Dosbox ZMBV codec in Premiere Pro CS5.5?

I have captured a few vids under dosbox and I believe they were encoded as ZMBV. Despite that I've installed the codec by clicking "install codec" under doxbox menu, CS Premiere pro 5.5 can't recognize these vids and treated them as audio files. My operating system is windows 7 x64.
Thank you.

Using VLC Player
http://www.videolan.org/vlc/
I was able to convert it to an h.264 + AAC (MP4) and it played fine in Premiere.
Make sure to type the .mp4 for the Destination file name.
There seems to be missing audio from the sample you have. I could only hear a few effects.
GLenn

Similar Messages

Codec Problem Premiere Pro CS5

Hallo,
ich würde gerne ein Video mit Premiere Pro schneiden. Allerdings kommt beim Importieren die Fehlermeldung, dass der Codec fehlt oder nicht verfügbar ist. VLC spielt das Video aber ohne Probleme ab und gibt als Infos an:
Codec: Mpeg-1/2 Video (mpgv)
Auflösung: 1440x1080
Bildwiederholrate: 25
Der Container ist MOV.
Kann man da irgendwas machen um das Video zu schneiden? Es wundert mich ein wenig, weil ich schon HD MOV Videos ohne Probleme mit Premiere geschnitten habe.
Schonmal Danke für eure Antworten. Viele Grüße
Foma

Na wenn er das ganze auf dem Mac gemacht hat, dann ist die Datei auch nur dort verwendbar. Das ist ein uraltes bekanntes Problem, weil Apple sich eien eigene Version des HDV CoDecs gestrickt hat. In dem Fall wäre es sinnvoller, sich die Kamer nochmal zu borgen unds selber in Premiere alles nochmal zu capturen...
Mylenium

Premiere Pro CS5 codec problem

Hey all. Here's the problem. At work I use Premiere CS3 on an old Edius box that has Canopus codecs. When I archive a final copy, I use a DVCPRO HD codec, specifically the Canopus SD50/DVHD codec, to an AVI file.
At home I have a new copy of CS5 on a new machine. I brought home some of these AVI files from work that used the Canopus SD50/DVHD codec. I could not open them up at home on anything. I went and found the codec and installed it. Now I can open the files with Media Player no problem, but I cannot import them into Premiere, Adobe Media Encoder, or After Effects. The result is audio and not video.
Any suggestions that don't include re-exporting everything using a different codec?
Thanks!

Any suggestions that don't include re-exporting everything using a different codec?
Unless there is a 64-bit version of the codec, you're limited to doing just that. You might be able to drop $160 on DVCPRO HD: MainConcept. No guarantees that'll even work though.
I'd just convert them to Lagarith Lossless Video Codec or Ut Video Codec Suite; they're lossless, free, and will both work in Premiere Pro CS5.

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I had to re-install Premiere Pro CS5 and now video are files acting funny...

Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
*Update* My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

here's my system info -
Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
   ----------------I only use one monitor, 1920x1200, 32bit color depth
   ------------------No Capture Card, No Sound Card or I/O box
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: TSSTcorp CDDVDW SH-222AL
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
---------- This 2tb Hitachi is my data drive - there are 600GB free (33%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
   ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
------------this 125GB SSD I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble. The only difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview, not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type. The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
My problem started while i was working on a project. I was working on the project for probably an hour and a half with no trouble. Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section. Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.
I shut down PPro, & restarted. No change.   I restarted my computer. No change.
Realizing that the problem was likely related to a lack of space on my data drive, i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free. i checked the drive for errors, and defragmented it. Premiere Pro still wouldn't play any file from any project.
The files are fine, they will playback anywhere else (several different file types involved in different projects). The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs (After Effects, Photoshop work fine).
I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall, neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part. I'm not surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before. (i've backed up many times before and this never affected PPro performance)
i tried to "CLEAN" the media cache for the sequence but it had no effect (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button). I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
I don't understand why a clean reinstall did not help in this regard. The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing. btw, i started a new project as well and imported a .mov file -- same problem, no video playback.
the weird thing is that i can actually still edit video. i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird. I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut, certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
thanks in advance for your help
Message was edited by: magneticjak
Message was edited by: magneticjak

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

Premiere Pro CS5 - Media Encoder Crash when Exporting to MPEG-2

System:
Core i7 920 @ 3.8 Ghz
Gigabyte X58A-UD3R
12GB DDR3 1600
External Sound Card - M-Audio ProFire 610
OS Drive - 2x300GB WD Raptors - Raid 0
Project Drives - 3x300 WD Raptor - Raid 0
Video Card - Geforce GTX 285 1GB
Adobe Premiere Pro CS5 and Media Encoder CS5 continually crashes or hangs every time I try to export to MPEG-2. I can successfully render to every other codec without any issue, but need the MPEG-2 for an Adobe Encore Project.
The project is approximately 38 minutes long and contains AVI and MP4 files, all of which were ripped from DVDs as I'm producing a reel for a producer who provided his DVDs for me to rip and use as content.
Possible issues:
1.   Currently have Magic DVD Ripper and DVD Fab installed (codec conflicts?)
2.   Originally ripped the DVDs at 630x360 (my mistake - hadn't really worked with a DVD ripper before and was the largest avi pre-set) and I'm exporting to MPEG-2 standard 720x480 Widescreen) (I know I should've just ripped them as the original lossless MPEG-2 files - I'm a tool)
2.   Blank space in the timline (there are a number of these)
I would like to get some input before I try to export to MPEG-2 again as I blew a capacitor on my old mother board (Gigabyte x58-ud3r) after I had gotten my computer to start rendering a MPEG-2 after about 50 tries to export/launch media encoder set on MPEG-2. I just installed my new motherboard to replace it. Clearly MPEG-2 taxes the system more so than any other codec (from what I can tell). However, I thought the issue with the blank space/no media in the timeline was fixed with CS5. I saw in a previous post that someone thought that ffdshow was conflicting with AME. I don't have ffdshow, but I believe that's a ripper program like Magic and DVDFab.

I experienced this at one point. Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime. (I have no idea why the quicktime player would have an impact.) However, reverting to an earlier version of Quicktime fixed the problem. Search this board using quicktime as a search phase. The quicktime web site allows you to download the earlier versions. I'm not at my editing machine, but I believe that I am at version 7.5.2.

Mov files in Adobe Premiere Pro CS5 - XDCAM (MPEG) resp MPEG 1/2 (xdvc)

Problem description:
I got a bunch of MOV files on a HFS+ formated disk for editing on Premiere Pro CS5 (5.0.3). When I import to Premiere, Premiere says "Codec missing or unavailable". Paragon HFS+ is used to handle the HFS+ formated disk. I copied the data to a NTFS formated disk before using.
The reseach I did give the following indications:
I did try to play in Quicktime and Quicktime told that I would need additional software to play the .mov file. But I could execute show movie inspector and it shows "XDCAM EX 1080i 50 (35Mb/s VBR)".
VLC plays (!) and tells that it is a "Mpeg 1/2 Video (xdvc)"
MediaInfo says "MPEG Video (XDCAM)"
Sound is (L)PCM according to the mov inspector programs.
The MPEG2 format seems to be supported by Premiere (also in HD), forum entries tell me I should be at version 5.0.2 as there Adobe supports the MOV container. So now my question: What am I missing?
I have no idea on the Camera used to film, but it could be a JVC, as it is told that the JVC writes mov files.

Hi Colin,
The explanation is quite simple and it appeared to me sometime during the weekend when executing completly different tasks.
The video source is different! The small clips (and your test clip) are what came from the camera and was transcoded to mov, my test clip was the edit out of FCP! It was by chance the only mov-file left, all others have been deleted after transforming to mp4, not to keep the data in double and fill up the disks with unnessecary data. So I tested this clip, which was the mistake!
Testing one of the original input files confirmed your result!
The difference between the files is having indeed 2 mono audio streams (input mov) vs one stereo stream (edit mov), all 3 obviously PCM.
Input MOV
Audio #1
ID                               : 2
Format                           : PCM
Codec ID                         : lpcm
Duration                         : 2s 760ms
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Delay relative to video          : 4h 14mn
Stream size                      : 259 KiB (2%)
Audio #2
ID                               : 3
Format                           : PCM
Codec ID                         : lpcm
Duration                         : 2s 760ms
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Delay relative to video          : 4h 14mn
Stream size                      : 259 KiB (2%)
Edit MOV:
Audio
ID                               : 2
Format                           : PCM
Format settings, Endianness      : Little
Format settings, Sign            : Signed
Codec ID                         : sowt
Duration                         : 9mn 26s
Bit rate mode                    : Constant
Bit rate                         : 1 536 Kbps
Channel(s)                       : 2 channels
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Stream size                      : 104 MiB (4%)
Thanks,
Lucien.

Premiere Pro CS5.5 Quit Unexpectedly. Mac 10.10.2.

Hey there,
My Mac just started popping up with the "Premiere Pro CS5.5 Quit Unexpectedly" box. Nothing has been done differently and the program has been working for years. Any help?
My Mac is a 2011 17" and currently has OSX Yosemite 10.10.2.

Hi Rotorbound,
Nothing has been done differently and the program has been working for years.
You updated OS X and that's a pretty significant change to your system. Have you tried common troubleshooting techniques?
Try the following:
Choose Help > Sign Out. Restart Premiere Pro. Choose Help > Sign In
Update any GPU drivers
Trash preferences
Ensure Adobe folder preferences are set to read/write in all 3 locations.
Delete media cache
Delete preview files
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
Disable App Nap
Reboot
Report back if anything here worked for you.
Thanks,
Kevin

Importing mov files in premiere pro cs5

I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
2. the next prob is my dymanic linking does not work.
Help please

Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
Gosford Lawrence
!https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
Date: Thu, 21 Apr 2011 17:40:14 -0600
From: [email protected]
To: [email protected]
Subject: importing mov files in premiere pro cs5
Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
Glad that removing ZA solved your issue.
Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
Good luck,
Hunt
>

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Adobe Premiere Pro CS5 / Adobe After Effects CS5

Hello,
I am working on a file using Adobe Premiere Pro CS5. I want to make the title in the file shatter like glass. I believe you would do that using Adobe After Effects CS5, but I am unaware of how I would go about it. Do I need to open up the whole file in After Effects, or would I open it up in Premiere and export it to After Effects. Once I have accomplished that step what is the easiest way of making the effect of the title shattering like glass?
Thank you,
Mark

Your memory is ill configured, since you are using it in dual channel mode instead of triple channel mode and 8 MB is about bare minimum. You would be better off if you were to increase memory to 24 GB. Secondly, your disk configuration is the absolute minimum requirement, so adding a couple of disks will help performance as well.
I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264
Mistake. It is one of the most demanding codecs on the market. Look here: Adobe Forums: System requirements for CS5
You could try the PPBM5 Benchmark to see how well your setup performs.

Cannot export to Quicktime in Premiere Pro CS5

This problem has been addressed before, but the solution, to simplify the name of the file, is not working for me.
I am not able to export to Quicktime. The error is "Unable to create or open an output file."
Here are my parameters:
Premiere Pro CS5, recently updated.
Windows 7, recently updated.
PC HP Pavilion desktop
Source footage is HDV in an mp4 codec via the CS5 timeline.
I have disabled my anti-virus software (ESET).
I have no other video-related programs running.
Clips appear in the Export screen (for preview) perfectly.
Exporting to any other codec or container, including H.264 (an Apple product) works fine. To make things
a little more interesting, the last time I tried to export to Quicktime (a year ago) I was using PPr CS4. Export
to Quicktime worked perfectly well. Now it does not. Now when I activate "start queue" in Media
Encoder for CS4, the green check mark appears without the clips being encoded at all. Once again, CS4
encodes to other codecs perfectly well.
Sounds like in the intervening year I may have downloaded some interfering software, but like editors
everywhere, I download a lot of these things. Finding the culprit would take days (weeks!). Are there
any prime suspects?
Alternatively, are there any other ways to export in high quality to let Mac users easily access PC
generated footage?

Mac users are the ones who choose to use an OS which creates this type of compatibility issue. Honestly, I'd just create an AVI and let them solve the problem.
Your clients must really appreciate you as a great "solution providor" Jim!

Computer Freezes during Playback, Render and Scrubbing in Premiere Pro CS5.5

CPU - Intel i7 980 3.33GHz
RAM - 12GB (6 x 2GB) Corsair XMS3 DDR3 1600
PSU - 850watt Corsair
Graphics Card - NVIDIA GeForce GTX 570
C: Drive - 600GB Velociraptor (with only program files stored on the drive)
OS - Windows Ultimate 7, 64-bit, Service Pack 1 (up to date)
Adobe Creative Suite 5.5 Production Premium (with all updates)
My problem occurs only in Premiere Pro CS5.5 and not with any other Adobe programs, including After Effects. Playback, scrubbing, or rendering in my Premiere Pro timeline causes the computer to freeze. When it freezes I cannot move the mouse, I cannot use the keyboard, there is no automatic shutdown, and there is no BSOD. The computer just freezes, forever, and needs to be shutdown manually.
This problem began a few weeks ago, only happening occassionaly. Recently the problem has escalated to the point that I cannot use Premiere Pro CS5.5 for more than 30 seconds before it freezes.
I have several different Premiere Pro projects saved to a 1TB WD Black Caviar HDD. In some of the projects I am using Cineform converted .mov files and in others I am using the raw(compressed) footage directly from a Canon DSLR. This dedicated harddrive has 60% free space.
Mercury PLayback Acceleration is enabled, and I have been successfully using Premiere and the rest of the creative suite intensively since October 2011 with absolutely NO problems. I cannot remember the system ever crashing once during this time period, until now, which is remarkable. All software on my computer is legitimate, and there are no third party codecs installed.
What can I do to fix this problem? All help is extremely appreciated. THANK-YOU!
Drew Norton

Thank you, Harm I will do this. In response to the video card being a possible cause of the problem, I moved forward and downloaded Furmark to test it. When running Furmark the program crashes. It gets going on the test and crashes, and apparently according to other websites this means my graphics card is not running at capacity. Do any of you have experience with this?
If it is as clean cut as a busted graphics card I would be very excited to know.

Exporting from Premiere Pro CS5 and DVD authoring

I have a reoccuring problem with Premiere Pro and authoring DVDs. This is how it goes.
I shoot a video using a Canon 5D Mark III. 1080p 24.
I then edit in Premiere Pro CS5, with proper settings on the sequence which are the preset Digital SLR > 1080p > DSLR 1080p24.
Everything is hunky dory.
Then I have to export...and the frustration ensues...
I export using the HDTV 1080p 24 High Quality export preset with the H.264 export codec. This gives me a decent .mp4
I then bring this file into Encore and author the dvd. I used the regular dvd and the blue ray export settings as a test, but the video always ends up looking horrible with artifacts all over the place, especially on areas of high contrast. It looks like a badly compressed .jpg.
This happens at various times when exporting animation/motion graphics from After Effects also. When I use a ramp in the background, the gradient is often very banded...
When I rent a movie from the video store, the images and type look good on whatever i play the dvd on or watch it through. When I burn a dvd, it looks universally bad using all kinds of players on all kinds of monitors, projectors, etc...
Can anyone lead be in the direction of an article or video that will thoroughly explain this so i can learn it once and for all?
Thanks in advance.

Jim, lol.
Thanks everyone as usual.
So, should my composition settings for after effects be set to 24 or 23.976 and can i render them as 16 bit?
Will this reduce the banding and artifacts along with using dynamic link? Or will it ultimately be 8 bit by the time the dvd is burned and go back to the banding....?

Dosbox ZMBV codec in Premiere Pro CS5.5?

Similar Messages

Maybe you are looking for