Dont want dependent requirement after MRP

hi all
I dont want dependent requirement after MRP?
means A is a header material and B.C are the component
after MRP run system should be created requirement of component item.
so wht r setting required?
plz guide me

Hi,
First you ask how can you carry out settings not to get DepReq for your components than you say system should create requirements for your components.
Please give a clearer picture of your situation and make your question more clearer.
How do you procure your goods (if you do not use MRP)?
If you do not want DepReq for your goods you can:
- remove them from the BOM (use them as text item, use design BOM - I do not know your situatio)
- you can set the MRP type in material master as 'ND' (not planned) (MM02 > MRP1)
Please give more information.
Thanks,
Csaba

Similar Messages

Purchase requisition not generate for dependent requirement after MRP run

Hello PP expert,
In our MTO scenario after MRP run planned order generate for header material but no PR generate for BOM components, (BOM not explode) when we run MRP component level in MD02 PR generate, system showing message "40- No coverage not provided by master plan" in MD04 order tree. this problem coming after when we DIMP applied. I checked some OSS note also.
Can any one provide right solution.
thanks in advance.....its urgent as client requirement.
regards,
Amit Awasthi.

Hi Amit
You must select the green star for the correct answer, in order to close the thread.
You may also select the yellow start for the helpful answers, in order to award points for those who helped you. See the blog below for more details:
How to close a discussion and why
I can see that most of your old threads are still open, therefore, I'd like to ask you to review and close them, by selecting the correct answer.
BR
Caetano

MRP type "VB" components generated dependent reqt. after MRP by sales order

Good morning to all SAP gurus
        I hav scenario for mech. industry where we r going to implement MRP run , having FERT which is MTO scenario and " PD" MRP type.and its BOM components having MRP type "VB" with no strategy type. At MRP run after creating sales order system generated purchase requisition for components(ROH) depends on sales order requirements along with reorder point PR. So please help me system shouldn't generate PR depends on sales order requirements should create as per reorder point PR only.
       EX.   To manu. 1 nos of FERT (PD) required 1 nos of ROH (VB) . we r creating sales order of 10 nos. , reorder pt is 11 and
stock is 15. after mrp run system generated PR for 10 nos which is dependent for sales order.
       Pls elaborate regarding above scenario. Thanks in advance.
Regards
siva

Dear
Practically speakig , system should generate special stock PR as you are dealing with MTO sales order and MRP should plan the depedent requirement accordingly based on the MRP4 -Indiviaul and Collective Indicator -1 .
But , if you do not want to consider it as special stock , then you need to assing MRP4 Individual and Collective Indicator -2 and run MRP MD02-2,1,1,3,3 .
In you case , you have already stock 15 pc and ROP -10 , so system will not genreate any PR because , it will fullfill the requurement ( 10 PC FERT -10 ROH) .Once the stock fall behind 10 , then it will trigger PR .
Hope this is clear
Regards
JH

Rounding of Decimal for dependent requirement During MRP Run

Hello Experts,
I have the following scenario:
We are currently enabling Characteristic Based Planning in our system.
Our one component is selected when two characteristic values are met through object dependencies.
Ex: Component A = Char A= '002' and Char B ='002'
Now we have given the following Usage Probability for the two characteristic:
Char A = 20%
Char B = 15%
And the total PIR quantity is 25 Pcs for Configurable Header.
With the above usage probability and PIR Qty, We have a dependent requirement of 0.75 Ea
((20% X 15%) of 25 Pcs) = 3% of 25 Pcs = 0.75 Ea of the component
Now during MRP Run I want to round the dependent Requiremnet to 1 Ea instead of 0.75 Ea.
Any suggestion towards the solution will be appreciated.
Regards,
Vinod

Hi Vivek,
As mentioned we are using Characteristic Based Planning.
The component is selected based on a Selection comdition which is as follows:
Component 721290201000 = $PARENT.BCS_RL_LINE_LOADER = '002' and $PARENT.BCS_RL_WAFER_VENDOR ='002'
When the above two conditions are met the component is selected.
In Characteristic Based Planning we give percentages (Usage Probabality) to the characteristic values like:
$PARENT.BCS_RL_LINE_LOADER/'002' =20%
$PARENT.BCS_RL_WAFER_VENDOR/'002'= 30%
For the Parent which is a KMAT Material we maintain the PIR say 40 Qty.
Now the component qty is calculated as follows:
721290201000 =(20% X 30%) of 40 Qty of parent
721290201000 =(6%) of 40 Qty of parent
721290201000 = 2.4 Qty of component is the dependent req.
Now my requirent is to round the dependent requirenment to 3 during MRP Run. Please note that the purchase requisition got from the above dependent requirement is rounded to 3 qty.
Now I want to round the dependent requirement.
Regards,
Vinod

Dependent Requirements Planning

Hey Gurus,
I have a situation in which I have two materials that are planned with Independent requirements but also have dependent requirements against them. these two materials are 6001116 and 6001771. I have set the MIXED MRP indicator to "1", planning strategy "40" and MRP Dep. requirements as "1".
6001116 is not planning the dependent requirements and is only being planned by the independent requirements. 6001771 is planing both the dependent requiremnets and the independent requirements even though I have set the MRP Dep. requirements to "1". The only difference between these two materials is that 6001116, is a made in house product and the 6001771 is a purchased product.
I can't think if anything else that would control this to put me in this situation. Do you guys have any ideas for me or things that I should check to make sure that this is working correctly? I thought it was only the Dep requirements indicator that controlled the planning of independent reqs.

Dear,
You donot want dependent requirements
to be created" for your components when MRP is run
There are three Options:
First Option:
For the all respective components in MRP 4 view Input "1" for MRP Dep.Reqts
Second Option:
In the Basic Data 1 view maintain the X-Plant Matl Status maintain "01"(Blocked for Procurement/Whse)
Third option,
You can set the MRP type in material master as 'ND' (not planned) (MM02 > MRP1)
Then Planned orders/Purchase requistions will not be created for the components
Regards,
R.Brahmankar

What is Dependent Requirement????

Hello all,
Can anybody tell me what is DEPENDENT REQUIREMENT in MRP??? I am running MRP for my material and the MD04 transaction is showing some dependent requirement. Altough the results in MD04 are correct, I didn't understand what is this dependent requirement since I am basically a MM guy, not PP. So if any one of you know what is this dependent requirement please let me know. Also tell me what is its purpose??\
Thanks and Regards,
Umakanth.

Dear umakanth Rao,
Let's assume A is our finished product or final product,and I plan to produce 100 quantity of A.
For producing 1 quantity of A let's assume I need 1 quantity of B & 1 quantity of C,where B & C are raw-
materials or bought outs.
So after entering the planned independent Requirements for my product A in T code MD61,after taking
MRP run in MD02 for the material A,the system generates the planned orders for A and Purchase
Requistions for materials B & C for 100 quantity as per the BOM,so here B & C are the dependent
requirements.
Also check the below link,
[Dependent & Independent Requirements|Requirements]
Regards
Mangalraj.S

Defalut Document Type assignment for PR after MRP RUN

Hi,
I want to know we have 6 types of different document types , i want to know after MRP RUN i want to assign a document type how to do setting for this like for each plant i want to assign diffrent document type after MRP RUN, also if we have not made which will be the defalut doc. type after MRP RUN for PR
regards,
zafar

Dear Zafar,
Go to
Spro-Materials Management-Consumption-Based Planning-Planning-Procurement proposals-Define External Procurement-MRP Group-Under Doc Type SPO you can maintain your default doc types in front of your plant.
Now run MRP.
It will work.
Regards
Utsav

MRP dependent requirements indicator

Hi,
Can anybody please let me know use of MRP dependent requirements indicator in MRP4 view?
Regards,
Samir Wadajkar

Dear,
You only use this indicator in connection with planning strategies for make-to-stock production, assembly planning. Note that the indicator Dependent requirements not relevant to MRP should only be used when, for example, planned independent requirements exist for an assembly.
EX... If you manufacture the chemical product say named ABC and you use water as component to manufacture it , and you dont want to plan the WATER quantity as it is used in bulk . So you can exclude the material water from the MRP run and only the Chemical product is planned and not the WATER.
Edited by: Girishprasad Subhash Pawar on Jun 24, 2010 9:13 AM

MRP Planned order generation for Order reservation excluding Dependent Requirements

In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

Hi Uli,
Suppose i have Sales order--100 kgs for FG
B.O.M levels
1.FG-----M.T.O
2.SFG1---M.T.O
3.SFG2---M.T.S
4.SFG3---M.T.S
5.ROH
So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
Now my requirement list would be
FG-100kg planned order
SFG1-100kg planned order
SFG2-100kg dependent requirement.
Now suppose i have partially converted SFG1 planned order to production order
SFG1--100kg planned order to 30 kg production order
Now my requirement list would be
FG-100kg planned order
SFG1-70kg planned order & 30 kg production order
SFG2-70kg dependent requirement & 30kg order reservation.
Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
Now my requirement list would be
FG-100kg planned order
SFG1-70kg planned order & 30 kg production order
SFG2-30kg planned order & 70kg dependent requirement.
SFG3-30kg planned order
ROH-30kg Purchase req
Client requirement is like these..

MRP: how to segregate the planned orders by dependent requirements

Hello SAP Guru's,
I would like to know if this is possible to make the MRP work is this way:
- generate global planned orders (by date) for several dependent requirements, for inhouse production;
- AND generate individual planned orders for each dependent requirement, for external procurement;
For the moment, it is grouping the quantities of all the dependent requirements to generate a unique planned order by date.
But we would like to get separate planned orders for each dependent requirements that are externally procured.
Do you think it is possible to do so? and if yes, how?
Thanks in advance for your help on this subject.
Regards,
Rudy

In MD04 the demand n supply that is seen is considered as plant segment. In some cases when you plan demand n supply for a given storage location separately it is called as SLoc segment, also if you're working with MRP areas then its called mrp area segment, likewise for project & sales order.
In short it is just a way MRP would do its planning. In normal cases, the demand n supply is in plant segment, so in this segment the least resolution that you can work with is a day, so all demand on a given day is clubbed together and a supply proposal is made (depending on the lot size).
If you want further split on a given day, then MRP needs some way to identify the difference & this is provided by the special stock segment such as project segment. To see how it works, if you're working with PS module, ask your PS colleague to create a demand for the material from different projects for a given day. Then in MD04 you will see each project demand show up in different segment & when you run MRP, you will see the results.
I guess more than me writing quite a lot out here, a simple test at your end should help clarify... good luck

How system calculate the required qty. after MRP RUN

Hi,
I want to know if we are using MRP Type as PD and also we are calculating automatic saftey stock and re order point qty. after MRP RUN according to which rule formula system calculate the safty stock, reorder point qty. and the required qty. as a PR.
and if we are not using calculate safety stock automatically and if we set safety stock qty. manually in this case how system will calculate the required qty.
regards,
zafar

please check the below links.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6f/b441a9a1b011d3a82d0000e82a3c24/content.htm\
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d256344af11d182b40000e829fbfe/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/515c4749d811d182b80000e829fbfe/content.htm
please check the above links may get some idea.
Regards,

After capacity leveling dependent requirement s to be adjusted

hi
iam planning a fert product on 30 th agust for 100nos
created md61 -pir for 100 nos
done mrp run at mdo2 and got scheduled dates for 100nos which has gone beyond the requirement date as i was chhosed leed time scheduling and made dependent reqirement proposal for the order operation date.
here the important thing is the work center which i nedd to produce was fully engaged inthe period (schedule period which system proposed) .hence i made capacity leveling and planned order dates were changed again
which are actual producion dates
after capacity leveling my planned order was firmed
my problem here is the dependent requirement proposal date also
need to be changed with respect to firmed planed order.
how to achive this
i tried with opu5
but no changes in dependent reuirement proposal (planned order)
plz suggest
sasikanth
vst-it projects

hi
i tried it but unfortunatly it is creating a new planned order and giving exemption messge to the firmed planned oder as cancel the proposal
which is not at all acceptable
means for a single PIR
i made mrp run AND got planned order , after leveling the planned order was firmed
means my pir was satisfied with this
i made mrp run without changing PIR dates and quantity by expecting that it should propose a new dependent reqirement
but system created a new planed order to pir date which sholud not happen.
plz elobrate your view
sasikanth
vst-it projects

Dependent requirements for Top level materials planned in MRP

Hey Gurus,
A top level material 20350 has a component 30397 and both of these materials are planned in APO. We have another top level material 30399 (but this material is planned in MRP) and the component 30397 (is planned in APO) will the dependent requirements from material 30399 be populated in APO for material 30397?
Sincerely,
Kris

Kris
As Datta has mentioned the dependent demand will not reflect for the component material in APO. We had the same scenario as yours and this is what we did
We modified the Planned order integration model filter criteria by adding custom logic in the BAdI CIF_INT_MODEL. The logic was to query the BOM tables in R/3 and find out all parents that have SNP relevant materials as components and include these parents in the list of materials for which planned orders are to be CIF'ed from R/3 . The BAdI will be invoked when you run the IM generation .
You also have to CIF the BOM to APO . Once the PDS and planned orders are available in APO , the dependent demand will be created automatically. ( If you do not want to modify the BAdI then you can write a query and identify the parents and add them to the integration model manually)
Thanks
Saradha

For iphone users with att, can you block incoming texts all together? After paying $20 for data i dont want to pay as i go/pay more for texts

For iphone users with att, can you block incoming texts all together? After paying $20 for data i dont want to pay as i go/pay more for texts

SMS is exchanged over the same network as calls - no data involved.
MMS requires data.
iMessage requires the same as email - internet access via an available wi-fi network or via your carrier's cellular data network.
You can disable SMS/MMS altogther with your account by requesting this with AT&T. You can turn iMessage off unless your iPhone is connected to an available wi-fi network.

How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices

How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices.

Plug it into your computer. Tell it to sync with "this computer" instead of iCloud. You shouldn't have to remove any apps. Otherwise, you can save the app data by using i-FunBox ( http://www.i-funbox.com/ ) just go to the "devices" tab and select 'user applications' and select all of your apps and tell iFunBox to "copy to pc" you're done! You have them all backed up.

Dont want dependent requirement after MRP

Similar Messages

Maybe you are looking for