Dont Record message Unity 8.5

Good Afternoon
I have a CUCM 8.6 in cluster, integrated with unity conection 8.5 in cluster-pair, An caller call to an user register in unity, unavailable greeting is enabled for the user caller, but never recorded, the voice port are correct.

If I understand your question, callers are unable to leave a message for the end user. Check call action after greeting. It should be set to take message. Check also what greeting is active: standard, closed, alternate and if the the voice mail box is full as well.
Please rate helpfull answers!

Similar Messages

Pre-recorded message then hangup

Hello,
I am looking at one of our numbers and would like to have the ability to set a recorded message to play when the number is called. Then at the end of the recorded message to hand up.
Is there a way to do this from Call Manager 7? Or will I have to push it through to UCCX7?
Thanks
Trevor.

If you just need a message to be played then you could potentially do this via voicemail as well. If you have Unity or Unity Connection, you could configure a call handler (does not require a license) or mailbox for the DN and call forward all to VM. Record the appropriate greeting and set the after greeting action to hang up. When you do this, the call will be forwarded to VM where the greeting is played and then Unity/Unity Connection will immediately disconnect after the greeting.
You won't be able to do this natively with CUCM. IMO, this option is probably the easiest.
Hailey
Please rate helpful posts!

I have an ipod, ipad, and iphone. ilike to use imessage on all of them but i dont want messages to appear on the devices i am not currently using. nor do i want to have to keep a saparate account or id for eCH OF THEM. WHAT IS THE FIX?

i have an ipod, ipad, and iphone. ilike to use imessage on all of them but i dont want messages to appear on the devices i am not currently using. nor do i want to have to keep a saparate account / id for each device how do i fix the settings on each so that with the same ID / login I can chech me emails, share contacts etc, be able to use i messenger on each without the whole conversation automatically beiing picked up by my other devices? some conversations just arent intended to be shared!

Turn it into the local police department with an explanation as to who you tried to contact and what they told you. That's the only safe procedure, as otherwise the owner could report the iPod as stolen, even though you tried to return it, and get you into trouble.
Regards.

Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy

There is no source data for this data record, Message FZ205

Hi Experts,
I am facing a problem with the DME File download. This problem happened all of sudden in our production system since last month and it was never before. Our system landscape has also not been changed but as per our basis consultant he has added two-three more new application server to the Production client. Even we do not have this problem in our testing clients.
Please note that we have been using the output medium '1' from the day one and thus the system has been generating the DME in 'File System' which we download on the desktop and upload the same to the bank online. After running the payment run when we trying to download the DME File, the system gives the error "There is no source data for this data record, Message FZ205".
I tried to fix this issue through many ways but not able to. So can you please let me know the reason of this error and solution to fix this.
With best regards,
BABA

Hi Shailesh,
Please share how you solved this problem.
Many Thanks,
Lakshmi

Can I remove a "recorded message video" ?

Can I remove a "recorded message video", and if so, how do I do it?

i send video messages to my friend but i want to delete and get rid of that how?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

From where to listen the recorded messages?

Hi,
We have a network which consists of CUCM, UCCX, AQM, CUC. During after hours, if someone calls, the IVR will ask to press * to record a message. But from where shall we listen to these recorded messages?
Thanks in advance

That wouldn't be enough information to answer your question.
Are you an administrator of the phone system or a supervisor?
All of those products are capable of recording a phone call, but since you mentioned the IVR, it's like narrowed down to UCCX and/or AQM.
UCCX is playing the IVR for sure, and cannot record the call in the IVR, only once it lands on the Agent, which really just leaves AQM. But I'm guessing here, based on limited information.
If you also agree that it's AQM that is doing the recordings, which I'm not even positive it can record a call at the IVR level, then you would need to access the web interface for AQM to listen to the recordings.
If you post your IVR script from UCCX, we could see what is happening after the user presses *. Such as sending an HTTP POST to AQM or the like.

My imessage wont activate and work, and i dont receive messages from people useing imessage? how do i get imessage to work?

My imessage wont activate and work, and i dont receive messages from people useing imessage? how do i get imessage to work?

I recently moved back to Australia for school from Canada and signed up for the new iphone 6 plus. After using icloud to save and backup from my previous iphone 4s, all of the apps eventually worked....except for whatsapp. After looking through my phone and numerous chat forums, it appears that my imessage and facetime are stuck in, "waiting for activation".....is anyone else having problems with this?
I am curious as I am unable to receive the whatsapp code to re-activate my application. This brings me to my second question, is this an iphone/apple problem or a whatsapp third party problem?
I've had friends send imessages to me and they appear to coming through. I have already rebooted and restarted my phone numerous time. A strong connection to wifi and data stream have all come in loud and clear.
I have tried all of the directions that were posted and still have no whatsapp and imessage still inconsistent.
Thank you

Play pre-recorded message

Hello,
I'm trying to set up a number such that when a caller calls the number, a pre-recorded message gets played. The caller will not be able to leave a message/voicemail on this number though. Here are the steps:
1. Caller dials number
2. Caller listens to pre-recorded message
3. Caller hangs up the phone
Is the above doable with Skype? If so, how?
Thanks!

You can try the PrettyMay Call Center for Skype which can do what you want, learn more at:
http://www.prettymay.net
Want to record Skype calls, check out at:
hereandhere

4306.45 ecxceeds the limit 4209.37 in the condition record message no vk036

Dear Experts,
My user want to change price of of PO Me22n ,he is getting the error message
4306.45 exceeds the limit 4209.37 in the condition record message no vk036,
i checked the info record ,its price is zero,please advise me how to get it solved?
where can i change it to waring message? whats its impacts?please advise me.
Regards,
Varun

Hi Priyanka,
I maintained info record,its not solved my purpose,applying sap note is only solution for me.
please give me feedback
Varun
Edited by: madhu varun tirupati on Oct 16, 2010 8:49 AM

There is no site that could procure via the info record - Message no:06786

Hi,
While creating a new a Perishable article (FRIP Perishables), we are receiving the below error. Can someone help us out ?
"There is no site that could procure via the info record" - Message no:06786
Thank you!

Hello,
Please check whether you have made the price mandatory at site level in OLME > Conditions > Define Condition Control at Plant Level .
Thanks,
Venu

HT5395 I dont have messages on my macbook how do I get it

I dont have messages on my macbook how do I get it

A quick run down for other readers.
Generally speaking iChat versions have number one less than the OS version they go with.
So iChat 3 comes in OS X 10.4.x
iChat 4 comes in OS X 10.5.x and so on.
Messages continues the same numbering system Starting at version 7 in OS X 10.8
Messages 8 comes with Mavericks (OS X 10.9.x)
iChat Updates come with the OS Updates but not at every occasion.
In OS X 10.5 for example iChat 4 gets to version 4.0.9
Messages 7 gets one update during all the OS X 10.8 updates to be version 7.0.1 at the "end"
However Apple seemed to have stopped this sub numbering in Messages (it is at build three in OS X 10.9.4)
Throughout it is important that the iChat or Messages version "matches" the OS X level it is supposed to go with.
Reinstalling earlier iChat version for Install Disks then requires you run the Combo update of the OS version you are using.
You cannot do this after Apple use the App Store to Upgrade/Update and you need to Reinstall the whole OS.
10:17 pm Tuesday; August 12, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Applciation Monitor (RZ20) not recording messages

Dear SRM 7 Experts,
We are implementing SRM 7 with ECC EHP 4. We transfer Preqs from ECC to SRM via PI and Central Contracts from SRM to ECC via PI. The problem we have is that the Aplplciation Monitor in SRM 7 (RZ20) is not recording any interface errors when replication of Preqs or Central Contracts fails. What are we missing? Is there a background job that we need to run to make RZ20 record messages?
Thanks and regards
Pedzi

Hi Pedro
Give some examples.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/000c6fb5-59ac-2d10-76a4-ed17eae5366c?quicklink=index&overridelayout=true

Recorded message from Verizon

Hi folks,
I received a recorded message the instructed me to go to vzw290.com, or something like that to redeem something. I wasn't given the option to re-listen to the message, and I wasn't prepared to write anything down. I went to my account, and I don't see anything that leads me to believe I have a refund coming or anything like that. Have any of you experienced this? Could it be some kind of scam or something?
Thanks,
Barry

It's not from Verizon, it's a scam. There are numerous threads about it here.

Dont Record message Unity 8.5

Similar Messages

Maybe you are looking for