Dos Driver for ni pci-485 interface card

Can any one give details about availablity of Dos driver for NI PCI-485 Interface Card.
Thanks

The PCI-485 uses standard 16550 UARTs, and while there isn't a packaged DOS driver avilable, you should be able to use the card in DOS applications by configuring the software to use the base address assigned to the UART that you wish to use. One important note is the RS-485 wire modes which are configured via the scratch register. The user manual documents how this is performed.

Similar Messages

  • PCI Video Interface Card for Mac Pro/FCP

    Could someone please recommend a PCI Video Interface card for my Mac Pro? I'm looking for something that will capture in Beta SP, as well as support HD-SDI (bnc connector) -- does such a card exist?
    Thanks!
    Message was edited by: Matinicus Rock

    Matrox:
    http://www.matrox.com/video/en/products/mac/mxo2_family/
    You are flush with options...
    Shane

  • I need a windows 7 driver for the PCI 8335

    I bought a PXI system years ago, controlled by a very old computer via a fiber optic link with a pci card.  I want to use updated computers, and bought a PCI extension that I can use with laptops, but I cannot find the driver for the PCI card on the NI website.  If anyone knows where it might be lcated please let me know.

    I managed to find this KB on MXI-4, but the results might be the same for MXI-3.
    http://digital.ni.com/public.nsf/allkb/6E8F66D201130C5A862575CF004D10DF
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions

  • Where to down load Software or driver for NI PCI-8430/16 (RS232)

    where to down load Software or driver for NI PCI-8430/16 (RS232)

    Try here:NI-Serial 4.0
    I just did a search from ni.com for "ni-serial download" and that was the first link.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Driver for CT4660 digital I/O card - with Soundblaster Live SB0

    Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
    Thanks and happy New Year.
    Mike

    ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
    http://digital.ni.com/softlib.nsf/current

  • Where can i get a unix driver for a Trident VGA9000 video card online?

    where can i get a unix driver for a Trident VGA9000 video card online?

    http://www.driverguide.com/archives/archive5/905.html

  • JMicron JMB361 IDE CD-ROM DOS Driver (for floppy disk) released!

    For all of you that need CD ROM support in DOS, MSI released DOS driver for Jmicron JMB361.  http://us2.msi.com.tw/support/dvr_exe/mbd_dvr/Jmicron_Xcdrom_MB.zip
    Cheers! 

    Anyone tried this yet?
    How well does this driver works?
    Need some feedbacks on it.

  • Need driver for on-board ethernet interface

    I am seaching on an ethernet nic driver for Solaris 8 x86
    O/S is Solaris 8 4/01 x86
    HW is Toshiba Laptop A15-S127
    prtconf -pv reports the following:
    VendorID --- 0x8086, DeviceID -- 0x103d
    model: 'PCI: 1179,1 class: Ethernet controller'
    name: 'pci1179,1'
    Can anyone tell me who makes this controller from the ID numbers??
    Thanks,
    Tom

    That's an "Intel PRO/100 VE" NIC. It should work without problems using the standard Solaris "iprb" driver.
    You have to add a new driver binding to /etc/driver_aliases, so that the Solaris kernel will try use the "iprb"
    driver with that Intel PCI/100 VE PCI NIC hardware. Add the following line to /etc/driver_aliases:
    iprb "pci8086,103d"
    Then reboot with the "-r" option (or reboot and run "devfsadm -v"). Now it should be possible to plumb and
    configure the iprb0 interface:
    ifconfig iprb0 plumb
    ifconfig iprb0 inet 1.2.3.4 up
    etc...

  • Lookout driver for NI PCI Timer/Counter Board NI-6601

    Is there any Lookout version 5.0 driver available for the NI-6601 PCI Card? Any built in drive that works?

    There is a PCI card available that works with DAQ OPC, in this case the E-series product line would apply. Many of the PCI-6040E type cards have counters. However, at this stage of development I would recommend for serious consideration using LabVIEW and NI-DAQ. Lookout is a great program for communicating with OPC items. However, for basic to advanced data acquisition, LabVIEW is the optimized solution. All other ways will require more development time.
    Regards,
    Robert Jackson
    Application Engineer

  • Is there a driver for NI Digital I/O cards for Venturcom RTX without LabView?

    I'm looking for Digital I/O cards (PCI) for use with Venturcom RTX app (without LabView) and, since LabView RTX is based on Venturcom's RTX, I was hoping that NI might provide RTX drivers for their cards.

    Dear Martin,
    I have looked for information for PCI DIO drivers for use with the Venturcom RTX application without LabVIEW, unfortunately NI does not produce any RTX drivers for NI cards.
    I would advise you to use register level programming, below is a link (even though it is for a PCI 6036):
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000000A320000&ECategory=Measurement+Hardware.Real-Time
    Unfortunatley this is limited information.
    Kind Regards
    Louis Price
    Applications Engineer
    |National Instruments

  • DOS driver for XA52P (SATA DVD drive)

    Hi,
    Is it possible to get this drive to work with MSCDEX in DOS?
    Which port address and interrupt does SATA use?
    -Leif

    Hi Geographygeek,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post regarding the problem finding the driver for you DVD drive. If you can provide your product number for your Compaq Presario I will see what I can find for you.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • FOR SALE: PCI-6024E DAQ Card

    Hello everyone,
    I have a PCI-6024E DAQ card for sale.
    I am sorry if this is off topic - if someone knows what forum to sell NI hardware please let me know.
    If you want more information, please contact me - I have the following items, selling as a set:
    * PCI-6024E Multi I/O and PCI DAQ card, low-Cost E Series Multifunction DAQ, 12-Bit, 200 kS/s, 16 Analog Inputs ($595/list)
    * CB-68LPR (184700B) connector block ($95/list)
    * 182482A-01 type R6868 1meter cable ($40/list)
    Thanks,
    Dave M
    [email protected]

    I'm sorry, I should have put in the post that I will entertain offers. Please make an offer.
    Regards,
    Dave M.
    "DaveM" wrote in message news:RJErb.7470$[email protected]..
    > Hello everyone,
    >
    > I have a PCI-6024E DAQ card for sale.
    >
    > I am sorry if this is off topic - if someone knows what forum to sell NI hardware please let me know.
    >
    > If you want more information, please contact me - I have the following items, selling as a set:
    >
    > * PCI-6024E Multi I/O and PCI DAQ card, low-Cost E Series Multifunction DAQ, 12-Bit, 200 kS/s, 16 Analog Inputs ($595/list)
    >
    > * CB-68LPR (184700B) connector block ($95/list)
    >
    > * 182482A-01 type R6868 1meter cable ($40/list)
    >
    > Thanks,
    >
    > Dave M
    > [email protected]

  • Satellite A60: I need WinXP driver for the PCI Flash Memory device

    Hi
    I have re installed windows XP on my Satellite A-60 SA63A-002001 and have a problem trying to find out what drivers I need for the PCI Flash Memory hardware which I don't know what the name of the device is.
    Can someone PLEASE help me!!
    Cheers
    Grant

    Hi
    I dont know which exactly notebook you has because there are many Satellite A60-xxx but I assume most of them have the same hardware configuration.
    The fact is that the on this unit the Compact Flash card slot, smard card reader, SD-card slot are not available. You can use only a PCMCIA cards.

  • Driver for PCMCIA-CAN series 2 card needed

    Looking for the driver for the PCMCIA-CAN series 2 card.......
    Solved!
    Go to Solution.

    Not sure what version is needed, but this may get you started:
    http://search.ni.com/nisearch/app/main/p/ap/tech/pg/1/sn/ssnav:sup,catnav:du,n13:hardwareDriver,n8:2...
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Cant install a NIVIDA driver for my NIVIDA GeForce GS Card

    I was told in a seperate discussion that I could use the Windows 8 driver for this Windows 10 Technical preview.
    I am running a 32 Bit copy of the preview.as this processor will not run 64 bit programs.
    I have down loaded the Windows 8 32 bit copy of the NIVIDA 7300 GS driver.
    I ran the install and but it said it installed but had a "!" by it in the Device Manager!
    I have tried to run the install and it shows up as the Video driver in the Device manager but it states the following under the driver:
    "Windows has stopped this device because it has reported problems. (Code 43)"
    Can someone help me with a driver.
    Not sure how to get the NIVIDA board running at over 600x800.  So if anyone has any input please let me know, running at 600x800 is a bummer.

    WA8FRD
    Did you install the win 8 driver in compatibility mode?
    To install in compatibility mode do the following:
    Right click the installer>properties>compatibility>choose OS
    http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
    (works in vista, win 7, win 8, and win 10)
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for

  • How to read and display a signal from my PIC Microcontr​oller onto Labview?

    Hi, I am doing a project on a Pulse Oximeter and i am trying to read and display the signal from my PIC Microcontroller on Labview? How do i go about doing it? I am using the PIC16F877 and also making use of the USART? How do i implement and initiali

  • CIN : decimal problem in export excise invoice

    Hi all, I have issue, we are in export sales and we activated 5 decimal option for our customer. issue is  we made a export billing document with ref that export excise invoice. - in my billing doc ED exchange rate is 47.4  and the unit price is 1.63

  • Fill internal table with mutliple entries for nested structure

    Dear ABAP Experts, I have a question related to fill internal tables with nested structures. I have a structure like this: BEGIN OF proto,           sicht TYPE ysicht,           version TYPE FAGLFLEXA-RVERS,           BEGIN OF kons, kon TYPE YKONSEIN

  • F4 help for Selection fields in Infopackage not available

    Hello Friends, I have created a datasource in Bi7.0 .while creating this i have put selection option X(selection possible) and Selection option 3(EQ & BT) for the three characteristics in the datasource and activated it. When i am creating the Infopa

  • How to create a full-page collage?

    Am trying to find an easy way to create a full-page collage of pictures (to then save as a single photo, JPEG or PDF). Is there an easy way to do this within iPhoto '08 or a standard Mac application? (In the Cards/Calendars/Prints option of even orde