Double file extensions keep showing up when saving a file in Illustrator CS3???

I just installed the CS3 suite and when I am saving files in illustrator I keep getting double file extensions. For example if I save a file named "filename" as a .eps file it shows up in the save window with filename.eps.eps Also, if I click through the possible file types to save it keeps adding them one after the other so if I click. say pdf eps and ai the file in the "Save As:" window looks like this " filename.pdf.eps.ai.ai" Any ideas why this is happening? I keep having to mouse click in the "Save As:" box and delete the extra extension. This is really annoying!!
I am running the design premium CS3 on OSX 10.5 on a mac pro.
Thanks.

>Wade... I've seen it... and reported it originally to Adobe. I've since realized it's a 10.5.1 issue. It doesn't happen with 10.4.11, just 10.5.1
I've seen extra periods (.) and extra extensions.
then you and Dave have the same conflict with a third party software, corrupt font, corrupt preference or the like because it is not happening o my Mac Pro and I have the same model Mac as you do and I am working fine in 10.5.1 and only problem I have had with AI CS 3 is when I tried to place a 3D CAD file with the extension .dxf which is not really supported.
I have not seen this even once. Would you like to see screen shots, it honestly is not a 10.5.1 or Illustrator issue on its own. This has to be user specific.

Similar Messages

  • How to keep 300dpi resolution when saving a jpeg from illustrator

    I have an illustrator cs4 file set up in 300 dpi. when I save it into a jpeg, it automatically downsizes it to 72 dpi and the quality of the image is really bad. how do i keep a 300 dpi resolution when I save my document to a jpeg file from illustrator?

    Use file >> export >>jpeg>resolution >> custom 300
    Sounds like you were using save for web.

  • Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    When you save a file that's what options offers application
    05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
    sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link.

  • The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

    The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
    Hi There,
    The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
    I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
     Context where exception was caught:
    Func:
    CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
    cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
    Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
    User Name     : slaney
    OS Version    : 5.1.2600 (Service Pack 3)
    Exception Code: C000001E
    Exception Addr: 457BC448
    Return Address: 457BC448
    Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
    Module Name   : FieldPoint71
    Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
    Source File   : (not available)
    Return Address: 481000C3
    Function Name : (not available)
    Module Name   : (not available)
    Parameters    : 00000000 00000000 00000000 00000000
    Source File   : (not available) 

    Hi,
    I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
    These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
    If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
    Let me know.
    DirkW

  • Why is one TIFF pixelated when saving .pages file as .doc?

    Hi, when I save my Pages file as Word '.doc' format (using the standard 'save copy as' method, OR exporting as .doc) one of the high resolution TIFFs in the file always shows up pixelated, the other is sharp.
    Do you know why one TIFF would be pixelated, and how to get them both showing sharp after saving the file as a Word .doc?
    Both TIFFs are 300dpi CMYK, but are different sizes (the sharp one is smaller).
    Thanks!

    when I save my Pages file as Word '.doc' format (using the standard 'save copy as' method, OR exporting as .doc) one of the high resolution TIFFs in the file ... Both TIFFs are 300dpi CMYK, but are different sizes
    The thing is that .DOC is the file format for versions of Microsoft Word which were developed to work with the Windows GDI Graphics Device Interface, the counterpart of QuickDraw in Mac OS 9.2 and lower.
    Neither GDI nor QuickDraw are capable of colourant formats other than RGB. There are tried and true ways around this in prepress,
    1. do not pick TIFF, JPEG, PICT or BMP file formats that are processed by GDI and QuickDraw, but pick a file format that is not processed by GDI and QuickDraw (EPS, PDF).
    2. pick a colour managed path through GDI and QuickDraw so that CMYK tagged with a source ICC colour space is converted into some form of colour managed RGB which in turn can be converted back into some form of colour managed CMYK for whatever printing condition is to be chosen (whether by a third party driver installed in the OS or by other means).
    There are other possibilities, as Peter mentioned, but transparency isn't supported in GDI and DOC any more than CMYK is supported. And to go back to the beginning, why in the world are you trying to work in CMYK when you in all likelihood have no knowledge of the ink limit, graybalance and paper for the intended printing condition? You should be working in ICC colour managed RGB.
    /hh

  • Excel Hangs when saving a file

    Hi
    When saving a file (CTRL+S) excel hangs, no error or anything.
    This happens on Windows 8 PRO, on Win7 no problem at all.
    Tried on EXCEL 2010 and EXCEL 2013 Customer Preview.
    Checking the file after the app crash shows no file exists however 2 files exist instead:
    *.TMP file
    *.[NOTHING] file
    The *.TMP is the new file i just saved, if I change it to *.XLSX it works fine, no curroption.
    This was done saving on DESKTOP.
    Since file was saved I assumed there is some kind of permission error so I changed the directory permission for "C:\Users\MYUSER\DESKTOP" to "EVERYONE".
    With this setup excel saves without a problem....
    I guess EXCEL tries to save under  a different user which has no permission but why no error?
    Any ideas?

    Hi,
    Check to see whether the user you logged on to the system has the permission to the file.
    Also, check to see whether the following link is helpful:
    http://support.microsoft.com/kb/271513
    http://support.microsoft.com/kb/313937
    And, based on my research, hang when saving the file also maybe caused by a printer installation.
    Check to see the following link:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
    Jaynet Zhang
    TechNet Community Support

  • While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

    While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again.  Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
    Thanks
    phil

    I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • FrameMaker crashes when saving a file as XML

    Hello -
    I am encountering a problem saving a .fm file as a .xml file. I have saved many .fm files as .xml files in the past with no issues. However, lately FM crashes with a "serious error" on certain files when I try the same save process. My initial thought was that the file was somehow corrupted, but this morning I ran into this scenario: I have 3 FM licenses in my office, I was trying to save a .fm file as .xml and FM kept crashing. So I had another co-worker try to save the exact same file as a .xml file and it WORKED!?!?!?!
    We all were using FM 11, but I have since installed FM 12 thinking that version 12 wouldnt have the same problem, but the same issue is happening with both versions of FM. I read that FM has issues when working across a network so I have tried it both ways, across the network and locally and the same issue occurs.
    Again, this problem occurs occasionally on various files - not every file, but as previously mentioned I was able to successfully save a file on a different machine that I could not save on my machine. I have the most recent log file that was generated after a crash:
    [*** LOG FILE REMOVED BY MODERATOR***]
    Thanks in advance for any help in this matter.
    Gavin

    An update -
    So FM now appears to crash "sometimes" when saving as an xml file AND when saving the file in general. I have 3 machine with FramMaker installed, first with version 11 now with version 12. These 3 machines are all identical as far as SW running on them, etc... I have been unable to detect a pattern as to when FM will crash thus far. Sometimes it will crash when I try to save the file as an .xml file and sometimes it will save just fine. I have resorted to marking up the document a little at a time, saving the file, then trying to save as an XML file. It will work sometimes and other times it will crash. Sometimes it crashes when trying to save the .fm file other times it works; sometimes it will crash when I try to save the .fm file as a .xml file, other times it will work. About the only thing in common that I have found thus far is the fact that it happens with the same file over and over again; meaning that if I have a pool of 12 files that I need to load into FM and markup, 11 of the 12 files may work just fine and the 12 file will not - it will crash FM at some point in the markup/saving process every time. One might guess that the original file is somehow corrupt and that may be, but at this point I am not sure how I prove that is the case as FM seems to load it in just fine and I can save it right off the bat just fine. Does anyone know how I can prove that the structured file i receive initially is corrupt when it loads into FM fine? If we were causing some issue with the import of our modified EDD then why dont we have the same issue with the other 11 files in the batch as they all are using the same EDD?
    I have sent my most recent log files to adobe tech support this morning. I have tried saving files on shared drives as well as on local drives. I have tried the same process on the other workstations with the same results.
    Does anyone have ideas on how I can isolate a problem with the source file (structured doc) or on why FM is crashing when I perform these actions?
    Thanks,
    Gavin (Ryan)

  • When saving a file i don't see the progress

    When saving Numbers files I use to see the progress of the save.  I no longer see its progress.  The files are being saved.  Any reason why this is happening??
    tj

    I'm on OS X 10.7, your profile says you're on 10.6.8, so i can't duplicate what you are seeing. If I was to guess, I'd say it is related to changes made for Lion where versions are  periodically saved automatically in the background, where you wouldn't want a progress window always popping up. "Save" has become "Save a Version" and, though I hadn't noticed, probably also does not pop up a progress window..

  • Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    Why aren't all view options available when saving a file from Adobe InDesign CC 2014 on OS X Yosemite?

    ASk in the ID forum and explain better what you actually mean.
    Mylenium

  • Our illustrator files are not showing up when uploaded to creative cloud.

    Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

    If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
    You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

  • How automatically saving a copy when saving a file?

    Hi,
    For my pictures (RAW and PSD) I use a separate external disk, our Timecapsule would be full in a year. My work flow in copying is normally no problem. But of course now my iMac drive is 'broken' I find a few PSD-files not be copied to the external drive. I wondered, is there a simple way to automatically save a copy when saving a file (and replace an earlier version of the copy)?
    Murk

    Thanks. FWIW I'm very keen on improving tethering and lobbied Adobe endlessly until they added the overlay for shooting into layouts because it was a major reason why some of my clients were unable to switch to Lightroom from PhaseOne. But we have to be realistic and remember that tethering just isn't a key market for Adobe as it is for PhaseOne, so progress is painfully slow. For example, where is live view or setting exposure which are in PhaseOne? I'd be amazed if we get those features for a few versions, and that's why I point serious tethered shooters to other solutions. And realistically, assuming your understanding of the SDK is correct you shouldn't expect a change until the next full version of Lightroom.  Good if it happens, but I wouldn't bet on it.

  • Kate and kwrite (14.12) selecting encoding when saving a file.

    How can someone select encoding when saving a file?
    Old save dialog:
    New save dialog:

    No, you can't.
    It changes in what encoding a file is *shown*. It does not affect in what encoding a file is *saved*. I think it is a bug, or a forgotten feature. I've downgraded kate because of that(looks like only solution).
    And there is the bug report I've reported about issue:
    : https://bugs.archlinux.org/task/43577

  • When saving certain files get the error "Error saving file..."

    When saving certain files get the error "Error saving file..." Seems to have trouble saving the temp files. tried dumping my workspace and prefs. No change. Other files work fine.

    Try deleting the iPod Photo Cache folder.  For its locations see:
    iTunes: Understanding the iPod Photo Cache folder

Maybe you are looking for