Double entry in each field of Adobe Acrobat Pro

I am using Adobe Acrobat Pro to complete a prepared form. Upon entering data in to blank fields, I get a duplicate entry in each field box in a different font size when I tab or enter to the next field. I am sure it is a setting, any suggestions?

Thank you George.
After messing around a bit I was able to open in acrobat pro and remove the duplicate fields. Thank you for your help.
Randy

Similar Messages

Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

Hi,
the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
Is it possible. if so, can someone kind enough to point to me right directions?
Thanks in advance.

Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

Create a dynamic dropdown field in Adobe Acrobat Pro XI

Hello all. I am trying to create a field in one of my forms using Adobe Acrobat Pro XI. I have a dropdown list of "main" items, and based on what is selected in that list, I want a second dropdown list to give different choices. I have searched and searched and have javascript that I thought might work, but maybe I am have a mistake or I am placing the javascript in the wrong place, becasue it is not working. I know very, very little about javascript, so any help would be so much appreciated.
I am using Adobe Acrobat Pro XI. I added a "new field", and selected "dropdown". The field name is ProvType. The dropdown options are:
     Inpatient
     Outpatient
     Physician
I have the "Commit selected value immediately" selected.The field is not validated. The format is "none." There are no actions or calculations associated with it.
I then created another dropbox, and named it SubProvType. Under Actions, I selected the trigger as Mouse Up, and then selected the Action "Run a JavaScript." I selected the add button, and typed this in the JavaScript editor:
switch (ProvType.rawValue)
    case "Inpatient":
        this.setItems("Hospice,Hospital,Nursing Facility");
        break;
    case "Outpatient":
        this.setItems("Adult Day Center,Home,Other");
        break;
    case "Physician":
        this.setItems("Surgeon,Family Practice,Neurologist");
        break;
What I want to happen is:
If "Inpatient" is selected, I want the following options to be available in the second dropdown box "SubProvType":
     Hospice
     Hospital
     Nursing Facility
If "Outpatient" is selected, I want the following options to be available in the second dropdown box "SubProvType":
     Adult Day Center
     Home
     Other
If "Physician" is selected, I want the following options to be available in the second dropdown box "SubProvType":
     Surgeon
     Family Practice
     Neurologist
However.... when I close the form editing and try to select a different option in the ProvType field, the SubProvType field remains blank and there are no options available. There are also no errors.
I must be missing something, but I have no idea where to start. Thank you in advance for any help anyone can provide.

dbettis2.... Please understand that everything I am about to tell you is ONLY thanks to the help I received from Gilad D. I don't know if this will help you or not, but I want to try and pass it forward.
If what you are looking to do is have two dropdown fields, and the second one (concentration) be a list determined by what was chosen in the first one (newMajor) then this will work, if you are using Adobe Acrobat Pro.
Create a dropdown field and name it newMajor. In the "options" tab. Make sure that you enter all of the items that you want in that list AND that they match the javascript (or this will not work.)
In this case, I believe you want the initial list to be:
- Select One -
BA - Communication (BACOMM)
BA - History (BAHIST)
BBA - Business Administration (BBA-BADM)
After you create the dropdown field and enter all of the options, go to the Validate tab, chose "run custom validation script", then copy and paste the following:
switch (event.value) {
    case "- Select One -":
        this.getField("Concentration").setItems(["-----"]);
        break;
    case "BA - Communication (BACOMM)":
        this.getField("Concentration").setItems(["- Select One -","None","Mass Communication (MCO1)","Theatre (THEA)","Communication Studies (MC02)"]);
        break;
    case "BA - History (BAHIST)":
        this.getField("Concentration").setItems(["- Select One -","None","Teacher Certification (HIS1)"]);
        break;
    case "BBA - Business Administration (BBA-BADM)":
        this.getField("Concentration").setItems(["- Select One -","None","Supply Chain Management (SCM)","Hospitality Management (HSMG)"]);
        break;
Then create a second dropdown field, and name it Concentration. Nothing further needs to be done with the second dropdown field (as far as entering options or any javascript.)
It should work. I have created a form using this code and field structure, and it is working. I hope this helps you, if in fact this is what you were trying to do. (I do not know how to attach a file to this post or I would send you the PDF that I made so you could see the fields. If you message me, I can send it to you.)

Format Date Form Field in Adobe Acrobat Pro

Thanks in advance for your help. I have date fields in an Acrobat form. Is it possible to create a script to format a date as either MM/DD/YYYY or MM/DD/YY? In other words, if someone enters MM/DD/YYYY, the date would be accepted and MM/DD/YY would also be accepted. Thanks, again.

Since the time measurement is based on a sattilite revolving around another object in space, much of the concepts and measurements apply to rocket science. But I do not know if all rocket scientist woudl get it. Wasn't there a sattilite that mixed miles and kilometers within the navigation program with a suprising result.
One needs to get to a common unit and then just do the math.
Actually JavaScript does have an adjustment for the Date.getYear if the date object is established with the 4 digit year.
I had a recent issue at work. I work from the U.S and have to access data on a server in the UK using Remote Desktop and the remote deskto is configured for the UK date format unless the user changes it. In prior years the data was processed on servers in the U.S. with U.S. date format. There were many instances when the date and month were swithed and requires over a month to fix. Thank you Microsoft Certified Network Administrators.

Adobe Acrobat Pro (version 9 and X): creating limitations in a group of fields.

Hello,
I am building a fillable questionnaire form using Adobe Acrobat Pro 9 and X.
Within 1 question, I want to set 3 fields, each representing an answer that can only be answered once.
I know about Radio Buttons but, I need to have some text written instead of a checkbox.
How to set a limit onto a field to direct person filling in the form to answer only 1 of the 3 fields within the same question?
Please advise.
Thanks,
Win_win

Thanks for your explaination although I am aware of both functions and thats why I chose one over the other.
I can understand that with more experiences with scripts or the software, you can 'play' with the function much easier and better than I could as I'm quite junior to all of these. So I appreciate if you can bare with me as I try to explain what troubles I have and ways I had tried to solve them.
The trouble I have, is Radio buttons have pre-set options and thus would not allow end user to write down their own value. But what I need, is the value and the limitations that the end user could only choose 1 of the 3 options from a group. (Note that I am not using any scripts so I'm using the softwares' function as-is.) In other words, if the group for 1 button has answers as A, B, or C. I want to know how much of A. And not a pre-set value of A. If the end user chose A, then B and C would not be chosen. As it's either the quantity of A, or B, or C.
Also, what I did not understood from your message earlier today was what is a 'nullstring' in a text field and how to create that?
It seems from your response earlier that I could solve my problem with either Radiobuttons or, Checkboxes.
If I were to use checkboxes, then how can I 'add a control to make the text field read-only when one of the checkboxes has been selected' as you've suggested?
Is one option better than another? At managing responses received?
I will have to repeat this for quite an amount of questions I have for the form, so whichever that is easier to achieve and would produce minimum problems /errors, would be preferred.
I hope I have explained myself clearly.

I have developed a fillable form using Adobe Acrobat Pro. The form has several fields and some of the information is captured in a bar code. What programs must be used to open the form to properly fill the form out? Adobe Reader, Adobe Xi, Ibook, etc.. I

I have created a fillable form using Adobe Acrobat Pro that contains several data fields with some feeding data to a barcode in the document. I have a "button" set up to save and send the completed form one it is completed. Some of the user are having troubles filling out the form as they are using various programs to do such as iBook, Adobe Reader, etc.... Sometimes the information is not transferred to the barcode and sometimes the "submittal button" doesn't function properly.
Please provide a solution or give me a list of the programs that must be used to properly open and fill out the form.
Greatly appreciated.

Best option is to use Adobe Reader (or Acrobat, of course) on a desktop computer (ie, not on a mobile device). Any other configuration is likely to be problematic.

I get prompted to select a scanner and a scan profile/preset each time I try to scan a document to PDF using Adobe Acrobat Pro.

Hello,
I have a fujitsu scanner (fi-6140) connected to my computer and have the "Scan" button on the scanner associated with Adobe Acrobat. And so when I press the "Scan" button on the scanner to scan a document, it launches Adobe Acrobat Pro automatically. Then I get prompted to select a scanner/device and a scan profile. It seems to remember the last-used scanner/device, however; it still prompts me each time to confirm the scanner/device selected and select a scan profile to use. Is there a way to save both the scanner & scan profile information and so when I click the "Scan" button, it doesn't prompt me to select but starts scanning using the last-used settings automatically?
Thank you.

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

I just purchased Adobe Acrobat Pro and am getting an error each time I try to download it. Help, please and thanks.

I just purchased Adobe Acrobat Pro and am getting an error each time I try to download it. Help, please and thanks.

Hi Melanie Wheeler,
Please let us know the Exact error message, that you are facing while downloading Acrobat.
Hope to hear from you soon.
Regards,
Rahul Tyagi

I have downloaded Adobe Acrobat Pro Xi when I double click asked for pass word. done then it does nothing?

I have downloaded Adobe Acrobat
Pro XI, A disks appears on my Mac OS 10.10 desk top, I double click prompted for my password, entered then the ICON appears, double click apparently INSTALLER and NOTHING!

Hi Suzanne Glasper,
You are posting on acrobat.com online service forums.
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

Adobe Acrobat Pro text box not printing and is hidden under box highlight.

Adobe Acrobat Pro 10.1.13. I am completing a form with text box throughout the document. I can no get the text box to printing and the text is hidden under box highlight. I have tried printing with the print feature 'Comments & Forms/ Document and Markups' with no luck.

It's doing that because you have field highlighting enabled. YOu can either turn it off or make the field read-only (if it's only used for display and not entry).

How do I customize Adobe Acrobat Standard DC or Adobe Acrobat Pro DC to do what I'd like? Actually this a multiple-question inquiry.

Note, I was unable to find a "How TO", Tutorial, or FAQ relevant to the following questions.
For instance, how do I easily append to an existing PDF with minimum clicks (which I could do with an earlier version of Acrobat Standard)?
I'm using a 30-day trial of Adobe Acrobat Pro DC to scan documents and in certain situations, append to existing PDFs.
I'd prefer to trial the Adobe Acrobat Standard vs. Pro DC because that's what I intend to purchase. I'd prefer to not get accustomed to Pro if Standard is very different.
1. After selecting Edit > Preferences and specifying certain defaults, most take effect as suspected but some do not, like the one's I'm going to elaborate on below. Why?
2. Alternatively, is there a Tool or a way to create a local customized Profile and default to that Profile to avoid having to repeat the following steps?
   This should not be confused with the online Profile (or Communities Profile) whereby one states one's Name etc.
File
> Create
   > PDF from scanner
     > Custom scan
       > Color Mode: Black and White
       > Append to existing file
         > Browse
           > Select file
             > Scan
This is a cumbersome task to repeat each time I'm ready to scan. Using an earlier version of Acrobat Standard, I'd simply double-click the PDF I wished to append to,
Acrobat would default to the appropriate scanner, and know that I wished to append to an existing file without me having to select that option. Presently it doesn't appear to be that easy/simple.
Perhaps it is (or can be with guidance). Please assist.
3. Please find attached the following snapshots/images... CORRECTION, IF ADOBE SUPPORT CONTACTS ME ABOUT THIS, I'LL GLADLY FORWARD SCREENSHOTS.
   Meaning, there does not appear to be a way to include screenshots on Forums.
3a See Error. Is there a way to get a more accurate description of the error (i.e., turn on debugging etc.)?
3b When Creating a PDF, the prompts still seen after clicking "Configure Presets" and changing Color Mode from AutoDetect to Black and White. Why?
3c Custom Scan Input, where I changed Color Mode from AutoDetect to Black and White and why I must also tell Acrobat to append AND to browse to a pre-defined default location?
4. Must I be "Logged in" to use the product? The first time launching it, I was prompted to login using the credentials used to create the account and download the product. Now when using the product it appears to be automatically "Logged in" or online. I would prefer to use it in an "offline mode" if there is such a thing.
5. Once the product is purchased, what are my support options? Can questions be answered or issues resolved with a phone call or are they limited to the Acrobat Forum(s) and/or Adobe Communities? Even after clicking "Ready to contact us? Start here." I'm only given the Forum option (over and over) vs. Chat vs. Email Support etc.
If I've posted these inquiries to the wrong Forum or Discussion, if prudent, please collectively relocate them. Regardless, please advise. Thanks!

uninstall all acrobat/reader versions and retry installing.
or check your log files for more specific help, Troubleshoot install issues with log files | CS5, CS5.5, CS6

How can I add a button to add multiple image in PDF from using adobe acrobat pro?

I have to create a pdf form using Adobe Acrobat Pro X.
In this form I want to add a button where I can add multiple images to the field.
I have tried using javascript event.target.buttonImportIcon(); and successfully add an image, but when I want to add the 2nd image it automatically overwrites the previous one.
Is there any way to solve this issue? I would like to have a form where I can add a lot of images in it. It is possible in word, but we really have to use adobe.
Thanks

Hi thanks for your answer.
I can add multiple button, but if there are 10 images that I wan to add, then I have to create 10 buttons.
Moreover, the pictures will be placed on top of each other and it means that you cannot see it clearly.

Need help with Java Script to perform a calculation in Adobe Acrobat Pro 9 form

I have a form (test) that I am creating in Adobe Acrobat Pro 9.
I need help creating custom Java Script so I can get the desired answer.
1) There are several questions in each group that require a numerical answer between 0-4
2) There is a total field set up to sum the answers from all above questions
3) The final "score" takes the answer from Step 2 above and divides by the total possible answer
Any help on what Java Script I need to complete this would be greatly appreciated!
I've attached a "spreadsheet" that shows it in more detail as well as what formulas I used in Excel to get the desired end result.
Thanks in advance.

Have you tried the "The field is the average of:"?

Error when trying to install Adobe Acrobat Pro, recently purchased.

Recently purchased Adobe Acrobat Pro, when trying to install get an error message 'Your account subscription cannot be validated'. Have tried several times, double checked login etc, but same message each time.
Please help, how to fix this issue??

Hi camelon,
Please delete the "Acrobat" and "OOBE" folders found in
on Mac: <yourusername>/Library/Application Support/Adobe
on Windows XP: <youruser>\Local Settings\Application Data\Adobe
on Windows 7: <youruser>\AppData\Local\Adobe
and delete the "Acrobat" folder found in
on Mac: <yourusername>/Library/Preferences
on Windows XP: <youruser>\Local Settings\
on Windows 7: <youruser>\AppData\Roaming\Adobe
Then launch Acrobat. It will go through the first launch experience of asking for UI language, AdobeID, etc.
If there's no change in behavior, please attempt to go to:
https://na1mbls.licenses.adobe.com
If you can't get to this website there may be a firewall or other software blocking the connection. Acrobat must be able to reach this https URL and 3 others in order to complete and monitor the subscription/trial process.
If you can view the page at this URL, then please send the PDApp.log and amt3.log file from
on Mac: <yourusername>/Library/Logs/PDApp.log
on Windows 7: <youruser>\AppData\Local\Temp
to [email protected]
Regards,
Rave

Duplex by default - Adobe Acrobat Pro XI

Hi,
I am using Adobe Acrobat Pro version 11.0.10 on a Mac running OS X 10.10.1 with a latest updates installed. I would like to make Adobe Acrobat Pro to print double sided (Duplex) by default. In a printing dialog there is a checkmark called "Print on both sides of paper" which does the trick, but only temporary. I have to check this option each and every time I want to print duplex.
What I tried is to edit preferences file located in /user/Library/Preferences/com.adobe.Acrobat.Pro.plist and added key "DuplexMode" under "AVGeneral" and I didn't worked. I did some research online and I found out that previous versions of Adobe Acrobat Pro and Adobe Reader had no problems with defaulting Duplex option, I even installed Adobe Reader 10.1.2 myself to try and it worked like a charm. Please let me know how can I default Duplex printing on a newest version of Adobe Acrobat? It seem like a bug to me, if it is, let me know when can I expect a software update to fix this? Thank you

I got the precise same problem. I have wasted so much paper by forgetting to click the double-sided, and I just want it to be default.
I have a brand new computer using Adobe Acrobat Pro version 11.0.10 on a Mac running OS X 10.10.2 with a latest updates installed.

Double entry in each field of Adobe Acrobat Pro

Similar Messages

Maybe you are looking for