Dot3svc service not running in Windows 7. Error code:1747(0x6d3)

When i try to start the Wired Autoconfig service the following Error is being shown and the dependent services were already started.
Error 1747: Authentication service Unknown
I am not able to even start or stop the dependent services as they are grayed out.
When i tried to stop the dependent services through CMD the following error was shown:
[SC] Controlservice failed 1052
[SC] Controlservice failed 1062.
Please adivice

Hi,
You can reset the winsock first, and then check if this issue can be fixed:
netsh winsock reset
if this issue persists, I suggest you import a good known copy of following registry
to your computer:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dot3svc
Alex Zhao
TechNet Community Support

Similar Messages

Diagnostics policy service not running on Windows 7 home premium

I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
Error code is 5: access denied

Hi,
Thanks for the post!
Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
After that, check if you can connect to the internet.
For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
Restart the computer to check if this service is working now.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Cisco NAC agent services not running on Windows XP

Hi,
I've problem with Cisco NAC agent services on Windows XP professional SP3.
After first installation using user local administrator, the services of Cisco NAC agent on windows machine running well, but after logout, and login using another user which is registered in domain users, the services of Cisco NAC agent is going to stopped (going to Manual mode not automatic, and the status is stopped).
This situation is not happened on all windows machines, several machines running well.
Cisco NAC agent version 4.9.0.42
Has anyone seen this type of problem?
Below i attached windows machine information from ones running well and not running, Thanks
Regards,
Rian

Hi thanks for your answers, dbconsole is started in services.msc and also Agent, but goes on to say that the agent is not running.
In sysman log shows this,
"03/20/2012 13:38:54,553 [MetricCollector: HOMETAB_THREAD600: 60] ERROR rt.DbMetricCollectorTarget _getAllData.328 - oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
oracle.sysman.emSDK.emd.comm.CommException: Exception in sending Request :: null
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_ (EMDClient.java: 1330)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest (EMDClient.java: 1223)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics (EMDClient.java: 640)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab._getAllData (DbHomeTab.java: 324)
at oracle.sysman.emo.perf.metric.rt.DbHomeTab.getData (DbHomeTab.java: 139)
at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData (MetricCached.java: 402)
at
at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run (MetricCollectorThread.java: 320)
at java.lang.Thread.run (Thread.java: 595)
20/03/2012 22:00:03,335 [JobWorker 772: Thread-13] ERROR em.jobs executeCommand.161 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup parameters required to September."
In event viewer shows this,
"Agent process exited abnormally DURING initialization." but this message appears a few hours after having started the service.
I am using the Administrator account

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

Windows Modules Installer - Autostart Service Not Running

I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error. I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service. However,
from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan.
Just curious if anyone else is getting this.
Autostart Services Not Running:
Windows Modules Installer

Hi MattSla,
On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?

Please repost in a VMWare Fusion forum, you can find it at:
http://communities.vmware.com/community/vmtn/desktop/fusion.

Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

Window search service not running

window search service not running how i can fix it?
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Windows NT Error code = 87 when stopping Oracle9iASHTTPServer service

We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine.

We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine.

Lightroon CC upgrade will not run on windows 8.1

Ran Adobe Creative Cloud updates today, all updates installed and are working OK except for Lightroom, it will not run when opened, no error messages appear and windows trouble shooter reports it as lightroom is incompatible. I have done a complete manual uninstall, reinstalled and the problem still exists. Does anyone have the same problem or a possible fix

Hi
After installing lightroom CC you must sign out and oce again sign in from the creative cloud.
Do this by:
Preferences>Account>Log out from the creative Cloud.
Let me know if it worked.

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

Dot3svc service not running in Windows 7. Error code:1747(0x6d3)

Similar Messages

Maybe you are looking for