Dot1 tunnelled VLAN via L2TPv3 IP routed enviroment problem

I have an objective to transparently interconnect two Cat 6506 switches using dot1q trunk via ethernet switched and IP routed enviroment.
6506 trunk - 3560 dot1q tunnel via vlan 2 - 7206 terminating vlan 2 and xconnect to neighbor 7206 - 3560 with vlan 2/dot1q tunnel - 6506 trunk.
I've divided problem to 2 possible stages - QinQ and L2TPv3.
Realized QinQ works well by assigning/pinging first 7206 IP terminating dot1q tunnel.
Now I have tunnel up, dynamically negotiated with ip mtu, ip sequencing both etc, all default, but I only see sent bytes at first 7206 and no received and received/no sent bytes at the second 7206.
So it actually looks like bytes go just via one direction, from 1 7206 to 2 7206 and not the opposite direction.
What are these counters for? Only for tunneled VLAN or whole L2TPv3 tunnel? Cos hellos should create both traffic sent and received on both 72xx's.
I am confused and can't ping/trunk from the remote 3560. It's under ISP responcibility.I also cant SPAN/VSPAN for some reason to ethereal/analyze it.
Any gurus?

Counters indicate total packets sent and receive for the current session.Sometimes MTU sizes could be a reason for the tunnel not working.Refer URL for configuring MTU forhttp://www.cisco.com/en/US/customer/tech/tk801/tk703/technologies_tech_note09186a0080094c4f.shtml#frag_example

Similar Messages

Dot1 q tunnel via L2TPv3 problem

I have an objective to transparently interconnect two Cat 6506 switches using dot1q trunk via ethernet switched and IP routed enviroment.
6506 trunk - 3560 dot1q tunnel via vlan 2 - 7206 terminating vlan 2 and xconnect to neighbor 7206 - 3560 with vlan 2/dot1q tunnel - 6506 trunk.
I've divided problem to 2 possible stages - QinQ and L2TPv3.
Realized QinQ works well by assigning/pinging first 7206 IP terminating dot1q tunnel.
Now I have tunnel up, dynamically negotiated with ip mtu, ip sequencing both etc, all default, but I only see sent bytes at first 7206 and no received and received/no sent bytes at the second 7206.
So it actually looks like bytes go just via one direction, from 1 7206 to 2 7206 and not the opposite direction.
What are these counters for? Only for tunneled VLAN or whole L2TPv3 tunnel? Cos hellos should create both traffic sent and received on both 72xx's.
I am confused and can't ping/trunk from the remote 3560. It's under ISP responcibility.I also cant SPAN/VSPAN for some reason to ethereal/analyze it.
Any gurus?

Packet counters shows the number of packets sent and received from the remote end.Look for the configuration on the other end of the router.Refer URL http://www.cisco.com/en/US/products/sw/netmgtsw/ps4748/products_user_guide_book09186a008035322e.html for more information.

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Trying to connect my wired PC to the wireless airport express via the wireless router.

Trying to connect my wired PC to the wireless airport express via the wireless router. TP-link wired/wireless router. Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever. The amber light is blinking. Thanks in advance for the help!

If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
Wired should be easier. Just use a network cable to connect to the router. Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings. If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports. Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb. Join that network and, using the AirPort Utility, configure your AX as a network client. Go to Wireless > Wireless Mode: Join a wireless network.
Select your router wireless network from the drop-down menu, select the appropriate security and type in your password. Click update.
It'll restart and automatically join your network. Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
Let me know if this worked.
Jorge...

Questions: cannot connect via wireless laptop (router WR...

Questions:
cannot connect via wireless laptop (router WRK54G)
cannot secure my network using WEP

from the wired computer , access the router using http://192.168.1.1 . the default password is admin
on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

Can I print from my iPad 2 via a wireless router to a kodak printer

Is it possible to send a document from my iPad via my wireless router to a kodak printer.

It's possible with AirPrint. See:
AirPrint Information and FAQ: Apple Support Communities
iOS: AirPrint 101
If the printer does not support AirPrint then you may be able to activate it with AirPrint Activator 2.1b2 or Printopia 2.1.4.

New VLAN config on Cisco router

We are in the process of rolling out VOIP with new Cisco router
configurations. When the VLAN config is changed on the router it can no
longer ping the server. The router config is setup with secondary IP info
so that we don't have to go thru the process of changing IP config on the
NW 6.5 SP 6 servers.
Has anyone seen this issue? Do I need to bind new VLAN ti IP NICs? Any
other thoughts?
Thanks for any help received,
Todd W Carter

On 6/5/2007 Todd W Carter wrote:
> We are in the process of rolling out VOIP with new Cisco router
> configurations. When the VLAN config is changed on the router it can no
> longer ping the server. The router config is setup with secondary IP info so
> that we don't have to go thru the process of changing IP config on the NW 6.5
> SP 6 servers.
>
> Has anyone seen this issue? Do I need to bind new VLAN ti IP NICs? Any other
> thoughts?
When pinging from the router, the packets will be source from its primary
ip address. If the server's subnet is part of the secondary IP address on the
router, you must use an extended ping in the router for it to work.
However, I recommend implementing router-in-a-stick instead of secondary IP
addressing when creating multiple VLANs.
On the router, you can create sub-interfaces under the LAN interface and deploy
dot1q trunking. At the switch-port, configure dot1q trunking as well and the
router
will route between VLANs while providing a better design.
This is outside of the scope of this forum so I recommend posting in the Cisco
forums at http://forum.cisco.com/eforum/servlet/NetProf?page=main
Thanks !
Edison Ortiz
(Routing & Switching, CCIE # 17943)

HT1459 Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating.

Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating. When I try to activate it via iTunes on my HP laptop, it won't do it either. Very frustrated and unimpressed.

You are running into the activation lock.
iCloud: Find My iPhone Activation Lock in iOS 7
You have to either enter the Apple/iCloud ID and password in order to activate the iPod for use. Or you can try to dissassociate the iPod for that account by:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
If you can't do that you have a nice, thin but expensive brick

Apple Product connection to Internet via a Wifi Router on a Class B Network

Hi, I am trying to connect my Apple devices to the Internet on a Class B network via a WiFi Router. My devices did connect via the same Wifi Router when it was on an A Class Network (which has changed to B Class), so don't suspect router.
Is there a configuration change required on the Router or Apple device to make it work on the B-Net?
Any advice appreciated.
Regards
Matt

Hey MattnDonna!
You may want to make sure your wireless network conforms to the following settings:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
If you are still having issues connecting your devices after adjusting those settings, you may need to use the following articles for further troubleshooting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

SPA2102 behind router fax problem

I'm having problems with fax send/receive when SPA2102 is connected via D-link router. Faxes just cannot connect or recognize each-other. No any problems if connected directly to cable modem as a bridge. Voice function works fine no matter how it is connected. Is it fixable?

Basically, this can't be done without the support of all the routers on the route (assuming you're talking about NAT routers): each router needs to forward a known port all the way from the "outside" to the inside.
An alternative would be to use some sort of rendevous server that's on the "outside" for all participants.

My original apple id is not an email address . I bought iCloud memory via that same account no problem. When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address . Made new account but can you change originalI'

My original apple id is not an email address .
I bought iCloud memory via that same account no problem.
When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address .
Made new account as per instruction ie [email protected] works fine
BUT as I want to utilise the money spent on the additional memory it would be great to use the initial account set up as my primary HOWEVER as far as I have tried the initial apple ID CANNOT be changed. Bit confused actually any usefull guidance will be greatly appreciated. Thanks

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
lmerchant wrote:
My new phone has an old apple ID associated with iCloud only. I cannot delete the account as it has "Find my iPhone" turned on.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and readded through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem

Help
WiFi only works close to router, DNS fail, Signal Bars present but Safari says no Internet, I've deleted and re-added through to reset and full reset, I had no problem with 4.3.2 only 4.3.3 both my iPhone4 and my iPad2. I am now beside router - no problem, but go 20 metres and WiFi becomes unstable. Only way to get either to work is disable WiFi either as a Hot Spot or turn it off and use the 3G connection. This worked with 4.3 & 4.3.2 what has gone wrong? I raised it at the Apple Store in Belfast as a problem but was told that there was no problem with Apple but I must have a faulty router - yeah - that's a lot of faulty routers, my home, my office, my holiday home, Starbucks, my friends house, my son's house. I've tried all the 'fixes'. I think it is a plan to force us to buy Apple Routers

Two ways out, I added two more Belkin Access Points in my house in Spain so that I'm not more than 10Mtrs away, (Reinforced Concrete & solar glass 2010)
I bought 3 Apple Airports, 1 x Extreme and 2 x Express (1 as a hard wired AP, 1 as an extender) for my other house (Brick construction 1930's)
Everthing now works perfectly, as I said 'an apple plot', so either blast them with signal or visit your nearest apple store.
Early beta iOS5 (iPad) is also much inproved in Beta 3, I have not had any problem with 'Lion'
Happy hunting!
john

I cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!

Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.

Dot1 tunnelled VLAN via L2TPv3 IP routed enviroment problem

Similar Messages

Maybe you are looking for