Double Boxes and OTS Boxes

Is it possible to do a double box effect or an over the shoulder box effect like you see in newscasts? I know normally this is done live usually but I was curious if this is possible in post

Of course it's possible. And I suppose you expect me to tell you how, rather than reading the manual.
It is as simple as putting another video layer in your timeline, adding the footage you want in the box and then scaling and positioning it. Put a border around it.
It's all in the manuals in excruciating detail.
Hint: after adding the video to layer two, double click it to open in the viewer, open the motion tab, and have at it.

Similar Messages

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

Highlite the text inside the text box and then press Ctrl+E.

Deleted messages from in box and sent box do not appear in trash

For years deleted messages from my in box and sent box appeared in the trash where I would hold them for a week or two just in case I had to retrieve a message I had deleted. About 6 months ago deleted messages stopped showing up in the trash. What do I do to get deleted messages to once again appear in the trash? I'm no computer geek... please be gentle with any suggestions. Thank You.
Ron Mabey

While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox. I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field. I'm also finding some unread mail there that should be in the "Junk" mailbox. So it would appear there are many problems with ISO 7 and mail. I have tried deleting and restablishing the account and two complete iPhone restores. Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well. Has anyone found a solution to any mail problems on ISO 7 devices? If so, please reply.

Creating List box and check box in structure

Hi
I have to include List box(Drop down) of lenght 20 and check box in a screen area.
The fields on screen are to be transported from structure CI_PROJ in table PROJ.
How can i Include List box and check box in my structure CI_PROJ.
Also wat data type is required

Hi,
For the list box if you have the data element along with the search help then you can use that dataelement. If you dont have search help at dataelement level then for the structure you have to assign a search help directly. If you dont have data element it self then domain's fixed values will be shown in the drop down. For the check box you have to use a data element with a domain having CHAR and length 1.
For the list box you will KEY and VALUES. Key is the one that is transfered to your program data and VALUE is the one that is shown to the user. You have to use the data element of your KEY for the list box.
Regards,
Sesh

Removing Music Box and Video Box Queue from Safari Window tab

Hi,
I had earlier installed two applications : Music Box and Video Box.
Since I don't use them often I removed them from my Macbook.
But after removing these applications, I noticed two of these Annoying options
on Safari > Window tab (toolbar).
Any ideas of removing them ? Altough they don't affect my system; it really isn't nice to see them
there as the applications itself is gone.
Thanks.

Did those applications come with an uninstaller? If so, did you use it to uninstall the apps?
If you did, please let the developer know that their uninstaller didn't work.
If they didn't provide an uninstaller, send a nasty-gram asking them to please do in the future.
I'm not familiar with those programs and don't know where something might install in order to alter the app like that except the Safari Extensions which you can access from the Safari Preferences.

Removing Music Box and Video Box Queue from Safari (Window) toolbar

Hi,
I had installed two applications : Music Box and Video Box.
Since I don't use them often I removed them (uninstalled) from my Macbook.
But after removing these applications, I noticed two of two options
on Safari > Window tab (toolbar) called Musicbox Queue and Videobox Queue.
Any ideas of removing them ? Altough they don't affect my system; it really isn't nice to see them
there as the applications itself is gone.
Thanks.

Did those applications come with an uninstaller? If so, did you use it to uninstall the apps?
If you did, please let the developer know that their uninstaller didn't work.
If they didn't provide an uninstaller, send a nasty-gram asking them to please do in the future.
I'm not familiar with those programs and don't know where something might install in order to alter the app like that except the Safari Extensions which you can access from the Safari Preferences.

Lost Mail Boxes and Smart Boxes

Hi can anyone give me some advice please as I have had to reinstall and have lost all of my smart boxes and some mail boxes which had valuable information.
Thank you in advance for any advice you can give.
Janey

No, you are not doing anything wrong. The original e-mail stays in your inbox until deleted, which will also delete it from the Smart Folder. The Smart Mailbox is a 'sorting' tool,but it doesn't actual contain the e-mails.

Combo box and Check box..help with code please?

Here is my problem...i have a list of check boxes and according to which one is checked, i need combo boxes to populate different choices.
as an easy example im only using 2 check boxes and two combo boxes.
the check boxes are named Choice 1or2 with export values of 1 and 2
the Combo Boxes are named List A and List B..
both containing options that say you checked box 1 and you checked box 2
any help would be greatly appreciated

Implode wrote:
"Help with code please."
In the future, please use a meaningful subject. Given that you're posting here, it's kind of a given that you're looking for help with the code. The whole point of the subject is to give people a high level idea of what KIND of help with what KIND of code you need, so they can decide if they're interested and qualified to help.
Exception in thread "main" java.lang.NumberFormatException: For input string: "fgg"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at assignment1.Game.Start(Game.java:120)
     at assignment1.RunGame.main(RunGame.java:18)This error message is telling you exactly what's wrong. At line 120 of Game.java, in the Start method (which should start with lowercase "s" to follow conventions, by the way), you're calling Integer.parseInt, but "fgg" is not a valid int.

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

TB 31.4 when compsing a message, has introduced a spurious blank line between the address boxes and subject box.

When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".

You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him.

Lion Server, Users login to Lion Box and Snow Box. EXPERIENCES...

OK so,
In this early doors Lion days, has anyone experimented with dual OS environments at all yet.
Has anyone got any Pros/Cons!
Any issues or is all swimmingly.
My users use iCloud, is there an order I should login, I am guessing that users should login to Lion Box, sign in with iCloud then login to Snow Box. Not sure what issues this will throw up but it'd be good to know i'm not alone in this scenario.
I am setting up a sandbox myself so will report back with any findings that I can.
Would be good to keep this thread going with anyones experiences
Cheers
TimaceUK

Austin,
I'm currently using OpenLDAP 2.4 so I am considering to downgrade. I'm not using RFC 2307 mappings but a custom mapping extending the RFC 2307 mappings with apple specific attributes like apple-mcxflags. (I'm using a apple.schema)
In my GitHub repository I'm implementing a method to automagically install OpenLDAP on Ubuntu for Apple clients so I can install this within 5 minutes since I became crazy entering the commands every time trying to get my clients to bind. Did all this before Lion came out so I updated some clients and they now refuse to login.
I will extend the script with the removal of the supported SASL mechanisms so the stuff in the article isn't necessary anymore.
Are your Lion clients able to complete the login cycle (authenticate, mount homedir) with your OpenLDAP 2.3 setup?
Also, how do your automount entry's look? Can you post the one with the home directories? Curious if it might be related to me changing the mount points.

Are the power cords fixable after they tear? Mine tore on the cord that runs in between the box and laptop. box and

My cord or ride outside the box outside that little 1/2 inch rubber piece that sticks out the box. Thanks

get a new one. do not try and repair it, it may become a safety issue.

Newb deserving assistance with Adobe Javascript (check boxes and combo boxes)

Hi, I'm a newb when it comes to javascript (using adobe acrobat pro 6.0).
I am working on a form that will allow me to autofill checkboxes based off of information chosen. Ideally, I would like to have a selection from a combo box autofill/auto checkmark check boxes. Alternatively, I would be willing to just have different selections presented with check boxes that when filled, would auto checkmark other check boxes (I know how to do this one, but I am not sure how to clear the check boxes if the initial one is unchecked).
I have the action button tied to the mouse up function. This just errors out.
var Citrix = this.getField("Citrix")
var Appro = this.getField("Appro")
var SAS = this.getField("SAS")
if (event.target.value=="Yes") {
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
else {
Citrix.checkThisBox = false
Appro.checkThisBox = false
SAS.checkThisBox = false
I have this that works, but I don't know how to clear the buttons when "Associate" is unchecked.
if(this.getField("Associate").isBoxChecked(0));
this.getField("Citrix").checkThisBox(0, true);
this.getField("Appro").checkThisBox(0, true);
this.getField("SAS").checkThisBox(0, true);
The other way I was working on it, was to use a combo box to autofill/checkmark check boxes. But this code doesn't work either.
function calculateTextField()
// get the value of the combo box
var comboValue = this.getField("Select").value;
// get the state of the checkbox
var isChecked = (this.getField("Citrix").value == "Yes");
var textFieldValue = "";
console.println(comboValue);
if (isChecked)
if (comboValue == 0)
textFieldValue = "";
if (comboValue == "Associate")
(this.getField("Citrix").value == "Yes");
else if (comboValue == "Specialist")
(this.getField("Citrix").value == "Yes");
else if (comboValue == "Team Leader")
(this.getField("Citrix").value == "No");
else
(this.getField("Citrix").value == "No");
else
textFieldValue = "";
this.getField("Select").value = textFieldValue;
Can anyone please assist me with this?
Thanks,
Chris

Hi Gene,
Thank you for the response. Are you saying that my initial formula should look more like this; ?
var Citrix = this.getField("Citrix")
var Appro = this.getField("Appro")
var SAS = this.getField("SAS")
if (event.target.value=="Yes") {
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
else {
if (event.target.value=="Off")
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
Thanks,
Chris

Gmail goes to Sent box and Trash box

Hi
Everytime I send a message it records in the sent box OK but also appears Trash in multiple numbers.
How can I recify this. Currently using Mavericks.
Any ideas

Sure you're looking in the right place, or just looking at your Inbox? When looking at your Inbox, tap "Maiboxes", what do you see?

Are sending box and receiving box IDOC same?

my sending client is Box1, receiving client is Box2, every month, we send GL balance from box1 to box2 thrugh IDOC
I compare WE82, WE30, SM59, WE20, all setting are same in BOX1 and Box2. I doubt this, in SM59, we only maintain RFC connection to Box2 in both Box1 and Box2.
Are the above correct? under what circustance, we should maintain different configuration in box1 and box2 for GL balance transmission?

Hi anand,
in we 19 when you send the idoc, the sender port refers to the port used by R3 to send the idoc and the reciver port is the port used by XI to recive the idocs.
If you are going to use the same sender and receiver port, then where is your idoc being sent from r3 back to r3??
Regards,
Bhavesh

Double Boxes and OTS Boxes

Similar Messages

Maybe you are looking for