Double image when printing labels

I am copying in a graphic for Avery round labels. Everything looks fine on the screen, but when printed, some (not all) of the labels have the image, plus a smaller version of the image on top of it. Kind of like an inset. I have reloaded the printer software (I have an HP Photosmart c8180 All in one), used old avery forms, downloaded new avery forms, and a host of meaninless other things.  Any suggestions would be most welcome.

Hi, have you tried using another program to print the image?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • Address Book - how do I remove image when printing labels?

    Hi
    Just getting ready to print the Xmas card labels - thought i'd add an image in the Address Book 'Print' Dialogue - then changed my mind!!!
    Big mistake - there appears to be no (easy / obvious) way to remove the image!!!
    Any ideas please.
    Thanks

    I never could figure out how to do this via the GUI and had to resort to a bit of "trickery". i.e.:
    - quit the Address Book application.
    - in Finder, go to ~/Library/Preferences and double click
    on com.apple.AddressBook.plist ( or just type
    "open ~/Library/Preferences/com.apple.AddressBook.plist
    in a Terminal window
    - in the property list editor, delete the value for
    "ABImagePath" , which is under "0" in "ABCustomEnvelopeDefinitions"
    - save the file
    - quit the Property List Editor
    - start Address Book
    /cj
    various   Mac OS X (10.4.3)  
    various   Mac OS X (10.4.3)  
    various   Mac OS X (10.4.3)  
    various   Mac OS X (10.4.3)  

  • Missing field when printing labels with Address Book

    I am would like to print the labels for my clients Christmas Cards, using AddressBook. When doing print > label, I get all their names and addresses on the labal formt that I want but the company name is missing. How do I get AddressBook to include the field "company" into the label ?
    Thanks for help.

    If you need to include the company's and individual's name, here's a work-around:
    1) for each such card, you put the individual's name and leave the Company field empty.
    2) Put the company name in the field for "Street"
    3) Put the street address, including Apt. # in the field for "City"
    4) Now, put the City, State, and Postal Code all in one field: the field for "Country".
    5) save the card.
    When printing labels, proceed as follows:
    1) Print>File>choose your Avery label under "Layout" and then click "Label."
    2) Here, you make sure to check the box so it will "Print country." Don't forget this step, or the whole plan is a failure.
    This works, but it only works if the card is in-putted as described above. It won't work if your cards are already set-up with the "company" field and the "name" field.

  • Inverted images when printing pdf to Universal PDF driver

    Our company is beginning to use SSGD with two Windows XP instances (via RDP?). We deal largely with pdf forms that contain black & white bitmap image data. Within the SGD Windows instance, the pdf opens fine in Adobe Reader. Printing to any of the local printers configured on SGD is also fine. When printing to either of the Universal PDF print drivers (Printer or Viewer), however, the image portions of the document show up on the client side with inverted black/white.
    This occurs only for images embedded in the pdf. If I print the image as a separate bitmap file, it comes out fine on the client side.
    Any ideas?
    -dan

    what version of SGD and what version of Ghostscript do you have installed on the SGD server?
    $ tarantella version
    $ gs -V
    it may be that you have an older version of Ghostscript or not all the proper fonts installed
    http://docs.sun.com/source/820-6689/chapter5.html#d0e26763
    another thing to test is how the PS print job looks like before it gets converted by Ghostscript. You can pause the printing on SGD 'tarantella print pause' then look for the PS file on your Windows XP instance (c:\TEMP) is the usual location of the file. See if it is not being rendered properly. If it is not, then you would want to choose a different driver to use
    http://docs.sun.com/source/820-6689/appendix1.html#d0e49203
    try another driver and see if that makes a difference.

  • Missing images when printing to pdf from Word

    When printing to pdf from MS Word 2003 in some cases textboxes and/or images disappear in the target PDF, depending on their position.
    Word and Acrobat Standard are the latest updates. If the Word text is converted on a Mac the target pdf has the images present, so it looks like it's a Windows only problem. Any suggestions where to start looking for a fix?

    You may have to turn on "display large images" in the preferences.

  • Missing images when printing (in Word)

    I am wrapping up a very long report for a client, and have inserted a number of color images (JPG). I cannot for the life of me get them to print. They show up just fine in the print preview, but nothing actually shows up on the paper when I actually print the document. I have checked every setting I can think of, but nothing seems to be off. I have tried converting to PDF, but the images are missing in those, too.  I've also tried converting to a DOC file (rather than the current DOCX version)-- also a fail.  Does anyone know what the trick is to getting images to print in Word??? I'm at a total loss and it's driving me batty.
    Copying and reformatting the entire report into Pages will take FOREVER and I'm really hoping to avoid that.  Help!!!!
    Thanks. 
    Kacy

    Support for Microsoft Word - Microsoft Support

  • Center Image When Printing PDF?

    When we updated to X Pro, now when ever we print a PDF onto a paper larger than the file, it always puts the image in the upper left corner of the paper. There used to be a centering option, but now there is none. How do I get it to center the images when I print? Thank you.

    Does it show full page on the screen, or a small image there also?

  • Double Images when copied to CD

    I have an album of photos which I copied to CD in the following manner. I made a folder on my desktop and dragged (I may have exported them from iPhoto instead of dragging but at the moment I am not sure which I used) 68 photos to the folder. I then copied the folder to a CD and then burnt it. When I try to show it on a DVD player which plays CD jpeg images, it shows 119 photos. When it lists the jpeg's I find that about 49 of them are doubled up, ie: img1867, 1mg1868, etc and there is a total of 119 jpegs show up. When the CD is played, a blank screen appears on the double image, which stays on screen for quite some time, therefore ruining the effect of the images.
    The strange thing is, that when I put that disc into my eMac, it only shows 68 images in the folder. Any information would be appreciated. Thanks.
    PS One thing that I wonder about is that my digital camera had a numbering system that went up to 9,999. I have since gone over that mark, therefore I do have images that are starting to duplicate the original numbers in my iPhoto library. Also, my camera seems to be reverting to zero at times when I download a new set and I therefore have image numbers that are doubling and tripling up. I have my iPhoto library arranged by date, so I presume that is keeping the photos sorted properly even though there are similar image numbers.

    I have made another CD following your directions, ie: Make folder on desktop, drag photos from album into folder. I then dragged the images from the folder onto the CD and proceeded to burn it. When I tried playing it on my DVD player through a TV, it again doubled many of the images. (There should have been 68 images from the folder, but the readout on the TV (from the DVD player) indicates 119). I tried a CD that a Windows friend had burned with jpeg images on it and it performed flawlessly. One thing I did notice, was that the title of the Windows CD came up on screen, ie: 'Rockies 2005' along with the listing of the jpeg images, when the Stop button was pressed on the remote. Howevever in mine, the word (Root) in brackets appeared in lieu of a name. Would this be indicative of something? An error also comes up on screen 'Corrupt File'. So, the same problem exists. I hope there may still be Hope?! Thanks Peter and Bri. Cheers.

  • CS5 cropping A4 dimension images when printing with Artisan 1430

    Image dimension: 297mm x 210mm
    Printer settings: Borderless, A4 297mm x 210mm
    Adobe printer settings: Printer manages color management, No centre, No fit to page
    Result: lower portion of the image is cropped.
    Adobe printer settings: Printer manages color management, centre image, No fit to page
    Result: lower portion of the image is cropped.
    Adobe printer settings: Printer manages color management, No centre, fit to page
    Result: lower portion of the image is cropped.
    When printing same image from paint 6.1, the entire image is printed to a borderless A4 page.
    Please assist

    For problems with full Photoshop it's better to post in the Photoshop forum. This forum is for Photoshop Elements, the consumer version:
    http://forums.adobe.com/community/photoshop/general

  • Address Book freeze or crash when printing labels/envelopes

    I am trying to print mailing labels or envelopes from Address Book. I can print lists but everytime I try to print mailing labels it appears to go into a "sorting" loop and will not respond. When I try to print envelopes and hit print, it crashes. I have read about problems with smart groups but I have no smart groups. The last time I printed mailing labels I had no problem but my operating system at that time was Tiger. Any help?

    I created a second entry with the spouse's name, and then to be more selective in who I send them to (so that it isn't sent to both Jones'), I added the word "Christmas" to the notes for one of them only, repeated this process for all the contacts that I needed to. Then create a SmartGroup that is looking for Christmas in the notes and print labels for that group.
    Yeah, that zoom feature was completely out of whack when I was doing this too; actually, the preview pane was entirely off at times.
    Another useful thing would be to be to able to specify which spot on the sheet of labels to start printing; if I've got a partially used sheet, then its a total pain to be able to start printing on the 8th label down in the 2nd row; I'd have to create bogus entries for Mr. Aaa Aaa and copy that as many times as I need to so that the printing is correctly aligned. Pretty big oversight I must say.

  • Lines on image when printing Raw files

    Dear All
    I am trying to print Raw images.
    After converting and making my adjustments, I click on File > print (in the PSE editor) and then use the cursor to drag out the image to the size I want (roughly a 10 inch by 8 inch image to be printed on A4 paper). I then print it and it comes out with loads of parallel lines on the image.
    Any advice to correct this?
    Regards
    Jon CAmilleri

    Hello All
    I am managing to print out raw files fine after manipulating them in canons own software (Digital photo professional) but still getting bands when using PSE 7 raw converter? Any more advice?
    When sending to print in PSE a box comes up saying 'Some post-script specific settings (interpolation, calibration, encoding) will be ignored as you are printing to a non-postscript printer'  This box does not come up when printing from digital photo professional. Could this be the problem resulting in bands on the image and, if so, can it be corrected?
    Someone mentioned about Gamut problems - how do I alter/correct these?
    Also, with Raw files, after I have manipulated them (e.g to black and white) how can I perform other tasks (eg dodge and burn areas)  as it seems that PSE wont let me do this on a RAW image.
    Do I have to save it as a JPEG first ?   If so, what is the point in taking a RAW image in the first place if I am going to lose detail by converting it to a JPEG?
    Sorry for all the questions
    Regards
    Jon

  • Cropped images when printing

    Every Word document that contains a image (jpeg in most cases) gets cropped on two sides when printed, even though print preview reflects otherwise.  These are not new documents and printed fine with previous printer (Epson).  Called tech support and the rep was stumped although I see many posts in the forum about this.

    Hi dlmott27,
    Welcome to the HP Support forums.  I understand that documents printed previously with another brand are not printing correctly with your HP printer.
    To better assist you, would you please provide some further information:
    1)       What make/model/product number of HP printer do you have? Guide to finding your product number
    2)      How is the printer connected (USB cable, ethernet, or wireless)?
    3)      Are you printing the documents from the same program that was used to print the documents before? If not, what happens when you print using the same program?
    4)      What operating system are you using?  Is it the same operating system that was running when the documents were printed previously?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • When printing labels for each printed label a blank label comes out of the printer

    Hello Experts
    We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
    Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
    I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
    Thanks in advance and regards

    Hi,
    Please check below SAP note and let me know your feedback:
    1043235 - Label/thermal printers are not supported by SAP Business
    One
    Thanks & Regards,
    Nagarajan

  • Lines in images when printing from anything but iphoto

    When I print on my computer from anything but iphoto the quality is horrible and the print has very noticeable lines in it across everything. I recently did a layout in Adobe Illustrator and when I went to print it on regular 4x6 satin photo paper there are lines everywhere. This also happens when printing from powerpoint, photoshop, word, and whatever else that is not iphoto. I cant send out things that are printed at such horrible quality. Everything comes out fine when i print text in black but photos look pixelated and have lines in them no matter what paper I use if printed from anything but iphoto.
    HELP DR.

    Check the printer manual about calibrating. There is a solution in most drivers for inkjet printers which may call like paper forwarding or so. It seems, that your printer forwords the paper a bit to much before the line is printed.

  • Double image when exporting versions

    Hi, I exported a version of a RAW file to PS CS2 for editing with no problems but subsequently all other versions I exported from Aperture will have a double image of the initial file sandwiched together regardless whether I open it with Preview or PS. However, there are no such problem if I drag the thumbnail from Aperture to Desktop before opening it.
    What have I done wrong???

    Hi Firstlaunch,
    what I did was wrong. I should have used "Open with external editor" instead of "Export Versions", which is low res jpegs in my preference setting. Anyway, I then open these jpegs with PS CS2 and got on with my editing. The edited pics are then re-imported to Aperture and that's where the problem began. All exported jpegs from then on will have a double-image/multi exposure of the first pic I exported.
    I can't show you screen shot cos I've since trashed all the file on Aperture and re-installed everything. I still don't know what caused the problem but I'm doing it the right way now and everything's fine. Thanks.

Maybe you are looking for