Double clicking an image in Browser view

I see that the behavior for double clicking an image in Browser view has changed between Aperture 2 & 3. In version 2, double clicking an image would jump from Browser view to zoom in on that image in full screen mode. Now in version 3, double clicking just switches to that image in Viewer mode in the main window, without entering into full screen mode.
While I guess this change makes some sense given the changes to full screen mode in v.3, my old fingers have gotten used to doing things the old way. To recreate what I used to do in v.2 I need to double click, then hit 'F' to do to full screen mode and then do the reverse to get back where I started.
Is there anyway I can change this behavior to the old v.2 way? I see lots of ways to customize hotkeys and commands, but nothing to change behaviors for a double click.
Thanks!

I can't find anything, but I'm still finding my way around!
I don't think you need to double click and press F..... just pressing F should change views.
Another way is to drag the "Full Screen" icon into the toolbar, and you can just click that.

Similar Messages

Rotated images in browser view but correct in viewer

Aperture 3. In numerous projects when looking at images in browser view some (not all) of the images are rotated incorrectly and some look as though they have been stretched. If I click on one of these images it opensin the viewer mode rotated correctly. Why is this happening and how do i fix it? Many thanks

Preview uses the testing server. When you say it doesn't work what happens?

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Why when I double click an image in "pictures" does it always open into Elements 10 ?

Why when I double click an image in "pictures" does it always open into Elements 10?

Only if you set Elements as the default application e.g. for opening all jpeg files.
You can make file associations via the control panel.

Double-click on clips in Browser imports directly to Timeline not Viewer

It's been awhile since I have posted any Mac issues, so here goes:
I have a clip that I imported into Final Cut Express (FCE), which went OK. I then divided it up into subclips, and went to bed. Now that I have opened FCE again, my Viewer is gone (though the Viewer slug is there), and double-clicking on any of my subclips in the Browser takes my directly to a tab in the Timeline, instead of the Viewer.
I have never seen this happen before, and I have played around with the settings, but could not find anything that will turn this maddening behavior off though I do get the feeling that this is nothing more that something being turned on (or off) that shouldn't be.
That being said, if there's a way to reset FCE to its default settings, which I suspect would solve the problem, I would appreciate knowing it.
If I wasn't clear before, I am trying to get back to the place were double-clicking on a subclip in the Browser takes me not to an individual tab in the Timeline, but a Viewer window. Then, if I want to move the clip to the Timeline, then I would do so, and have the clip in the Timeline show in my Browser window.
All help is, of course, appreciated.

I think I solved the problem (sort of). The clip I am using was imported from iMovie 09, after I changed it to a XML file. For some reason this type of file doesn't seem to act the same as a QuickTime file imported into Final Cut Express, which opens up a Viewer window automatically upon a double-click on the clip in the Browser.
This doesn't quite make sense to me as to why a XML file would act in such a fashion, though I had no trouble opening a Viewer when I imported a QuickTime file into FCE.
I will try opening up the file in iMovie 09 (which I cannot stand. If iMovie 06 had the functionality–converting to XML files–I would stick with that)
The XML file seems to bypass the Viewer entirely, and open in the Browser and the TimeLine.
Strange, though it does lead me to search under importing iMovie 09 XML files into Final Cut Express.
Thanks for the assistance.

Metadata ON image in browser view?

i have been finding an issue in deleting duplicate images which i am doing manually and i am wondering if anyone can help with this. since these duplicates are the same /image/ but may not have the same name or the same resolution i do the following (i keep the one with the highest resolution)
first i start in a browser view that lets me see all the images and then i do a manual sort to put the same images next to the same images. now the problem starts.
in order to /see/ the metadata such as image size and file size i have to go into List view where i can see this information. then when i find the smaller of the two images i want to delete this one but since the image is so small in list view (and since i can't click to open it) i have to go back to browser view to see the image. then i go back to list view to delete it.
since all the images look the same in list view (and since my images are not named the same) i sometimes use a black placeholder image which i move around and put between sets of duplicates while in browser view so that when i go back to list view i can make sure to see that the next two images are in fact the dupes of each other - to make sure i am not deleting a small image that is actually the only version of an image/file in my database. i mean, since i can't SEE this image in list view it is almost impossible for me to know which image it is in reality and deleting it without going back into browser view seems like an especially bad idea.
is there a solution to this that might involve enlarging the THUMBNAILS IN LIST VIEW or being able to see image size and file size in BROWSER VIEW without it being too messy?
TIA for any help.
- jon

i sometimes use a black placeholder image which i move around and put between sets of duplicates while in browser view so that when i go back to list view i can make sure to see that the next two images are in fact the dupes of each other - to make sure i am not deleting a small image that is actually the only version of an image/file in my database.
One more suggestion, Jon. Have you considered to stack the duplicates in browser view? This way stacked images will be grouped in list view, and you can easily tell, which images belong to the same set of duplicates, for example: Three similar images stacked - you can disclose them by pressing the disclosur triangle and compare the file sizes. The stacked images will be indented in the list.
Regards
Léonie

Double-clicking on Sender name to view full contact card

Just upgraded to Outlook 2013 with Lync 2013, and so far I hate it. In Outlook 2007, when I opened an email I could double-click on the sender's name and pull up its full contact card with all of the information that I had entered before, including
their picture or company logo. Now in the 2013 version, I get some light-weight pop-up showing some of the sender's info and either no picture or the picture that they included in Lync. Is there any way of restoring the full contact card? Also,
is there any way to get the Reading Pane to show by default the picture that I assigned to that contact?

Hi,
When I click on the sender's name in an email, it opens the Outlook Properties dialog instead of the full contact editing form.
If you want to open the full Contact Form in Outlook 2013, you can click on the View Source link of the Contact Card, and click the source
Outlook (Contacts, your email address):
For more information, please refer:
http://www.msoutlook.info/question/727
Regards,
Steve Fan
TechNet Community Support

Change preferences for double click on images in Bridge

Hiya,
I feel a bit silly for asking this because it seems so obvious, but the onvious way just doesn't seem to work for me.
When double-clicking on an image in Bridge, it opens Photoshop - which I suppose in some cases helps, but drives me crazy because it slows the system down so much. I want it to open Camera Raw 6 or just have a bigger preview of the photo.
I tried Edit/Preferences: Under General I ticked the option that double clicks edits camera raw settings
and under file associations I tried to associate jpg files with something other than photoshop but Camera Raw 6.0 is not offered to me there and I can't find the path that leads to it. What is the path? Or is there a different way?
Thanks so much!!
(Oh and another question, when when you filter for two keywords, you get all files that have either one or the other, how can I make them only show the ones that have both???)

Don't think you could get a jpeg to open in camera raw with a double click as that is not the normal route, like it is with a raw image. If you right click on the image you have the option to open in camera raw.
If you do a search with 2 keywords it you only want images that have both you have to click if all criteria met in the match drop down box.

ICal 5.0 double click in date box (month view) doesn't create 1 hour long event anymore

Double-clicking in a date box in the "month" view used to create a new one hour long event.
Now, in 5.0 it creates an all-day event by default, and removing "all-day" results in a 6 hour long event. Anyone know how to get it back to the "old" way? really annoying to have to change it each and every time! Thanks.

Lisa,
Here are some of the iCal event creation rules which may help you:
Enter a name, date, and time duration for the event, and then press Return.
For example, you can enter “Super Bowl Party Feb 6,” “Movie with Rebecca on Friday at 7pm,” “Soccer Game on Saturday from 11am-1pm,” or “Breakfast with Jon,” and then press Return.
If you don’t enter a time duration for the event, iCal sets the event’s duration to 1 hour.
If you don’t enter any time information for the event, iCal makes the event an all-day event.
If you enter “breakfast” or “morning,” iCal sets the event to start at 9 a.m.
If you enter “lunch “ or “noon,” iCal sets the event to start at 12 p.m.
If you enter “dinner” or “night,” iCal sets the event to start at 8 p.m.

Why can I no longer open a PE image directly in PE 11 by simply double clicking the image?

In contrast to previous versions, for whatever reason, I cannot open a PhotoShop Elements image directly by simply 'double clicking' on the image. When I do this with PE 11, PE 11 opens blank and I then have to go to the Open menu and find the image I want to open (the very image I 'clicked' on in the first place)? Why this extra time consuming step?
Thanks,
Dale

Thanks for the reply.
However, I don't understand your answer.
To refresh my memory, I just now selected a jpg. image and opened it with PSE 10. When PSE 10 opened, there was my image, ready to be worked with. However, when I repeated the exact same thing with with PSE 11, PSE 11 opened a blank page and I had to go to the Open menu and reopen my image. I don't understand why this extra step is required with PSE 11.
The screen shot you suggested means nothing to me in post http://forums.adobe.com/message/4876725#4876725 as I've no idea where it comes from or what I'm looking at.
Can you provide further details?
Thanks.

Having to Double-Click Flash Objects in Browser to use

Hello,
Has anyone else experienced the annoying Double-Clicking of
Flash objects in your browser?
In other words, a Flash object will load and play just fine
in my browser, but I have to click it once to activate it then
click again to use buttons.
I'm assuming this might be a security setting for my browser,
but I can't figure it out.
Can anyone assist?

Ok - you really just need to use the search function here -
soon this thread will contain replies
from everyone telling you to search first - because this is
asked literally everyday and often
several times per day - yet, it seems to be the least
searched topic - just google it or search the
forum - been asked and answered several times per day for
months - not flaming, just trying to help
because so often, questions have already been answered here
many times and searching is just plain
quicker.
go here:
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
(it is the google groups archive of this forum)
and type in "active content"
over 1600 returns.
It is the reult of a Eolas vs Microsoft patent lawsuit that
was top web/tech news just a couple
months ago. Tons of resources on it - search google or
adobe.com or microsoft.com.
good luck
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Wallpe70 wrote:
> Hello,
>
> Has anyone else experienced the annoying Double-Clicking
of Flash objects in
> your browser?
>
> In other words, a Flash object will load and play just
fine in my browser, but
> I have to click it once to activate it then click again
to use buttons.
>
> I'm assuming this might be a security setting for my
browser, but I can't
> figure it out.
>
> Can anyone assist?
>

When double-clicking thumbnails, images "mosaic" or "tile"

Since the Snow Leopard Graphics Update, images flash briefly in a jagged "mosaic" or "tile" manner before they convert to full size when double-clicking thumbnails. This happened briefly right after installing the update, then went away after a restart, but now it's back. Running Aperture 3.0.3 on my MBP 2.5GHz with OS 10.6.4.

Thanks for your replies guys. First I don't know happened to the screenshot I posted but here it is again. I hope you guys were/are able to get anything from it.
When I first noticed the issue I backed up my iPhoto library. Next I upgraded to Snow Leopard since this computer was running Leopard. I also upgraded to iPhoto '09 since it was running an older version. Still no fix. I then uninstalled iphoto and its pref files with appzapper and then reinstalled iPhoto '09. Again no luck. I then created a new user account and the same thing happens- no fix.
@Terrance- I opened the app Monolingual and I see that the default languages selected include: Austrailia, Canada, New Zealand, UK, and US English, which I deleted. The Language just "English" is not selected and was not deleted. Could this be it?
Thanks again. I will look into the links you provided, Madison and will be back to report with points.

My MacBook pro has been running slow lately. It's not much about the internet, I mean slow in loading things like apps and pictures. When I double click an image on my desktop it takes forever to load it up. Help?

I would really like to get it back to how it was when I purchased it, every thing loaded up quickly. My friends have the same model as I and theirs run much faster than mine.

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

My desktop icon for firefox when double clicked wont load the browser?

My firefox browser wont load when clicking the desktop icon...i have uninstalled and reinstalled ( i have done this 3 times) and it will work for a day then it doesnt work again. Im at my witts end and im about to go back to IE.

i think i figured it out, at least for now. I installed Adobe reader about a week ago so i could retrieve my w-2's, and i dont think Fire fox liked it. I uninstalled Adobe reader and fire fox and then reinstalled fire fox and all seems to be well again. We will see...Thanks

HT2506 Why does Preview also open previously viewed files when I double click on a file to view it?

Trying to figure out how to stop it from doing this - finding it irritating - or is it a 'feature'?
Already checked the preferences menu, but no luck

Ha! Just figured it out, thanks to checking the discussions - in the System Prefs, under 'General', unchecked 'restore windows when quitting & re-opening apps' & that seems to have done the trick

Double clicking an image in Browser view

Similar Messages

Maybe you are looking for