Donu00B4t Account Depreciation Area for a specific company

We have many companys in the same Chart of Depreciation, but for a particular company i need to stop the account depreciation.
We take a look for a exit or badi to use in transaction AFABN but we saw there aren´t.
Some one know how to do that.

Hello
Please review the following note:
687988 Evaluation of operat. deactiv. company codes in next
The indicator 3 'Company code deactivated - later reporting allowed'
is only relevant regarding reporting issues for companies that
have stopped operations in previous years but still need to get
data from reporting.
Stopping operations in previous years means that values have not been
carried forward during the time up to current year because the
company was no longer functioning.
In your case this means, if your company indeed had been sold, I assume
that no more assets should exist on the company nor  was there the need
to carry forward the values. All assets should be retired and generally
be deactivated therefore.
This parameter '3' does not mean that new posting can not be done on a
company code. This parameter is only relevant regarding reporting.
regards
Ray

Similar Messages

  • Creation of depreciation area for posting of parallel currencies postings

    while i am posting f-90 asset e. auqsiation its giving error massage
    "Customizing inconsistency (contact your system administrator)
    Message no. AC496
    Diagnosis
    Company code BP01 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 60 and currency INR. There is no depreciation area of this type defined for depreciation area 01.
    Procedure
    Check your Customizing settings."

    Hi Venkat,
    Create a New Depreciation area with APC Values and Depn values identical to Value 01.
    Then goto valuation> currencies
    Specify the Use of Parallel Currencies> and assign the currency type and valuation view to the new depn area. tick the identical values
    then goto
    Define Depreciation Areas for Foreign Currencies> give the parallel currency against the depn area
    Now try doing the transaction.
    Please revert back if you still have any issues.
    Thanks,
    Vamsi

  • Post revaluation to selected depreciation area for an asset

    Hi,
    We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
    We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
    However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
    +Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
    Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.+
    Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
    Thank you,
    Karol
    Edited by: Karol on Oct 6, 2011 9:54 AM

    Hi Blaz,
    Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
    Thank you,
    Karol

  • Creating depreciation area for non leading ledger

    Hi,
    I want to configurate a depreciation area for a non-leading ledger. This is my scenario:
    01-Accounting area leading ledger. Group legder: 0L (on line)
    02- Accounintg area non leading ledger. Group ledger N1 (Area posts APC only directly)
    03-Depreciation non leading ledger. Grouo ledger N1 (Area posts depreciation only)
    Is it correct to created this 2 areas for non leading ledger?
    Thanks,
    Cecilia

    Hi Cecilia,
    additionally to my colleagues:
    For each additional set of accounting principles, you create one real  and one derived depreciation area.                                                                               
    Real Depreciation Area:                                                                               
    1. In Customizing for Financial Accounting (New), choose Asset Accounting  - Valuation  - Depreciation Areas  -Define Depreciation  Areas.                                                                               
    2.  Assign both depreciation areas to the same ledger group.                                                                               
    The ledger group you assign them to is not allowed to contain the leading ledger.                                                                               
    3.  In the Posting in G/L field, choose Area Posts Depreciation Only.                                                                               
    Derived Depreciation Area:                                                                               
    It is easiest to create the derived depreciation area using the Wizard.                                                                               
    4. In Customizing for Financial Accounting (New), choose Asset Accounting - Valuation - Depreciation Areas - Set Up Areas for Parallel Valuation.                                                                               
    5. In the Posting in G/L field, choose Area Posts APC Only.  Specify that this derived depreciation area represents the difference between the real depreciation area for parallel accounting and the        
    master depreciation area.                                                                               
    You do not have to set up a separate account set for these new depreciation areas. Instead you use the account set of the master depreciation area. In this scenario, you do not have to create any new  accounts in the chart of accounts or in the company code. You also do  not have to create a new financial statement version.                                                                               
    So a typical dep.area setting for a parallel ledger at you is like: 
    T093
    AFABER ABVOR1 AFABE1 ABVOR2 AFABE2 BUHBKT LDGRP_GL
    01...............................00...........................00............1.............0L
    02...............................00...........................00............3.............N1
    03..................+...........01............ - ............02............6.............N1
    Regards Bernhard

  • Multiple Depreciation Areas for IFRS

    Any one tell me about IFRS for Asset Accounting
    What are the required Depreciation areas for IFRS
    Regards,
    Vani.

    hi
    You should use the local rules for depreciation area 01 = local book and
    set up your group rules in another depreciation area such as 30 where you can use different GAAP & use relevant depreciation Key.
    Assign points if useful,
    regards
    sunil

  • How to calculate no.of records for a specific company Code and Transaction

    Hi All,
    Could you please help me how to calculate or count no.of records, in a table which are having a specific Company Code and Transaction Code and populate  in an output table displaying that these many records are present for this company code and Transaction code.
    The table is having the data like this:
    LOB   TRAN CODE    COUNT
    X1                             1   
    X1                              2   
    X1                              3   
    X1                              4   
    F1   NB                      5   
    F1   NB                     6   
    F1   NB                     7   
    F1   NB                    8   
    F1   NB                    9   
    F1   NB                    10  
    F1   NB                    11  
    F1   NB                    12  
    F1   NB                     13  
    F1   NB                     14  
    F1   NB                     15  
    F1   NB                     16  
    F1   NB                     17  
    F1   NB                     18
    F1   NB                    19  
    F1   NB                    20  
    F1   NB                   21  
    F1   NB                   22  
    F1   NB                   23  
    F1                          24  
    F1                         25  
    F1                         26  
    F1                         27  
        In the above table there are totally 27 records,where as the no.of records with F1 as company code and NB as transaction code are 18..so i have to display like F1 NB and 18 as one record as output.
    Thanks and Regards,
    Johny

    You can go for Control Breaks for your requirement.
    First sort the internal table by company code and transaction. Declare a counter variable.
    Now loop the internal table and increment the counter variable. within the loop use AT END OF tcode.......ENDAT. Within the control break append the counter variable as well as the company code and tcode to some other ITAB and clear the counter.
    This will give you the total number of records for a combination of co code and tcodes.
    This will be a good reference for your requirement. What I am doing here is, for each Vendor i am calculating total number of deliveries and amounts for that vendor. For every new vendor i am writing the ouput on to a list and clearing the counter variables.
      LOOP AT t_vend_prod_grp INTO fs_vend_prod_grp.
        w_total_delv = w_total_delv + 1.
        w_total_amt = w_total_amt + fs_vend_prod_grp-dmbtr.
        AT NEW matkl.
          w_mat_grp = fs_vend_prod_grp-matkl.
    * To display the material group and the header texts for the data
    * grouped by material group and vendor.
          SKIP 1.
          WRITE:  text-mtk  COLOR COL_HEADING
                                  INTENSIFIED,
                / w_mat_grp COLOR COL_NORMAL
                                  INTENSIFIED OFF.
          SKIP 1.
          FORMAT COLOR COL_HEADING ON INTENSIFIED.
          ULINE  1(54).
          WRITE:/ sy-vline,
                2 text-ven,
               12 sy-vline,
                  text-dlv,
               26 sy-vline,
               38 text-amt,
                  sy-vline,
               46 text-cur,
               54 sy-vline.
          ULINE /1(54).
          FORMAT COLOR COL_HEADING OFF INTENSIFIED.
        ENDAT.                             " AT NEW MATKL
        AT END OF lifnr.
    * To display the actual data for the grouping based on Material group
    * and Vendor.
          FORMAT COLOR COL_NORMAL ON INTENSIFIED OFF.
          WRITE: / sy-vline,
                 2 fs_vend_prod_grp-lifnr COLOR COL_KEY,
                12 sy-vline,
                   w_total_delv,
                26 sy-vline,
                   w_total_amt CURRENCY text-usd,
                   sy-vline,
                46 text-usd,
                54 sy-vline.
          FORMAT COLOR COL_NORMAL OFF INTENSIFIED OFF.
          CLEAR: w_total_amt,
                 w_total_delv.
        ENDAT.                             " AT END OF LIFNR
      ENDLOOP.                             " LOOP AT T_VEND_PROD_GRP

  • Cost-Accounting Depreciation area?

    Why is it that the cost accounting depreciation area is posted with a lower depreciation as compared to Book Depreciation area?

    It is not about the currency part, currency is the same [EUR], but in general, whenever you post, say, unplanned depr, you would post a lower amount in this area as compared to book depr area. why?
    I can think of one reason being that since cost accouning depr is for internal management accounting purpose. The unplanned depr is posted by many companies at a higher value to get the tax advantage as higher depr would reduce the book profits [taxable profits]. This is because book depr is for external reporting purpose. Now, cost accounting depr requires to be posted for internal purpose and hence is posted at a correct value [not a higher value] as the idea is to know the costs involved and not any financial gain.
    Kindly confirm, or if there is any reason, please suggest.
    Thanks.

  • Required depreciation areas for IFRS

    Hi,
    What are the required depreciation areas for IFRS in asset accounting.
    Regards,
    Vani.

    hi
    You should use the local rules for depreciation area 01 = local book and
    set up your group rules in another depreciation area such as 30 where you can use different GAAP & use relevant depreciation Key.
    Assign points if useful,
    regards
    sunil

  • How to 'force in' the Depreciation Area for an Asset after it was created

    Hi,
    When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

    try and read docu to tcode AFBN
    (if your problem is in production, consult SAP-OSS)
    A.

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • Depreciation Areas for Mexico

    Our company has a company code in USA and it follows the US GAAP Accounting. Now we have acquired a company in Mexico and carrying out the rollout. Please let me know what all the depreciation areas to be defined for our Mexico Company Code.
    Thank you

    LOok in the system for the standard chart for Mexico, it will give you an Idea as to  which depreciaiton areas are needed. then check with your client to know what they need.

  • Legacy data transfer for new depreciation area for already existing assets

    Hi all,
    I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
    I like to give Ordinay depreciation posted amount  for the current FY for these assets in AS92, but i find this field is not editable inAS92.
    Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
    Regards,
    Srinivas

    HI,
    I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
    Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
    Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
    Where in AS92, i am able to update Opeing APC Cost and Opeing  Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
    Please guide me how to update posted deprecation for new deprecaition area  in AS92 or some other way for already existing assets.
    REgards,
    Srinivas

  • 2 Depreciation Areas For Different Ledgers

    Dear All,
    I'm using 2 depreciation areas (01, 60) for different ledger (L1, L2) due to company requirements. However, during asset retirement, posted amount does not reflected correctly in Ledger 2 (depreciation 60).
    Amount displayed correctly in Asset Module but not in FI Documents. Below is the setting in OADB: -
    Area G/L Trgt Group
    01 1 - Real Time Posting L1
    60 3 - area post dep only L2
    80 6 - area posts only APC directly L2
    Depreciation were posted corectly into repective depreciation areas & Ledger.
    Please advice!
    Thanks !

    Hi,
    You have taken posting GL as 2, i.e.area posts APC and depreciation on periodic basis. In this case you have to run periodic postings "ASKBN" to update the L2 ledger.

  • Depreciation area for non leading ledger  - Posting

    Hi SAP Guru's.
    I have one project for migration to new GL ledger with scenario 7.
    I had finised configured in SAP system.
    I create new depreciation area 41 is for nonleading ledger and need to post to GL ledger.
    Now in depreciation area 01 , system had finished dreprciation posting run on period 05 already.
    When I run AFAB , system not allow me to repeat post on period 01 , 02, 03 and 04.
    Can anyone point me to the solution?
    Thanks in advance for your great help.
    Regards,
    May.
    Edited by: May Wu on Jun 17, 2010 7:22 AM

    Thanks first.
    ASKB was "Periodic Assets posting" but in our IMG the G/L posting indictor of prallel depreciation area was 3 (only post depreciation) and 6(only APC directly).
    The setting was configured through the SAP wizard "Setup Areas for Paralle valuation".
    Can you give further advice?

  • HIDE AREAS FOR COUNTRY SPECIFIC ESS

    Dear Expert.
    I have the following issue.
    In the company we have  employees in several country. For one of this country some Areas ie. Career and Job will be not enabled.
    I found issue similar  and a solution in the following post:
    [Applications of ESS    |Applications of ESS]
    In the previus post:
    Bala Suggests
    Do  an implicit enhancement in this Fm HRXSS_SER_GETMENUDATA to hide the area for a particular country
    Tiberiu Sasu  Suggests:
    You create two overview area group pages in the backend: ZAreaA and ZAreaB. ZAreaB does not contain the service link to Travel and Expenses
    in roleA you configure the iView "Overview" to point to ZAreaA
    in roleB you configure the iView "Overview" to point to ZAreaB
    The question is:        
    If I use the option of Tiberiu, when the Basis Team do an update for  the Business Package of ESS, we hot can have this update. ??
    What is a best practice for solve this issue, having in count the SAP guidelines?
    Thank in advance for your help.
    Best Regards
    Carmen

    Hi,
    I'd strongly agree with Bala.
    The enhancement is relatively simple - I've done the same thing for several systems.
    I have found, however, that the best way to drive the enhancement is by reading the user's security roles. This way access to the area can be granted/removed by the same process that grants access to any/every part of the system.
    - Chris

Maybe you are looking for