@mail ~]$ uname -a
Linux mail.redhat.com 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux
[oracle@mail ~]$ tail -15 /u01/app/oracle/product/10.2.0/db_1/install/make.log
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x13f): In function `lxecg2l':
: undefined reference to `ldxnbeg'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x16f): In function `lxecg2l':
: undefined reference to `ldxdtd'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x48b): In function `lxecg2l':
: undefined reference to `ldxnbeg'
/u01/app/oracle/product/10.2.0/db_1/lib32//libnls10.a(lxecg2l.o)(.text+0x4b7): In function `lxecg2l':
: undefined reference to `ldxdfd'
/u01/app/oracle/product/10.2.0/db_1/lib32//libunls10.a(lxu4tstc.o)(.text+0x8b4): In function `lxu4TstClsXMLPubidChar0':
: undefined reference to `lxpTstClsXMLPubidCharTbl'
/u01/app/oracle/product/10.2.0/db_1/lib32//libunls10.a(lxu4dec.o)(.text+0x18b): In function `lxu4Decomposition':
: undefined reference to `lxujmd'
collect2: ld returned 1 exit status
make[1]: *** [u01/app/oracle/product/10.2.0/db_1/sysman/lib/e2eme] Error 1
make: *** [e2eme] Error 2
Can anyone help me out.What is the linux version ?
Try to help you with the reading of http://www.puschitz.com/
Nicolas. -
Having problems in ocfs2 while installing oracle 10g rac on linux as 4
this is the frist time i am try to install oracle rac based on three PCs after installing ocfs2 when i try to configure nodes through console i see the following msg "Could not start cluster stack .this must be resolved before any OCFS2 file system can be mounted "
Please check the user guide
http://oss.oracle.com/projects/ocfs2/dist/documentation/01-cluster_start_stop.pdf
Regards
Jason -
Installing Oracle 10g on Enterprise Linux 4 Update 5 Media Pack for x86_64
Hello everyone,
I'm trying to determine whether the required rpm packages are installed on the new EL 4, and it seems after running the query using the # rpm -q there are packages missing.
According to the install section from the Doc Library these packages must exist in Red Hat Enterprise Linux 4.0 for 10g to install successfully. My guess is, if RHEL 4 needs to have it, then Oracles Unbreakable should too... right?
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
Has anyone had experience doing such an installation, and if so, what exactly is missing from Oracle's EL4 and where can I get it.Thanks Terry and Jason for your responses. I've come along on this install but ran into a little snag. Hope you two and other members can help. Here's my output from the xterm:
[root@localhost database]# ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system versions: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2007-05-22_10-52-09PM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installion if the user is root.
: No such file or directory
[root@localhost database]#
I don't know what to do, and weren't able to run it as user_oracle. Could you make a recommendation on how to resolve this error? Also, will I also need to make any clean-up efforts before beginning a new install?
Many thanks. -
Install Oracle 10g on Suse Linux Enterprise Server 10
Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?
Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.
Maybe you are looking for
-
How do you use an app that you downloaded on your computer?
How do you use an app that you down loaded on your computer. I am having trouble because I can download the app just fin but when I actually want to use that app I have no idea what to do. I tried to look for any open buttons but there are none. I do
-
I Can't download itunes 10.7 on Mac 0SX 10.5.8
Help needed! I've got an imac that is a coupled of years old and its currently running on OSX 10.5.8 after it just being updated. After updating it I tried to download the new itunes version 10.7 as ive just upgraded my iphone 4s to ios6. However whe
-
I'm sorry to ask something that I'm sure has been dealt with many times. I've searched all around and found many threads that seem very close, but I guess there's some little difference that always ends up confusing me. I also get confused by what se
-
Is it possible to delete the item in sales order .
Hi I have 5 items in the sales order , The delivery and billing is over . But the one line item still shows the open status . Is it possible to delete that item in the order ? Thanks, Phani
-
Temporary Fix for Smart Playlist order bug
I stumbled across a Smart Playlist that was keeping the correct order and discovered why. It was a Smart Playlist that contained 2 other Smart Playlists. The original Smart Playlists didn't keep their order but the new one that combined them did.