Double-clicking on Sender name to view full contact card

Just upgraded to Outlook 2013 with Lync 2013, and so far I hate it.  In Outlook 2007, when I opened an email I could double-click on the sender's name and pull up its full contact card with all of the information that I had entered before, including
their picture or company logo.  Now in the 2013 version, I get some light-weight pop-up showing some of the sender's info and either no picture or the picture that they included in Lync.  Is there any way of restoring the full contact card?  Also,
is there any way to get the Reading Pane to show by default the picture that I assigned to that contact?

Hi,
When I click on the sender's name in an email, it opens the Outlook Properties dialog instead of the full contact editing form.
If you want to open the full Contact Form in Outlook 2013, you can click on the View Source link of the Contact Card, and click the source
Outlook (Contacts, your email address):
For more information, please refer:
http://www.msoutlook.info/question/727
Regards,
Steve Fan
TechNet Community Support

Similar Messages

  • When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

    When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Double clicking an image in Browser view

    I see that the behavior for double clicking an image in Browser view has changed between Aperture 2 & 3. In version 2, double clicking an image would jump from Browser view to zoom in on that image in full screen mode. Now in version 3, double clicking just switches to that image in Viewer mode in the main window, without entering into full screen mode.
    While I guess this change makes some sense given the changes to full screen mode in v.3, my old fingers have gotten used to doing things the old way. To recreate what I used to do in v.2 I need to double click, then hit 'F' to do to full screen mode and then do the reverse to get back where I started.
    Is there anyway I can change this behavior to the old v.2 way? I see lots of ways to customize hotkeys and commands, but nothing to change behaviors for a double click.
    Thanks!

    I can't find anything, but I'm still finding my way around!
    I don't think you need to double click and press F..... just pressing F should change views.
    Another way is to drag the "Full Screen" icon into the toolbar, and you can just click that.

  • I just upgraded to mavericks and now I can't double click on an name from my contacts to address an email.  Did they remove this option?

    Did Apple do away with being able to double click on a name in your contacts and have it automaticly address an email in Mavericks?

    I didn't know that was possible. If the contact had multiple email addresses, what did it do?
    Anyway, another workaround is you can click on the email address label for the person and select Send Email.
    Sorry, it's actually difficult to see what is selected in this screen shot, but hopefully it will be clear enough:

  • When my buddy list comes up, i try to double click my buddies name to start a chat and nothing happens. i could receive instant message but cant start my own or reply. someone please help!

    I have a macbook pro and on accident deleted ichat but reinstalled it using the cd, when my buddy list comes up, i try to double click my buddies name to start a chat and nothing happens. i could receive instant message but cant start my own or reply. someone please help!

    Hi,
    DId you download and Install the COMBO version of the last Update that you did ?
    iChat on the Install Disk is likely to be several versions behind where your OS has been Updated to.
    It needs to Match the OS level.
    iChat Updates come in the OS Updates.
    You need to run the Updater manually as Software Updates keeps records of what it has done and thinks iChat is up to date.
    If you are on Snow Leopard then the COMBO version of 10.6.7 is here
    If you are on Leopard then the COMBO for 10.5.8 is here
    Googling Mac OS X 10.x.x COMBO where x.x is the version you are up to will generally find the link to the right page if you are at a different OS version.
    <
    8:36 PM      Thursday; June 16, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • ICal 5.0 double click in date box (month view) doesn't create 1 hour long event anymore

    Double-clicking in a date box in the "month" view used to create a new one hour long event.
    Now, in 5.0 it creates an all-day event by default, and removing "all-day" results in a 6 hour long event. Anyone know how to get it back to the "old" way? really annoying to have to change it each and every time! Thanks.

    Lisa,
    Here are some of the iCal event creation rules which may help you:
    Enter a name, date, and time duration for the event, and then press Return.
    For example, you can enter “Super Bowl Party Feb 6,” “Movie with Rebecca on Friday at 7pm,” “Soccer Game on Saturday from 11am-1pm,” or “Breakfast with Jon,” and then press Return.
    If you don’t enter a time duration for the event, iCal sets the event’s duration to 1 hour.
    If you don’t enter any time information for the event, iCal makes the event an all-day event.
    If you enter “breakfast” or “morning,” iCal sets the event to start at 9 a.m.
    If you enter “lunch “ or “noon,” iCal sets the event to start at 12 p.m.
    If you enter “dinner” or “night,” iCal sets the event to start at 8 p.m.

  • Double clicking iPhoto thumbnail doesn't load full resolution image.

    After mistaking the new Photo application for iPhoto, I couldn't find the original 206 G iPhoto volume of my pix.  Finally found it but couldn't get the thumbnail images in the application to load the full resolution images after I double clicked them.  Please help.  It's got me scared.  I tried to rebuild after rebooting with Command and Option held down, but no fix in sight.  The thumbnails still refuse to link to the full resolution images.  Help!

    Where is this library stored?

  • Resize tabs only when double click on tab name

    I have this code which resizes tab when it's clicked twice no matter where I click on the tab.
    VBox stackedTitledPanes = createStackedTitledPanes();
       ScrollPane scroll = makeScrollable(stackedTitledPanes);
       final TabPane tabPane = new TabPane();
       final BorderPane mainPane = new BorderPane();
       final Rectangle2D primaryScreenBounds = Screen.getPrimary().getVisualBounds();
      tabPane.setStyle("-fx-font-size: 12pt;"); // Set global size for the font
       // Create Tabs
       Tab tabA = new Tab();
      tabPane.setOnMouseClicked(new EventHandler<MouseEvent>()
       private double sizeX, sizeY;
       private boolean first = true;
       @Override
       public void handle(MouseEvent me)
       if (first)
      sizeX = mainPane.getWidth();
      sizeY = mainPane.getHeight();
      first = false;
       if (me.getButton().equals(MouseButton.PRIMARY) && me.getClickCount() % 2 == 0)
       if (sizeX != mainPane.getWidth() || sizeY != mainPane.getHeight())
      mainPane.setPrefSize(sizeX, sizeY);
       else
      mainPane.setPrefSize(primaryScreenBounds.getWidth(), primaryScreenBounds.getHeight());
      tabA.setText("Main Component");
      tabA.setContextMenu(makeTabContextMenu(tabA, tabPane));  // Set right mouse click menu
       // Add something in Tab
       StackPane tabA_stack = new StackPane();
      tabA_stack.setAlignment(Pos.CENTER);
      tabA_stack.getChildren().add(scroll);
      tabA.setContent(tabA_stack);
      tabPane.getTabs().add(tabA);
       Tab tabB = new Tab();
      tabB.setText("Second Component");
      tabB.setContextMenu(makeTabContextMenu(tabB, tabPane));  // Set right mouse click menu
       // Add something in Tab
       StackPane tabB_stack = new StackPane();
      tabB_stack.setAlignment(Pos.CENTER);
      tabB_stack.getChildren().add(new Label("Label@Tab B"));
      tabB.setContent(tabB_stack);
      tabPane.getTabs().add(tabB);
       Tab tabC = new Tab();
      tabC.setText("Last Component");
      tabC.setContextMenu(makeTabContextMenu(tabC, tabPane));  // Set right mouse click menu
       // Add something in Tab
       StackPane tabC_vBox = new StackPane();
      tabC_vBox.setAlignment(Pos.CENTER);
      tabC_vBox.getChildren().add(new Label("Label@Tab C"));
      tabC.setContent(tabC_vBox);
      tabPane.getTabs().add(tabC);
      mainPane.setCenter(tabPane);
      mainPane.setPrefSize(300, 500);
       //mainPane.setLayoutX(5); // Horizontal Position
      mainPane.setLayoutY(32);   // Vertical Position
      scroll.setPrefSize(395, 580);
      scroll.setLayoutX(5);
      scroll.setLayoutY(32);
    Can you tell me how I can modify the code in a way that I can size the tab only when I double click on a tab name?

    See:
    *https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

  • Double Clicking Photo No Longer Opens in Full Screen

    Hi all:
    We have our preferences in iPhoto set so that double clicking a particular thumbnail opens the photo in Full Screen mode for editing.
    Just this morning, for no apparent reason, we noticed that the photos when double clicked now open with gray (or black, I'll have to look again when I'm back home) space on the sides -- in a sort of "letterbox" effect. The pix still fill the screen from top to bottom like they used to, but they no longer stretch completely to the sides.
    Any idea what has happened? We're thinking it's something easy, perhaps a stray click that unintentionally put us in a different iPhoto mode without us knowing it. (We did recheck our preference setting and "open in full screen" remains selected.)
    Thanks for your help.
    -- JDee

    JDee:
    Try deleting the iPhoto preference file, com.apple.iPhoto.plist from your User/Library/Preferences folder. Launch iPhoto and reset your preferences.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Adding link to the photo and Name in the outlook contact card -Enterprise wide

    How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
    I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
    Appreciate if you can provide details on how this is done. The url will look like this:
    https://www.produrl.com/userid={userid}
    How can I dynamically add respective userid in the link?Appreciate your response on this.

    So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
    beyond what is listed here:
    http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Merge iPhoto name with Address Book contact card?

    I have a lot of pictures named on iPhoto under faces. But then I just put some contacts in my Address Book and I wanted to know if theres a way to merge the Faces name and the Contact Card. Or maybe if I can just rename all of the Faces at once under one person, and change them to the contact card name? P.S. I am currently running Snow Leopard. But i I need Lion for it, I will be biying it tomorrow anyways=) Thanks anyone who helps!:D

    Oh wait! Nevermind! I found I can just rename it! I'm a little new to the Mac:P

  • HT2506 Why does Preview also open previously viewed files when I double click on a file to view it?

    Trying to figure out how to stop it from doing this - finding it irritating - or is it a 'feature'?
    Already checked the preferences menu, but no luck

    Ha! Just figured it out, thanks to checking the discussions - in the System Prefs, under 'General', unchecked 'restore windows when quitting & re-opening apps' & that seems to have done the trick

  • TS2932 Aperture 3.5.1 thumbnail picture shows normal.  When I click on the image to view full screen the filter effect is gone and all images appear really dark and almost blue in tone.  I also have photos that are distorted.  The faces are out of proport

    Thumbnails appear normal.  But the master image is totally wrong...

    No.  Also, There seems to only be one project that is doing this... here's a screen shot of another project that appears normal.

  • Company name not recorded in contact card

    Hi,
    When I edit a contact to add his/her company name, the name is not recorded when I click on the save button.
    It's driving me bananas!
    Any idea what's happening?
    Thanks,
    Sil

    Well, in fact I restarted my Z30 and it seems to work now. (though I need to do some extensive tests)
    But strangely, after the reboot, the two contacts I played with (my bank and my mechanics) had been removed, deleted from the contact list!
    I also lost some other phone numbers for contacts who had two numbers.
    I feel concerned that the contact list doesn't look very reliable...

  • Editing in Photoshop vs Edit view on double-click?

    Recently redoing preferences in iPhoto 4, I was thinking again that it would be nice to have those 2 choices be separately controlled, not alternates. I use Photoshop quite a lot, but not on every photo, and in iPhoto I'm used to the double click giving me the edit view, for browsing, sorting and deleting files.
    In general I like iPhoto better than Bridge for an image browser, with its Mail & print options. And Bridge doesn't do well with over 100 or so images in a folder, while iPhoto will handle 8000 at least.
    Rather than exporting a copy and using Photoshop from there (& that's too much hard drive space), I guess I can go into Preferences and change the setting every time I want to use Photoshop or go back to browsing, but what a nuisance. A different way to open in Photoshop would be much more convenient, leaving the double-click still enabled for edit view. Does anybody know if that's in the more recent versions of iPhoto? Or is there some other way to do this?
    .

    Choose PhotoShop as your preferred external editor in iPhoto preferences, but don't select that radio button. After that, a double click on a thumbnail in iPhoto will open the image in iPhoto; but a control-click (or right-click, if you have a two-button mouse) will bring up a contextual menu where you can choose to open the image in the external editor you set in preferences.
    Just remember, if you choose to save the edited copy with a different name (and/or in a different format), use "Save As..." to save it back to a location outside of your current iPhoto Library so you don't corrupt your iPhoto database.

Maybe you are looking for