DONT WORK PLEASE HELP
Ok I bought it installed it used online chat and then they called. I cant understand what they are saying on the phone I speak English. Have bad hearing and just couldnt understand half the words so here we go.I have a linksys wmp54g - wre54g live in a apartment and do not have access to router use a cantenna super antenna. I get a signal of nothing to 12 mbps at best so got the wre54g ver2 to try to get a better signal. Now when I hooked it up I got 2 networks shown in my profile section and can connect to the web. No signal boost as of yet. The expander shows 2 blue lights indicating a lock on a router that says it is a linksys channel 6 2.437 ghz infrastructure disabled auto 192.168.1.102 255.255.255.0 192.168.1.1 68.87.85.98 enabled 00-16-B6-D7-AB-71 I try to load the software every way I can think of what happens is it boots the connection right before it looks for a connection then says you are not connected to a wireless system what the hell? Yes I know how to enable in wzc or in linksys dosnt work try to use the addy bar with 192.168.1.240 times out wont load page My pc cant see the expander but the connection works the expander sees the router when it is in the back room but not my pc and yes I have reset it. Set it up next to my pc then it didnt see the router or the pc. Im at a loss and I know a little about doing this stuff maybe enough to mess something up so please help. And last this is a new unit that I bought on ebay
try pinging range expander and router from the same computer, if it doesn't gives any reply or timed out...try other computer and try pinging R.E. and router, let me know the results.
Similar Messages
-
I have tried unistalling Firefox, deleting the folder in program files and re-installing from the latest installer (3.6.8) but still get the same error message. When I go to sites with flash apps or video they wont show but do in IE8,. I have all the latest versions. This problem has been ongoing for a few weeks now while IE8 works fine. Everytime I open Firefox I get the pop-up box with the above title and a message saying "The Instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "read". Click on OK to terminate the program.
Remove the getplus (Adobe download manager) from your computer. You don't need it; it causes problems for a lot of users. See:
http://kb.mozillazine.org/Install_Flash_(Firefox)#Windows_installation_issues
http://www.msfn.org/board/remove-adobe-getplusr-t139454.html -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
-
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
I updated to Mountain Lion and now my Parallels application no longer works; please help! What to do???
Make sure you have the latest version of parrallels. Think older versions are not compatible.
-
My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help
For a broken home button you can find your options here http://www.apple.com/support/service/
-
i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?
Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps. -
my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped -
At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!
Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone. Enter password.
If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac.
Maybe you are looking for
-
While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102"
Hi Experts, While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102". Scenerio : Have received 4 peices of this material with Goods receipt using 105 document and want to return 2 pcs back to Vendor using 122 move
-
Alright, I have a bit of a situation here. I'm wanting to get an iPhone to manage everything. All of my music, photos and videos are on my MacBook Pro at home. I also have email there as well. At work, we use Windows XP, Office 2004 and 2007. Is it p
-
Help - Set XML /XSD data source at runtime(VC2003)
The VC 2003 app loads a CR 2008 report without any issue. The CR report has an XML/XSD data source ,The spec has now changed to set XML/XSD data source at runtime. Anyone have any information /examples on changing a CR report XML data source at runt
-
Hello, In Flash, is there an option for outlining a text? For example, I type a word & want to outline the word with 1px in black. I think it's called Stroke but I can't find it Thanks!
-
Hi everyone, To study how a mortgage operates we are creating a program in Java that will imitate a bank loan. We need to create CRC cards for the first part of our project which is basically a table in word that lists the class/ methods/ Collaborati