Double change runs for same variant

Hi,
Can anyone help me regarding this .We are facing duplicate change runs for the same variant.This is very important for us
Regard
Srini

Hi Subhash,
Check the print parametes of the job, can be seen under steps --> double click on program --> print properties. There we have option to select new spool number.
So every time the job runs it will have a new spool number. Hope this helps.
Regards
Sushant

Similar Messages

  • Change run for Compounding  infoobjects

    Hi Experts,
    I need a solution.My question is that do we have any option like attribute change run for compounded infoobjects.Ex.Componding change run??.
    Issue is that.I have Characteristic infoObject ZBOMM i.e for Bill of material.It has attributes and compounded infoobjects.The componded infoobjects are 0plant and 0material.We know these compounded objects acts as an primary key for ZBOMM infoobject.When the changes happen for attributes,because of attribute change run it over writes all attributes of ZBOMM which will be available for reporting.But when it comes to compounding infobjects (0plant and 0 material) it will retain the old data and also reflects the new changed data.this is shows double entry in reports.I want the old data not to be present as it happens for attributes.
    Is there any solution for this problem?.
    Please let me know.
    Thanks and Rgds
    ACE

    Hi!
    Run RSDDS_AGGREGATES_MAINTAIN for 0plant and 0material.
    Hope it helps!
    Adwin

  • Can we apply attribute change run for datatarget (Master data )

    hi,
    can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
    pls advice how not to make the error repeat even after successful loading of master data.
    Thanks in advance, quick responce is greatly appreciated.

    Hi all,
    i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
    coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
    i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

  • Does SAP keep change history for program variants?

    Hi,
    Does anybody know whether SAP keep change history for program variants, like it does for PO, Material etc?
    If so, how could I get this information? If not, does it mean there is no way we could find the changes made to the variant?
    Thanks
    steven

    Hello Steven,
    I see that this is your first post to the forums here and I would like to welcome to SDN and BPX. I hope you will find these communities very helpful for learning and sharing information about SAP Products and Technologies.
    Regarding your question, I think the best place to find the answer would be the ABAP Development.
    However, being an experienced ABAP developer myself, I do not think program variants have change history. And yes, there is no way to retrieve the old values of the variants .
    Regards.
    Anand Mandalika.

  • Attr changes runs for  all Infoobject in a process chain

    Hi,
    I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
    How can I carry out the structural changes for all InfoObject in a process chain?
    Thanks!

    yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
    I don´t know what I do?
    This process actives all my ATTR and HIER in my chain???
    Message was edited by: Victoria León

  • Attr change run for huge PC!

    Hi,
    I have 30 infopackages which i had included in a new process chain and for all infoobjects i had created only one attr chnage run by including all the relevant info objects in the variant of aatr change run!
    there are actauuly some parellel processes as well in the end of PC!
    So how should i connect the attr change run process to the PC!
    just connecting to any of the IP s is OK? or i need to connect every IP to the attr change run which are ending the chain?
    Raj

    You can design your PC.
    If you are running change run after every load then you may run into change run locking issues...
    You can do onething load all attributes .. run the change once then...
    Load all hiers.. then run change run once...
    then load text...

  • Error in Change Run for 0cust_sales

    Hello Experts
    In master data load process chain for 0cust_sales it fails at change run step.
    with ABAP error short text "Exception condition "TREX_ACCESS_ERROR" raised."
    and error analysis
    " A RAISE statement in the program "CL_RSDDTREX_TABLSERVICE=======CP" raised the
      exception
    condition "TREX_ACCESS_ERROR".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls."
    Please help me understand and resolv issue here
    Thanks in advance.
    Regards
    Sudeep

    Hi,
    This seems to be related to BIA.
    Please check the below thread & link.
    [Attribute Change run was terminated;
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/6b/cda64246c6c96ae10000000a155106/content.htm]
    Regards
    Vishal

  • Attribute Change Run for Hierarchy

    Dear experts:
    we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
    My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
    Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
    Thank you very much
    Regards
    SzuFen

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • Attribute Change Run- For Custom InfoObject

    We have custom IO ZGN_PROD. For past few days attribute change run is not happening to this IO even though there are thousands of M version entries in P table. We have tried to use Report RSDDS_AGGREGATES_MAINTAIN for attribute change run but then also it is not going through. When we debug this report we found out that there is SQL statement in Report RSDDS_AGGREGATES_MAINTAIN which is not getting executed successfully.
    SQL Statement is
      UPDATE (<l_sx_itab>-name)
        SET  objvers = rs_c_ojbvers-active
             changed = rs_c_changed-nothing
        where objvers = rs_c_objvers-modified
          AND changed = rs_c_changed-insert.
    After execution of this SQL Sy-subrc is 4 instead of 0.
    What could be the reason.
    Can you please help me resolve this issue?
    Thanks and Regards,
    Samir

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • Attribute change run for Customer

    Hi All,
    I did a delta load of the customer data and got some new and changed records. I remember that we need to do an attribute change run after loading any master data. To do that, I went through the menu path Tools Apply hierarchy/Attribute change run...but couldn't find anything there. Do I need to do anything to get the "Customer" here to do the attribute change run.
    Thanks,
    RPK.

    Hi
    Go to
    Tools-->Apply hierarchy/Attribute change run
    Oncle ur there click execute to start change run,It will staart and finishes the Attribute change run.
    If u want to see the list of objects click on the 'InfoObjectlist' on the Tools-->Apply hierarchy/Attribute change run screen
    Assig point if it is helpful

  • How to view change documentation for settlement variants in CJ8G

    One of my settlement jobs did not run and I am trying to see what was populated in it...I have already changed the variant and I am currently settling new projects using that variant.  Is there any way to look at what was populated in the variant during the settlement job that didn't run?

    Hi
    You have 2 possible solutions to meet this requirement.
    Option 1: Implement point # 3 of SAP OSS Note 943559
    Option 2: This is a workaround solution to skip standard SAP check for activation of change documents of Classification system and allow entries to be written into CDHDR and CDPOS table through MM01 / MM02 / CL20N tcode
    Solution: Implement an implicit enhancement inside include program 'LCLVFF10', at end of subroutine 'FILL_REDUN' i.e. line number '337'.
    Here modify the entry of table 'REDUN' where OBTAB = 'MARA' and set the flag 'AEBLGZUORD' equal 'X'. This will activate the change document creation for Change Object 'CLASSIFY' in CDHDR and CDPOS tables.
    Sample Code
    LOOP AT redun WHERE obtab EQ 'MARA'.
           redun-aeblgzuord = 'X'.
    ENDLOOP.

  • Clubbing of PR through MRP run for same group items

    Presently PR's are generated under MRP for single line item. we required consolidation of the PR material group wise. is it possible? if yes, how? kindly suggest.

    Dear praneetsadekar ,
    If my understanding is correct then during MRP run it 's not possible to create single Purchase Req.for a list of materials that fall
    under same material group.
    check and revert back.
    Regards
    Mangalraj.S

  • Issue of Materials Management staff entering double PO#, PR# for same Invoice

    Hi,
    Anyone had encountered the Materials Management Dept staff entering double PO numbers and PR numbers for the same invoice number?? The double PO and PR numbers are all different number but it causes double counting problem..
    Anyone encounter it and come up with any settings to the SAP to warn the data entry staff on any existing PO/PR numbers that already exists for the invoices of the same number? Or there is any settings that can be done to stop the data entry from entering two different PO/PR numbers for the same invoice number???
    Please kindly help. Thanks!!!
    Regards,
    Richard

    Hello PKW
    You are right about the default PO type for ME21N or ME21.
    But there is some hope with EXIT_RV54POCR_006 (Function Module)  via enhancement V54U0006. I am not sure if it helps  for PO type or for other header data only.
    Please go through the following OSS notes and those mentioned within:
    506605 - Info: PO generation when transferring shipment costs
    746691 - INFO: => LE-TRA-FC-SET => purchase order
    Let me know if it helped you.

  • Change Log For CU60 ( Variant Table )

    Hi All,
    It has been found that if any entry is added/deleted/modified from a Variant Table (Transaction CU60), no
    change log is found through any standard transaction.
    We even tried using Transaction AUT10,Table CDHDR/CDPOS but  requirement not met.
    Kindly advise on the solution.
    Thanks
    Stuti

    Hi Stuti,
    Why dont you try using change number, as i remember when we go to CU60 there is option to key in change number.
    and i hope using change number it will capture history.
    try out and come back.
    Thanks
    Ritesh

  • Update SQL in Field Change Running for a Long time and PIA signs out

    Hi OTN
    I have put the following Update SQL in one of the Component Record FieldChange Event
    MessageBox(0, "", 0, 0, "Fieldchange triggered rnid=" | PS_AESQL_RN_TBL.RUN_CNTL_ID | "op=" | PS_AESQL_RN_TBL.OPRID | "sqlid=" | PS_AESQL_RN_TBL.SQLID);
    SQLExec("UPDATE PSSQLTEXTDEFN SQ SET SQ.SQLTEXT =
    (SELECT TXT.SQLTEXT FROM PS_CUSTOM_TBL TXT WHERE TXT.SQLID = :1") WHERE SQ.SQLID = :2;
    :1 = sqlid from custom table which has custom SQLIDS and custom SQLS provided
    :2 = "PS_DYN_AE MAIN Step01 S"
    SQLid OF an sql action in an AE.
    The update works fine in the backend when executed separately
    Though the sql updates only one row it takes a long time when FieldChange is triggered and the PIA logs out ..
    PS:The values required for the SQLExec that is :1 and :2 are fetched correctly when the FieldChange is Triggered.
    I have verified this using the MessageBox which Popped up the parameters before the SQLExec was triggered.
    Any idea or solution why such error occurs would be really helpful
    Thanks
    Niranjan

    Answer to that would be No.
    PeopleCode does not allow and is not intended to manipulate PeopleSoft Tools data.
    I have to ask you, why you want to do this exercise?
    You should avoid as much as possible to use SQL in PeopleCode, because
    - this is not checked by the PeopleCode compiler for correctness
    - can be a performance killer
    - possible data integrity issues due to not inserting/updating all relevents tables
    - any errors are not to be caught by the application and sql error are presented to the user
    So, do not use SQL unless all other options fail to do the job and definitely do not alter data in PeopleTools tables!
    This could make the entire application crash and the only solution would be to restore your database, with all data transactions lost untill the restore point.
    You should rather look at using metasql and dynamic sql building within the application engine.
    See PeopleBooks on this subject.
    Enterprise PeopleTools 8.51 PeopleBook: Application Engine > Using Meta-SQL and PeopleCode > Including Dynamic SQL

Maybe you are looking for

  • Use of RRKMULTIPROVHINT table in multiprovide

    Hi All, Could you explain me what is the use of the above table? I was reading a document named "How to create efficient multiprovider queries". It says In the RRKMULTIPROVHINT table, you can specify the MultiProvider and a characteristic for partiti

  • Connection Problems with PD150

    Just booted up a brand new MacBook Pro with FCP 7 recently installed and i'm having trouble getting the presets right for a PD150. FCP and the camera arent seeing each other and program keeps telling me theres no external device connected. I set the

  • URGENT PLEASE HELP ME FIGURE OUT HOW TO DE-GREY THE TRACK INFO VOLUME?

    i need to know how to make the track info volume able to operate. meaning that it is grey and the level cannot be changed therefore. how do i get the volume level to become useable and not just be grey? thank you. -minor meriwether. ([email protected

  • Using iphone as a wireless router connected to imac??

    Silly question here, Okay is there a way to use the AT&T Edge network, via my iphone as my conduit to the internet, Yeah, i know its slow, but if I cancelled my DSL, that would pay for my monthly plan. In other words Plugging in my iphone to my imac

  • Replacement program: what if I no longer have my old nano?

    I have turned my house upside down and cannot find my old nano, although I did find the original box. I entered the serial number and it appears I am eligible for the replacement iPod. However what do I do if I can't find the old original one? I upgr