Double clicking on a region to open it no longer works...

After installing OS 10.8.2 I have problems with Logic 9.1.8. If I double click on a region in the Arrange window, it used to open on the lower part of the Arrange window so I could edit notes, velocity settings etc. Now, when double-clicking, the lower part opens for very short time (0,1 second) and then disappears. I have deleted prefs files, restarted the iMac etc., but nothing helps. - What should i do? Is there any other way to open a region in the lower part of the Arrange window?
I just discovered that I have the same problem when double clicking on instruments. They open for a very short while (0,2 sec) and then close. This means that I can't adjust parameters in the pop-up window (instrument, filter etc.). Very strange. I remember I had this problem some weeks ago, but it disappeared. Not now.

A few ideas..
Have you checked your mouse/trackpad settings in System Preferences.... in case something got messed up there... as it sounds like an input device issue in some ways
Also, check Logic Preferences/General/Editing and make sure that Double Clicking a Midi region Opens... is set to Piano Roll (Even if it is.. try unchecking it.. close prefs.. and recheck it again..)
Finally, you said you had trashed the pref files.. which one(s) did you trash? Did you also trash the CS one too.. as it could be related to a control surface issue.. I mention this because a client of mine had an issue after installing an iPad Controller for Logic... If you have an iPad/iPhone.. make sure the iPad/iPhone is powered off (Not just asleep) and test after that too...

Similar Messages

HT201365 how do I now close apps the old way of double clicking Siri button and touching the app no longer works

how do I now close apps the old way of double clicking Siri button and touching the app no longer works

There isn't currently a way to edit or control which apps appear in the 'open in' list apart from deleting (or deleting and reinstalling) apps - you could try leaving feedback and maybe in the future we'll have some sort of control : http://www.apple.com/feedback/ipad.html

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

I have Thunderbird 24.5.0. When I double click the desktop item to open it up, it opens immediately, but when I'm in the main page with all the folders on the

I have Thunderbird 24.5.0. When I double click the desktop item to open it up, it opens immediately, but when I'm in the main page with all the folders on the left & the corresponding email details on the right of that same page, it seems to have problems. Before, when I would highlight a certain box / folder (whether it would b “inbox”, “sent” folder, “trash” folder, or whatever, it takes a good 5 min (minimum) to open that certain folder so I can see the emails of that folder.
Can u help me determine what is causing this? Just 3 days ago, it was fine.
Thank you

What is your anti-virus software?

When i double click the main button, the open icons come up but no minus sign to shut them off -- any ideas? thanks

when i double click the main button, the open icons come up but no minus

You have to tap and hold them until they jiggle to see the minus sign.

HT2500 When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message? I have to double click the latest message to open it and then reply. Am I missing a setting t

When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message? I have to double click the latest message to open it and then reply. I find this irritating and would like to skip this step and be able to reply from preview and include that message. Am I missing a setting to fix this?

I have found that if you have highlighted some text in the message and then hit reply, the highlighted section is the only bit included in the reply. You need to click on the message in the middle list rather than the preview pain on the righthand side and it should reply normally. To check it's doing this, select a message in the middle section of the screnn then use the down arrow to drop to the next message. Hit reply, and it should reply normally. I hope this helps.

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

Greetings ascnephew8,
It seems your trackpad isn't working as you expect it to. Have you reviewed the trackpad settings in System Preferences? The following article provides trackpad setting details which may help:
OS X Mountain Lion: Change the way your trackpad works
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Suddenly my double click both on track pad and mouse is not working

suddenly my double click both on track pad and mouse is not working.in System Preferences,track pad, i have ticked and unticked the Tap to click several times.Restarted the mac for several times at well but still i do not have double click.help me please.

It might be the double click speed setting.
Look in System Preferences > Universal Access > Mouse & Trackpad tab > Trackpad options.. button > move the double click speed to the slow side of the range.

Double-clicking on midi region(s) doesn't center the playhead - why?

This issue is driving me nuts:
Say I have the playhead parked at bar 20 in the arrange window and want to examine the midi notes on all of my tracks in THAT bar. I have 8 midi tracks. I double-click on a midi region and the piano roll opens in the window at the bottom. Sometimes is shows the playhead parked at bar 20, but most of the time it doesn't: it is way off to the left or right of bar 20. This happens when I examine the remaining 7 midi regions by double-clicking on them as well.
If I can't see the playhead, then I have to mouse and scroll and mouse and scroll to get to see the playhead.
It would be much less time-consuming if every midi region I double-clicked showed the playhead in the center of the piano roll, where I parked it at bar 20. After all, THAT is the measure I am examining on every midi track.
Can Logic do this?

Here is a link to photos showing the problem:
http://glankrudy.smugmug.com/gallery/6838272Ab5QL#6445407666Fdpc
I tried the "set locators" solution which you'll see.
For some strange reason, only the percussion parts are not showing bar 20...

Double-click and drag don't open image files

Hi,
I'm having problems loading images in Preview and Adobe apps (CS1).
From Finder, I can double click to open an image in Preview but it only opens the first image, and won't load more than one. I've tried changing the preferences to "open groups of images in the same window" or "open all images in one window." Neither solve the problem.
My adobe apps won't open a file when I double click it from the finder at all. I have to use the "open" command from within the application to open an image file.
I am a designer and photographer trying to browse groups of images at once and this is driving me crazy! I have tried copying over different preference files from my old computer (a powerbook G4), and I'm wondering if I either failed to copy the right one or copied something that is interfering with the shortcut actions.
The interesting part is, that the same actions are working fine for other kinds of files -- for example, I can open multiple word documents by double clicking their icons in Finder.
Any suggestions appreciated. Thank you.
Amy Hengst

Hi Amy
What kind of files are these? If I wanted to open multiple images in Preview (be they BMP, JPEG, PSD, whatever) I would select them and drag onto the Preview icon in the Dock which opens the first image in a single window with the remaining images in a 'thumbnail drawer' to the right (like you get with big PDF documents).
On the other hand if I double-click, 10 to 1 it would launch Photoshop which I use as an image editor only, not an image manager or viewer. You can of course change the application which any document uses to open it, with the Get Info window. But if you use more than one application (as I do - PS to edit, Preview to just view), then click-and-drag onto the Dock might be your best bet.

When i double click on a folder to open it doesn't open

but when i right click then i push open then it works but lion np

Hey mikey1923,
I would try adjusting the speed of double clicking to see if that helps:
To open the preferences, choose Apple menu > System Preferences, then click Accessibility.
Choose the Mouse & Trackpad option.
Double-click speed: Adjust the mouse or trackpad’s reaction time when you double-click an item.
via: OS X Mavericks: Mouse & Trackpad pane of Accessibility preferences
http://support.apple.com/kb/PH14427
Welcome to Apple Support Communities!
Take care,
Delgadoh

Double clicking an event doesn't open it

My mac mini has iphoto '11 version 9.4.3. and I can't seem to open an event. When I click on it the event is highlighted in yellow and I have a little drop down arrow on the lower right that gives me the option to trash or copy it, but that's it.
On my other macs I can double click an event to see thumbnails, then double click a thumbnail to see the actual photo. I have tried to open photos in events, photo stream, last import, and I have even downloaded photos and can't open them either. I've been through just about every preference setting there is and I'm starting to think I have a broken Iphoto. Suggestions?

Oh, ha, ok! I just tried to change the mouse settings but didn't get anywhere with that. I'm using a Dynex wireless mouse and it seems the only thing I can change is the tracking and double click speed.

Double click on systemtray icon to open application possible?

I developed an AIR application that works in the computer's
background. It opens when the user has received a new message. With
a right mouse click on the system tray icon of the application a
menu appears with "open" and "close" links. My problem is that the
habit of most users is to double click this icon to open the
application, which does not work. My question: Is there any
possibility to attribute an action to a double click event on the
system tray icon?

I'm finding the exact same problem. Adding a listener for '
MouseEvent.CLICK' on the system tray icon seems to work, but
MouseEvent.DOUBLE_CLICK' fails to respond.
Is this 'as designed', or is it a feature we can expect in
future releases?

Double clicking on a region to open it no longer works...

Similar Messages

Maybe you are looking for