Double click problem in Premiere CS4

I can’t open my projects by double clicking on the projectname.proj
Project name icon is missing and when I try to right click/open in and select Premiere it says:
This is not windows valid Win32 program ( OS = Windows XP SP3)
When I go to START / Premiere Pro SC4 and load Premiere first and then navigate to projectname.proj (The icon is still missing) the projects loads up nicely and everything is working just fine.
I installed Premiere Pro CS on another PC where OS = Vista Business Edition using where same installation disc (I don’t know if this is legal but I had to try it) and there was not any problems at all.
I just can’t use this PC because it was my wife’s and it took all the space on her hard disc so I must to remove it.
sikter

Hello again!
I was ignoring this particular problem for a while but I did have some project loading issue from time to time.
So I went to control panel\folder alternatives again and selected "advanced settings".
There is an option to add new file type and make its path to the right "exe-file"
I have tried it before but this time I noticed that I wrote command "OPEN" in the field where I was supposed to type what kind action system will perform.
I tried "LOAD" and problem was still there. Then I realized how stupid I was:
My OS is not in English but in Norwegian. I typed "Åpen" and almost immediately all my icons turned to pink.
It was an extraordinary experience. Like in those chick movies
I never experienced any bug-related problems after that.
Hope this thread will help someone in the future.
All credits to Mr. Hunt
Best regards
sikter

Similar Messages

Upon Double Click in Finder, Premiere Proj opens with Speedgrade

"New" Mac Pro running Creative Cloud
I updated Speedgrade yesterday, now whenever I double click on a Premiere project in finder to launch the project in Premiere, Speedgrade wants to open the file instead.
I know I can right-click and tell Finder to always open the .prproj with Premiere, but that's not working.
Any suggestions?
Thanks,
Banks

Hi Banks,
Try following the inscructions posted here. This is a OS issue.
Mac OS X: Double-Clicking a File Opens the Wrong Application
http://support.apple.com/kb/ts2291
Peter Garaway
Adobe
Premiere Pro

AVL Double click Problem

Dear Experts,
I hv created an ALV report. when in double click on the record it take me to the required tcode (FB03).
But the problem is ,it always display last record of internal table if I clicked on first record,
Can any one suggest me something.
Regards,
Maverick

Thanks for ur reply.
I m using normal ALV. go through the following
form display_all_item_alv.
w_repid = sy-repid.
perform update_catalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = w_repid
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE'
   IT_FIELDCAT                       = I_FCAT[]
   I_SAVE                             = 'X'
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = i_faglflexa_all
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
form user_command using r_ucomm like sy-ucomm
                  rs_selfield TYPE slis_selfield.
w_gjahr = p_gjahr.
case r_ucomm.
     when '&IC1'.
        if r_open = 'X'.
          set parameter id 'BLN' field i_faglflexa_open-belnr.
        elseif r_clear = 'X'.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        else.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        endif.
      set parameter id 'BUK' field p_bukrs.
      set parameter id 'GJR' field w_gjahr.   "i_faglflexa_clear-gjahr.
      call transaction 'FB03' and skip first screen.
endcase.
endform.                    "user_command
Regards,
Maverick

Double click to open in CS4.. with CS5 installed

In my experience, if you have had say, InDesign CS4 and InDesign CS3 installed, as long as you had CS3 open and double clicked a file that was indeed created and saved via CS3, that it would open in CS3.
However, even if I save a file just created in CS4, and even with InDesign CS4 open (CS5 is not launched), CS5 will launch and open the file if I double click the CS4 file.
Is this normal?!
Thank you...

I was just wondering WHY, as this is most certainly NOT how it used to be. I can recreate the scenario where it worked above (CS3, CS4) all day long.
Thank you for the confirmation, but would love to know what changed. This is a step backwards, and want to know who to blame. ;-)
Thank you.

ITunes double click problem (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?
(sorry about the double post - first time @ the discussion pages)

i'm having this same problem, but the "auto" double-clicking happens in mac mail. i've checked mouse settings, i've rebooted, but nothing seems to help. whenever i switch into mail, my first click is always treated as a double-click. (very annoying, since it usually opens a message into an unwanted window.)
another mouse-related problem: sometimes my mac seems to be swallowing mouse clicks. (not in mail, though! maybe that's where all those lost clicks are going! <g>) my mac acts as if i am clicking on a dead zone (that is, a region that doesn't accept clicks). i can click on the region all day (e.g. a tab in safari) and nothing will happen. if i, however, click on something else (even, say, just the background of a web page), the go back to the area that was dead moments before (that tab, e.g.), suddenly it accepts the click.
any ideas?

Open Dialog double-clicking problems.

Here's a head-scratcher...
Recently in almost any Open Dialog box, when I double-click a folder on my server it will turn the arrow down and list the contents rather than opening that directory. Then when I save, it doesn't save it in the intended directory. Strange. I can't seem to figure out why.
The real strange part is that it happens in all my non-Apple applications only (e.g. illustrator, bbedit, Word), but Apple apps behave normally (e.g. Preview, Safari). Also, it ONLY occurs when I try to access folders on my server (Linux using Clark Connect) where my HD and external HD behave perfectly fine.
The other strange thing is I've tried this on another mac on the network and my PowerBook, but, surprise, it all works fine on those machines -- so it's just my G5. I tried trashing finder pref but no joy.
I can work around this by doing a lot of command-downarrow's in those dialog boxes, but I'd prefer to have it the way it was
Can anyone shed some light on this strange phenomenon? I can't find any threads anywhere that has this same problem. Thanks in advance.
G5 Tower Dual 2.5 Mac OS X (10.4.8)

Huh.
I've recently started having the same mysterious annoyance. Except the afflicted folders are on an external (firewire) drive, not a server...
Similarly, it's not occurring with Apple apps, as far as I know.
What's perhaps oddest of all, some folders on this volume are functioning normally, while others aren't.
I had been using Default Folder X, but this happens even when that's disabled, erased, freshly installed, etc. In certain apps, clicking on the current folder name in the open/save dialog initiates a crash (seems related to the interface itself).
I've repaired the disk, permissions, trashed all related preferences, etc. Everything checked out okay.
One final clue, perhaps related or not: I've been finding duplicated folder names nested in the 'Volumes' path subordinate to my primary disk. These are probably supposed to be hidden. But I haven't deleted or otherwise tinkered with them. They do not contain the identical items of the 'real' volume (much fewer folders, documents, etc.) but there they are, acting somewhat like imposters.
Like ookla says, a head-scratcher. I'm gonna upgrade to latest flava of OS and see if it helps; I'll let y'all know.
Good luck!
G4 Powerbook, G4 Tower Mac OS X (10.4.3)

Flash wmode=transparent double-click problem in IE

Hi,
I've discovered a strange problem with flash content using
wmode=transparent in IE - when someone double click the flash the
whole movie TURNS BLUE (!)
For example you can see this behaviour in action at
http://www.stella-artois.cz
- I implemented there IE active content fix (as described at
http://www.macromedia.com/go/7c29e252)
and ended up with this.
Well, as far as I can say there are people who double-click
on everything, so I'd really like to fix it.
Would anybody know how to do that?
Thanks a lot!

Sometimes it is just a trial and error. The main thing is since I'm not working with your files, I have to mimic your scenario as best I can. Make sure you give it exact positions when stacking actual videos or swf files to force them to overlap. I tested this first with just a swf file and now the example is swapped to stack to youtube embeds as examples.
It really shouldn't matter if it is a dropdown or what type of activity, as long as you have the stacking correct. You can also, generally set the one in back to opaque. I updated the code snippet because this one seemed to read better.
<html>
<head>
</head>
<body>
          <div id="background" style="position:absolute; left:0px; top:0px; z-index:-50">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="650px" height="750px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
          </div>
          <div id="myDiv" style="position:absolute; left:0px; top:0px; z-index:1000;">
          <iframe title="YouTube video player" frameborder="0" allowfullscreen="true" allowtransparency="true" width="500px" height="500px" src="http://www.youtube.com/embed/FOHJUrcVdJk?amp;wmode=transparent"></iframe>
</div>
<body>
</html>

Double click problem in iTunes (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?

Hi,
transaction VA23 is for Quotations..
so in your select query write...
select vbeln
         erdat ........
          from vbak into corresponding fields of table <table name>
          *where vbtyp eq 'B'*. (Document type for Quotation)
Then it works.
Regards,
Sathish Reddy.

Problems with Premiere CS4 video

Just purchased Premiere CS4. When I import video (avi or mpeg), what appears in the preview monitor or the timeline monitor is greatly distorted. Audio is great, it's just the video that I'm having trouble with. Running it on XP with 3.4 GB of memory. Any advise would be greatly appreciated.

So would some information. AVI and MPEG mean nothing, they are just containers that can hold anything from scrap metal, toxic chemicals, food, clothing, electronics, spare car parts, tapestry or God knows what. Unfortunately PR can only handle certain contents, so you need to know what codec is used.
Look here and answer at least the 16 questions at the end of the Wiki article: Some suggestions

Erratic mouse double-click problem (OS or Motherboard?)

I have a MacBook
MacBook4,1 / Intel Core 2 Duo 2,4 GHz (2Gb RAM)
I have two mice: Microsoft Wireless Mobile Mouse 3000 v2.0 (bough lately) and a Logitech M-BT-96a (simple 2 buttons with wheel)
I don't know if it is after upgrading to Snow Leopard (10.6.8) but one or the other are causing unwanted double-clicks!
I downloaded Lion but didn't install yet.
The trackpad act also funny especialy with touching to create clicks and double-clicks. I tough first it was because I press to heavely on each side of the trackpad… I changed my position: Same thing.
I have two USB hubs daisy chained. Even when I'm unplugging them… It does the same thing.
Thanks for your help

As best as I can recall, my original eMac mouse lasted maybe a year before both the mouse tracking and the button contact switch began to act erratically. The button contact can wear out. If you still have your original eMac mouse, you've done an amazing job of treating it gently (maybe you can give me lessons --- I end up replacing mice every 2 years or so!).
Can you try another USB mouse? Any third-party three button USB mouse will work as a basic three-button mouse without needing any additional software to be loaded; e.g., the Logitech Prefernce Pane offers more control over features of their mice, but you can do without it and just plug the mouse in.

Double-click problem on JList items

I wrote codes in double-click function on JList selected items and used the codes below (the same as those in the Java1.3 document).But I find sometimes the code can't catch the mouseClicked event and do nothing at all. Is there any other trick to implement the function properly? Thanks a lot!
final JList list = new JList(dataModel);
MouseListener mouseListener = new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
int index = list.locationToIndex(e.getPoint());
System.out.println("Double clicked on Item " + index);
list.addMouseListener(mouseListener);

Hi Amjad,
instead of adding the doubleclick-event on every list item, you can just check which item was clicked in the dobuleclick-event of the list-box.
In the mentioned example, you can replace the ondblclick listener with the following:
oSimpleListBox.ondblclick = function(e){
alert(e.target.innerHTML)
This will output the text of the clicked list item
Greets,
ben

AVC Playback problem in Premiere CS4

Hi Everyone,
I recently graduated from college and am trying my hand at being a freelance videographer. Before now I've just used my small camcorder for all of my projects, but I wanted to move up to working in HD. So I just bought a brand new HD camera and was really excited to start using it.
I got a few shots, downloaded them onto my computer from the camera chip, and tried to import them in Adobe Premiere Pro CS4. The files imported fine, but when they playback on the source monitor and the program monitor (after I drag it into the timeline) the pixels are jittery, in the wrong position, and sometimes playing backwards. It makes the footage look fuzzy and chunky, and it's really distracting when I go to edit. How do I fix this?
The footage is fine when I play it with Windows Media player.
I thought maybe I choose the wrong preset when I opened a new sequence, but I've tried changing that to multiple different settings and nothing changed. Most of the settings I tried were AVC-Intra & AVCHD.
It looked like a few people were having similar problems, but with different circumstances as mine. And I couldn't tell if they were able to fix the problem yet. I really want to be able to use this new camera for my upcoming projects and I was hoping someone could help.
Here are the specs on my Software, Camera, & Computer:
SOFTWARE:
                Adobe Premiere Pro CS4
CAMERA:
                Panasonic AVCCAM
                Model# AG-HMC150P
                Recording Formats:         PH 1080/60i
                                                        PH 1080/30P
                                                        PH 1080/24P
                                                        PH 720/60P
                                                        PH 720/30P
                                                        PH 720/24P
                                                        HA 1080/60i
                                                        HG 1080/60i
                                                        HE 1080/60i
                Chip: 32 GB SanDisk Extreme (30MB/s)
COMPUTER:
                Asus Essentio CG5290-BP007
                64-bit OS - 9 GB RAM
                Graphics Card: NVIDIA GeForce GTX 260
                Free Upgrade from Vista to Windows 7
Thank you for your help!

What is your hard drive setup?
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

Major problems with Premiere CS4

Hello there!
I'm having major problems with CS4. I recently bought a new computer - essentials are as follows:
Intel Core i7 920 2.66GHz
2 x Kingston 3x2GB, DDR3 1333MHz (=12 GB RAM)
Ati Radeon HD 5770 v2
Asus P6T SE, LGA1366, X58, DDR3, ATX
2 x 500GB, Barracuda 7200.12 (RAID1), system disk
2 x 1TB Barracuda 7200.12, media disks
Windows 7 Pro 64 bit
Adobe CS4 Production Premium + latest updates
The problem I have has mostly to do with Premiere although I think the rest of Production Premium softwares should be running better on this computer as well.
For starters, I was highly disappointed when I couldn't view a single HD clip from the Premiere timeline (it was an .m2ts rip from a previously self-burned Bluray disc) at all. Rendering is very slow and even after that the video doesn't run normally, showing just a few individual frames per second. When I point the timeline at a certain spot, it takes many seconds until even that very frame is shown in the monitor window.
And this is not all - I decided to try with a basic DV AVI clip, previously captured with my PPro 1.5 on my earlier computer (3.2ghz Pentium from 2005). It's a native file so it doesn't even need rendering and still the same problem occurs. With normal playback only about 6-10 frames are shown per second. It's absolutely ridiculous - even my 2004 laptop runs DV AVIs more smoothly with PPro 1.5.
While I'm running the Premiere, the level of used RAM comes only up to around 24 percents. The processor, then again, comes close to a hundred when play is pressed on the timeline.
I haven't had such immense problems with other Production Premium softwares (though as I said, I think they should be running faster as well). Otherwise the computer is running smoothly.
A friend of mine pointed out that the graphics card I'm using isn't on the Adobe website's list of supported ones with Premiere, but afaik it shouldn't even be a graphics card problem with this high-end machinery.
So - I sure could use some help and ideas about how to get the Premiere working. My main intention for buying a new computer and Adobe CS4 Production Premium was to start HD editing after all! Thanks beforehand!

Hi
Yeah, I hope he solves problem and knows how it got solved and tells us all...it's like being a detective ! " Mr Plum did it in the "svchost" room ! "
I got a little lost on this....
You are welcome and I'm glad that it paid off so nicely for you. One more suggestion, if I may: I'm a big fan of a fixed pagefile size. When making a fresh install of Windows, one of my first actions is to set a fixed pagefile on a different disk (min=max) before installing anything else on that different disk and removing the pagefile on the C drive. This will ensure that the pagefile in on the fastest part of the drive and will never be fragmented.
I think it used to be that I made swapfiles, or swapdisks which now seems to be called pagefile. That in itself is a little confusing semantic wise, because of the use of mempage stuff. It used to be that base memory was 640k, with the upper memory (to make up 1024 kb) was mostly for drivers and stuff. If more memory was needed than 640k (an event the inventor never thought possible... "who could want more than the enormous amount of 640K ?", he said..)..the extended and expanded memory got invented to swap memory pages from that 640k as needed with the rest of RAM. That's basically correct right ? Sooooo, I don't know if that still goes on, but I suspect it does, unless someone totally changes the architecture of the computer and cpu and fsb and everything... but I don't know what is going on nowadays. Anyway, there were other ways besides windows OS to create virtual memory on the hard drive, and Photoshop was one of the programs that could do that, I think.
Why MS would want to call the swapdisk virtual memory "pagefile" is beyond me.
Anyway, be that as it may, I understand that making the pagefile first on a drive so it's close to the center of the drive (heads don't have to travel far to access). But I haven't added a lot of drives to a system before, and I suspect I will be pretty soon...and this is the part I don't get...
You add drives and put OS on them? So they are bootable ? I've added a drive or two but just formatted and used as more storage but didn't put OS on them. So that part is confusing...
Then you take the pagefile off the C: drive ? Are you then using the new drive as your boot drive and the C: drive is too full to use accept to run the programs already installed ?
Thanks again !
Rod

Double click problem

Hi all,
I've got a problem using JSF (myfaces) and command links. When link is clicked several times quickly, the same page is shown and no response is genered. I think that exception is thrown during subsequent requests to same link, is there a way to ignore all clicks on same link after user clicks at the first time?
This has been probably already discussed, are there easy solutions?
Thanks,
Andrey.

Since the last post, I've run hardware test and came up with no problems. I also used another mouse with no difference in response. It does work with control click though. Re-installing Leopard.
Gary

Problem export premiere cs4

Hi everybody, I have a problem and I hope you can help me. I have a cs4 project in HDV 50i, 1440x1080 and aspect ratio 1.333
When I do the export in Mpg2 Pal 720x576 in 16:9, its aspect ratio changes in 1.459 creating two black strips on the sides.
How can I do my export preserving the original ratio, the 1.333 one?
Thanks
Damiano

Go to the export settings. In the source tab in the left top corner press crop and add 13pix for the bottom and top.

Double click problem in Premiere CS4

Similar Messages

Maybe you are looking for