Double account listing with differing authentication

Greetings!
For a few weeks I have been having problems sending my mail. Finally had the time sit sit down and check out what was going on. I had an old account for mobile me which could (obviously) not connect and deleted it. But that was not the problem.
My mail connection doctor lists 2 account with the name iCloud...
Double clicking on the first gives me the account tab of the preference of mail. Authentication is set to "password"
Double clicking on the second gives me the account tab of the preference of mail with a dropdown menu showing "description" "Server Name" "in use by account" and under that, Account Information / Advanced.
AND authentication. If I set authentication to password (with the proper entries), I get no connection. If I set this second listing to authentication = none, I can send mail...
Why is this so?
1) is it ok to leave authentication = none?
2) do I have to remove one of the account listings?
3) Am I worrying about nothing important...?
Thanks,
JB

Hi JB,
Try this...
Mail Preferences>Accounts>Account Information>Outgoing Mail Server (SMTP):click on that & choose Edit Server List, highlight the old one & click Remove Server.
Did you setup the new iCloud account like this?
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Similar Messages

Creating a list with different row sizes...

I'm new to AS 3.0 and CS4 and I've been getting up to speed
on all of it. I've used the List component before with my own
CellRenderer. I now need to create a list with different row
heights. The List component is great and does everything that I
want but it requires all rows to be the same height.
I'm unsure of where to go. Creating my own class seems like a
lot of work. The TileList and Grid components don't allow different
sized (and dynamically changing) row heights either. Is there some
base class (SelectableList? BaseScrollPane?) that I should extend
or do I need to just bite the bullet and write it all from scratch?
I need each row to have it's own height and interaction with
a row could change the height of the row. The main use is a list of
data. If the user clicks in an item, it turns the display into
something they can edit (which will need more height).
Thanks for any thoughts on a direction I should think about.
By the way, I really like that AS 3.0 is much more consistent of a
programming language than previous MX versions that I've used.
We're doing a lot of AS/Flash/AIR work with it and it's turning
into a wonderful environment...

Any ideas about this??

[svn:bz-trunk] 18926: bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError

Revision: 18926
Revision: 18926
Author:   [email protected]
Date:     2010-12-01 14:07:19 -0800 (Wed, 01 Dec 2010)
Log Message:
bug fix BLZ-570 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError
We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml.
This needs documentation.
Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AmfIO.java

[svn:bz-4.0.0_fixes] 20451: backporting bug fix BLZ-570/ BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError .

Revision: 20451
Revision: 20451
Author:   [email protected]
Date:     2011-02-24 08:33:31 -0800 (Thu, 24 Feb 2011)
Log Message:
backporting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
    http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/common/src/flex/messaging/errors.properties
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.j ava
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/Amf3Input.java
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

[svn:bz-3.x] 20443: back porting bug fix BLZ-570/ BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError .

Revision: 20443
Revision: 20443
Author:   [email protected]
Date:     2011-02-23 21:19:22 -0800 (Wed, 23 Feb 2011)
Log Message:
back porting bug fix BLZ-570/BLZ-620 Double linked list with lot of objects result in BlazeDS Error deserializing error : StackOverflowError We put hard limit to the max object nest level to prevent StackOverFlowError. the default max object nest level is 1024 and it can be configured in the endpoint/serialziation section in service-config.xml. This needs documentation. Checkintests pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-570
    http://bugs.adobe.com/jira/browse/BLZ-620
Modified Paths:
    blazeds/branches/3.x/modules/common/src/java/flex/messaging/errors.properties
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf0Input.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/Amf3Input.java
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/io/amf/AmfIO.java

IHC Cash concentration Account Hierarchy with different currencies - F9H1

Hello Experts,
Can someone please help me find out if it In Tcode: F9H1/F9H2, it is possible to create an account hierarchy with sub account in different currency than the Root account?
I am getting the following error when I try to create an account hierarchy with different currencies in root account(USD account) and subaccount(GBP account)
"Account XXXXGBPYYYY / GBP cannot be inserted; Currency not possible"
Is this a system limitation or are we missing some configuration?
Please advice

Hi Anya,
In the new version of IHC, which is available from EA-FINSERV 500 onwards, the cash concentration process generates 2 payment orders -
1. BCA payment order ( or the OLD IHC payment order - can be viewed via F9I3)
2. IHC payment order (or the payment order created in the new version - can be viewed via IHC0)
This happens only when you configure the module IHC_BCA_EXTERNAL_PAYMENT in the BTE 10310 for application IHC.
This would then call the new version of IHC and post a payment order which you can view from tcode IHC0.
If instead of module IHC_BCA_EXTERNAL_PAYMENT, another module PAYMENT_EXTERN_IHC is configured in the BTE 10310 then it would look for an entry in the table TBKKIHB4 to create a PAYRQ (treated as external payment). And, on finding the table empty, it throws the error message as mentioned by you.
Hope this helps!
Best regards,
Sidhartha

How to show the contents of a dropdown list with different colors

Hi,
I have a drop downlist on my dialog. I want to show each of its text attribute and its back ground with different color.
Suppose I am showing 4 strings in the dropdown like Name1, Name2, Name3 and Name4, then how to change the color of each name and its background.
Please let me know if it is possible.

If the above asked is not possibe can we have an alternative as mentioned below :-
A dropdown similar to the one shown in "Edit->Preferences->Grids->Colors" having our own text names instead of the default color names.
So that I can show some color symbol and a text name along with it in my dropdown.
One more query, is it possible to show the images/giff/png files in dropdown ?

GL Accounts Planning with different value in each period through SPL ledger

Can any one help me for the below issue:
We want to load ( EXCEL SHEET) planning amount through special purpose ledger against each GL account or all P&L and Balance sheet accounts, perhaps, a different value in each period.We would want to compare actual and budget figures by using T-CODE F.01.
The example Given below:
GL - 250112
PERIOD 1 - 10,000
PERIOD 2 - 10,500
Pd3           - 10,500
Pd4           - 8500
Pd5           - 8000
Pd6           - 9500
Pd7           - 10000
Pd8           - 9400
Pd9            - 10500
Pd10          - 11000
Pd11          - 6000
PERIOD 12 - 8400
Can anyone give me step by step procedure to do this.Thanks in advance.
Edited by: DhanuSAPFICO on Dec 28, 2010 5:52 PM

Hi,
A bit not clear requirements. You are trying to create separate accounts for Opening and Closing? Looks strange! Please, use Flow dimension for this things. Trying to emulate it on the report level will create a lot of misunderstanding...
B.R. Vadim

NetBeans acting weird; A list with different components

Hi,
I'm writing an application that is using swing components and have some questions (my IDE is NetBeans 6.1):
1. I have some forms with JTextFields, JButtons and JLabels. I have a very annoying problem in the NetBeans, that sometimes if I change the location of one of the components in the form (in the design view), for example a JTextField, the entire form changes its look - buttons are moving, labels are dissappearing etc.
Why is that? Is it a bug in the IDE?
2. I have written kind of a IM application and I have a list of users, some are online and some are offline.
I want the list to show me the online users in a different way that the offline users (for example - online users are colored in green and offline users are in red, or maybe a small icon next to the user's name).
How can I do it? At the moment I'm using a JList (and don't distinguish visually between offline and online users).
Thanks a lot!

You may get a decent answer here, but odds are that you will have better luck if you post this in some netbeans forum or mail list.
Oh, and I doubt that you've run into a NetBeans bug. The relative probability of you finding something that the creators have not vs you simply not using it correctly are orders of magnitude apart. This is not to insult you, as if I were in a similar situation, the odds would be the same for me. I know that I'm not anywhere near as smart as the creators of this complex app.

Exchange 2013, multiple IIS OWA sites with different authentication

Hi
I have an exchange 2013 server with Client Access and Mailbox server installed. The server has an second ip address which I have bound an additional IIS site to. The additional IIS site is named ExchangeExternalFBA.
The default web site is configured for basic and windows authentication with:
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
Then a new ECP and OWA are configured with:
New-ecpVirtualDirectory -WebSiteName "ExchangeExternalFBA"
New-OwaVirtualDirectory -WebSiteName "ExchangeExternalFBA"
Set-owavirtualdirectory -identity "owa (ExchangeExternalFBA)" -LogonFormat FullDomain -FormsAuthentication:$true -WindowsAuthentication:$false -BasicAuthentication:$true
Set-EcpVirtualDirectory -identity "ecp (ExchangeExternalFBA)" -FormsAuthentication:$true
Then I perform an iisreset.
My problem is that then when I try to access the ECP or OWA on the default website, it loads forms authentication! The ECP or OWA on the ExchangeExternalFBA web site works correctly and also loads forms authentication.
If I run...
get-owavirtualdirectory "owa (ExchangeExternalFBA)"
then it returns:
InternalAuthenticationMethods : {Basic, Ntlm,
WindowsIntegrated}
BasicAuthentication : True
WindowsAuthentication : True
DigestAuthentication : False
FormsAuthentication : False
LiveIdAuthentication : False
AdfsAuthentication : False
OAuthAuthentication : False
If I then run
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
and perform another iisreset then when I try to access the ECP or OWA on the default website it loads correctly. But then the forms based authentication on the ExchangeExternalFBA website can no longer log in, it does not accept the user name and password.
If I then disable and enable FBA on the ExchangeExternalFBA website then it works but forms based authentication takes over the default web site again!
Whether I perform the above from the gui or from powershell it does not make a difference, the same behaviour is observed. Changing the logontype on the FBA does not make a difference.
This has been tested on exchange 2013 cu1 and cu2.
Similar(if not identical until they get sidetracked) issue reported in http://social.technet.microsoft.com/Forums/exchange/en-US/9fcd360f-6658-4940-add7-2f13265cf86b/multiple-owa-sites-on-a-single-server-2012-with-exchange-2013-mailbox-cas.
This worked fine in outlook 2007 and 2010, why now do my virtual directories break each other?
I can reproduce the issue on a test exchange 2013 I built in dev.
Is this a bug or are you no longer meant to host different forms of authentication on a single cas?
I'm mostly interested to see if this works for other people and why it no longer seems to work in 2013, so please no questions; 'why do you want 2 different forms of authentication'.
Much appreciated, Thanks!

Based off of your feedback I have run the following:
Remove-OwaVirtualDirectory "owa (ExchangeExternalFBA)"
Remove-EcpVirtualDirectory "ecp (ExchangeExternalFBA)"
iisreset
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
New-ecpVirtualDirectory -WebSiteName "ExchangeExternalFBA" -Role ClientAccess
New-OwaVirtualDirectory -WebSiteName "ExchangeExternalFBA" -Role ClientAccess
Set-owavirtualdirectory -identity "owa (ExchangeExternalFBA)" -LogonFormat FullDomain -FormsAuthentication:$true -WindowsAuthentication:$false -BasicAuthentication:$true
Set-EcpVirtualDirectory -identity "ecp (ExchangeExternalFBA)" -FormsAuthentication:$true
iisreset
After this there has been no change in behaviour. After the iisreset, forms have again hijacked the default web site and re-setting the authentication on the default web site removes the forms but breaks the ability to sign in to the forms based page on the
ExchangeExternalFBA web site again.
Note. '-Role Frontend' did not work. It showed the error:
Cannot process argument transformation on parameter 'Role'. Cannot convertvalue "frontend" to type
"Microsoft.Exchange.Management.SystemConfigurationTasks.VirtualDirectoryRole".
Error: "Unable to match the identifier name frontend to a valid enumerator name. Specify one of the following enumerator names and try again:
ClientAccess, Mailbox"
+ CategoryInfo : InvalidData: (:) [New-OwaVirtualDirectory], ParameterBindin...mationException
+ FullyQualifiedErrorId : ParameterArgumentTransformationError,New-OwaVirtualDirectory
Running get-help New-OwaVirtualDirectory -detailed shows the correct usage would be '-Role ClientAccess'?
-Role <ClientAccess | Mailbox>
The Role parameter specifies the configuration that should be used
when the virtual directory is created. The following are the values
that can be used with this parameter:
* FrontEnd Configures the virtual directory for use on a Client Access
server.
* BackEnd Configures the virtual directory for use on a Mailbox server.

Although I can receive mail on my btinternet address I cannot reply or send. My settings , apart from user name are extactly the same as my wife's who has no problem. We are the same account but with different user names and passwords.

Settings use mail.btinternet.com as smtp, SsL is on, port 995

Hello Bigstorr,
It sounds like you are not able to send emails from your iPad. I found a couple of resources that address issues with email on the iPad:
Setting up and troubleshooting Mail
https://www.apple.com/support/ipad/assistant/mail/
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to get Network logins shown as a list with photos!

A long time ago, some one posted a tip here on how to set this up for Panther Server (that is to be able to view the list of network login accounts as a scrolling list with different pictures [photos] for each user).
I myself was able to follow the instructions and get it working in Panther.
Later someone else said it no longer worked using Tiger Server.
A while I go I did set this up (again) using Tiger Server and therefore I can confirm it does still work. (Although I am only now getting round to letting anyone else know.)
If anyone is interested I can help you through the process.
In theory the same pictures can be used in other places as well, for example in Apple AddressBook (works for me as well). Its a shame Apple broke MailPictures in Tiger though. See http://www.nikwest.de/Software/
Despite what the above website implies, it DOES NOT work properly in Mail in Tiger (although the Panther version does work in Panther Client).
PS. I did get an equivalent to work in Mozilla Thunderbird 1.5 in Tiger.

Unfortunately it doesn't work. @List requires members names so I can't provide a member set as an argument :(^^^Are you sure? Take a look at the below example from the Tech Ref. That sure looks like @LANCESTORS and @LIST is accepting more than just member names.
FIX(@LANCESTORS(@LIST(@ATTRIBUTE(Caffeinated_True),@ATTRIBUTE(Ounces_12),"200-40")))Also note this:
If the @LANCESTORS function is used alone (not within a FIX statement), you must use the @LIST function and specify member names. So you DO have to use @LIST if @LANCESTORS is to be used to do an aggregation. Or so it appears.
Regards,
Cameron Lackpour

Invoice report with different currencies

Dear friends,
I need a report for invoices. I want to choose currency from selection screen. And report will calculate invoice amount with this currency. Does SAP have a standard report for this?
How can I see invoice list with different currency?
Thanks

Thanks for your interest. But I am looking for invoce report. For example I have 3 PO
PO number      Currency      Amount
121100                EUR             100
121101                TRY              200
121102                USD              300
I want to see a invoice list like below
Selection screen :
Report Currency : USD
When I execute I want to see report like
PO number      D.Currency      Amount          Report Currency (I choose USD and amount will exchange to USD)
121100                EUR             100                       68
121101                TRY              200                      150
121102                USD              300                      300
Is it possible?

Somehow my MacBookPro iCloud account has a different name and password from my other devices. Even my date of birth is listed incorrectly. I have tried but can't seem to change this info to match up with my other devices. Can someone help?

Somehow my MacBookPro iCloud account has a different name and password from my other devices. Even my date of birth is listed incorrectly. I have tried but can't seem to change this info to match up with my other devices. Can someone help?

Thanks
I have a PC (Windows 7)
Not sure when mobile me changed, but it was this weekend that my storage etc. lapsed (I have paid to keep storage with icloud). So i assume this has something to with it stopping.

Can you have 2 ipods on the same accounts with different play list?

Can I have 2 ipods on the same accounts with different plalists?

Sure. Each iPod is identified in iTunes with its own name and you configure each one as you wish:

Double account listing with differing authentication

Similar Messages

Maybe you are looking for