Double Click to expand - Black Screen
Last Thursday the hard drive crashed on my mini. Took it to Apple Authorized repair and installed new hard drive plus installed Snow Leopard again and supposedly installed iPhoto 9. Started first boot and told unit to update data from Time Machine. All went well, except when I double click any picture to expand I get a black screen. I tried rebuilding the library via holding down command & option keys, creating new library with iPhoto Library Manager, copying iPhoto Library from working clone drive to new drive and deleting iPhoto Cache and Preference files and nothing works. I am ready to erase the drive again and use my cloned drive to make a clone on the new drive and use time machine to update from there. Does anyone have any other suggestions before I go this route?
Yes, re-install the OS, but not from the Clone.
There are several reasons why this occurs and one of them is a damaged QuickTime installation. (QuickTime is the technology that supports all the multimedia on your Mac.) As the othe rfixes haven't worked it looks like you have the QuickTime issue.
Regards
TD
Similar Messages
-
Double-Click on photo = Black Screen
I have some high quality (for me) photos that came from a professional wedding photographer. They are about 4mb a piece. In iPhoto 08 I had no problem with them. I could move them around, print, do whatever I needed.
With iPhoto 09... when I double-click on them to bring them up to the larger size so that I can see greater detail and edit them... the picture goes to black.
Any clue as to what is going on?? My wife is going to kill me if she can't get to her wedding pictures easily!Hi Guys,
I have read with interest all your posts on this issue but unfortunately, for all your suggestions my problem is not resolved. I have done the following:
1. Rebuilt the iPhoto Library (both the small thumbnails, all thumbnails and file permissions)
2. Examined the version of 'AppleAppSupport.framework' which is at 1.5 in my machine
3. Downloaded and reinstalled 'Mac OS X 10.5.6 Combo Update'
4. Examined the Console log to determine if any error messages appear when I double-click a photo (there are none)
5. Examined the color-profile and other properties of some photos which exhibit the problem (they are the same as the other photos in the event taken with the same camera)
6. I even tried editing the photo (which is the only time I can see it) and saving it but with no change
I hope that someone here can shed some light on this most strange issue which only started after upgrade to iLife '09.
Regards,
Michael -
why do I have a black sreen when I try to watch a youtube video. I have sound but no video and if I click on the black screen firefox crashes.
Also update firefox to version 23, you are currently on Firefox 3.6.
* [[Update Firefox to the latest version]] -
Determining Tables on Double Click Event on Split Screen
Hi,
I have an OO split screen scenario where I display 2 different internal tables, 1 in the upper section of the split screen and the other in the lower section part. The layout structure used is the same for both internal tables since they display similar information. I am trying to establish that if I use the double click event to drill into specific line items, how do I determine which one of the split screens (and hence which internal table) have I double clicked on so that the correct internal tables details is read for further processing?
ThanksHi Uwe,
Thanks very much for this. I have tried this out and it works perfect. However I'm trying to understand this further from the point of view that I did originally look at the event DOUBLE_CLICK in the class CL_GUI_ALV_GRID but didn't think I could use if further since there was no tie in with the optional parameter 'SENDER' you show. It only has 3 parameters listed for this so how does the 'SENDER' optional parameter work? Is this by reference/registration via the SET HANDLER statrement? I also debugged and looked at 'value' passed into the SENDER optional parameter... its not what I expected to see but contains what looked like the whole class object? Apologies but I'm coming more from years in the trenches of "classical" ABAP and seeing the light with ABAP OO!!
Appreciate all your assistance.
Thanks -
Have to double click to move from screen to screen
hi
having trouble getting rid of the man telling me what i am doing as i am doing it. also have to double click if i need to
move to another screen/
can anyone help pleaseHi janfromliverpool,
It sounds as if you have Voiceover enabled on your iPhone. You can turn it off by going to Settings > General > Accessibility > Voiceover. See this page -
Use Accessibility features in iOS - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Firefox crashes every time I double click on the web screen
Okay, this may sound funny and I've tried searching the web to no avail. I've just recently upgraded my Firefox and so far it's working...until when I double-clicked on the web page (the fast way to block a whole paragraph to be copied). The Firefox then suddenly crashed. First I thought there might be a web page which caused the problem, but when I experimented double-clicking on the Firefox Homepage, the problem persisted. This hasn't happened before and I have no idea what error does the double-click induces. The other processes---downloading, uploading, etc.---works fine. Maybe you guys will find it minor, but still it annoys me every time I forget and double-click.
== Crash ID(s) ==
bp-37c72e77-c637-4ff1-8c22-0b73d2100707You have or had an extension installed (MegaUpload toolbar) that has changed the user agent from Firefox/3.6.7 to Firefox/3.5.3.
You can see the Firefox version at the top and the user agent at bottom of the "Help > About" window (Mac: Firefox > About Mozilla Firefox).
You can check the '''general.useragent''' prefs on the '''about:config''' page.
You can open the ''about:config'' page via the location bar, just like you open a website.
Filter: '''general.useragent'''
If ''general.useragent'' prefs are bold (user set) then you can right-click that pref and choose ''Reset''.
See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
Black screen when I go to Email.
What's up with that?There is another thread that I just used to fix this problem. While on the black screen, hold the sleep and the home button at the same time. The next screen that shows up gives you two options, ignore them until they disappear and the apple symbol shows up on the screen. release the two buttons and wait. This will force close the email, but will not harm or erase any data on your phone
-
Regarding exec of a report based on double click action o sel-screen field
Hi folks!
I want to execute my report program when i select
some action from selection screen field using f4 help of that field.Now instead of clicking on the execution button,i want my report to get executed when i select some action from the selection-screen field.Please provide
me with some suggestions.All the helpful suggestions will be rewarded.Hoping helpful suggestion from all sap gurus.
Thanks & Regards,
raghav.Hi,
try below logic
at selection-screen on ON VALUE-REQUEST FOR
psel_low_high
leave to list-processing
or
submit ztest and return.
Regards
amole -
MacBook Pro won't start at all - clicking noise with black screen
Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.
You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
It's ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
Could someone please help with a step by step for dummies to rectify this.
With these settings it does not raise that alert for me.
-
Iphoto 9.2.1 thumbnails go black when double clicked on
I am running iPhots 9.2.1 on Snow leopard 10.6.8. When I double click on the thumbnail to edit the photo the screen goes black. Double clicking in the black goes back to the thumbnail original. Also it runs very slow on my Mac Book Pro INtel, 2006 version.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Is there a way to disable the double-click-to-expand-
node feature? This seems to be a default behaviour,
wish to remove it. Thanks in advance.I use forms6i patch 12. And that is what I have:
Block 'TREE'
Triggers
WHEN-MOUSE-DOUBLECLICK
begin
:global.MDC := 1;
Message ('1', Acknowledge);
Pause;
end;
Tree_Item
WHEN-TREE-NODE-EXPANDED
begin
Message ('2', Acknowledge);
Pause;
if :global.MDC = 1 then
:global.MDC := 0;
Return;
else
FillLevel; --(e.g. fill the lower nodes and
-- expand the parent node)
end if;
end;
And that is what I get at runtime after double clicking on a collapsed node:
1 (acknowledge)
2 (acknowledge)
So WHEN-MOUSE-DOUBLECLICK fires prior to WHEN-TREE-NODE-EXPANDED in my environment.
Sergey. -
I am new to apple and found that the double click on my MacBook air is not working so stuck on one screen and can not move. Is there another way other than double clicking to move between screens? Do you think this is a fault or just that the settings have been changed
Thank youIt is probably set too fast or too slow. Go to System Preferences from the Apple menu. Click on trackpad and adjust the double-click speed here.
-
Is there any way I can remove the default double click behaviour for a node in a JTree? Currently it expands or collapses the node, but I want it to do something else. I have set a listener up so it can do the new task, but I want to remove the expand/collapse behaviour as well.
But it isn't....
With the TreeWillExpandListener I cannot distinguish between the two expansion methods.
However, I have found another, extremely simple way of doing what I want, using the JTree.setToggleClickCount(int) method. This sets the number of clicks needed to expand the node (but does not affect clicking on the + box). By setting this to a high number, I can prevent double clicks from expanding nodes, thus allowing my own double click listener to do the stuff I need. -
Reg.Double click concept in classes
Hello,
I had developed a program which is extracting data from kna1 and vbak table.Now i am facing a problem when iam using a concept called doubleclick.In my first screen data from kna1 table is displayed.Now i want to see respective data from vbak table when i double click one particular custnumber.How can i use concept doubleclick for that.can anybody explain me in detail.Hello Priyanka
The sample report ZUS_SDN_TWO_ALV_GRIDS_0 shows how to display sales orders per customer using two ALV grids.
*& Report ZUS_SDN_TWO_ALV_GRIDS_0
*& Description: Display KNA1 in 1st ALV grid,
*& select VBAK data by double-clicking
*& SDN: Reg.Double click concept in classes
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
REPORT zus_sdn_two_alv_grids.
DATA:
gd_repid TYPE syrepid,
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
DATA:
gs_knb1 TYPE knb1,
gt_header TYPE STANDARD TABLE OF kna1,
gt_position TYPE STANDARD TABLE OF vbak.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_customer TYPE kunnr READ-ONLY.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
define local data
DATA:
ls_header LIKE LINE OF gt_header.
CHECK ( sender = go_grid1 ).
READ TABLE gt_header INTO ls_header INDEX e_row-index.
CHECK ( ls_header-kunnr IS NOT INITIAL ).
md_customer = ls_header-kunnr.
Triggers PAI of the dynpro with the specified ok-code
cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not 4.6c
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DETAIL'
IMPORTING
RC =
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM kna1 INTO TABLE gt_header UP TO 500 ROWS.
Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking->set_extension
EXPORTING
extension = 99999 " full-screen
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 2
columns = 1
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'KNA1'
is_layout = gs_layout
CHANGING
it_outtab = gt_header
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Sales Order per Customer'.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
is_layout = gs_layout
CHANGING
it_outtab = gt_position " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
User has pushed button "Display Details"
WHEN 'DETAIL'.
PERFORM entry_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ENTRY_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM entry_show_details .
define local data
DATA:
ld_title TYPE lvc_title.
SELECT * FROM vbak INTO TABLE gt_position
WHERE kunnr = lcl_eventhandler=>md_customer. " Sold-to-party
CONCATENATE 'Sales Order of customer' lcl_eventhandler=>md_customer
INTO ld_title
SEPARATED BY space.
CALL METHOD go_grid2->set_gridtitle
EXPORTING
i_gridtitle = ld_title.
ENDFORM. " ENTRY_SHOW_DETAILS
Regards
Uwe
Maybe you are looking for
-
How can I make hyperlinks work from a Flash/SWF presentation?
How do you make hyperlinks/buttons work in Flash/SWF Captivate 5.5 presentations? This did not seem to be an issue with Version 4. I cannot publish to video (i.e. mp4) or as an executable file for posting on our internal system. If it cannot be done
-
Calendar Server Proxy possible ?
Hi, Is there a way to proxify Calendar Server as MMP with Messaging Server ? Calendar Server 6.x Best regards. Jo
-
Dreamweaver and PHPFox? [subject edited by moderator]
Hello!i d like to know how can i edit the layout with dreamweaver if ii use PHPFox Some 1 can help me?
-
Documentation on Implementation of Project
Hello friends. I am going to involve in an implementation project. So can anybody send a file consisting of all documentation procedures to be followed in an implementation project from the day 1 to end? My mail id is [email protected], [email protec
-
Are there compatibility problems with PS CC and Windows 8?
Brand new computer - just installed PS CC and Bridge - opened a project with many layers - highlighted one layer - worked on it - went to work on another layer, and the first one remained highlighted?? Now there are two layers highlighted - waited a