Double Artists and not updating

I have a iPod Touch 1st generation, I am using ISO 1.1.5 and ITunes 10.6 current version, on my music-artists, showing few doubles, I deleted them and re-added by folder and by file, I used the editor on ITunes as well. Still I cant get it to consolidate under one artist showing albums, names, music information is correct, no miss spelling, and they all have album art added. I am stumped any ideals please!!!!! Also when i check update and ITunes is set on automatic my version ISO 1.1.5 show is current and no updates any ideal??? Please help. my email is [email protected], Thanks!

Okay, is all the software up to date?
iPod Updater
iTunes
Also, go to settings-->about on the iPod. What is the software version?
In additon to that, try a reset...
Resetting iPod is it appears frozen or doesn't respond
Post back if it still doesn't work. I have a few more ideas
btabz

Similar Messages

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?

Fix iPhone Apps Stuck "Waiting" During Installation

Podcasts episodes not visible and not updated

Since 2 weeks I have noticed that in iTunes for Windows new postcasts episodes are no longer visible in the Postcast section. The result is that as no updates are shown (also not after using the refresh option) the new episodes are not downloaded either.
The strange thing is that when I look in the iTunes Store or create a Smart playlist with Grouping set to Podcast the episodes are visible.
Any suggestions why the episodes are not visible and not updated?
Thanks.

Does this fit your situation? iTunes will stop updating a podcast subscription if you have more than five episodes downloaded but not listened to, as detailed in this page:
http://support.apple.com/kb/TA23353
which states:
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.

Mac time freezes and not updating

After upgrading to osx yosemeti the mac time freezes frequently and not updating...I have to manually everytime to see the current time..

System Preferences/Date & Time/Date & Time - is it set to Set date and Time automatically? If so, try the following.
Do a backup.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

How to recover my iPhone 6 from disabled without losing my data as the backup in my iTunes is old and not updated.

Hi,
I have iPhone 6 and the after the screen has broken the phone was starting to enter random passcode from itself until its locked and disabled. I have replaced the screen with a new one and I need to make a backup of my data in the phone and not reset or restore from the phone backup in my iTunes as it's old and not updated. Kindly advise me how to make this task as I have important data I need to not lose.
Best regards,
Mohammad Al-Nafisi
[email protected]
Mobile Phone: +966552034444

You cannot now. The only way to reset the passcode and remove the disabled status is to restore the device. There is no way to make a new backup now. That is actually the whole point of the passcode attempt limitation and the disabling of the device - to keep someone without the passcode from getting at your data. Once disabled, your sole single recourse is to restore it in order to be able to do anything with it.
At this point you can restore from your existing backup, or as new. Either way, you've already lost the current data on the device.

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Hey, thanks for replying. It is the user who needs to manually submit the page.
Basically our page has a hidden div with various text fields and combo boxes. When the user click on specific links on the page, this div is populated and made visible to the user in server side code.
What happens for all other browsers other than firefox 23 onwards (worked fine in 22) is that after the user clicks on the link, our server side code is executed via a HTTP post. The server then renders the hidden div and sends the additional HTML down to the browser via ASP.NET AJAX.
With Firefox 23, the additional HTML is not rendered on the first postback. Subsequent clicks of the same link execute the same server side code but the additional HTML is rendered on the browser without issue.
We've done a lot of debugging now and the issue is localised to a specific third party supplier's (Infragistics) control. I think Firefox 23 must have changed the way that the viewport or screen bounds are calculated or reflected back to this control as the issue seems to stop when we remove the control's MaintainPositionOnScroll attribute. It might be that the Firefox 23 DOM is not able to provide the screen dimensions accurately when the page is first rendered. I say this as the second postback renders the additional HTML fine.
The control in question is quite an old version so I don't think it's your issue to be honest.
Just so that this might be helpful to other developers using the Infragistics Window Dialog Control, setting MaintainPositionOnScroll to false solved this issue for us.

Apps stock and not updating

Hi,
For the past 10 days more than 5 apps on my iPhone and iPad are stuck and not updating. Can anyone help please.

1. Check iTunes and see if you have a pending/stalled download e.g. Podcast, Books, Music, Movies or iTune U. Finish off the download and you should be able to update.
2. Connect to iTune; and Check for available download (under Store). When download is completed, sync to iPad.
http://i1224.photobucket.com/albums/ee374/Diavonex/f5c1b271.jpg

ITunes showing error 29 and not updating iOS help me please

iphone 4s showing apple symbol so i tried to connect to itunes .iTunestrying to update but later showing error 29 and not updating iOS help me please.

Read this - it should help
http://support.apple.com/kb/TS5254?viewlocale=en_US

When I try to edit my payment method it keeps saving the old card and not updating to the new one?

When I try to edit my payment method it keeps saving the old card and not updating to the new one?

You likely need to change the default application(s) assigned for opening files to point to the new ones. HOw you do that depends on which operating system you have. If you search Google you should be able to find out how to change the default programs for different files.

Game center bugs, lockups and not updating friend details

With the new ios7 game center I have found a couple of issues.
Firstly, it does not seem to update the name of my friends when they chnage theirs. It keeps showing their old name. Why is it not updating the credentials?
Even more seriously, there are 2 ways of getting the application stuck, at least on the ipad. The iphone seems not to suffer from the automatic jumping described below.
At the bottom, select the "Friends" tab. Select the "Points" view, which includes yourself (Me) in the list of friends,
Select yourself (Me) in that list, and you'll notice the app will jump back to the first tab "Me".
Try to move back to the Friends tab, it will immedeately jump back to the "Me" tab. You'll have to kill the app to see your friends again.
Similar method, but worse: At the bottom, select the "Friends" tab. Select the "Points" view, which includes yourself (Me) in the list of friends,
Don't select anyone yet but move to the "Games" tab and then back to the "Friends" tab. This will autoselect the player "Me" and you'll notice the tab also jumps to "Me" but the "Friends" tab view stays, and actually the whole app is now stuck.

4.1 launches this week, it addresses the 3G slowness.
http://news.softpedia.com/news/Confirmed-iOS-4-1-Resolves-Slow-iPhone-3G-Perform ance-Out-September-8-155069.shtml

Cd jewel inserts not printing correctly-come out with only song name not artist and not in landscape form-hl

cd jewel inserts not printing correctly-only shows song title not artist and printing in portrait form where landscape form is required-pls help!

iTunes CD printing has been broken for several releases now. Some people have had success by directing the iTunes print output to a PDF file, and then printing the PDF.

Changing ID3 Tags and not updating in ipod?

copyed some mp3 to the ipod, disconnected,
now tryed to update artist name and album in itunes,connected the ipod again and the old info is staying in the ipod, not the new tags..
tnx

IF you wnat o manually sync, there are not other options. Drag teh new songs to the iPod.
If you want to manage what goes onto the iPod, you can autosync only selected playlists instead of putting everything in iTunes onto the iPod.
Create playlist(s) with what you want on the iPod.
Select the iPod.
Uncheck *Manually manage music*.
Click the Music tab.
Tick *Sync Music* and tick *Selected playlists*.
Tick the playlist you want on the iPod.
Add/remove from these playslist to control what goes onto the iPod.

Sorting by artist does not update (iTunes 11 only)

I never should have updated to iTunes 11. I've had nothing but headaches since I dropped 10. Most of them are bearable, but one has me completely boggled.
When I did the update, iTunes tried to outsmart me and played around with my Artist info on some of the tracks where I'd changed that field. I don't know why it did that since I'd changed the field on purpose to make sorting easier, but whatever.
The problem is that when I go back into the track's info (using iTunes' "Get Info" or just by editing the field directly in the grid view), iTunes steadfastly refuses to re-sort based on the new value.
For example, I've purchased the Sweeney Todd soundtrack. One of the tracks, "Pretty Women" originally listed "Alan Rickman & Johnny Depp" as the artist. While this is kind of sort of correct (they're just performers, not the artist) it at least put the track in the appropriate place when sorted by artist - midway through the "A"s.
When I go in and change the artist to Stephen Sondheim (who actually wrote the bloody thing), the Artist value does change, but no matter how many times I re-sort by artist, the track still sits in the middle of the "A"s. I've restarted iTunes, restarted my computer, synced with my iPod, everything I can think of, and that track (and any other track I change the artist on) still sits there smilling and thinking that it still says "Alan".
Has anyone else seen this happen and (more importantly) has anyone found something approaching an answer?
Thanks!

Of course by posting the question I was destined to stuble on the answer. Get Info, Sorting, and update the Sorting Artist field. Please raise your hand if you think this is a mind-numbingly Microsoftian thing to put into an Apple product. Now I'm going to need to go through my entire bloody library removing the "Sorting" fields just so I can get iTunes to remember the alphabet. Why not sort by what it says in the matrix by default? *facepalm* Jobs would be ******.

SQL Server 2008 R2 Replication - not applying snapshot and not updating all repliacted columns

We are using transactional replicating on SQL Server 2008 R2 (SP1) using a remote distributor. We are replicating from BaanLN, which is an ERP application to up to 5 subscribers, all using push publications.
Tables can range from a couple million rows to 12 million rows and 100's of GBs in size.
And it's due to the size of the tables that it was designed with a one publisher to one table architecture.
Until recently it has been working very smooth (last four years)) but we have come across two issues I have never encountered.
While this has happen a half dozen times before, it last occurred a couple weeks ago when I was adding three new publications, again a one table per publication architecture.
We use standard SS repl proc calls to create the publications, which have been successful for years.
On this occasion replication created the three publications, assigned the subscribers and even generated the new snapshot for all three new publications.
However, while it appeared that replication had created all the publications correctly from end to end, it actually only applied one of the three snapshot and created the new table on both of the new subscribers (two on each of the
publications). It only applied the snapshot to one of the two subscribers for the second publications, and did not apply to any on the third.
I let it run for three hours to see if it was a back log issue.
Replication was showing commands coming across when looking at the sync verification at the publisher and
it would even successfully pass a tracer token through each of the three new publications, despite there not being tables on either subscriber on one of the publishers and missing on one of the subscribers on another.
I ended up attempting to reinitialize roughly a dozen times, spanning a day, and one of the two remaining publications was correctly reinitialized and the snapshot applied, but the second of the two (failed) again had the same mysterious result, and
again looked like it was successful based on all the monitoring.
So I kept reinitializing the last and after multiple attempts spanning a day, it too finally was built correctly.
Now the story only get a little stranger. We just found out yesterday that on Friday the 17th
at 7:45, the approximate time started the aforementioned deployment of the three new publications,
we also had three transaction from a stable and vetted publication send over all changes except for a single status column.
This publication has 12 million rows and is very active, with thousands of changes daily.
, The three rows did not replicate a status change from a 5 to a 6.
We verified that the status was in fact 6 on the publisher, and
5 on both subscribers, yet no messages or errors. All the other rows successfully updated.
We fixed it by updating the publication from 6 back to 5 then back to 6 again on those specific rows and it worked.
The CPU is low and overall latency is minimal on the distributor.
From all accounts the replication is stable and smooth, but very busy.
The issues above have only recently started. I am not sure where to look for a problem, and to that end, a solution.

I suspect the problem with the new publication/subscriptions not initializing may have been a result of timeouts but it is hard to say for sure. The fact that it eventually succeeded after multiple attempts leads me to believe this. If this happens
again, enable verbose agent logging for the Distribution Agent to see if you are getting query timeouts. Add the parameters
-OutputVerboseLevel 2 -Output C:\TEMP\DistributionAgent.log to the Distribution Agent Run Agent job step, rerun the agent, and collect the log.
If you are getting query timeouts, try increasing the Distribution Agent -QueryTimeOut parameter. The default is 1800 seconds. Try bumping this up to 3600 seconds.
Regarding the three transactions not replicating, inspect MSrepl_errors in the distribution database for the time these transactions occurred and see if any errors occurred.
Brandon Williams (blog |
linkedin)

Double Artists and not updating

Similar Messages

Maybe you are looking for