Dotted line around image frame in active state mode.

In my active state, I have the button set to open in a new window once it's clicked on, which it does. But when I go back to the page, there is a dotted line around the image frame that doesn't go away. Any help would be greatly appreciated!

Hi
I believe you are using Firefox to view the site, as this occurs only on firefox.
This is a known issue on their end as the selection for page object remains when we return to page.
The details can be found on this link :
https://developer.mozilla.org/en-US/docs/Tools/Page_Inspector
where it is mentioned that they would be taking this off from Firefox 29 onwards.
From Muse we cannot control this as its a browser specific selector function.
Thanks,
Sanjit

Similar Messages

When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie

Getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

Question
getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

/* stops annoying focus-selection boxes in FF3 */
*:active, object:focus, embed:focus
outline: none;
}

No dotted line around wrapper

I'm on only the 7th step of part II of "creating your first website" and already I've ran into problems. My wrapper has a solid line around it instead of a dotted line around the placeholder text. Afraid this will cause problems down the road even if I can still delete and put in the proper text. Using DW 2014 with PC. Need to find out quick so I can decide if this product is for me. Code below.
Thanks,
Howard
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>SRBC Pastor</title>
</head>
<body>
<div id="wrapper">Content for id "wrapper" Goes Here</div>
</body>
</html>

Duh!! That did it. Jeez, I was going nuts trying to figure that out.
Many Thanks,
Howard
In a message dated 10/31/2014 4:02:06 P.M. Central Daylight Time,
[email protected] writes:
no dotted line around wrapper
created by Jon Fritz II (https://forums.adobe.com/people/JonFritzII)
in Dreamweaver support forum - View the full discussion
(https://forums.adobe.com/message/6888227#6888227)

I am trying to draw a dotted line around a image through phtoshop CS5 sdk(64 bit)

the problem is that the dotted line is being created on my computer but it is not working on other computer ... when i checked on other system , it showed a error code on Play command .. i have windows 7 ( 64 bit ) and other system was also 64 bit ..
i have tried most of the things i know but the problem still persists. now i rely on you guys to get some advice and help ..
please help me
please send me code if you could create it
. thank you

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

Help!! White line around image with placed in Illustrator from Photoshop, possible CMYK issue?

I have a CMYK file, outlined product, that looks perfect in Photoshop. When I place the image into Illustrator, it shows up with a thin white line around parts of the product (fyi - it shows up on a print as well). I have tried to place an RGB file and it does not have the white line around the product. I assume it has something to do with it being CMYK, but I'm at a loss on how to fix this. I'm desperate for any help.

Okay, please refer this image and change the option within Ai General preferences. Uncheck the option Anti-Aliased artwork.

White line around image

Hi everyone,
I keep getting a white line appear around images I save in
Photoshop and then insert into Dreamweaver. It happens when I also
save text with a transparent background. The text has a very faint
white line around it. Why is this?

Where are you seeing this, in PS? or DW design view or in a
browser?
When you insert your pics in an HTML page with 0 border, do
you still see
the border?
This is not a graphics forum. Adobe has a PS forum at
http://www.adobeforums.com/cgi-bin/webx?14@@.3bbf2764
"dollecom" <[email protected]> wrote in
message
news:e5f6cq$fb7$[email protected]..
> Hi everyone,
>
> I keep getting a white line appear around images I save
in Photoshop. It
> happens when I also save text with a transparent
background. The text has
> a
> very faint white line around it. Why is this?
>

DW8-Fine white line around images

DW8 - On some of my images there is a very fine white line
around the edge when the site is previewed in the browser. The site
has an almost-black background color (181714), and I use the same
color in making the image backgrounds (in Photoshop CS), for
example roll-over images. How do I get rid of this?

You wouldn't set this in the Property inspector, you'd set it
in the CSS,
and the only time you need it would be when the image is
within a link:
a img { border:none; }
Also, you wouldn't expect this effect to produce a white
border - it would
be a blue one (by default).
I'm guessing the fine white line is part of the image (it's
easy to
undercrop when the canvas is white).
> I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
If you have nothing there, you will get the default value for
the all of the
table attributes, which is often (but not always) not zero.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Damaeus" <[email protected]> wrote in
message
news:[email protected]..
> Reading from news:macromedia.dreamweaver,
> "Fugasi" <[email protected]> posted:
>
>> DW8 - On some of my images there is a very fine
white line around the
>> edge when
>> the site is previewed in the browser. The site has
an almost-black
>> background
>> color (181714), and I use the same color in making
the image backgrounds
>> (in
>> Photoshop CS), for example roll-over images. How do
I get rid of this?
>
> Check to make sure that your image border is zero in the
Properties
> Inspector in Dreamweaver for the specific image in
question. I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
> I
> don't think I get a white border around images with
nothing in the image
> border width setting, but see if that works?
>
> Damaeus

Line around image

When I insert an image, it ends up with a faint line around it. I've tried using a .jpg and .png image and the same thing happens with both. Any ideas how I get rid of the line?

If you are using Image Field then you can make it readonly which will eliminate the highlighting to the field..
ImageField1.access = "readOnly";
You need to place the code in the Initialize event of the ImageField.
Thanks
Srini

Moving lines around images

Hello,
Does anyone know how to make a thick yellow line move around images? If I have two rectangular images on screen, and I want a yellow line to appear, run across the bottom of one, up the side of the next, then turn again and travel across the top of the second image. . . how best to do this in motion?
I was trying in FCP with a solid yellow screen, cropped into a line, then key-framed to move. But someone suggested it'd be easier in Motion, so I thought I'd investigate. I'm not really great in Motion, but I can do some basic stuff. Any suggestions would be appreciated.
Lawrence

Dunno if this is exactly what you're looking for, but it took me less than five minutes in Motion.
Line Draw Movie
I used an open shape to make my line, with the stroke of type: Image. Put a yellow rectangle into the image well, set the draw on and off, and bingo.
Here's my example project.
Patrick

Boundary line around image.

Hello
Does anyone know if it is possible to make a boundary line all the way around the outside of a design
? I know this is possible in CorelDraw. I have tried Offset path in ai, but it seems to offset all lines, including the internal lines inside a design.
I would like to produce a closed boundary line around the design, which could be used as a cutting line for laser cutting of the whole design as one piece..
Thanks for any help.
Regards.

Your link isn't attaching, but I think I know what you're looking for.
Group everything you want outlined, select the group, open your appearance panel (if it isn't already) and from the flyout menu "Add New Stroke"
You can then select that stroke by clicking on it in the appearance panel and apply an offset (or any other effect or effects) to it. If you want it offset, you'll also have to effect -> pathfinder -> add it, to make it all one shape instead of outlines of all the components.
Note that for this method, the offset command needs to be Effect -> Path -> Offset Path, not the one under the object menu.
Depending on how your laser software works, you may need to Object -> Expand Appearance to "render" it out as it's own separate object.
More info on the awesome power of the appearance panel here, here and here.

The logos on some of my bookmarks are now blank squares witha dotted line around them

I updated Firefox and now the logos on some of my bookmarks and tabs are blank, dotted line squares.

If you go to the site, do they actually have a favicon, or did you create them in you bookmarks with the help of an extension because you didn't like non descriptive bookmark icons and folder icons.
Did you lose them in the bookmarks sidebar("Ctrl+B")
On the toolbar for the Bookmarks toolbar, I display only text and try to key most of them to 1-2 letters (or 1 non-letter character) for those that appear directly on the toolbar. Most are in folders there.
* Bookmarks Toolbar Blue/Folders, Red/Bookmarks - Themes and Skins for Browser
*:http://userstyles.org/styles/9091
I had just answered this elsewhere 1/2 hour ago but couldn't find it.
The was another answer there that suggested to Restart Firefox, good but you had them for a long time so I hadn't mentioned it.
You basically have to use them again sometimes, but I've not seen them disappear. Since they are stored both as a bitmap and reference to the web page favicon it seems that they would not be deleted.
I don't really have total recall that I could remember exact working and retype consistently -- but I do have and extension to help me when this site drops what I typed if I go to another page using same tab and come back. I could have searched on content or title (or mess it up again trying and restore like I just did again for the second time).
Textarea Cache :: Add-ons for Firefox
*:https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

Lines around image with drop shadow

Hello,
I am currently using Illustrator CS 5.1 and am having an issue with my PDF files. I have a graphic that I am building and when I import an image, place a clipping mask around it and then add a drop shadow to it, everything works fine and looks exactly as I want it on screen. However, when I save the document as a pdf, a hazy white line appears around the edges of the image. However, the line is not on the clipping mask itself, instead it is on the square edges of the unmasked version of the image. So when I have 10 masked items on the page with drop shadows, I'm getting 10 faint white squares around each of the images which looks terrible. Has anyone else experienced this? Any recommendations/solutions?
Thanks in advance!
Wil

Also change your acrobat settings to show overprint preview always.
If this comes back in Illustrator PDFs, Print >> Advanced >> Slide tranparency flattener to raster >> done , then save.

Creating PDF from PowerPoint results in lines around images

I've researched this topic on the forums and have seen some related posts but none that directly hit the issue I'm having. Have a PP file with some images and when I create PDF, the resulting file shows random "outline" lines partially around some of the images. These lines do not show up when printing. They go away if I uncheck the "Smooth Images" box under Edit/Preferences/Page Display. However, unchecking the box degrades the image quality and requires the viewer to make this change in his version of Reader. This PDF will be viewed typically on a screen rather than via print and I can't rely on the user to do the Smooth Images change. I have spent lots of hours trying various potential fixes (differing file types, etc.) but can't figure it out and haven't been able to find a solution anywhere on the web. Anyone up for the challenge of helping me figure it out?

Any chance you can post a link to the file or PDF page?

Thin white line around image

Using CS3 with Vista. I have a postcard that has a background image on the bottom layer, another (overlapping) image in the next layer, and type on the top layer. The image on the middle layer is showing very minor white edges (stitching (?) I guess) around parts of it. It also printed with this same slight, white jagged edge. This middle image has an effective resolution of 300 ppi. I read in Knowledgebase about turning off anti-aliasing but when I do it still shows this white edge on screen and the type seems to marginally get slightly jagged. It was so minor that the client was fine with it but I am curious as to what was causing it and if it's something I can remedy in the future.
Any thoughts would be appreciated. Thanks.
Gordon

Gordon has sent me his original files, and there are a couple of issues.
The first is with the background image, a 400 x 400 pixel jpeg that's been stretched to fit the rectangular sahpe, and then made 50% opaque. The effective resolution is 97 x 60 ppi, which as a ghosted background is probably marginally usable, particularly if printed on digital equipment, but is hardly optimal. I'd personally do the opacity reduction in Photoshop and save a new flattened version as a .psd for use in a background because it reduces the complexity of the file, but there's no rule that says one must do things that way. I simply prefer to use transparency only when it is required to achieve the effect.
The larger issue is with the middle image, which is a transparent .gif of a glass with a margarita. This is 1238 x 1667 pixels and has an effective resolution of 349 ppi, more than adequate for print, but it looks to me as if it was up-sampled at some point from a web image (not unlikely since it's a .gif) as the image is made of obvious square blocks that look like the original index color pixels -- a classic example of why you can't simply take a small image and upsample for print. Around the stem of the glass are a large number of white pixels left behind when the image was removed from its original background, which are showing as the faint white lines he described. These pixels could be removed using a detect edges clipping path in ID, but doing so leaves a very jagged edge. A drawn path in Photoshop is much cleaner, but the pixels in the rest of the image are still readily apparent and the image probably isn't really worth the effort to repair if a better quality can be found to begin with.

Dotted line around image frame in active state mode.

Similar Messages

Maybe you are looking for