Doppelte AcrRd.ex *32 Anzeige im Taskmanager

Warum wird unter Windows 7 / 8 im Taskmanager nach dem Start des Adobe Readers AcroRd.ex *32 doppelt angezeigt. Unter Windows XP war die Anzeige nur einfach. Es geht um kein Ressourcenproblem sondern nur um eine Erklärung. Mit dem Beenden des Readers (egal ob einfach oder mehrfach aufgerufen) werden beide Tasks wieder geschlossen. Wenn man einen Task über den Taskmanager beendet, werden auch beide und somit das Programm geschlossen. Offensichtlich haben beide auch eine differente Speicherauslastung.
Genutzt wird die aktuelle Reader-Version. Hinweis: Parallel ist auch Acrobat installiert.

Why appears in Windows 7/8 Task Manager after the start of the Adobe Reader AcroRd.ex *32 twice. In Windows XP, it displayes only once. It involves no resource problem but merely a statement. With the end of the reader (whether called one or more times) will be closed both tasks again. When you finish a task from the task manager, and thus both the program will be closed. Obviously, both have a differente memory usage.
Used the current version of Reader. Note: Parallel and Acrobat installed.
Addendum: I've found that AcroRd.ex * 32 even once (larger memory capacity) and will probably once called the Explorer (maybe is it connected with the taskbar in Win 7?).

Similar Messages

Memory_target and memory usage reported by windows taskmanager

Hi,
shouldn't Oracle 11g limit the amount of used memory (reported by windows taskmanager for process oracle.exe) to the value of "memory_target" (which means using automatic memory management)? My database running on Windows 2003 R2 32bit (RAC) is constantly consuming more and more memory (limited to 500MB, currently using 741MB), until it reaches the limit of 1.7GB, which one process can use. After this the database fails.
The database is hosting three very simple applications, no challenge for Oracle. :-)
Thanks in advance,
Frank

short update: both database instances are configured for 500MB "memory_target" and currently one database is using 877MB virtual memory and the other one 784MB of virtual memory (according to windows taskmanager, process oracle.exe). One of these instances is a recovery catalog, doing nothing at all (at the moment).
I'm really worried where all the memory is going to!

Firefox will not close any way I try... I have to open taskmanager and end prog... any idea how to fix this or what could cause this issue?

I am using version 3.0.19 and have been for some time. This problem has just occured in the last couple of weeks and I can't figure it out. I have updated my addons, scanned for malware, etc etc but no luck. If I have 2 windows open at the same time it will close one but refuses to aknowledge any request to close the final window open... and yes this happens when I only have had one open. It's driving me crazy as it's soooo annoying to have to open taskmanager everytime I want to shut it down. Any help would be REALLY appreciated as I can't be the only one who has had this problem.... but please don't suggest I update to the newer version until I have this issue fixed as it will not let me simply update and I will have to overwrite my whole setup (which I'm not ready to part with yet)
THANK YOU in advance for ANY suggestions!
elc

Hi Tulips 14,
If you are having reoccuring Error 21 notices when trying to restore your iPhone, you may find the following article helpful, in particular the "Check for Hardware Issues" portion:
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden

Firefox.exe*32 not closing down when i sutdown all open windows so I have to close it through taskmanager

firefox.exe*32 not closing down when i sutdown all open windows so I have to close it through taskmanager so I can then start a new session.

See:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

Problem in invoking TaskMAnager from another BPEL process

Hi,
I have created a BPEL process having its own xsd schema file and i have also imported Task.xsd.In this process i want to invoke TaskManager Service in java Embed activity(bpel:exec language="java") in following manner:
/////////////////////////////////////////////////CODE////////////////////////////////////////////////
Task task = TaskFactory.createFacade(new QName("http://services.oracle.com/bpel/task", "task"));
task.setTitle("Task Title");
task.setCreator("ProcessManager...");
task.setAssignee("assignee");
task.setPriority(3);
NormalizedMessage nm = new NormalizedMessage();
nm.addPart("payload",task.getRootElement());
Locator locator = new Locator("default","bpel");
IDeliveryService deliveryService = (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
deliveryService.post("TaskManager", "initiateTask", nm );
////////////////////////////////////CODE////////////////////////////////////////////////////////
It creates the instance of taskmanager but following error occur in its initiate task.
//////////////////////////////////ERROR/////////////////////////////////////////////////////////////
<IntiateFault xmlns="http://services.oracle.com/bpel/task">
<part name="summary">
<summary>Cannot update task. The process domain was unable to insert the data for task "LocalGUID:c568752ccc493590:148662:1089e600035:-7fd4" in the datasource. The exception reported is: [POL-5134] invalid host variable type Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid. sql statement: INSERT INTO task( domain_ref, conversation_id, title, creation_date, creator, modify_date, modifier, assignee, status, expired, exp_date, priority, template, custom_key, conclusion ) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? )</summary>
</part>
</IntiateFault>
//////////////////////////////////ERROR/////////////////////////////////////////////////////////////
Thanks
Nancy

By default the BPEL 10.1.2, it will do a local call to the process. It will not execute a SOAP request, no network access is done.
It can be configured at domain level:
Parameter: optSoapShortcut (SOAP local optimization)
Turns on "short-cut" for local SOAP request; local SOAP calls are normally done via an internal call instead of sending a message through the SOAP stack.
The default behavior for the engine is to optimize all. To disable optimization specify a value other than "true" or "yes".

Problem in TaskManager.save()

Hi,
I have written a code for process kickoff.
It successfully kickoff the process and created the process id and task id.
Then, I have retrieved the task id and called TaskManager.save(created_task_id, FormInstance obj);
But, it throws the following exception:
com.adobe.idp.taskmanager.dsc.client.task.TaskNotFoundException: no task found for task ID = 208
at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.saveInternal(TaskManagerServ iceImpl.java:4481)
at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.saveFormData(TaskManagerServ iceImpl.java:474)
My Code:
Properties connectionProps = new Properties();
connectionProps.setProperty("DSC_DEFAULT_EJB_ENDPOINT", "jnp://localhost:1099");
connectionProps.setProperty("DSC_TRANSPORT_PROTOCOL","EJB");
connectionProps.setProperty("DSC_SERVER_TYPE", "JBoss");
connectionProps.setProperty("DSC_CREDENTIAL_USERNAME", "administrator");
connectionProps.setProperty("DSC_CREDENTIAL_PASSWORD", "password");
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
TaskManager task = TaskManagerClientFactory.getTaskManager(myFactory);
URL url = new java.net.URL("xdp path");
Document doc = new Document(url);
InputStream in = doc.getInputStream();
byte[] formarray = new byte[in.available()];
in.read(formarray);
FormInstance form = task.getEmptyForm();
form.setTemplatePath("xdppath");
form.setXFAData(formarray);
form.setDocument(doc);
SaveTaskResult result = task.save(taskID, form);
System.out.println("ActionFromData="+result.getActionFromData());
System.out.println("task id="+result.getTaskId());
Please provide the solution.
Thanks in advance.
Regards,
Saravanan

You must have the wrong task ID. I tried running the code and it works - here is the code that i used:
try{
//Set connection properties
Properties ConnectionProps = new Properties();
ConnectionProps.setProperty("DSC_DEFAULT_EJB_ENDPOINT", "jnp://localhost:1099");
ConnectionProps.setProperty("DSC_TRANSPORT_PROTOCOL","EJB");
ConnectionProps.setProperty("DSC_SERVER_TYPE", "JBoss");
ConnectionProps.setProperty("DSC_CREDENTIAL_USERNAME", "tblue");
ConnectionProps.setProperty("DSC_CREDENTIAL_PASSWORD", "password");
//Create a ServiceClientFactory object
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(ConnectionProps);
//Create a TaskManager object
TaskManager myTaskManager = TaskManagerClientFactory.getTaskManager(myFactory);
//Get the XFA data to merge into the form
FileInputStream myData = new FileInputStream("C:\\Adobe\\FormData.xml");
Document doc = new Document(myData);
InputStream in = doc.getInputStream();
byte[] formarray = new byte[in.available()];
in.read(formarray);
//Retrieve the form instance associated with task 2
FormInstance newForm = myTaskManager.getEmptyForm();
newForm.setTemplatePath("C:\\Adobe\\Mortgage.xdp");
newForm.setXFAData(formarray);
newForm.setDocument(doc);
SaveTaskResult result = myTaskManager.save(2, newForm);
System.out.println("ActionFromData= "+result.getActionFromData());
System.out.println("task id= "+result.getTaskId());
catch(Exception e)
e.printStackTrace();

Premiere Pro CS5.5 closes, but process in taskmanager doesn't

Windows 7, CS5.5.2
I had this happening to me a few times times, I click the x in the top right corner to close Premiere, it asks me to save my project, I click no and the program seems to close, nothing on the taskbar left either, but it's still there in the taskmanager as a 290MB process.
I discovered this when Premiere refused to start. Now I'm forced to close the process before I can start Premiere.
What's causing this?
It seems that more people had this problem:
http://forums.adobe.com/message/2920945
http://forums.adobe.com/message/3248472
Some had it solved by updating the video driver, but since I already have the latest one (NVidia) I don't see how that's going to solve it. I also have the latest chipset and audio dirvers as of yesterday.

In one case I waited almost 15 min.
While I was away I have done some rigorous testing with Microsoft's driver verifier tool, the same tool they use to certify drivers. I have found two issues that I solved by removing two conflicting programs. The last diagnostics run of driver verifier was 100% successful. I also did a rigorous memory test and that didn't show any problems either. As a matter of fact I'm been amazed how stable my system is running for almost 2 years now and trust me, I stress it a lot by running applications like Photoshop, Illustrator, Cinema 4D, games and even Vmware. It's also not a system that is cluttered with all kind of junk, since I restore an image of the system partition every 3 months or so. The backup only contains the complete installation of my OS and software BEFORE use. A restore of this image before I posted my problem in this forum also didn't solve the issue
Anyway, after using driver verifier, I tried Premiere Pro again, closed it 3 times after fiddling with some videos and now after the 4th time I close the program I have the same issue as before: the program seems to close, the taskbar is empty, but again the task manager is showing the adobe premiere pro.exe process. That process is now still visible in task manager after about 10 minutes.
The only thing I could try now is cancelling all non-Microsoft processes and services and see if the problem still returns. I'm open for any other suggestions.
Mind you, I could solve this issue by writing a script that kills the process after I leave the program, but:
a - I don't know if it will do any harm (maybe the process is still saving or updating files)
b - It just camouflages the issue and I never feel good about that
EDIT: I closed all non-Windows processes (as an IT professional I know what I'm looking at), stopped all non-Windows processes and killed the adobe premiere pro.exe process that was still running, I started Premiere Pro fiddled with some videos, closed the program and again....the adobe premiere pro.exe process continues to run....for several minutes now.
To sum it up: I have the latest bios and drivers for graphics card, audio and chipset. I ran Microsoft driver verifier and managed to run a full final diagnostics without any conflicts, I ran a memory test that didn't show any error, I restored a clean backup of my system partition, I have all the latest updates for both Windows and Adobe software, I even tried running Premiere Pro without running all non- Windows processes and services and the Premiere Pro process still doesn't want to close. I don't run any brand new model video card either, I'm using a 9800GT that has very mature drivers and the card itself was bought brand new only 6 months ago and has not crashed any game so far ( the best test for any video card) or any application that makes use of GPU acceleration, like Photoshop for example, which always runs at OpenGL/normal.

Firefox 9 beta messed up my Internet connections, Can't be killed in Taskmanager, can't be uninstalled

I installed the Firefox 9 beta and it messed up my Internet settings so no browsers could connect to the Internet. However, my antivirus program can connect to do updates, and I could still use my FTP functions as well. I am using Windows XP SP3 32 bit, with Gigabyte motherboard with built in Ethernet connection connected to RCA cable modem. As well, if I run Firefox, I can't kill the process in Taskmanager. I cannot uninstall Firefox (the uninstaller just freezes and RevoUninstaller can't remove it either. This is the most trouble I had with any software installation in many years.

Read the replies to this thread - especially the link to another thread in reply #5.
http://forums.sun.com/thread.jspa?threadID=5356970

Can't receive any results from TaskManager

I can't receive message from TaskManager when initiate new task. There is always time out.
From BPEL Console I've got only this message:
"Your test request generated the following exception/fault:
java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:".
When BPEL is instaled with developer option I've got this message in BPEL PM Server console:
"<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is d7ae7ea9bf56ebdc:90c06f:1045b6a0db0:-7fe5. Please check the process instance for detail.".
I've tested with this versions:
- BPEL PM 10.1.2 Beta 3
- BPEL PM 10.1.2 Release GA (with patch)
What's wrong?
Any suggestions?

Try increasing the value of "syncMaxWaitTime" under Manage Bpel domain and timeout in server.xml (for oc4j --> \orabpel\system\appserver\oc4j\j2ee\home\config)

Wont close properly after using google & wont open again without using taskmanager

after the last firefox update if I use google a few times firefox doesnt close properly & wont restart unless I either reboot the machine or go into taskmanager & close it down there. It then re-opens correctly but with the last google pages displayed (even if they've been closed down before I attempted to close firefox)
I'm not the only person with this problem I know of at least one other.

I have the same problem. If I open a google site, the browser no longer responds and the process must be stopped in task manager.
This problem occurs on all google websites. For example mail.google.com, google.com and reader.google.ch.
OS: Windows 7 // Firefox: Firefox 4.0 Beta 7 and 8 // Language: German

How do I enable regedit and taskmanager

I downloaded a file and found out it was infected i deleted it as soon as possible. Later on i found out it had disabled my taskmanager my regedit and who knows what else.Can I get your support on how to fix this. Ive already tried Start>RUN>gpedit.msc
But it says it cannot be found. I tried another method with notepad and the .run thing it also didn't work. I ran my antivirus program and it says all is well.Can someone please help me?

See this article for information on transferring notes to your iPod and here for contacts. The iPod's note reader will only properly display plain text files and interpret a few HTML tags, and will only display the first 4000 characters of a longer note.
(18357)

ITunes outlook add-in let outlook in taskmanager

When I close outlook, the outlook-process is still in the taskmanager. When i disable the itunes outlook-add-in, outlook will close correctly. Where is the problemm with the outlook-add-in or what have i to change that outlook will close complte. I'm using outlook 2003, windows 7 and iTunes 9.1.0.79.
Michael

Thank you so much for your response. I will go through the instructions in the article. As a followup, however, I am using the most current version of itunes, so I don't know why I can't see the newest addin (outlookitunessync... or whatever it is). I uninstalled itunes and quicktime and reinstalled, but it didn't appear in my Trust Center. I followed the directions at the top of the discussion forum for problems with outlook, uninstalled itunes, apple mobile support, and apple updater, deleted my itunes folder and emptied the trash, rebooted, downloaded a fresh itunes from top to bottom. I still don't see the sync addin. I'm interested in the article you sent because I do have some blocked startup programs. Always do, and just ignore them. So, maybe tomorrow I'll use the info you sent me and give that a try.
I really appreciate you taking the time to help! I'll followup with the result afterwards.

Anzeige der Videokompression im Projektfenster PP CC

Hallo!
Mein Anliegen betrifft, wie im Titel bereits angegeben, die Anzeige der Videokompression bzw. der Codecs von den importierten Clips im Projektfenster.
Standardmäßig ist die Kompressorspalte nicht angezeigt. Diese habe ich nachträglich hinzugefügt unter ->Metadatenanzeige...->Dynamische Medien->Videokompressor
Diese Spalte bleibt jedoch bei all meinen importierten Clips leer.
Auch, wenn ich per Rechtsklick auf den Clip und dort das Eigenschaften-Fenster öffne, ist die Zeile hinter Videokompression leer.
Habe mal einen Screenshot angehängt, der das Problem aufzeigt.
Eigentlich müsste hinter "Videokompression =" Apple ProRes 422 (HQ) stehen.
(Auch bei anders codierten Clips werden keine Kompressionsinfos angezeigt)
Es herrscht kein Wiedergabeproblem, noch sonstwas.
Nur die, für mich, sehr wichtige Kompressionsanzeige fehlt.
Vor allem, wenn ich an einem Projekt arbeite, bei dem ich Material von unterschiedlichen Quellen habe, würde ich im Projektfenster gerne schnell einen Überblick, vor allem, über die Videokompression der Clips haben.
Habe ich etwas übersehen?
Über eine hilfreiche Antwort würde ich mich sehr freuen!
Danke
und viele Grüße
Louis
Hier der Screenshot:

So,
ich habe jetztz selbst eine Methode gefunden, mit der es realtiv unumständlich geht. Zwar gibt es leider keine magische "Füge zugehöriges Audio zu diesem Clip" Funktion, aber mit der Funktion "frame angleichen" geht das doch ganz gut.
Einfach mit dem Scrubber/Positionszeiger/Abspielkopf auf der Timeline über den entsprechenden Clip gehen, Sequenz>frame angleichen (kann auch als Tastaturbefehl eingespeichert werden und ist Standardmäßig auf "f"). Nun sucht Premiere den entsprechenden Clip aus dem Projekt heraus und legt ihn mit allen Inhalten (Audio und Video) und den entsprechenden In und Outs in das Quellfenster. Jetzt einfach die Audioinformation schnappen und unter den entsprechenden Clip legen. Fertig.
Das geht leider nicht, mit mehreren Clips und ist auch nicht das, was ich erhofft habe zu finden - aber wesentlich besser als alles per Hand erneut zu suchen.
Vielleicht wäre es eine Idee für das nächste Update, "automatisches hinzufügen von audio zum clip" ... Support?

Anzeige von JPG-Dateien

Hallo
Auf einigen PCs arbeiten wir noch mit Illustrator 10. Dabei generieren wir auch JPG-Dateien, um sie in Dokumente einzufügen. Neuerdings zeigt MS Windows XP diese Grafiken als leer . Was läuft da falsch?
Diese Anzeige als leere JPG-Dateien behindert uns bei der Suche, z.B. mit Google Picasa. Dabei arbeiten wir bei diesen Produkten mit den neusten Versionen.
- MS Windows XP
- Google Picasa
Dieselben Grafiken eingefügt in ein Word-Dokumente erscheinen einwandfrei.
Zur Illustration füge ich eine dieser JPG-Dateien im Anhang bei.
Danke für jeden sachdienlichen Hinweis.
Gruss aus der Schweiz

Perhaps he has a embedded cmyk profile and the color management policy is to honor that embedded profile he can change that in the Edit>Color settings.
As well as changing the document color space to RGB.
This translated by Babel Fish
Möglicherweise hat er ein eingebettetes cmyk Profil und die FarbenPolitik der Unternehmensleitung ist, dieses eingebettete Profil zu ehren, das er den in den redigieren/Farbeneinstellungen ändern kann.
Sowie das Ändern der DokumentenFarbkraft zu RGB.

Acrobat XI erzeugt bei der Anzeige von Portfolios eine Fehlermeldun

Guten Tag zusammen,
Acrobat Pro XI ist installiert und funktioniert grundsätzlich. Wenn ich aber ein Portfolio erstelle (z.B. in Outlook alle Inhalte eines Ordner zu einer pdf-Datei zusammenfügen), dann erscheint anschließend eine Fehlermeldung. Ich soll die aktuelle FlashPlayer Version istallieren - habe ich aber siehe
Kann mir jemand verraten, wie ich diese Meldung weg bekomme - und vielleicht auch wieder eine korrekte Anzeige des Portfolios....
Danke!!!!

I am not quite sure what the question is since the translator does not work on your message (indicates it is already in English). I would start with Acrobat and use Help>Repair. Then do Help>Updates. It may be the updates are necessary for Office 2010, I don't remember for sure. I think the updates may be required if you are using a 64-bit OFFICE.

Doppelte AcrRd.ex *32 Anzeige im Taskmanager

Similar Messages

Maybe you are looking for