Double Check This RAM will work in my MAC PRO please?

Hi!
I'm going to upgrade the RAM in my Mac Pro from 2006. Here are the model details:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 5 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): G8*****UPZ
Hardware UUID: 00000000-0000-1000-8000-0017F20212FC
I'm thinking of buying this RAM on eBay, because I don't have much money. Will this RAM work okay? Any recommendations/advice?
Here's the link:
http://www.ebay.com/itm/32GB-8X4GB-MEMORY-PC2-5300-667MHZ-ECC-FB-DIMM-FOR-APPLE- MAC-PRO-1-1-MA356LL-/131185864402?ssPageName=ADME:X:AAQ:US:1123
Thanks for your help!
<Edited by Host>

Amazon has the FBDIMMs and at excellent price. Can't say the same for OWC on price or quality really when it comes to those FBDIMMs. OWC 'sometimes' has had a lot of trouble - or people on here with having to go through multiple exchanges with new sets back in 2009-10 plus charge much higher.
They want 3x what I paid for 16GB and they are not even as good let alone better even in support and warranty.
"Came with software" you don't own is what that usually means, not the license and master copy etc.
I keep my 1,1 running and yes dumped a lot $$ into it over the years, probably longer than warranted (did a lot of upgrades in 2013: ATI 5770, Sonnet Tempo, 16GB FBDIMMs) and I keep upgrading and replacing SSDs went from 128GB to 250GB to 500GB and moving some to the Sonnet Tempo SSD.
It does not qualify as 64-bit firmware (EFI32 vs UEFI EFI64) and has lesser PCIe 1.0 and only 1 - 16x, 1 - 8x, 1 - 4x, and 1 - 1x slots. So graphic card in 8x or 16x and your most demanding card. Only the lower slot is double-wide for most any graphic card.
Lion stopped getting security updates last month too, and some software more and more requires 10.8 or above. There are ways to force those to run on 2006, might be fun if you have the mind set of a programmer or like to fiddle with operating systems.
I already pointed to Amazon and brand and mentioned those keep to 59*C and have them in mine for nearly two years.
I think even with the cost of Windows 8.1 license I assembled (already had case and PSU and SSD/HDD) an i7-4771 PC for $800, vs. the cost of upgrades I did in 2013 alone on my Mac Pro which though has stood me well for 8 years. People that already own one feel fine upgrading, and some have replaced processors for 8-core 5355s when that made sense and could use it now that you can find ebay pair for $100 or even less. But Sonnet Tempo Pro etc today? I just wish there was a desktop - 4-core (not dual core), not soldered memory. A step above the Mac-Mini. And a Mac-Mini fully configured costs way too much for my tastes.

Similar Messages

Will this hard drive work with my Mac Pro?

Just looking for confirmation that this hard drive will work with my Mac Pro:
http://www.aria.co.uk/Products/Components/HardDrives/SATA+%28Serial+ATA%29/500GB+to+1TB/Samsung+HD103SJ+SpinPoint+F3+1TB+SATA- II+3.5%22+Hard+Drive?productId=37726&page=4&rqcType=q
Thanks

Hi Fred,
usually any 3.5" form-factor SATA-connected harddisk works in a Mac Pro.
So I don't see any reason for this harddisk not to work.
Regards
Stefan

What video card will work in a mac pro 1.1 2006?

what video works in a mac pro 1.1 2006 ? (I have a ati 1900xt 512 mb now!)

Not to be difficult but you do realize this is being asked and discussed today in multiple threads, and for the last... 23 months too.
Apple sells ATI 5750 $249 and is fine.
http://www.barefeats.com/wst10g5.html
http://store.apple.com/us/product/MC742ZM/A

Wil this Dell Display work with my mac pro ? standard graphics card

http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=dhs&cs=ukdhs 1&sku=184923
Above is the link to the one i want! will it work? i think yes but second opinion would be nice.

It depends in part on what graphic card it is attached to. And if you have 2nd monitor.
Mac Pro 2009 + OEM GT120 + Dell doesn't always work with the MiniDisplay Ports.

What version of osx server will work on a Mac Pro 1,1

I have a Mac Pro 1,1 and want to turn it into a server. What is the latest version of OS X server I can put on it? I'm a server newbie so forgive my ignorance but in what situations is processing power important on a server?

Not to be difficult but you do realize this is being asked and discussed today in multiple threads, and for the last... 23 months too.
Apple sells ATI 5750 $249 and is fine.
http://www.barefeats.com/wst10g5.html
http://store.apple.com/us/product/MC742ZM/A

What web cams with built in mics will work with the MAC PRO

I have my MAC PRO conected to my HD TV, not a monitor. I would like, to start using Skpe.

If you do a google search on say, os x web cameras, you would ffind pages like the following:
List of compatible USB webcams for macintosh
Mac Webcams That Just Work

Has anybody gotten a RocketRAID 640 working in a Mac Pro?

I have a RocketRAID 640 I purchased, based on the fact that it "had OS X drivers". Unfortunately l'm running into a bit of a snafu here.
The English website (www.highpoint-tech.com) shows for the RR640 drivers that "Mac drivers are available at http://hptmac.com/cn". This is their Chinese website of all places (why, if it has Mac drivers are they not listed on the English site?). I recently was contacted by their tech support, and they appear to be totally clueless why their driver isn't working.
Ya see, the one they link to is this one:
http://www.hptmac.com/US/productfiles/HPT-Quad-eSATA-mac-v100-100120.dmg
But it's on the Chinese website. Yay?
So here's the issue: The .kext file's info.plist shows an IOPCIPrimaryMatch entry of "6441103". Breaking that down, the 1103 is the Marvell 9128 SATA controller (there are two on the card, oddly at x1 link width). The 644 is the ID of the card the driver is looking for in order to load. In other words, the driver (RR64x.kext), from the installer packaged labeled "RR644M" (for RocketRAID 644 Mac), will only see the RR644, but not the RR640 which I have. Unfortunately, injecting the proper IOPCIPrimaryMatch entry into the .kext file renders the .kext useless as it becomes a file that has "been installed incorrectly and cannot be used", because a user (me) modified it.
Has anybody gotten this card to work in a Mac Pro in OS X (it works fine in Windows on a Mac Pro) other than the inability to use CTRL-H to activate its BIOS configuration utility at bootup)? And if so, what driver are you using?
I've lost three days worth of work/"fun time" to trying to figure this out. I don't know why the card is so hard to get working, since functionally it's identical to the 644, only instead of eSATA ports they're all internal. Even the controllers used are the same, as is the link width of the card itself (but apparently not the firmware?).
I knew HighPoint had ridiculously bad support, but their hardware in general is rock solid (once you get it up and running). I kind of want my Vertex 3s to finally run speedy. I'd really hate to have to get a 6Gbps SAS card instead (and it'd have to be bootable which is EXPENSIVE) in order to plug into my Mac Pro 1,1's SAS cable that it uses to control the four internal HD bays (though that would give the HD bays native 6Gbps speed!).

Highpoint RR Quad eSATA for Mac is sold on Apple Store
http://store.apple.com/us/product/H1113LL/A
with 4 favorable comments, from one that flashed the firmware for EFI32 to be bootable (odd, as they said they had "Early 2008" which does not jive), a few with 2010 models.
Sonnet, FirmTek or other with 6G PCIe controller IF it does not need to be bootable (you said you wanted that); and, you aren’t going to be pushing for really high performance with a single SSD.
If you want to stay with Highpoint (exchange?) HPT links to Apple product page -
RocketRAID Quad eSATA 6Gb/s for Mac $249
http://www.hptmac.com/US/product.php?_index=65
What I did find were these Highpoint downloads:
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Driver version 1.0 - which you already have
http://www.hptmac.com/US/productfiles/bios_driver/HPT-Quad-eSATA-mac-v100-100120 .dmg
There is an EFI zip file, maybe you need to flash yours.
Highpoint Mac support page: from 9/2009
http://www.hptmac.com/US/product.php?_index=57&viewtype=download
Lion compatible products page:
http://www.hptmac.com/US/categories.php?compatibility=18
Highpoint Lion Support Mac
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
Amazon (USA) also sells the same card carried by Apple Store -
http://www.amazon.com/HighPoint-Quad-SATA-6Gb-Mac/dp/B003MXCZMI/
Barefeats 6G SSD (ATTO Express R644, RocketRAID 2721) support for 6G SSD
http://www.barefeats.com/ssd6g02.html
Barefeats older 3G RocketRAID
http://www.hptmac.com/PDF/RocketRAID_eSATA_For_Mac_Barefeats_Review.pdf
http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
And what I found about RR640 (I have 620s in my PC but the extra 40 seconds to the boot time and stability were a no-go for me)
The Highpoint RocketRAID 640 is a PC card (only).
http://www.bit-tech.net/hardware/2011/01/04/high-point-rocketraid-640-review/1
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115077
http://www.highpoint-tech.com/USA_new/series_rr600.htm
Windows – Linux – FreeBSD driver support (only)
Apple Community –
Has anybody gotten a RocketRAID 640 working in a Mac Pro?
https://discussions.apple.com/message/15909237#15909237

Will Samsung M470T2953EZ3-CE6 DDR2 RAM 667MHz work with my Mac Mini 1.1 A1176?

Will Samsung M470T2953EZ3-CE6 DDR2 RAM 667MHz work with my Mac Mini 1.1 A1176? I want to upgrade the memory in my Mini from 1Gig to 2Gigs. I have been offered this memory at a reasonable price and would like to know if it will work.
Thanks

Hi John, looks like it will...
http://blog.rodrigosepulveda.com/2008/09/for-sale-laptop.html
http://www.racingwest.com/news/articles/18910-samsung-original-approved-memory-f or-your-laptop.html

Can any body tell whether this logic will work or not

To calculate quantity for the material for particular month
This report is used to calculate demand plan(zzdpfc) for market 001 and 002
eg: the opt shld be
material number           month              quantity
1. 1000                           02/2007              40 (market 001+002 for the same      materila and same month)
2. 1000                          03/2007               20 (same as above)
3. 1001                           02/2007               30 (same as above)
i want to know whether this pgm will work according to this requirement or not .if not please change the code accordingly .please let me know it urgent.
REPORT ZPRODUCT_ROLL                           .
TableS: S507.
DATA: BEGIN OF T_DATA OCCURS 0,
       matnr LIKE S507-matnr,
       SPMON LIKE S507-SPMON,
       ZZDPFC LIKE S507-ZZDPFC,
       ZZMARKET LIKE S507-ZZMARKET,
       END OF T_DATA.
DATA:WA_DEMPLAN(10) TYPE C.
data:material(18) type c.
data : period like sy-datum..
period = sy-datum+0(6).
Select    mATNR SPMON ZZDPFC ZZMARKET
From S507
into corresponding fields of table t_DATA WHERE
VRSIO = '000' AND BEDAE = 'KSV' AND ZZDMTYP = '001'
AND ZZDPFC GT '0' AND ZZMARKET IN ('001','002').
AND SPMON >= PERIOD.
   SORT T_DATA BY MATNR SPMON.
write:/04 'Material',25 'Demand Plant', 50 'Period'.
LOOP AT T_DATA.
move t_data to material.
modify t_data.
*WRITE:/02 t_data-MATNR ,25 t_data-ZZDPFC,45 t_data-ZZMARKET,
*70 t_data-SPMON.
at new spmon.
sum.
write : /02 material color 5,25 t_data-zzdpfc COLOR 5 ,50 t_data-spmon color 5..
endat.
endloop.

hi arun,
use collect keyword in the loop, it add the quantity fields for the particular material
or
use control brake statement in the loop and endloop.
regards,
seshu.

Anyone knows whether this method will work?

Hi,
I am trying out this method to construct an applet but I couldn't get it to work.Does anyone here know whether this method will work and how to debug it.Thanks.
import java.awt.*;
import java.applet.Applet;
import java.awt.event.*;
public class Project extends Applet implements ActionListener {
private Button circle, square;
private Model aModelInstance;
public void init() {
circle = new Button("Circle");
add(circle);
     circle.addActionListener(this);
     square = new Button("Square");
     add(square);
     square.addActionListener(this);
aModelInstance = new Model();
public void paint(Graphics g) {
     aModelInstance.display(g);
     public void actionPerformed(ActionEvent event) {
if (event.getSource() == circle)
aModelInstance.getCircle();
if (event.getSource() == square)
aModelInstance.getSquare();
repaint();
class Model {
     private aModelInstance.display(g)
     public void getCircle() {
     g.setColor(Color.red);
g.fillOval(145,89,122,122);
private aModelInstance.display(g)
     public void getSquare() {
g.setColor(Color.green);
g.fillRect(145,89,122,122);
public void display(Graphics g) {
}

It will work for the most part put there is a few problems that you would have to work out. Most of the problems are in the inner class Model. I commented out a couple of lines in there that did not make sense. In the getSquare() & getCircle() methods you are referring to the variable 'g' where there was no declaration for that variable, in Model. So I modifed the method to have an input parameter of Graphics, that will need to be passed to the method. Then I modified the code in Project so that it passes Graphics when it calls those methods.
The code now compiles cleanly but there is still some work for you to do. You should modify the getSquare() and getCircle() methods to return the Graphics. Then in the actionPerformed() method, call the paint method with the returned Graphics. Good luck.
import java.awt.*;
import java.applet.Applet;
import java.awt.event.*;
public class Project extends Applet implements ActionListener {
private Button circle, square;
private Model aModelInstance;
public void init() {
circle = new Button("Circle");
add(circle);
circle.addActionListener(this);
square = new Button("Square");
add(square);
square.addActionListener(this);
aModelInstance = new Model();
public void paint(Graphics g) {
aModelInstance.display(g);
public void actionPerformed(ActionEvent event) {
if (event.getSource() == circle)
aModelInstance.getCircle(this.getGraphics());
if (event.getSource() == square)
aModelInstance.getSquare(this.getGraphics());
repaint();
class Model {
//private aModelInstance.display(g)
public void getCircle(Graphics g) {
g.setColor(Color.red);
g.fillOval(145,89,122,122);
//private aModelInstance.display(g)
public void getSquare(Graphics g) {
g.setColor(Color.green);
g.fillRect(145,89,122,122);
public void display(Graphics g) {
}

I have a Linksys 10/100 5 port workgroup switch attached to an Airport Extreme. Does anyone know if this setup will work properly?

I have a Linksys 10/100 5 port workgroup switch attached to an Airport Extreme to expand the number of ports. Does anyone know if this setup will work properly?

Sure - just be aware that it will limit you to 100Mb/s internal network speed. If you want to be able to transfer files internally on your network faster, look into a gigabit switch.
Matt

How this Function will work

Hi,
Below these are my variables
Circ
Circle
Circumference
radius
Area
and now i want to know what is this below syntax means. i mean to ask below they r using " =>" how this function will work exactly plz can anyone explain me ,it will be great helpful to me.
circ = circle=>circumference( radius ).
area = circle=>area( radius ).

Hi,
It is a Class Component Selector.
The label class=>comp can be used to access a static component comp of a class without an instance of the class having to be created. The character => is the class component selector. The label class of a class must be to the left of the class component selector. The name comp of the component must be to the right of the object component selector.
The class component selector can also be used to access the data types and constants of an interface.
ifac=>type, ifac=>const
The label ifac of an interface must be to the left of the class component sector. The name type of a data type defined with TYPES or a constant defined with CONSTANTS must be to the right of the object component selector.
Note
It is also possible to access the static components of a class using the object component selector if an instance of the class was created.
Example
Declaration of a class factory and access to its static attribute oref.
CLASS factory DEFINITION CREATE PRIVATE.
PUBLIC SECTION.
 CLASS-DATA oref TYPE REF TO factory.
 CLASS-METHODS class_constructor.
 METHODS do_something.
ENDCLASS.
CLASS factory IMPLEMENTATION.
METHOD class_constructor.
 CREATE OBJECT oref.
ENDMETHOD.
METHOD do_something.
ENDMETHOD.
ENDCLASS.
factory=>oref->do_something( ).
Regards,
Padmam.

Will this hard drive (Seagate ST1500DL003 Barracuda Green Hard Drive) work in a mac pro?

Have a mac pro at my church that has a 500 gb and a 1 tb hard drive but since we do a lot of video editing on it the hard drive fills up fast but was wondering if the Seagate ST1500DL003 Barracuda Green Hard Drive
would work in the mac pro 1,1 just need some more storage and maybe a time machine back-up?

I have seen a lot of change in Green drives and new models, be sure the reason it is cheap is trying to off load and get rid of stock.
Some people have no trouble and use them without issue. External USB for TimeMachine can result in the drive parking and OS X and TimeMachine losing communicating. While others have used them even in arrays inside w/o trouble.
3TB Green has been popular. I've only used 1 and 1.5TB though.

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

Will 1.5Tb or 2Tb works on a Mac Pro

Just out of curiosity, will the newest 1.5 and 2 Tbytes HD works on a Mac Pro ?
The documentation talk about 1Tbyte disks, and up to 4 Tbytes total, but this may just be because that was the available disk size at the time the Mac Pro early 2009 came out ...
Maurizio

They work perfectly and you'll find those limits documented were simply because the drives weren't available at the time. I have a 1.5Tb Seagate Barracuda in mine and it's perfect.

Double Check This RAM will work in my MAC PRO please?

Similar Messages

Maybe you are looking for