Dopo ripristino non vede più partizione windows

Ciao a tutti,
ho un problema, a seguito di un ripristino, (finder non piu funzionante) all'avvio anche tenendo premuto alt non mi vede più la partizione con il S.O. windows.
Ovviamente da mac la vede regolarmente. Cosa posso fare per non dover rieseguire tutta la procedura con boot camp e reinstallare.
Nemmeno da "preferenze di sistema" e "disco avvio" mi vede solo il so mac.
C'è un modo per modificare il boot senza dover rifare tutto (e perdere i dati di conseguenza).
Grazie.

Se scrivi la tua richiesta in italiano, temo che tu abbia poche possibilità che qualcuno ti risponda.
Non è ben chiaro se con
Ovviamente da mac la vede regolarmente
è riferito alla partizione Windows.

Similar Messages

  • Non riesco a stampare, nella partizione Windows dell'IMAC, con la stampante collegata via USB alla Time Capsule. Ho installato Bonjour, vedo la stampante ma non riesco a stampare. Soluzioni?

    Non riesco a stampare, nella partizione Windows dell'IMAC, con la stampante collegata via USB alla Time Capsule. Ho installato Bonjour, vedo la stampante ma non riesco a stampare. Soluzioni?

    Hi @Dige85 ,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Thank you for your understanding
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Ho bisogno di Aiuto. Ho installato OSX Mavericks ma non mi funziona più Windows con bootcamp. Ho fatto il downgrade a snow leopard 10.6.8 ma windows non riparte più. Cosa devo fare ????

    Ho bisogno di Aiuto. Ho installato OSX Mavericks ma non mi funziona più Windows con bootcamp. Ho fatto il downgrade a snow leopard 10.6.8 ma windows non riparte più. Cosa devo fare ????

    Risolto!
    Lanciato installazione di windows 8.1, eliminato completamente tutte le partizioni dal disco secondario e creato nuova partizione, a quel punto mi ha permesso di proseguire e completare l'installazione.

  • How to connect one SAP system to Non-SAP system(Example:Window's7)?

    Hi Experts,
        In general, One SAP system can connect another SAP system through RFC.How to  connect One SAP system  to Non-SAP system(example:window's 7) and is it possible through RFC?
    Thanks and Regards,
    Nageswar

    Hello  Wolfgang Schaper,
    Thank you so much for quick response.
    As you told I am trying to work with BRFplus/DSM to call decision services from nonABAP systems,so I tried with RFC.But it is not possible as you told.
    Please give any solution Without using Web Services, is there any ways to connect from SAP system  with the Non-SAP Systems.

  • Can a Apple Studio Display be used with a none Mac PC under Windows

    Hello, can a 21 Inch Apple Mac Studio Display Monitor (Graphite) be used with a none Mac PC under Windows. Thanks Peter

    what's a "none" Mac PC?
    It can be done, but you'll need to purchase an ADC-DVI adapter in order to connect to the DVI port on the PCs video card.

  • 1and1 Webmail signing out only on this computer, won't sync, blocking non-existant pop-ups & windows

    My webmail is auto signing me out several times a day, but only on this computer. It's set for 'private', I've uninstalled and reinstalled that program, cleared cache and re-started, same thing with Firefox.
    Firefox is also frequently blocking pages from opening that apparently don't exist, and blocking non-existent pop-up windows as well.
    Today I got an error message that my sync password was rejected, which is odd since it's set to manually sync and nothing's been changed. All the resets happened days ago. It also wouldn't let me use my password, but let me change it.
    Since this is the only computer I'm having the problems on I'm assuming that it's either the version of Firefox that I'm using or something in my computer that suddenly isn't playing nice with Firefox, but I don't know where to start, other than once again un and re-installing it (which did nothing).
    Thanks for any help!

    I kept getting that error message. I thought that since I'm syncing with my corporate email so the calendar syns wirelessly with Outlook, that it was causing a conflict.
    I just found this post though, and other people said it worked for them
    http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=0267f2909cea0df9&hl=en
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • IPhoto non vede iPhone

    come da titolo iPhoto non vede iPhone.
    ho tutto aggiornato (iPhoto, iMac ed iPhone, anche iTunes) ma da allora solo iTunes vede iPhone ma iPhoto lo ignora, così come Acquisizione d'immagine!
    non sò più dove sbattere la testa!
    dovendo aggiornare iPhone ho fatto il bakup (su 2 computer diversi) nella speranza poi di recuperare le foto che non sono riuscita a scaricare sul Mac.
    Ma come posso risolvere il problema di iPhoto?!
    grazie

    Do you have photos on the Phone from sources other than your camera? If so try delete them, see if that helps.
    Regards
    TD

  • Problemi sata il bios non vede le unità

    Il bios non vede ne disco rigido ne il lettore cd/dvd , ho cambiato i cavetti sata e niente, ho provato il disco rigido su un altro pc e funziona tramite usb, come devo risolvere questo problema, il pc è del 2009 ed è un peccato, se non risolvo non comprerò più prodotti hp, ho sempre pubblicizzato nel mio lavoro questa marca ma mi rendo conto che ci sono problemi di qualità, mi potete aiutare?

    @nando63 
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    I Work for HP

  • Ipad 2 non funziona dopo ripristino

    Buona sera, ho un ipad 2 con un problema....avevo lo schermo nero, ho fatto il ripristino e adesso non funziona piu'. Quando lo voglio sbloccare lo schermo rimane bianco. Quando e'in carica lampeggia e esce la scritta ciao, per la configurazione del prodotto.
    Grazie

    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • Blackberry desktop software non vede profilo outlook 2013

    BlackBerry Desktop Software, ver. 7.1.0.37 del 13/12/2012 (pacchetto 39)
    BalckBerry Torch 9860, ver. soft. 7.1 pacchetto 2061
    Outlook 2013 di Office Home and Business 2013 64 bit (installato da aggiornamento Office 2010 64 bit)
    Windows 8 64 bit
    Premetto che fino a ieri, prima dell'aggiornamento da Office 2010 a Office 2013, tutto andava regolarmente.
    Con l'aggiornamento il Desktop Software di Rim non riconosce più Outlook 2013 come programma di posta predefinito (nonostante che sia come tale impostato sia in Outlook che in pannello di controllo di Windows).
    Nel tentativo di impostazioni della sincronizzazione non consente di selezionare il Profilo Outlook in quanto mostra la lista profili come vuota.
    Il profilo di Outlook è unico "Outlook", e presente nella visualizzazione in pannello di controllo per le impostazioni Outlook.
    Si è già tentato il "ripara" della installazione di Office, con "cambia" dall'Installa (come anche citato su altre discussioni in merito a errori simili però con altre versioni di abbinamento)
    Si è già disinstallato e ri installato Desktop Software di Rim.
    Come dichiarazione esplicita la versione di dicembre 7.1 di desktop cita fino alla versione Outlook 2010, davo però scontato che trattandosi di una interoperabilità su aspetti che pensavo standardizzati fosse trasparente.
    Altro messaggio di errore riconduceva alla mancata attivazione di "Redemption".
    Dopo alcune ricerche sembrerebbe più un problema di Desktop che di sistema Office.
    Vi è qualche modo, anche operando sul registro di sistema, di riallineare il tutto ?
    Si sa se verrà in futuro mantenuto il supporto di sincronizzazione con Outlook sia in BlackBerry Desktop Software che in BlackBerry Link ?
    Grazie
    Saluti
    Roberto Pierini

    Hi and Welcome to the Community!
    Interesting...I actually cannot determine at all why it ever worked for you...the Desktop Software is not compatible with Outlook 2013...refer:
    KB12268 Synchronization support for BlackBerry Desktop Software for Windows
    Unless it's Outlook that got upgraded? You were not clear about exactly what was upgraded...but, if it was Outlook, then that would indeed explain it...the upgrade took you to a version of Outlook that is not supported.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Da qualche giorno il mio pc e di conseguenza Itunes non vede più l'ipod touch per cui non posso più trasferire le immagini. Cosa posso fare ho già eseguito tutte le procedure di supporto

    Ho un pc windows con Vista. Ho istallato itunes e per molti mesi tutto ha funzionato perfettamente. Da qualche giorno però mentre l'Iphon e l?ipad sono riconosciuti regolarmente da itunes. non si vede più lipod touch.
    Nelle risorse del computer non si vedono più ne iphone, ne ipad, ne ipod però.
    Vorrei scaricare sul pc le foto e i video dall'ipod, come faccio?

    Ho un pc windows con Vista. Ho istallato itunes e per molti mesi tutto ha funzionato perfettamente. Da qualche giorno però mentre l'Iphon e l?ipad sono riconosciuti regolarmente da itunes. non si vede più lipod touch.
    Nelle risorse del computer non si vedono più ne iphone, ne ipad, ne ipod però.
    Vorrei scaricare sul pc le foto e i video dall'ipod, come faccio?

  • Problema Apple ID diversi dopo ripristino backup

    Buonasera a tutti,
    a mia madre è stato sostituito un iPhone difettoso. Prima di sostituirlo ho effettuato un backup su iTunes.
    Dopo aver ripristinato il backup, nelle impostazioni di iCloud e iTunes Store e App Store risulta correttamente l'Apple ID di mia madre, mentre quando acquisto un'App o la aggiorno richiede la password del mio Apple ID e non quello di mia madre!
    Ho provato anche ad uscire dal mio account in iTunes ed entrare in quello di mia madre e solo dopo ho effettuato il ripristino del backup, ma non ho risolto il problema.
    Qualcuno può aiutarmi?
    Grazie

    Qui trovi più notizie.
    https://discussions.apple.com/thread/4381467?tstart=0
    è in inglese. Dimmi se ti serve altro.

  • "Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

    We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German). 
    Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
    "There was an error during installation"
    From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
    Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
    Exception: ....
    System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
    ---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
    The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
    The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
    doesn't exist, because Windows is English.
    Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
    Thank you for your help

    Hello,
    1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
    2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
    onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
    To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Issue with applying plugin in non-English version of AE on non-English version of Windows

    Hi There,
    I am encountering an issue related to my plugin and differing language versions of AE.  When I apply my plugin to a layer within a project opened in an English version of AE, everything behaves as expected.  However, when I apply the same plugin, in the same manner, on a non-English version of AE, I get an error message.  I am dealing with this debug process on Windows 8 in Spanish.  Here is the error I am receiving from the the Spanish version of CS6 on Windows8 (Spanish):
    "After Effects error: no se pudo cargar el plugin "Debug.aex" (126).
    ( 48 :: 46 )
    That basically says that the plugin could not be applied.  Is there any reason why I might get this error in the Spanish version and not receive it in the English version?  Do I need to setup VS2012 to build in release mode for it to work?  Am I missing something?
    Thanks,
    Arie

    I did find this in the documentation, but am not sure if this is relevant.
    LOCALIZATION
    Thanks to the Unicode support added in CS4, localization is much less painful. For non- Unicode strings, such as in older function suites, we expect strings to be multi-byte encoded using the application's current locale. On Windows, you can use the WideCharToMultiByte() function, specifying CP_OEMCP as the first argument. On Mac OS, use the encoding returned by GetApplicationTextEncoding().
    I do not care if the actual strings are in english even though the plugin is loaded in a non-English install of AE.  Do I still need to do what this part of the documentation is specifying?  Can anybody show me some examples of localization for plugins?
    Thanks,
    Arie

  • Where can I get help with partitioning my hard drive? I have a "non-genuine" version of windows that I need to replace but I have not a clue how to go about doing that.

    I love my mac, but I unfortunately have to also run windows because of engineering software. I bought windows 7 at my campus computre store and one year later my computer is telling me that my software is "non-genuine." I need to fix this asap, but my computer store refuses to do anything because a year has passed. Microsoft wont help because I have a Mac.
    My question is, where can I go to find someone who can help me uninstall the "non-genuine" windows 7 and replace it with a functional one?
    Im allowed a free download of windows 7 because I'm still a student, but I have no clue how to go about uninstalling and reinstalling windows.
    Thanks a bunch.

    Hello,
    This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
    Non-Genuine Windows means that it can't authenticate your copy of Windows.
    It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
    Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
    The Start Menu will show 'CMD.exe', 
    Right-click the CMD.exe file and select Run As Administrator.
    In the CMD window, type: slmgr.vbs -ipk <type your product key here>
    To activate windows after changing the key, type: slmgr.vbs -ato
    It should now accept the new key code and you will need to be connected to the Internet to authenticate.
    If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
    Then create a new setup with your new Windows 7 disk.
    For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
    Best of luck

Maybe you are looking for