DotMatrix Printing from CR

I'm Using Crystal Report XI R-2 And VS.Net 2005 for my Development.
I need to provide Invoice Printing on Dotmatrix Printer.
Kindly advise me how to take fast printing on Dotmatrix.
Awaiting ur kind help.

The .NET framework only supports True-Type fonts. When exporting to text there is no font information stored so it is a true pure-text document that the printer can use its internal fonts to print out.
However when exporting to text font information is retained and as the true-type font is probably not your printer font the printer will take longer to print it. Even if you select your printer font for the fields in Crystal, if it is not a true-type font supported by the framework it will be substituted at runtime for a true-type font.
This unfortunately is out of our control as it is the way the .NET framework behaves.
Trevor

Similar Messages

PDF output generated by XML Publisher is not printing in Dotmatrix Printer

Hi All,
We have designed a template for a particular concurrent program to print it's output format in PDF. The concurrent is running fine and it has produced the output in PDF format. But we are unable to take a printout of the output in our Dotmatrix printer (Epson FX2175). We configured PASTA driver as per the Metalink Note ID: 739186.1. By using this Configuration we are able to take printout in our hp LaserJet 1320 printer. But not able to take printout in Dotmatrix printer. If anybody faced the same problem and find a solution please share here. Any help would be appreciated.
Thanks in Advance,
Regards,
PLS
Edited by: user10088016 on Oct 31, 2008 9:41 PM

Hi,
I have a similar issue, where the output is coming with some junk characters while printing to the printer. I contacted my System Administrator regarding the PASTA driver being installed on the printer and it is already done, but I am still having the issue.
I am trying to print it from the Bursting control file, using following command : <xapi:print id="LOCALPRINT" printer="ipp://192.168.1.73:9100" copies="1" />
Can anyone help me out on this.
Thanks and Regards,
Sumanth

Printing is very Slow on DotMatrix Printer

Hi,
I need to print the report directly on locally attached printer without appearing the printer selection screen. For this I implement the following code
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, RUNTIME); --- BATCH, RUNTIME
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, PRINTER);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT,'PDF'); --- 'html'
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'repserver');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_OTHER,'paramform=NO');
After execution , it gives the error " FILE DOES NOT BEGIN WITH '%PDF'
but when I simply use
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
Report is open in PDF format successfully.
1) How can I take the output directly on the printer.
2) How report can be taken fast on DotMatrix Printer,
( when if I take the print out from the PDF generated reports on only DotMatrix Printer it takes huge time, not the other laser printer. )
Kindly Help me
Regards.
Priya

I am printing to a R2400 with the same issue. I have everything up to date software, firmware, etc. I just updated to OS 10.4.5 and this actualy increased the speed by about 25% but it's still slower thtn should be expected.

'Dunning Letter Print from Dunning Letter Generate'

hi,
How can i run the "Dunning Letter Print from Dunning Letter Generate" standard program without runing the spwaned program called 'Dunning Letter Generate'.I mean i want to run the 'Dunning Letter Print from Dunning Letter Generate'(execution method: report) independently.
I need to pass the parameters to the 'Dunning Letter Print from Dunning Letter Generate' directly instead of passing to the spwaned program ''Dunning Letter Generate".
Thanks
Devender

Hi Gareth,
New parameters to be add are:
Tier : <xxxx>
Service Segment: <xxxxx>
Account Manager: <xxxx>
Location where I am picking these 3:
navigation:select any AR responsibility
customer->standard(query with any customer)->customer address
we have enabled 'site use information' dff in customer address window, from this dff we are taking these 3 parameters.
reason to add these 3 parameters:
we cant treat all the customers same. so we need to send some smooth(no harsh) dunning letters to some of our most trusted customers. so how can we identify gud customers in the list.
so we have enabled site use information dff. those customers who is have values for these 3 parameters. will be treated as v good and reguler customers for us. so for them we can send other dunning letters.
note*: this is to identify the customers like reguler customers,non requler customers.
bez in spwaned program we have parameters like 1.customer low 2.customer high. thats it .so it is very difficult to find out the nature of customer.
pls advice me on this..to proceed further..
Thanks
Devender

I can't print web pages since a recent upgrade to 4.01. The print command works but the page comes out empty. right now a copy the link to IE and print from there. HELP!

When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser.
I have to copy the link to IE (boo!) to print the coupon or page on my printer.
Why?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing

Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

How can I print from the icon in FF5?

I have been unable to print from any of the icons in FF5. This has only occurred in the past few days. The only way I can print is to "Select" on the page, and then "Print Selection" on the print screen. I can print from IE by using the icons.
This is also true with my Yahoo email.

In Mac OS X, right-clicking the document's icon brings up a similar menu, but documents are printed from the application, not from the OS. The application is launched, the document opened,and the document sent to the printer, bypassing only the Print dialogue.
The same route may be triggered by dragging and dropping the file's icon onto the printer's icon in the Dock.
Regards,
Barry

I can no longer print from a website. I can from other browsers but not Mozilla. Help

I used to be able to print any time I needed to. Then the print became so small I could not read it. Then the pages I printed from the website, printed blank pages. I contacted Thunderbird because this was first noted on email when I tried to print something from a website, they told me it was a Mozilla problem. So I then tried to print straight from the website and got the same thing. Nothing. The page is completely blank when printed.

These suggestions are not the problem and I have contacted HP and they have run all the diagnostics and they say the problem is not with the printer or the software. All other browsers print, just not Mozilla

MFP M127fn connected, test printing OK, can't print from applications

Hello Everyone!
I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6) can communicate with the printer and everything checks out OK.
Any suggestions?
Thanks in advance.

Hello!
I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
Please respond soon.__________________________________________
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-31-2015 08:06 AM
Hello again!
I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
Thanks,
Chris
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-28-2015 01:08 PM
Hi,
Thanks for getting back to me. I have tried a variety of different programs:
Mozilla Thinderbird (email) - no results
MS Word - no
ms excel - no
Finale (music software) - no
Adobe Reader - yes!
Google Chrome - yes!
NotePad - yes!
perplexing!

Can't print from iBook G4 via Windows XP to an HP PSC 1410

Hello,
I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
I cannot print from my iBook via XP to an HP PSC 1410.
I can print from my iBook via XP to an HP LaserJet 4L.
I was able to print from my iBook via XP to an HP882C that was connected
to the same USB port that the HP PSC 1410 is connected to now.
I have an iBook G4 running 10.4.3
I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
I installed the following from http://www.linuxprinting.org/macosx/hpijs/
hpijs-foomatic-2.02.ppc.dmg
espgs-7.07.1.ppc.dmg
HP-PSC_1400-hpijs.ppd
I think I correctly followed the instructions at:
http://www.ifelix.co.uk/tech/3015.html
They worked for the LaserJet printer.
When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
I don't need to be able to scan or check ink levels from the iBook.
I would just like to be able to do color printing.
What else should I try? Given the symptoms where might I be going wrong?
Any suggestions would be appreciated.
iBook G4 Mac OS X (10.4.3) 1 Gig RAM

I found the answer to this problem on Linux printing provided by Steve Stuart.
Dave
Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
Hi all,
I finally figured out what the issue was, Why it fixes it I can not say,
but it does.
On the Shared printer on the Windows side, go to the properties of the Printer.
Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
have it checked). Once this is done and you also do not have any firewalls
setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
able to print.
Finally!!!!! I hope this helps many many people. As I have had many
people asking for the solution if I found it.
Thanks,
Steven Stuart

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?

Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent

I am having trouble printing to an Epson XP600. It is a new printer and it has been replaced because we thought it was the printer. Basically, when I print from Excel, only color will print.

I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?

Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

How do I select a thick paper to print from Indesign?

How do I select a thick paper to print from Indesign? I have to go to the printer to select the thicker paper. I would like to select the paper from my computer in Indesign. Other programs allow this.

At the bottom of the print dialog box is a button labeled Printer. That will lead you to the printer-specific options like paper weight.

HP PhotoSmart 6520, Printer offline, Wireless printing from Windows 8.1 and others

My parents own an HP PhotoSmart 6520. They have 3 or 4 computers. 1 Is connected to this printer via USB cable. 3 Are "connected" over wireless. The printer has the latest firmware updates according to checks from the printer front display.
Problem is this:
1) When first starting the printer, and the printer gets on the wifi network, all wifi-available devices can print to it over wifi. We are also able to browse to the printer config web pages to see status, and change configs as needed.
2) After about 5 minutes of printer inactivity, all wireless clients can't print to the printer to print, and can't connect to the printer's web page. (The printer appears to be offline to each OS that uses WiFi to get Internet access.
3) If we visit the printer control screen, physically attached to the pinter, find the network configuration, and choose to "turn off" wifi at the printer, then after off, "turn on" wifi and see an IP address get assigned, then all WiFi machines can print to the printer over WiFi. However, after 5 minutes, again, the printer is offline. No matter what or how much each WiFi-based machine sends to their printer queue/spool, the printer remains offline.
4) If the USB-connected machine prints to the printer over USB, the printer once again becomes available over the wireless network.
The work-around is terrible. (Cycle WiFi access every time they need to print from Wireless devices.)
Things we have tried:
1) This is running the latest firmware according to the WebService section request to check for upgrades. They are on the latest according to the results. (no help)
2) DHCP was the initial config for network settings. I moved to a DHCP server configuration with static IP served by printer MAC address. (No help)
3) I switched to totally static IP address, thinking it might be a DHCP lease-time/renewal issue, or custom vendor string issues or bug. (no help)
4) Enabled/Disabled IPv6 even though they are on a NAT-ed network with only IPv4 support. (no help)
5) Visited printer config with web broswer, and change energy saver setting from "5 minutes" to "15 minutes" because the ~5 minute window seemed like an approximate time limit. (No help)
6) Enable/Disable other settings through the web and restart the printer. (No help.)
7) Suggestions listed here: http://support.hp.com/us-en/product/HP-Photosmart-6520-e-All-in-One-Printer-series/5169038/model/516... (No help)
In testing this, with static IP or not, from other machines, when we can print over WiFi to the printer, the IPv4 address is ping-able from peers on the network. After ~5 minutes pass, and the pinter goes "offline" there are no ping replies to the static or other IP address assigned to this printer. By all accounts, when the printer is "offline" it really is no longer on the WiFi network. Meanwhile, oter devices can ping each other. (All computers, smartphones, tablets, etc can all respond to ping.)
None of the other devices suffer from dropped access to the WiFi and Internet.
Suggestions?
I do not have access to this right now, but I can walk my parents through whatever steps are needed to resolve this.
Thanks!
P.S. Other things tried:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/If-your-printer-drops-off-your-network/...
1) When online, generating report, reports online
2) When offline, report reports that it is still associated with access point
3) Printer is about 2 feet away from the access point it is communicating with and has max-bars showing signal strength.
4) Channel allocation for WiFi was selected based on least used channel, and works very well for all other devices on this channel.
5) There is only one accesspoint with the name it associates with.
6) The only options for power-saving "auto-off" we see via web pages from printer are: 5 minutes, 10 minutes, and 15 minutes, and changing to 15 minutes does not allow the printer to remain online for 14 minutes -- it still goes offline to the network after ~5 minutes -- even agfter changing this settings and power cycling the printer.
7) No wireless extender is being used.
8) We tried static IP, Dynamic IP, and statically assigned DHCP served IP.
Once printer is "offline" when visiting printer to tell printer to disable WiFi access, then re-enable it, all machines with items in their printer queue/spool *immediately* de-queue/de-spool their printer jobs to the printer.
This is the closest description: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Photosmart-6520-goes-off-line/td-p/324... Where is that patch?

Hi @TheSynAck,
I see you are using a Hot Spot, I believe we have found the reason for the connectivity issues. There may be a setting that needs to manually configured for the Hotspot to 'allow' your printer access. Also, hotspots may have limitations and restrictions that may cause connectivity issues.
Take a look here: Setting up the Printer as a HotSpot, it shows a Laserjet but the same steps apply.
Keep in mind that Hotspot connections are 'best effort' connections due to the issues of inconsistencies within the connection. They are not routers. Therefore, you may experience issues in the future when using the Hotspot for your connection. Usually a powercycle or hard reset of the HotSpot will resolve such issues.
I would not recommend getting another Hot Spot as the connection is not guaranteed, you could however try a Wireless Router if you are looking to upgrade anyways.
With the PS 6520 you also have the ability to print using the HP Wireless Direct printing option. Please click on the link below to get started:
HP Wireless Printers - Printing with HP Wireless Direct
I hope this gives you a better understanding of the intermittent connection issues.
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

DotMatrix Printing from CR

Similar Messages

Maybe you are looking for