Double Clicking the Job in Control Center hangs the Mapping

i have deployed a mapping.
When i run the mapping the mapping fails
When i double click the job for the particular mapping in the control center,The system hangs.
Please let me know the reason for the same and how to resolve it.

Thanks for the reply David. I'm using OWB 10.2.0.4. Is this a known bug? I don't mind splitting into 2 mappings. My only concern is that ~60% of the data processing are overlapping. I'm using MOLAP. Is there a way to share staged table data on 2 different mappings?

Similar Messages

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Open Containing Folders is never active.

How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
by double-clicking on an associated file?
You lost me at: you want to test-run code that is not on your PC.
O_o
You want to double-click a file, and then...what do you want to have happen? You want to run...something...that is not on your PC??
The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so. (This is tantamount to "install" to me.)
In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file. It's pretty small.
EXAMPLE ONLY:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.wyck]
@="Wyck.Document"
[HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
@="c:\\windows\\system32\\notepad.exe \"%1\""
[You have to save the above with your appropriate modifications to a file with the
.reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
Wyck.Document.
Then it associates a shell open command with the Wyck.Document class that causes
notepad.exe to be passed the filename of the file you double-clicked (that's what the
%1 does). You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
This executable will be launched, but not with a debugger attached. To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
When you are done with your testing, you can simply manually delete those two registry keys using
regedit.

Double clicking a jpeg image in bridge opens the image in windows viewer not Photoshop cc 2014....any suggestions?

double clicking a jpeg image in bridge opens the image in windows viewer not Photoshop cc 2014....any suggestions?

Hi
open Adobe Bridge click on the Edit>>> go to preferences >> then select file association on the left .
then on the right scroll down and select the JPEG extension and change the application to which you want to open the Jpeg
below is the screenshot for your reference

I'm experiencing extremely slow response when attempting to open the control center from the lock screen, any suggestions?

When trying to access the control center from the lock screen, it takes anywhere from 2 to MANY swipes to get a response. Never opens on the first try.

I'm not having the same problem, but there is a feature in the OS that attempts to discern from swipes to unlock and swipes to open control center. This is what you may be experiencing.

When i double click a photo in iphoto to edit, the screen goes black

when i double click a photo in iphoto to edit, the screen goes black. I'm using 10.7.5 with iPhoto 9.4.2. Can anyone help?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

To know the job details if u know the jobname

Hi,
can we know what excatly job purpose is like for what purpse it is created or in other words what is the basic idea behind creating job, who has created the job , when he has cretaed the job etc if u know the job name?
Thanks,
Ravi

Hi...
1.Go to SM37--put job name as * and username as *.
tick all jobs scheduled,finished ,cancelled...etc and then execute..
2.Double click on any of the jobs...whose details you want to view....now..click on job details F7 you will view all the details..
and job log ..to view how the job was executed...etc.etc..
3.point the cursor on your job...and click on step button....now on next screen you will find ..top menu..GOTO --select variant to view variants of the job..

How to fill up the Flex ProgressBar control ,depending upon the Controls Seelcted inside the MXML

Hi ,
Please , let me know How to fill up the Flex ProgressBar control ,depending upon the Controls Seelcted inside the MXML
Lets say I have five text boxes and a dropdown box in my flex application, how can I make the progress bar fill up when there is text in each box, and the dropdown selected.
Please help
Thanks in advance .

Hi Kiran,
You can do something like below to implement the functionlaity you needed...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" verticalAlign="top"
    horizontalAlign="center" backgroundGradientColors="[0x000000,0x323232]" paddingTop="0" viewSourceURL="srcview/index.html">
    <mx:Script>
        <![CDATA[
          private var j:uint=0;
          // Event handler function to set the value of the
          // ProgressBar control.
          private function runit():void
              if(j<=100)
                j+=10;
                 bar.setProgress(j,100);
                 bar.label= "CurrentProgress" + " " + j + "%";
              if(j>100)
                 j=0;
                 check1.selected=false;
                 bar.setProgress(j,100);
                 bar.label= "CurrentProgress" + " " + j + "%";
          private function checkFunction():void
           if(!check1.selected)
             if(j<=100)
                j-=10;
                 bar.setProgress(j,100);
                 bar.label= "CurrentProgress" + " " + j + "%";
              if(j>100)
                 j=0;
                 check1.selected=false;
                 bar.setProgress(j,100);
                 bar.label= "CurrentProgress" + " " + j + "%";
            else
           runit();
        ]]>
    </mx:Script>
    <mx:Panel title="ProgressBar Control" layout="vertical" color="0xffffff" borderAlpha="0.15"
         paddingTop="10" paddingRight="10" paddingBottom="10" paddingLeft="10" horizontalAlign="center">
         <mx:Label width="100%" color="0x323232"
            text="Click the button to increment the progress bar." />
            <mx:HBox>
          <mx:CheckBox id="check1" label="Check Me" color="#123456" click="checkFunction();"/>
        <mx:Button id="Speed" label="Click" click="runit();" color="0x323232"/>
          </mx:HBox>
        <mx:ProgressBar id="bar" labelPlacement="bottom" themeColor="#EE1122" minimum="0" visible="true" maximum="100"
             color="0x323232"    label="CurrentProgress 0%" direction="right" mode="manual" width="100%"/>
    </mx:Panel>
</mx:Application>
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Why has the "Job" movie been loading for the past 3 days? I have a 10Mb Uverse Internet connection.

Why has the "Job" movie been loading for the past 3 days? I have a 10Mb Uverse Internet connection.movie

It should not take more than 4 hr. Is there any indication it is making process? i.e. When you click on it to play do you get a message like "Will be avialable in 2hr 34 min"? Is that time changing? I would cancel the download. Restart ATV and then retry. If it goes more than 4hr then there is an issue.
As another option you can always download the movie to your computer and use the iTuens menus to play it from your computer under the Computers icon.

I have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

i have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

Yes.
http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

Command to handle the double click on a Grid Control

Hello,
In my application, I am adding multiple 'Grid' controls inside the 'Canvas' control. Each of this 'Grid' control is binded to a ViewModel object (say 'GridInformationViewModel') which is having a command saying 'ShowPropertiesWindow' to show a new window
for respective Grid control. Grids are dynamically getting added in the Canvas control for each the new ViewModel 'GridInformationViewModel'.
How i can bind this command for each of the 'Grid'?
Thanks,
IamHuM

Thanks all for your replies.
I tried adding code as per your suggestion. But i am not able to get the command working using the 'Interaction.Triggers'. Here is the code which i am using. Binding is working properly for this code only the command is not getting fired for the Grid control
'SelectedGrid'. Can you please help me to find the problem in my code.
<UserControl x:Class="CustomShapesDesigner.Controls.UserControlCustomShapePanel"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
mc:Ignorable="d"
xmlns:i="http://schemas.microsoft.com/expression/2010/interactivity"
d:DesignHeight="300" d:DesignWidth="300">
<Border BorderBrush="Purple" BorderThickness="5" >
<Grid Name="gridParentItems" Loaded="grid1_Loaded" >
<ScrollViewer Name="ScrollViewer"
Background="Black" HorizontalScrollBarVisibility="Auto"
VerticalScrollBarVisibility="Auto" Loaded="DesignerScrollViewer_Loaded" >
<ItemsControl ItemsSource="{Binding CustomShapeItems}"
ItemContainerStyleSelector="{x:Static designerHelpers:DesignerItemsControlItemStyleSelector.Instance}">
<ItemsControl.Resources>
<Style x:Key="customShapeItemStyle" TargetType="{x:Type ContentPresenter}">
<Setter Property="Width" Value="200"/>
<Setter Property="Height" Value="200" />
<Setter Property="SnapsToDevicePixels" Value="True" />
<Setter Property="ContentTemplate">
<Setter.Value>
<DataTemplate>
<Grid x:Name="selectedGrid" Loaded="selectedGrid_Loaded"
MouseLeftButtonDown="selectedGrid_MouseLeftButtonDown" MouseLeftButtonUp="selectedGrid_MouseLeftButtonUp" >
<i:Interaction.Triggers>
<i:EventTrigger EventName="MouseLeftButtonDown" >
<i:InvokeCommandAction Command="{Binding ShowElementPropertiesCommand1}" CommandParameter="{Binding}" />
</i:EventTrigger>
</i:Interaction.Triggers>
<ContentPresenter x:Name="PART_ContentPresenter"
HorizontalAlignment="Stretch"
VerticalAlignment="Stretch"
Content="{TemplateBinding Content}" />
<Border BorderThickness="3" Margin="5" CornerRadius="3" BorderBrush="Aqua">
<Grid Margin="10" x:Name="PART_ConnectorDecorator"
MouseLeftButtonDown="selectedGrid_MouseLeftButtonDown" MouseLeftButtonUp="selectedGrid_MouseLeftButtonUp" >
</Grid>
</Border>
</Grid>
</DataTemplate>
</Setter.Value>
</Setter>
</Style>
</ItemsControl.Resources>
</ItemsControl>
</ScrollViewer>
</Grid>
</Border>
</UserControl>
Thanks,
IamHuM

Launching a Preview Session Outside the ATG Business Control Center

I have setup a remote preview server on ATG 10.1.1. Everything works great when viewing it inside the BCC however I’m wondering how to access the preview server outside the BCC. According to the ATG documentation, it sounds like that’s possible. The ATG docs state:
“Users can preview project asset changes outside the framework of the Business Control Center. For example, you might want employees or outside reviewers who do not have access to the Business Control Center to evaluate changes to a Web application while it undergoes development. In this case, you can enable preview on servers that do not have the Business Control Center installed, then give reviewers URLs to the launch pages on these servers. They can invoke these URLs from any browser window.
Note: Users who are not logged into the Business Control Center can invoke preview sessions only with URLs to a server where the Business Control Center is not running. In order to avoid security breaches, URLs to preview sessions on the Business Control Center server are blocked.”
This is the only information I found in the documentation that talks about viewing preview outside the BCC. Based on this limited information, there are a lot of questions I have about how this actually works.
1. Any attempt to hit any page on my remote preview server outside the BCC, I see the following exception:
“ERROR [PreviewProfileRequestProcessor] An attempt was made to preview a project without logging in as a user with access to publishing assets. If you are running a local preview instance, the preview URLs registered with the PreviewURLManager may be misconfigured. Ensure that the preview URLs are configured with the same host and domain name used to access the BCC server. This preview request URL is: http://localhost:8280/sample_catalog/index.jsp. If you are running a remote preview instance, the Preview feature does not support remote preview on servers running the BCC. Ensure that the remote preview instance is not running any of the BCC related modules. If you received this error and did not try to perform a remote preview, then you may need to disable preview in the current web application by setting the atg.preview context parameter to false in the webapps web.xml file.”
I am not running the BCC on this instance so I’m not sure why I am seeing this. Is there something configuration I'm missing here?
2. I don’t understand where these urls would come from that a reviewer would use to preview the application. There is no "remote preview url" when previewing a page from within the BCC to copy and send to a reviewer so how would a BCC user send a url to a reviewer?
3. Assuming the reviewing knew which page to hit in the remote preview server, how would that page use the assets from a project? Should the project id of the project be include as a param to the url?
- Michael

Shaik, if only it was that simple :( Do you have much experience working with remote preview or are you just guessing here like I have been? In order to help clarify my post though, here is the scenario that describes the basis for my questions:
A business user is working on a project within Merchandising of the BCC
1.     The user makes a change to a category
2.     The user clicks the Preview Button on the tool bar
3.     The system displays the Preview launcher screen
4.     The user selects a pre-configured profile user and page for the preview session
5.     The user clicks the Flexed based launch button
6.     The application displays within the context of the BCC browser/tab
7.     The business user would like to send that url to a reviewer who does not have access to login to the BCC
What happens from step 6 is that a giant iframe launches from within the context of the BCC browser/tab. If you are using remote preview, it is still an iframe and still displays within the context of the BCC browser/tab, the only difference is that the BCC is proxying information to the preview instance in order to initialize the preview session to display the application in the context of the business user’s project. The url the user sees in the browser is the url for the BCC, not the remote preview server. Because the UI for Merchandising and Preview is built using Flex, there is no way to click on the Preview button to open it up in another tab or browser. The only way your suggestion would work is if there is a way to configure the Flex UI to have it open up preview in a new browser/tab which I doubt is possible.
I hope this helps better explain my post. With that said though, this brings me back to my original questions.

How to handle double click in a table control?

Hi,
Can any one let me how to handle double click event in a table control in dialog programming?
here i need to navigate to another screen when user double click on the table contols (emp number column).
thanks in advance,
PrasadBabu.

to define double click in your table controlwhich is similar to 'PICK' function. Enable F2 in PF-status for this
Table Control Question
Check the above thread which was posted recently on SDN, please award points if found helpful

How to remove scheduled jobs from Control Center?

Hi,
My control center shows a bunch of jobs in the "scheduled" tab that no longer exist.
They do not exist in Control Center and they also do not exist in the Design Center anymore.
Is there a way I can delete entries from the list of schedule jobs?
I am on OWB 10gR2
Thanks,
Sam
PS, I saw this thread that talks about my problem. However the solution provided seems to only work if the jobs still exist
in your control and design centers.
OWB 11g Control Centre, Want to Remove Schedule Jobs list

Could it be that some process flows are still attached to a schedule? Perhaps you've made a copy of a Process Flow?

Double Clicking the Job in Control Center hangs the Mapping

Similar Messages

Maybe you are looking for