Dot Matrix Print to Laser Print

Hi
ZQM_INSP_RESULT this Program Gives Out Put in Dot MAtrix Print Format.
but I want it the Report in Laser Print Out....
How to Do This?
I gone through the program bt im not Understanding aything...
Can Anybody help me on this?

hi,
cn you please check this link
it would helpful to you
Print out issue in PO
Thanks and regards
Durga.K

Similar Messages

Replacing Oki Data Dot Matrix with HP Laser printer

Does anyone know of a driver that would support dot matrix printing?

Please provide some additional details. Are you looking for a printer driver that would accept Okidata format and print it on a laser printer because you have a legacy application that only supported this format? What operating system are you using?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Different btn dotmatrix print and laser print

hello sap experts
how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
thanks in advance
regards
Jenny

Hi,
Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
Refer note:724904 for instructions printing in sap b1using dot matrix printers.
More over you have to set the alignment(as often it gets changed).
And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
I suggest you to go for laser printer if it is affordable by client.

Stop rolling the the paper out in dot matrix priner once the print is done

Hi,
I have used the below code to print a document and the printer used is dot matrix But,it rolls out the page once the print is done.
I want to control the printer so that it stops rolling out the page once the print is done. Or set the print based on the paper size and stop rolling the paper.
public void Print_Doc(string Path)
try
Microsoft.Office.Interop.Word.Application word = new Microsoft.Office.Interop.Word.Application { Visible = false };
Microsoft.Office.Interop.Word.Document doc = new Microsoft.Office.Interop.Word.Document();
// where did you get this file name?
// as you mentioned, you open your word document here
doc = word.Documents.Open(Path);
// in your button click handler, just call PrintOut() function
// if doc == null, open the document
if (doc == null)
// here i assume fileName has been assigned
doc = word.Documents.Open(Path);
doc.PrintOut();
catch (Exception ee)
MessageBox.Show(ee.Message, "Exception", MessageBoxButton.OK, MessageBoxImage.Error);
return;
Please help me resolve this,
Thanks,
Shreyas M

Not so much wpf there.
Keep an eye out because this thread may be moved to another forum.
I think Word will "throw" the page at end.
You could check the advice here:
https://support.microsoft.com/en-gb/kb/233493?wa=wsignin1.0
See if you have an unwanted page break or something like an outsized table which is making it think it needs to print more.
You might get lucky.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Distorted printing to dot matrix epson LX-300 printer

the problem im having is the same as the one mentioned here:
http://social.technet.microsoft.com/Forums/windows/en-US/ab12901e-4b1e-4a25-bdb6-25c2c4f576e8/ie8-dot-matrix-printing-issues?forum=itproxpsp
the basic problem is that when i print from a computer to an epson LX300 printer using firefox the spacing between letters seems distorted. you can find the image of the problem on the link above.
the only difference is that they are talking about using IE 8 while im using firefox 26. the user Joel-MMCC made the best explanation of the problem except that firefox is not running on trident. but it seems to be exhibiting the same problem at random. i have about 10 computers on my network but only 2 are having this problem. and i could not for the life of me figure out why.
when i tried the work around of changing the print resolution from the default 120x72 to 120x144 it seems to fix the problem except that the printout fonts and letters are now too far spaced. and since our webapp is already optimised to print on the 120x72 resolution and because we have fixed continuous forms that we print to, this work around will not work for me.
i tried installing IE9 on the troubled computer and it seems to work. the only problem is our webapp is optimised for firefox. certain javascripts dont work on IE.
im really at the end of my wits here. any ideas?

well, i have this same problem too. my only solution is to not install most driver.
@akinga: i agree, i thing it's somehow related to vga driver, and it seems only affect the new intel's. the old ones work just fine with all driver installed.

Dot matrix printers Capable of printing TABLE lines In Smartforms

Hey guys,
we are using EPSON LX-300+ (dot matrix pritner)
but the problem is,
it is not able to print table lines present in a SMARTFORM..
it can print the same table lines presnet in SCRIPT ...
so i want to know,
all the dot matrix printers in the market...
that can print table lines in SMARTFORMS...
(pls suggest the DM printers u are using and dont have this problem..i.e unable to print table lines in SMARTFORMS)
thank you...

Hi Sreesudha,
I have used three different line types for the main window.
LTYPE1(Header) : For printing the column heading along with the title for consignor address.
LTYPE2(Main Area) : For printing the line items detail. For the first line, I have to print Material Description and chapter Id and if the same material exists for the second line item, then it should not be printed, so I have written condition for not printing it.
LTYPE3(Footer) : For printing the footer with the net and gross weight details.
And for paragraph format, I have used the custom Para. Format only.
Suggest me ASAP.
Rgds,
JK

Printing to laser printer looks terrible

Ever since PS CS3 I've noticed that when I print a 300 dpi grayscale image to my laser printer directly from Photoshop, it comes out as if a 72dpi benday screen had been applied. Never happened in earlier versions. I used to get excellent black-and-white print quality through Photoshop, just using the default settings.
I have 300 or 600 dpi grayscale images, usually with a lot of clean black lines. But whether I set to "printer manages colors" or "Photoshop manages colors", and no matter what profile I select, I get the same halftone (awful) result on my HP Deskjet 3330. The printer's settings are fine. If I print the same image from any other application, such as Quark or MS Word, the print quality is fine.
PS has always been a bit confusing to me regarding printing settings. Can someone tell me a way to get my 300-600 dpi images to print properly, without halftones applied?

Of course the first thing I did was check my printer settings. This is what baffles me. I have only one printer setting which I set up as default for all programs, including Photoshop. In CS2 and earlier versions, anything printed from Photoshop came out exactly like prints from any other app: 600dpi fine quality. But now (since CS3) ONLY Photoshop printouts come out in this 72 dpi halftone. Using the same default printer driver settings when printing from Flash, Word, Corel, Quark, IE, Firefox, I get fine quality printouts.
This is why I am asking for advice! Obviously there is a setting within Photoshop that I am doing wrong. Probably something obvious.
Please treat me like I'm stupid. How do you 'check halftone settings in Photoshop'? is that dot gain? I have print settings for 'grey dot gain 20%', which is what I've seen it set at since I started using Photoshop 3.

IMac G5 no longer prints to laser printer over ethernet network

I have a small office with 6 iMacs networked via ethernet with a Netgear Router. Printers are connected to one machine and people send to print over the network.
3 iMacs are G5. 3 are Intel. All run OS X 10.5.8.
A month ago one of the G5 iMacs stopped being able to print to a Brother laser printer (which is connected by USB to an Intel iMac). I believe this happened after we downloaded a periodic Apple update. About 2 weeks ago a second G5 iMac developed the same problem. The 1st G5 iMac still prints fine to an inkjet printer connected directly to it by USB.
We have tried re-loading drivers, but no improvement.
Any suggestions as to how we can resolve this?

Hi DaddyPaycheck
The iMacs that can't print can see the printer. We have deleted and re-installed via the printer system prefs too. There weird thing is that you can select the printer and send to print, but for some reason the printer then automatically pauses and you can't resume it. The file is listed by the status is 'stopped'. When you open the printer queue on the Intel iMac that the laser printer is connected to, no print file shows up at all...
We also ran the network diagnostic that you can do when in printer system prefs and that reported that "the G5 iMac could connect to the internet, but not the Server "brother HL 4040CN series-1@ben's-iMac-2.ipp.tcp.local" "
Hope there's a clue in there somewhere...
R

Issue in Cheque Printing using Laser Printer

Hi,
There is a requirement wherein cheque needs to be printed from F-58 using Laser Printer.I have created the custom page format for Cheque printing .Attached it to the custom device type that i have created(Copy of Device type HPLJIIID).Aslo i have attached the page format to the tray1 of the 'Tray Info' tab of Output devices in SPAD.
I am getting the print information correctly on the cheque but what happens is that the Printer gives an error message saying'Jam in Fuser Area' and the cheque has to be taken out of the rear door of the printer,it doesn't come out automatically.As a result for
printing the next cheque, printer has to be restarted.
Require your help on this.
Regards
Vinod

Hi All,
Forgot to mention one thing.I am making use of script ZF110_PRENUM_CHC (copy of standard script F110_PRENUM_CHCK)
for cheque printing.

Print with laser printer

Hi everyone,
I'm developing an application that should print its JTexPane with 'Arial Unicode' font. I use a styled document. When I print with a deskjet, there isno problem ,my text is perfectly rendered.
But, when I print with the laser printer, the text is always in bold. This printer doesn't accept 'Arial Unicode' in its properties. I have to be able to print unicode font (chinese, ...) and the printer doesn't have any unicode font in its settings...
Is there anything I can do ?
Thank you.
Pascal

I am also experiencing similar problems. I am trying to print a JEditorPane rendered HTML-document. On screen it looks good, but when sending it to either a PDFCreator or printer, bold and italic text looks really wierd. Does anyone have a solution to this problem?
I can post some code or the PDF file if someone wants to see it.
Thanks in advance.
Magnus

Print to laser printer without having overprint.

I have a document with an overprinting element and want to print to a laser printer but the top overprinting element is showing everything underneath. How can I print this and have it show up as seen on screen without the overprint showing?

To farther complicate things, I print "as Image" on my mac using Acrobat 8 and the document prints as on screen without showing the overprints. When I go to a Windows machine using the current version of Acrobat Reader and print "as Image" the overprinting shows up on the laser.

Barcode printing in Laser printer

Hi ,
I am trying to print barcode on HP 5100 laser printers.On R&D I found there are two solutionn to print barcodes
1. Use Barcode.dll ( only with help from SAPLPD )
2. Use Bardimm ( Jet caps ) from HP
Is there any other solution to acheive barcode printing .i.e without using any additonal softwares/hardwares.?
Advance thanks for a reply ASAP.
Ugesh

Hi,
To be honest, I faced this problem some time ago and I couldn't find a solution which didn't include additional software being installed (and a licence fees apply).
I didn't even try writing my own program to act in a similar way (so we could save some money on license fees) as it would cost more than the licence anyway. If you include costs of testing and maintenance then it works out that the solutions available on the market are not as expensive.
The one we use works well but only works for printers which support PCL (most of them do nowadays) and requires additional software and some fees.
This solution is provided by e-bizco.com GmbH.
Basically your barcode is transformed by the program sitting on your server (as a service). It is transformed into PCL format and printer processes it. It works on various OS including Windows and AIX.
Thanks,
Wojtek

Are inkjet printer or laser printer economical?

I was wondering which kind of printer is less expensive to use?

This is a difficult question to answer, and depends on several factors such as:
What is your expected printing volume per month?
What will you print - black text, mixed text and graphics, photo's?
In general, for printing black only laser printers are more economical. Like inkjet printers, laser printers have a wide range of cartridge sizes and costs per page. For both inkjet and laser printers the lower cost printers typically have lower capacity cartridges and higher costs per page compared to the higher end models. Some higher end inkjet models such as the Business Inkjet Pro models have lower cost per page than the low end lasers. Higher end inkjet models tend to be more efficient when printing larger runs, less efficient when printing a page here and a page there.
There are few resources that may help: HP's pageyield site lists the page yield per cartridge of recent printer models. Note that many inkjet models have standard and "XL" cartridges. The latter have generally better cost per page, they may give 3x the pages at 2x the price. Some laser models have similar offerings. There is also a guided site here that will ask various questions about your printing needs and then suggest suitable HP printer models.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Inkjet printer or laser printer--which is the more desirable?

Sorry ... there is no other category to ask this....but if price is not the issue... what printer would be the best choice for an iMac? ..... and what namebrand and model would u recommend? .... and how reliable is a printer that is not hardwired to the computer (but rather info sent wirelessly to the printer)?
(... i forget the differences between laser and inkjet....)
...PS the printer will be used for basic color printing and ideally also for photo prints as well....

Sorry ... there is no other category to ask this..
Sure there is but regardless, the Camera and Photos discussions for the iPhone is not anywhere close.
Under Mac OS X v10.4 Tiger:
http://discussions.apple.com/category.jspa?categoryID=160
And below that is a category named Printing & Faxing.
http://discussions.apple.com/forum.jspa?forumID=756

Barcode printing using dot matrix printer

Hi,
Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed without barcode.
Thanks in advance.
Sachin

closing thread

Dot Matrix Print to Laser Print

Similar Messages

Maybe you are looking for