Dot Matrix / Impact printing under MacOS 10.6

As a last throw of the dice, after days of googling this is my last effort!
I'm looking for any dot matrix / impact printer (9 or 24pin) that is known to work and compatable with a new iMac running MacOS 10.6
I've read conflicting reports on using generic drivers on Epson printers, and wondered if anyone has actually tried it (with the use of a Keyspan USB adaptor for instance...)
Any reports, either good or bad, greatly welcomed!

Did you ever get an answer on this?
I ask because I need to "pick one" regarding a new impact printer.
I'm looking at a Lexmark 2590n...
Wondering if anyone has any experience here?
(getting info on dot matrix/impact printers for macs is.... difficult)

Similar Messages

Adobe print form on dot matrix printer

Has anyone tried to print adobe forms into a dot matrix printer i.e. printing multi-part documents. I've read that the device type supported are PostScript, PCL, PDF and ZPL. The help file specifically mentioned that SAPWIN device type won't be supported, but it does not mentioned explecitly weather ASCII device type or device type for dot matrix/impact printer is supported or not.
I'm still holding up hope that adobe print forms scenario will be able to do this since we are planning to go ahead with 100% adobe form solution.
Any info would greatly appreciated.

The supported output formats of ADS are PostScript, PCL, PDF and ZPL. That means that your printer has to support one of the mentioned formats to be supported. So the answer to your question is no.

Crystal Report , Dot Matrix printer , Landscape , Legal

Post Author: naser
CA Forum: General
IDE : VS .NET 2003,
Platform : .NET 1.x, .NET 2.0, Hello I have been working 4 day's only to get print job which is should be on legal size and landscape mode Here is my story , I have u2022    Dot Matrix Epson Printer (Defaults setting) u2022    Legal size paper First : In crystal report designer I setup printer I select the PAPER SIZE = legal Orientation = Landscape Using this code   Code:
Dim Frm1 As New Form1     Dim RV As New CrystalDecisions.Windows.Forms.CrystalReportViewer     CR.SetDataSource(PrintDatabase1.Tables(0))     RV.DisplayGroupTree = False     RV.DisplayToolbar = True     Frm1.Controls.Add(RV)     Frm1.WindowState = FormWindowState.Maximized     RV.Dock = DockStyle.Fill     RV.ReportSource = CR     Frm1.Show() When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know second : same situation but I add this code   Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know thired :   Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape CR.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape
Again When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know
Now after I changed the defaults setting for the Epson printer to Orintation = Landscape Paper size = Legal And used this code Code: SetDataSource(PrintDatabase1.Tables(0))       CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape       CR.PrintOptions.PaperSize = PaperSize.PaperLegal CR.FormatEngine.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperSize.DefaultPaperSize = PaperSize.DefaultPaperSize.PaperLegal The printer print in Landscape mode but it not printing the data which located in the right side of paper While that I checked the properties of printer from printer button in the crystal report viewer I found the orientation = Portrait I think its mean the program print the document by coding as landscape but printer receive it and print it as portrait because that it is not shown the right side of paper
i'm upgrade fees program for our Department which has been developed using Q basic language, and the were using same printer and same size of paper. they were printing fine without any prablem like what im facing help to get the help soon thanks for all the members

Question is already answered in link
Printing Speed on Dot Matrix
Jeyakanthan

Printing Reports to Dot-Matrix Printer

I have a customer that is trying to print a report to my company's dot-matrix printer and we keep seeing a "bold/unbold" command (7B, OB) where we should be getting actual bolded text. Is there anyone who has experience printing Oracle reports to a simple dot-matrix text printer? Can you suggest a printer emulation or fix?

The dflt132,dflt like.. files in c:\orawin95\rdbms\reports\print(may be dir is correct) for the printer and make sure that the file contains the correct escape sequence
like if bold escape "70",etc..
if you know Foxpro Special Char values,the samething you can apply in the dflt files.
Hope this helps.
null

Can I user Dot Matrix Printer under UTF8 character set ?

Hi,
We are using UTF8 character set. Somebody told me that I can only use the postscript printer. Is it necessary to set up a report server if I need to print on dot-matrix printer? Any workaround solution?
Thanks and regards
Toby

Your printer emulation and the SAP device type for the output device must match.
For example, if you use IBM Proprinter emulation, then use device type IBM4232.
If you use Epson emulation, then you may have a look at note 1135053.
What are your emulation and device type?

Does anyone know of a dot-matrix printer compatible with Mac OS X Lion?

We need to upgrade our system at work to Mac OS X 10.7 Lion. We need to find a dot-matrix printer to print our multi-part forms. We have been using an Epson FX-980 and FX-890N under OS X 10.4 (Classic Mode). I've tried to use the FX-890N (newer) using the Epson 9-pin driver supplied with OS X 10.7. The print quality is so bad it's almost illegable. I also tried different fonts in the hopes to improve print quality but have not been able to improve.
We have GOT to get to OS X 10.7 Lion, but cannot give up our impact printing capability. We are willing to buy a new impact printer if needed.
Please HELP!!!
<Email Edited By Host>

I tried your link, but it came back with no page found at Lexmark. We just purchased a LexMark Forms (dot-matrix) Printer Model 2580n after takling with sales support at LexMark. They confirmed that this printer worked with Mac OS X 10.7 (Lion). HOWEVER, after receiving the printer, and unsuccessfully attempting to get it to print, I called their tech support. They told me that their sales dept was incorrect, and that they do not have a dot-matrix printer that will work with OS X 10.7. They are in the process of issuing me an RMA# to return the printer with a full refund.
Nothing would make me happier than for you to prove them wrong. I DESPERATELY need to find a dot-matrix printer that does work with OS X 10.7.
Any additional input you could supply would be greatly appreciated. I look forward to your reply.

Smartform printing on Dot Matrix printer for continuous stationery

Hi Friends,
I'm throwing my smartform print output on printer using local printer .Now the problem is as i have designed the SF using A4 page size , the output on Dot matrix is my output (WHICH IS 1/3rd OF a PAGE) + rest of empty space which is actually wasting pages.
Settings in SPAD are as follows:
Output device : Lp01
Device type : SWIN
and page format : LINE_21
Format Type : LINE_21
What i want is a restricted output .please let me know the possible solutions and do i need to load the driver for my printer in SAP as well (Printer is : wipro WEP 800 DX)
Thanks and Regards,
Sachin Soni

Hi,
Change the page settings in the form
-> under the form attributes you can find the page format there you can set up your required format
Thanks,
Nethaji.

PO printing issue in Dot Matrix printer

Hi expert
We got unnecessary spaces on the second page while taking a PO print out.
printer is dot matrix- EPSON LQ2180.
Page Format DINA4
Device type is EPESCP2
Can any body help in this matter?what have i to do remove unnecessary spaces from PO printout?
And also i can not under stand the code which was written in Page Format DINA4?
please find below codes.Help to understand the below code as well.
Printer initialization
reset
\e\0x40
designate codepage for slot 0
\e\0x28\0x74\0x03\0x00\0x00\0x03\0x00
select codepage from slot 0
\e\0x74\0x00
set line spacing 6 LPI
\e\0x32
set page length to DINA4 (=70 lines at 6 LPI)
\e\0x43\0x46
cancel bottom margin
\e\0x4F
set left margin to 0
\e\0x6C\0x00
select LQ quality
\e\0x78\0x01
select non-proportional spacing
\e\0x70\0x00
Thanks
MM
Edited by: samir DODIYA on Feb 28, 2012 1:30 PM

There is something I don't understand: if the barcode printed is visually correct, and exactly the same as with a laser printer, why do you want it would be better with a PDF (especially on a dot matrix printer).
Could you also tell us what symbology you use, and do you use smart form new barcode technology?

Printing in Dot Matrix Printer

Hi to all,
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
Aditya
Consultant Business solutions.

Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline
, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
   1. Run SAP Business One.
   2. Click the upper menu 'File' and select 'Page Setup'.
   3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
   4. Click OK to confirm your selection.
   5. On your desktop, click Start => Settings => Printers.
   6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
   7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
   8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
   1. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
After you do the stepwise, I am sure there will no problem any more. The slowly printing mostly caused by printer type and your hardware specifications for example your LAN, etc..
good luck...
Rgds,
null

Is there a dot matrix printer that works with iMac

Trying to find an impact printer to do invoices on an imac computer, but no luck so far. Any ideas?
Bill

The Epson Networking Impact Printers are designed for high capacity environments and are Mac OS compatible. The IP networking printer drivers built into Mac OS X support the IP Network dot matrix printers, both 9 & 24 pin.
For example, for the FX-890N Networking printer you can use the driver "Epson 9-Pin Series" as shown below:
Epson's full-featured, FX-890N Networking printer offers the durability and ease of use required for essential daily printing. This 9-pin, dot-matrix, narrow-carriage workhorse boasts an MTBF rating of 20,000 power-on hours (POH) and speeds of up to 680 cps (characters per second). Engineered for seamless integration, the FX-890N's interfaces include an internal 10/100 Base-TX Ethernet print server with support for Macintosh OS X.
Its easy-to-install 7.5 million-character ribbon cartridge boosts productivity and ensures a low cost per page, while its 400 million-character print-head life heightens its dependability. Included Epson Remote Configuration Manager software simplifies printer setup and setting selection. Ideal for rugged environments, the printer is a perfect drop-in replacement for the Epson FX-880/880+/980 or Okidata Microline 320/320 Turbo. It handles forms up to seven parts thick via four convenient paper paths, and its redesigned control panel features a lock-out mode and other intuitive functions. The printer is Novell tested and approved and is backed by Epson's comprehensive three-year warranty with technical support. The Epson FX-890N offers the durability and ease of use required for criticaldaily print requirements. Speeds through multipart forms,reports, labels and more at up to 680cps.Offers an MTBF rating of 20,000 POH and a 400 million character print head life.. Includes 10/100Base-TX Ethernet Interface for easy networking.
Printing Method: 9-pin, impact dot matrix
Print Speed:
Ultra Speed Draft: 680 cps (12 cpi); 566 cps (10 cpi)
High Speed Draft: 559 cps (10 cpi)
Draft: 419 cps (10 cpi)
Near Letter Quality: 104 cps (10 cpi)
Characters & Lines
Character Sets:
13 character tables
13 international character sets
Resident Bitmapped Fonts:
Ultra Speed Draft: 10, 12 cpi
High Speed Draft: 10, 12, 15, 17, 20 cpi
Draft: 10, 12, 15, 17, 20 cpi
Near Letter Quality (Roman / Sans Serif): 10, 12, 15, 17, 20 cpi, proportional
Bar Code Fonts: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET, Codabar (NW-7), Industrial 2 of 5, Matrix 2 of 5
Characters per Line: 80 characters at 10 cpi
Line Spacing: 6 lines per inch default
Formatting:
1/6-inch or programmable in 1/432-inch increments
8 lpi option available on FX-890 Okidata Mode only
Paper Handling
Forms: Continuous multipart, original plus 6 carbonless copies, 1 + 6 copies with pull tractor, maximum thickness .018"
Envelopes:
No. 6 envelopes: 6.5" x 3.6"
No. 10 envelopes: 9.5" x 4.1"
Width:
Single sheets: 3.9" to 10.1"
Continuous: 4" to 10"
Cut-sheet feeder: 7.2" to 8.5"
Length:
Single sheets: 3.9" to 14.3"
Continuous: 4" to 22"
Cut-sheet feeder: 10.1" to 14"
Labels: Minimum: 2.5" x 0.94"
Roll paper: 8.5" width
Paper Feed Speed:
62 millisecond per 1/6"
5" per second, continuous feed
Paper Path:
Manual insertion: Front or rear in, top out
Cut sheet feeder: Top in, top out
Tractor: Front, rear or bottom in, top out
Pull push tractor: Front or rear in, top out
General
Printer Language :
Epson ESC / P
IBM PPDS
Okidata Microline (FX-890 Okidata Mode only)
IP Networking Interface:
EpsonNet 10 / 100Base-TX Ethernet Print Server
Input Buffer : 128 KB
Control Panel: Functions: Font, pitch, pause, tear off, bin selection, line feed, form feed, load, eject, micro adjust, top-of-form adjustment, panel lockout, reset, menu, default setting selection
Sound Level : 55 dB(A) (ISO 7779 pattern)
Rated frequency range : 50 – 60 Hz
Input frequency range : 49.5 – 60.5 Hz
Dimensions : 16.3" x 13.8" x 6.6" (W x D x H)

Dot Matrix Printer for OSX

What Dot Matrix printers are supported in OSX? Any OkiData's or Epsons? Thanks

No others included in OS X that I know of. I understand that problem with the included drivers (You find them under ESP instead of Epson) is that they don't reset correctly to the top of the form - so printing labels probably doesn't work. You should try it for yourself.

Detect the clients type of printer, either laser or dot matrix

Is there a way to obtain the clients printer whether it is laser-printer or a dot matrix?
I will appreciate any answers, sample programs, & suggestions. Thank you.

Hi,
The ("Windows side" of an) Intel Mac would act in the same way a PC (without a built-in parallel or serial port) does. You would need an appropriate USB to (usually) parallel adapter. With the new hardware added, you would choose the printer in Windows. Printing is then possible from within a program running under Windows.
Normally, a dot matrix printer is used only for special purposes (e.g., for multiple copy forms). If this is not the case, there are alternatives. I can understand if you do not wish to use an inkjet printer, but a (black and white) laser printer would probably be a much better solution. Many laser printers (USB and/or network models) work with both Mac OS X and Windows.
Jan

Crystal report printing using epson dot matrix printer (continouos paper)

Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiff

Check with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek

BMP image not printing on LIPI Dot MAtrix printer

Hello everybody .
I am facing a promlem while printing a signature ( bmp image ) in a report .
In print preview it is showing coreclty but while printing to LIPI Dot matrix printer model TALLY 2500 that Signature( bmp image ) is not getting printer.
Can anybody let me know wether any setting is to be done from SAP side .
Thanks in advance .
Regards
Dhaval..

Hi Raje,
Try to take the print in inkjet or laserjet printer
just for confirmation purpose .
if it prints in that and doesn't print in dot matrix then the problem is with the dot matrix.
In that case ask the basis guys to install the relevent device driver for that dot matrix printer( as normally they would have installed some generic driver ).
Hope this helps.
Regards,
Guru
*mark helpfull answers

Print to Dot-Matrix-Printer

Hi,
My actual job is to create an Report in Oracle Reports 10, running on an IBM AIX Unix Server and direct the output to an Dot-Matrix Printer.
The Report is ready for Preview.
What Parameter should be set as Report_DesFormat for that Dot-Matrix Printer?
I found only the list HTML, HTMLCSS, PDF, RTF, POSTSCRIPT, XML but the Printer can not unterstand any of these formats.
Thanks for any help
Rolf Mamat

Hi.
Using one of graphical destination format can lead to unexpected results. What you should do is to configure your printer at the system OS level. Then you should include that printer into $ORACLE_HOME/guicommon/tk/admin/uiprint.txt file. The line you add to this file should be read as printer_name_you_specified_at_os_level:ASCII:1:some_comment:: For example :
my_dot_printer:ASCII:Testing printer::
Be aware of two colons at the end of the line.
For a destination format you should use one of predefined formats (dflt, wide, ...) or you can make your own format file which should be stored in $ORACLE_HOME/reports/printers directory. And dont forget to define your report design in character units.
Hope this answers your question.
Best regards.

Dot Matrix / Impact printing under MacOS 10.6

Similar Messages

Maybe you are looking for