Double Click on Magic Mouse No Longer Works after 10.9.1 Mavericks Upgrade

I just recently updated to Mavericks 10.9.1 and once the computer restarted, I noticed that double-click on my Magic Mouse no longer worked.  I searched the forum and couldn't find anyone experiencing this.  I also went into System Preferences --> Mouse but there is nothing about enabling double-click or adjusting double-click speed on there.
Would appreciate if someone were able to help me solve this.  Thanks!

Try resetting the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

  • Magic mouse no longer works after Lion upgrade

    After upgrading to Lion my magic mouse failed to work. I plugged in an older USB mouse and thankfully it does work. It appears the System Preference for Blue Tooth no longer has my machine name in it, instead it has "Name not available" and the "On" check box will not stay checked when I reopen the preference. The syncing process "Set Up New Device..." doesn't seem to work either, it searches but doesn't find eventually the flashing LED on the mouse goes out.
    I've tried to solve this but failed. I believe its something wrong with the installation of Lion on my iMac because I installed Lion on my lap top and the magic mouse WILL sync with it.
    What do you suggest I do to remedy this situation?

    Solved it myself. Re installed Lion.
    Thanks Radio for your help

  • Scrolling on Magic mouse no longer work after OSX update

    I have just performed an OSX update and after restarting I immediately noticed that the scrolling function and other gestures no longer work on the magic mouse. I have also noticed that no gestures work on the Mac Book Pro track pad. The only function that works on the mouse is moving the mouse pointer and the buttons. Same goes for the track pad. Some great update that was. Has anyone else discovered this and how do I repair this loss of function? When I first initiated the update, I saw that there was a download required which mention some improvements for the mouse/keyboard but mainly updates required to support the new magic track pad. Is it possible to revert this individual update and if so how? Thanks.

    You were almost correct, but not quite. You can see updates in /Library/Updates. I'm not sure what receipts is, but it didn't contain the track pad/mouse update package I was expecting to see. However, I did eventually find it in Updates after a trip to my local Apple store. What happened was that the original update process completed about 95% but for some reason crashed. When I restarted, it appeared that there was nothing wrong, until that is I tried to use the mouse and track pad. I presume that the update process uninstalled the previous package but didn't actually install the new update. I downloaded the the latest update from Apple, but it appeared to be older than what I downloaded from the Update process, so it wouldn't install. I would suggest that here lies a bug. The package install process did detect the new trackpad / mouse package but it didn't detect that it wasn't installed and should have prompted me to install it.

  • Magic mouse no longer working in Windows 7

    Hi, I posted a topic under the Windows section but got no answer. When I first installed Windows 7 on my Mac (Sorry poor Mac but I had to), my Magic Mouse worked seamlessly with Windows until recently, I booted up in Se7en and my mouse no longer worked, I can't find any trace of bluetooth peripherals on the computer, in "Administration tools" and "Hardware manager" (or whatever it's called) I can't see a sign of my Broadcom Bluetooth adaptor. The bluetooth drivers are installed and I can see that in "Add or remove programs" so I don't know how to fix this. I already tried reinstalling the drivers from the boot camp DVD, and I also uninstalled Boot Camp, reinstalled it and updated it. Nothing works. If you have any ideas apart reinstalling Windows I would really appreciate because using my trackpad on a desk while having a Magic Mouse on the side (especially in Windows the trackpad *****) is driving me nuts. Thanks
    Scott

    Hi eg1978
    Welcome to the HP Forums! I see that you are having issues with your two finger scrolling. I have a couple of things for you to try. This HP document Using and Configuring the TouchPad has a section on Turning individual gestures off and on and make sure that the two finger scrolling is enabled. If that does work then reinstall your Synaptics TouchPad Driver.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Magic Mouse no longer works on desk surface (varnished wood)

    My magic mouse used to work fine without a mouse pad, but recently has become almost non-functional. As I move the mouse around on a varnished wood surface, it now seems to lag badly, almost stopping completely despite contined movement of the mouse. I've tried trashing the prefs, uninstalling MagicPrefs, reinstalling MagicPrefs, dumping MagicPrefs for BTT, etc. Nothing seems to work. I do have to regularly clean the plastic tracks on the bottom due to a buildup of dust, etc, but that, too, does not improve my performance. Does anyone have other suggestions for how to fix this problem? It would be a shame to have to use a different mouse.

    WildBill,
    I'd use a Q-tip and clean the laser light and sensor. Try new batteries (not rechargeables) and look for anything causing interference on the 2.4 mhz band.
    I had this problem with a mighty mouse where it would only track on magazine or something with lots of color variation. I eventually just replaced it.
    Regards,
    Captfred
    Edit: One addition thought. If you use the program USB overdrive, it's known to cause conflicts.
    Message was edited by: captfred

  • Installed snow leopard and the right click on my mouse no longer works. Any ideas?

    I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got the right click menu but now when I right click the file or group of files are no longer highlighted. this *****. any ideas?? Between the hassle of replacing a hard drive, mouse problems, firefox, opera, office mac and elgato tv problems and issues im fed up.
    Message was edited by: tele59

    Apple menu -> System preferences -> Keyboard and Mouse should give you controls over the mouse. If not, either Steer Mouse or USB Overdrive might give you better control.

  • Left double click button on mouse is not working

    My Left double click is not working on my mouse. I tried using a different mouse to test whether it was a hardware or software issue. I still have the same issue with a different mouse. I also get what looks like tiny barcodes to the top right of my mouse pointer. This is mind boggling to me. Is anyone else having this issue and what can I do to resolve it? Thanks in advance.

    I also get what looks like tiny barcodes to the top right of my mouse pointer.
    That is usually a software corruption problem.
    Disk Utility ( Repair Disk ) is a good place to start.

  • Magic mouse no longer works, Magic mouse no longer works

    Magic mouse will right and left click, but otherwise, is not responsive.

    Go ahead and visit your local computer store (not Apple) and try out all different kinds of mice that best fits your person.
    I am kind of fond of Logitech mice myself, but found a nice Targus that takes a beating and keeps on ticking, got a netbook bag with it for free.
    Good thing, Mac's work with any old mouse and keyboards.
    learn a wealth of info here
    https://discussions.apple.com/message/16276201#16276201

  • CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

    Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue? 
    Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

    Hi,
    According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
    Roger Lu
    TechNet Community Support

  • Keyboard and Mouse no longer work after update

    Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly.  However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal.  Unplugging and reconnecting my keyboard and mouse did nothing.
    A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
    Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled.  Apparently it's a fairly standard warning).
    The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
    Does anyone have any ideas as to what might have caused this issue?
    Thanks for any help you can provide.

    Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

  • PS/2 mouse no longer works after update

    I just updated my system, and now the mouse doesn't work.
    The cursor is stuck in one area of the screen. I can move it a few centimeters in any direction, but it snaps back to the original position when I stop moving the mouse. The problem is rather bizarre.
    I switched out mice to make sure it wasn't a hardware problem, and the mouse works fine in my other operating systems.
    What could cause this really odd behavior? I'm thinking I have to change a config file, but I'm not sure what one. My xorg.conf looks fine.
    Thanks for your help.

    I checked my xorg.conf against the backup with meld and there weren't any changes made to it besides the vendor name of my monitor: Acer. This is the same xorg.conf I used before updating and I didn't have problems with it before, which is why I think the problem may lie somewhere else.
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Apr 17 00:40:10 PDT 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "dbe"
    Load "extmod"
    # Load "type1"
    # Load "freetype"
    Load "glx"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Acer"
    ModelName "p201w"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "True"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection

  • Magic Mouse no longer works on mousepad?

    Don't know why, don't know if it was an update, or the fact that i just went to Lion, but now my mouse only works on my hard table surface, and barely moves (pointer just chunks along) if i try moving the mouse on the mouse pad, which it works fine on for a year.
    Batteries are 100%, and mouse is clean as a wistle other wise. What gives?

    Hello CC9799:
    We both tried.  Apparently a host decided to edit the thread (my remarks as well as yours).  Your response (and, for that matter mine) were intended to help. Sadly, there are a few people who are so full of themselves they arrogantly dismiss people who volunteer assistance.
    Keep posting.....as you see from my little purple dotsI have been doing this for awhile.  I should have reminded myself it  is sometimes best to just ignore things and move on rather than descend to the level of some people.
    Barry

  • I used to move an e-mail from my account to a local folder by click and drag which nio longer works after recent system updates but the move to does work.

    I'm using Thunderbird (a very good product) on an 8.1 system. I recently performed Microsoft updates and disk maintenance. I no longer can move an e-mail from my Thunderbird account to a local folder using "click and drag". I can't find a solution. The "move to" works just fine.
    Thanks for any help. Jim.

    hold shift while Thunderbird starts.
    In safe mode does it work?

  • VPN no longer working after iOS 8.0.2 upgrade. Anyone having same issue?

    Since I upgraded to iOS 8.0.2, the PPTP VPN configurations no longer connect.  I deleted and re-created the settings, but this did not solve the problem. Is there a way of fixing this?

    Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

  • VPN no longer working after iOS 8.0.2 upgrade

    Hello, after the upgrade to iOS 8.0.2 we have some problems with VPN.
    The connection runs always stable and we don't change anything on our infrastructure.
    But since the upgrade the IPads/Phones always show the notification "could not connect the server"or else.
    This could not be true. The server is available from other clients (not ios). We test it with Wlan and 3G like always before.
    I heard that we should delete the VPN profile and create it new on the ipad but it don't solve the problem.
    We use IPSEK with IKEv1 and a PSK.
    Are there any changes on the ios VPN client??!
    I hope you can help me.
    THX

    Yes, same problem here. Tested on both 8.0 and 8.0.2. VPN will connect but will not pass traffic from the idevice into the network. I am able to ping the device from inside of my network to its VPN IP address. However, I am not able to get to any internal resources from the device. I have done some of the troubleshooting that is posted above with no success. I have rebooted the device, reset network settings, and I have reset the entire device. I'm testing on an iPhone 5 and an iPad2. I also have an iPhone 4s here that is still on IOS 7 that has a working VPN and can connect to all internal resources as normal. I contacted Apple support yesterday and after speaking with 2-3 people, all of whom acted like this was the first VPN issue they had ever heard about, I was told that a "Senior Support Agent" would contact me back. Right now I have 5 users affected by this issue. Those 5 people will have new Android devices before the End of the day. I have sent an email to the other 60+ IOS users instructing them NOT to update their device until the VPN issue is resolved. I will post any findings here including the phone number and extension of the Apple Support Personnel that I spoke with yesterday if I do not get contacted in a timely fashion. I can understand that a mistake has been made, but this issue is wide-spread and needs to be addressed.

Maybe you are looking for