Dont work keyframing to export video

I'm doing keyframing, to move a video or an image on the screen. The canvas looks good, but when I export the video, moves to jumps. Why did this happen? So far I had worked well, but I going to make the last video, this began to happen.

Hi Al:
Set to "easy setup", 29.97 fps and HDV Apple Intermediate Codec 1080i60, the result is similar (video jumps). My MacBookPro has two graphics cards. I have exchanged between them and I can see a better result with the NVIDIA GeForce 9600MGT card. With the NVIDIA GeForce 9400M card the video with many jumps.
Another test that I have done is to export the video with "using quicktime conversion", options in H264 and size in HD 1280 x 720 16:9. With the exported video with these parameters, almost not seen the jumps.
Can it be the problem in the processing power or memory graphics card?
Carlos

Similar Messages

Adobe Flash Media Encoder dont work with Easycap usb video capture

Hy...
I installing ADFME 3.2 but it dont work with Easycap usb video capture.
The ADFME crash.
Can you help me?
tks
Marco Aurelio

Hi Kyngg,
Can you advise how you managed to resolve this problem?
I'm having a very similar issue.
Thanks,

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.
I get messages like:
ERROR 1
-Error Loading Media: File Could Not Be Found
http://i.imgur.com/5OaxOFC.jpg
ERROR 2
-Video can't be played because file is corrupt.
http://i.imgur.com/cqRpJOp.jpg
Before I start, I will like to point out some things Ive tried already so this doesnt end up being a back and forth of things already tried.
*Ive uninstalled adobe flash player
*Ive tried the whole
media.windows-media-foundation.enabled to false or to true
*Ive gone into safe mode and nothing
*Ive tried toggling off the plug-ins to see if anything I have problems with works. Nothing.
All the media that plays from different various players:
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed <-- 2 embedded videos that both play.
All the media that wont play:
http://www.jwplayer.com/ <---- that front page video : I get ERROR 1 for this
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA <--- I get ERROR 1 for this
And every vine and instagram video. Since I will be asked to post something from it here is something from vine and something from instagram
https://vine.co/v/OqxKQBJd3lm <---- I get a still image
http://instagram.com/p/up3CG6ooDP <----- I get error 2 if I go into page info and click the media tab and look for the video.
All my enabled plugins:
http://i.imgur.com/9fCZ1s2.jpg
Everything on my permissions even on the pages of the media I cant play is set to : Use Default.
Now, I thought this was just some kind plug-in problem, I even thought it was just something with the updated made Firefox incompatible with some of the webplayers. Of course I found out this was wrong. Keep on reading:
If your flash plugin crashes or if you terminate/end process in the Task manager, your video will be replaced by this grey message:
http://i.imgur.com/vudnNIM.jpg
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
Now, all these videos I listed before, If I had them all open in tabs and then proceeded to terminate my flash plugin in Task Manager, they would all be replaced by that grey message window that the plugin crashed.
Now, after I updated firefox to 35.0, if I did the same thing
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
These three would show that grey message and these are the ones I can play
But these 2 the ones I have a problem with.
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
they wont even be affected by it. Its like they arent even using the flash plugin.
Whenever I would terminate/end process my plugin from my task manager in 34.0 EVERYTHING, EVERYTHING would not work including every vine video and instgram video, it would either show that grey message that says the plugin crashed or it would not work. They would all work again when I refreshed the page. Everything, in 34.0 in my firefox was using the flash plugin.
Now, as I stated above I thought it was just some kind of webplayer and firefox 35.0 conflict that was causing these problems.
Until I saw this:
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://i.imgur.com/gCaUMXm.jpg
http://i.imgur.com/V9w7ulS.jpg
http://www.jwplayer.com/
http://i.imgur.com/dqZtoTX.jpg
They are both using the same exact webplayer. THE SAME ONE.
I can play the first one
but the video in the front page of http://www.jwplayer.com/ I cant play it.
Which brings me to my final conclusion.
The reason I cant play some that fron page video of http://www.jwplayer.com/
videos from videomega.tv
and instagrams and vines
IS because of their file extension, their file types.
I went to the firefox options and clicked the Applications tab:
http://i.imgur.com/uWWKelX.jpg
http://i.imgur.com/HYBjwdZ.jpg
http://i.imgur.com/IK4C2WR.jpg
Shouldnt all those video file types be in : Use Shockwave Flash (in Firfox) instead of : Always ask
When I try to toggle it to something else I dont even get the option to use Shockwave Flash
http://i.imgur.com/gTH18S1.jpg
In Conclusion, what gives??
-In 34.0 Everything worked.
-If I terminated/ended process the Flash plugin in 34.0 everything would be affected by it , either by not working anymore or showing me that grey crash message.
-This all started when I upgraded to 35.0
-Has nothing to do with webplayer conflicting with 35.0 as proven above.
-The reason for all of this not working is the type of video extension they have. Judging from the examples I gave of the things I cant play, it would seem I cant play mp4, flv and whatever vine uses. Which I think its mp4 as well.
Anyways, how do I fix all this so it works like it did before I upgraded to 35.0

I looked at that but it only shows for Windows 8.1 , 8.0 , 7 , i have Vista , 64 bit Ultimate , would the Windows 7 one work ?? , or am i out of luck ?
And what plug-in icon in the address bar ?? , i don't see anything that pertains to any plug-ins
This is a example of one of the videos i was trying to watch , basically when you click the arrow in the center , it just goes away for a second then comes back and the video never plays , it just sits there , in the lower left corner i see a small popup that says javascript;
http://instagram.com/p/zAA6W8DAR9/?modal=true

The videos from my ipod does not transfer to itunes in my macbook pro they dont work it says The document "REGGAETON GRAN MIX 5.avi" could not be opened. The movie is not in a format that QuickTime Player understands.

the videos from my ipod does not transfer to itunes in my macbook pro they dont work it says The document “REGGAETON GRAN MIX 5.avi” could not be opened. The movie is not in a format that QuickTime Player understands.what shoul I do?

You need to convert the .avi file - http://www.snowfoxsoft.com/tutorial/how-to-convert-avi-to-itunes.html
MJ

Fcp X share export media export video & audio but I simply can't work with audio

I simply wanna (and even tried to) save a movie using whichever codec, I make sure to set it up on "export video & audio", but I cannot do anything on audio since the audio file format won't be highlighted (just like if there was no sound on a video & audio file !!) It works if I choose an "audio only" file, but that's not what I want - I want to export video & audio. !!!
Is it a matter of codec or a preference setting... I just cant figure out !
Has anybody ever got the same trouble?
Cheers

It was set to Surround and 48Khz. I set it to Stereo (and 44.1Khz for good measure, as that is the sample rate of my soundtrack) and then re-exported to H.264, and now the audo is perfectly centered.
So that's perfect, thanks.
Now the only thing wrong with FCPX is how it crashes every ten minutes or so!

Some programs and video files dont work.

Some programs and video files dont work, get a crash report everytime I close, even after an uninstall everything and re install.
So I try playing some videos and it gives me an error, which I can watch on Chrome. Soundcloud doesnt seem to work, again works on chrome, and before I could watch WebM's but now it says not supported MME. Also everytime I close I get a crash reporter. I tried uninstalling and reinstalling but nothing seems to work. I just happened recently. Also cant play soundcloud. Tried everything, feeling like going to chrome where things work and support is actual support

Protected mode works on some systems and not others. Since two of your four crash reports were related to Flash, I thought it was worth a try, but it's up to you whether you want to try it.
I'm not sure whether the issue with WebM video is a setting issue or a program files issue or a system issue.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Don't delete anything here. Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, choose a name like TESTING, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Any better results with WebM video or shutdown?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.
'''Clean Reinstall'''
A regular reinstall may leave some stray files in your programs folder. This method is a bit cleaner.
(1) If needed, download a fresh installer for Firefox 30 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox.
(3) Rename the folder
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Does Firefox behave more normally?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* C:\Program Files (x86)\OldFirefox\Plugins
* C:\Program Files (x86)\OldFirefox\browser\plugins

Embed H.264 exported videos in Powerpoint 2010

Hello,
We are using CS 5.5 on Windows 7 x64. Our videos are exported using the H.264 format.
The problem is:
We can embed the video in powerpoint (assumed quicktime is installed) but when we want to play it in the presentation, it simply shows a black screen, audio works. The weird think now is, when I fast-forward for at least one time, it works. It only shows a blackscreen if you dont fast-forward for atleast one time.
The problem could be solved, by installing the k-lite codec pack, but since we are sending presentations to other people, outside of our company, this isnt a solution.
I checked it on Windows 7 x64 and x86 with office 32 bit and quicktime, I get always the same result.
Anyone else having trouble to get their H.264 exported videos working in powerpoint 2010?
Thanks in advance
Malte

As for using the solution in post 8 above, this has problems. If you change to ipod multiplexing, then the quality of the exported video is quite a lot worse than a normal MP4. You get crawling noise on fine detail and an odd pulsing of the noise every few seconds. (This is related to the keyframe setting.) I have a video here that students shot in a forest, lots of fine detail in the tree trunk bark and all the leaves on the tree and the floor. With the Adobe YouTube H264 preset (1080p25 @ 8Mbps) the end result is fine but can only be used in Mac PowerPoint 2011 and not windows PowerPoint 2010. (2013 version has not been rolled out here.) If I repeat the export, changing only the multiplexing setting from standard to ipod then you see artefacts in the exported file. It does work in windows PowerPoint 2010, but its not a clean export.
Back to wmv for windows and mp4 for mac, until 2013 PowerPoint arrives and then we try again.

Exporting Videos in Premier Pro CS4

hey all!
When I go to export my finished video it asks to set all the properties like the codec and its details, res and all that jazz - I was wondering, is it not possible to have the exported video use the exact same properties as the original? It seems like I HAVE to re-encode it...
I dont want to risk losing any video or sound quality so why do I have to change the videos codec? Is there no way of just using the source video properties?
Any info would be great, cheers guys!

Nexus,
One thing to consider with Export, is what do you plan on doing with the resulting file?
If, for instance, you need to get the Exported material onto an iPod, you would work within the restrictions of that medium, and set your Export to match that. If you are going to BD (Blu-ray Disc), you would work within the specs. of that medium - and so on, and so on.
What is your intended delivery medium?
If it is to exactly (as close as you can) your source footage, except with the edits and additions, then sticking with the same format/CODEC and size settings will get you what you need.
Let your needs dictate your Export settings. Remember, you can Export to many different settings, so you will not have to do any conversions, of the original Export.
Good luck,
Hunt

Export video from iMovie with maximum iPod Touch quality specs

We got an iPod touch to playback short films (made in iMovie) using Apple's composite video cable connected to a projector.
The published *TV and video* specs on the iPod touch webpage shows what the iPod Touch should be capable of playing back the following:
[1] +- H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;+
[2]+- H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;+
[3]+- MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats+
Exporting from iMovie using the *Share > Export Using Quicktime...* option and adjusting the settings to match any of those above creates files that iTunes refuses to copy to the iPod.
iMovies' *Share > Export Movie...* and iTunes' *Advanced > Create iPod or iPhone version* create videos with a bitrate of only ~1.6Mbps - both of which don't look great projected on a big screen.
Has anyone had any success exporting video at the published 2.5Mbps spec AND been able to copy them to the iPod Touch?
Thanks!

Figured out how to get HQ 2.5mbps video on the iPod Touch.
By changing one of the options in iMovie's "Export using Quicktime..." option: "Export: Movie to MPEG-4 > Options... > Video Options..." resulted in a file that works on the iPod.
Here's a screenshot of the settings: http://readingpsc.org.uk/files/ipodtouch-hq-export.gif
Select the 'Baseline' profile ONLY (deselect the default 'Main' profile) and the iPod Touch will accept the file at 2.5Mbps - and, oddly, even bitrates higher than that, I managed to put a 20Mbps file on the iPod Touch.
Here are some test files:
4:3 - http://readingpsc.org.uk/files/ipodtouch-test-2500kbps.mp4 (6.9mb)
16:9 - http://readingpsc.org.uk/files/ipodtouch-test-wide-2500kbps.mp4 (6.9mb)
Hope that helps someone out there!

Cannot export video's from iphoto '08

I want to export videos in mp4 format that were imported from my camera into iphoto '08.
The first problem is that "export..." won't work. I selected the 7 videos, then "Export...". I selected file format. However, it doesn't recognize that anything has been selected and grey's out the "Export" button.
So, I came up with an alternate plan...burn them to a cd. I selected the same 7 videos and then "burn" section from the "share" menu. It prompts me for a cd, which I inserted. Then, I see a report that these 7 video's take 90MB of space...I hit continue and the cd is burned. However, when I look at the cd later(and I have done this twice now), the cd doesn't have any of the videos, but it does contain the 172 photo's that are in the same album. Again, I did this twice. I selected the album, then typed mp4 into the search window, then selected the 7 resulting videos. And the program was telling me it had 7 photos.
I am VERY frustrated that I have found 2 bugs in this software. I used to be able to export video's all day long. Not good.
Since I am complaining now, the only reason I am doing any of this is because I want to give my friends a CD with all the photos and videos from our recent trip. They have a mac...should be piece of cake. It is not, because the video's just sit in iphoto, but I can't do anything with them. I wish slide show would seemlessly integrate photo's and video in order. My Sanyo camera does this, but my Mac doesn't. I tried sending all the photo's and video's to iDVD, and it worked, but that takes hours to do all the rendering...and at the end of the day, the quality isn't as good.....
Please help.
Thanks,
Phil

Phil
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Issues with exporting video from MacBook Pro to flash drive

I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers. For some reason the files are not playable, even with quicktime. They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer. I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong? They play on the Mac using Flip player but not quicktime!
Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats. Only video.
Message was edited by: gmob25

hmmm.. the files from GoPro are already mp4 format. The Flash is already FAT32, brand new 16gig...
I am new to Macs but have no problems with PC's. I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software? That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked! I tried every format I could find using Video converter ultimate software, which is excellent.
And the problems began when quicktime wouldnt play the file, the screen was black.

How to export videos from Final cut?

I woud'l like to know what is the best way to export a video of 34min from Final Cut? after I'm gonna burn at Toast! and in Toast should I chose "dvd" or "video_TS"?
I tryed already export with "sequence quicktime" and DV PAL 48 kHz and burn with "DVD", but didn't work.
And export with "via le compression quicktime" in sequence quicktime, burn with "DVD and DivX" and didn't work too!
Can somebody help me?
thanks a lot

my sequence is in Final Cut yet. The problem is, is an art work and every time I have to show somewhere, is diferents DVD players, so I tryed to play the one (exported by quicktime) in a dvd player quite old and actually worked but very bad, with errors! So, I trying to find a way more universal!! that I can play anywhere! Should I export by "compresseur" and Mpeg2 something like this, or "compresseur quitktime" and .avi??
thanks
Rafaella

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Still image pixel aspect ratio wrong in exported video (but correct in Premiere renders)

I've saved a targa still image from my footage and added it to the bin. It's properties show as follows:
Image Size: 1440 x 1080
Pixel Aspect Ratio: 1.3333
This correctly matches my sequence settings as I'm working with 1080p widescreen footage.
The image appears as expected in the Program window both before and after rendering previews. However, once I export my sequence as a video file, the still image is squashed (displaying incorrectly):
A work around would be to stretch out the still to a width of 1920 in Premiere so that the export displays it back at its normal aspect ratio - which works - but I don't understand why I should have to do this.
The other solution I found was to go to the bin and 'Modify > Interpret Footage' and although "Use Pixel Aspect Ratio from File" already shows the correct settings, to actively reset it (to the same pixel aspect ratio) with the 'Conform to' option:
This works too.
Surely a bug?
(using Premiere Pro CC)

Thanks for the quick reply. But then why does the still's properties (in my bin) show the pixel aspect ratio as 1.3333 (not square pixels, 1.0) and should it not appear incorrectly in both the preview renders and the exported video ? This seems inconsitent to me.

Dont work keyframing to export video

Similar Messages

Maybe you are looking for