Double item in printout in GR

HI SRM Gurs,
Everytime I print confirmation in SRM Web, item in printout repeats 3x. for example:
confirmation
1. blue ballpen    1pc   20.00
2. pencil      2pc   10.00
3.red ballpen    4pc   20.00
Printout:
1. blue ballpen      2pc   20.00
2. blue ballpen      2pc   10.00
3. blue ballpen    4pc   20.00
4. pencil    1pc   20.00
5. pencil      2pc   10.00
6. pencil    4pc   20.00
7. red ballpen    1pc   20.00
8. red ballpen    2pc   10.00
9. red ballpen    4pc   20.00
please help

Hello,
This can have technical (note 1042372, 881650, 939042, 1107036 (special case after upgrading), 820344 (output after order PO is changed), 1099046 and again 564826) or customizing reasons: First of all check customizing according to 564826. If the customizing in BBP_PO_ACTION_DEF and complains, that all old documents are now in a state of "not processed", the customer should run report RSPPFPROCESS.
Kind regards,
Gaurav
PLEASE GIVE FULL POINTS FOR USEFUL REPLIES

Similar Messages

Double item in GR print out

HI SRM Gurs,
Everytime I print confirmation in SRM Web, item in printout repeats 3x. for example:
confirmation
1. blue ballpen 1pc 20.00
2. pencil 2pc 10.00
3.red ballpen 4pc 20.00
Printout:
1. blue ballpen 2pc 20.00
2. blue ballpen 2pc 10.00
3. blue ballpen 4pc 20.00
4. pencil 1pc 20.00
5. pencil 2pc 10.00
6. pencil 4pc 20.00
7. red ballpen 1pc 20.00
8. red ballpen 2pc 10.00
9. red ballpen 4pc 20.00
please help

Hi,
Already replied on this in other forum.
Thanks and regards.,
Gaurav

I only purchase item 100 Line Coins $1.99 but it's double items ($3.98) in order

I only purchase item 100 Line Coins $1.99 but it's double items ($3.98) in order

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Double items CCM

Hi guys,
We're currently facing an issue with double items in CCM and I ran out of ideas.
The contentmanager has updated a catalog and published the Master. At first he didn't see the changes. He then removed the catalog, published the Master, uploaded the catalog again, performed the mapping, and published the Master again.
In TREXADMIN I can see that there are double items. But when I go to the positions of the catalog (via maintain catalog) I can only see the recent items as it should be.
So somewhere between maintaining en publishing the catalog something is not updated.
There are no errors in /CCM/CHECK_TREX
In table /CCM/D_CTLG_REQ there's only 1 active entry for Proces SE, Master catalog. This should be ok. There's also only 1 active entry for the concerning catalog with proces AI.
Checked table /CCM/D_PUB_ST, but there are no errors here. All publications are succesful.
Tabled /CCM/D_UPD_STATE gives me a result for this particular catalog with status 05 (completed), ok as well to my opinion.
Any ideas what to do in order to remove the double items in the catalog?
Thanks,
Timo

Hi Timo,
You should apply the following notes for correct operation of the CSE:
AP-CAT-AUT     1232769     Deleted model information retained in CSE after full pubn.
AP-CAT-AUT     1231427     Deleted view content retained in CSE after full publication
AP-CAT-AUT     1154194     Deleted items persist in CSE after full publication
Regards,
Jason

BOM is doubled in the printout against the billing doc

On the printout from the billing document, tarrif price for the BOM is doubled vs price on the billing doc in SAP.
What should I do here?

Hi.,
First check out at item catgories whether TAE is relevant for pricing or not,TAE should not be relevent for pricing for Mainitem level BOM,If the configurations are fine then check out once with your technical persons(ABAPERS),They do the need ful as there may be some problem in OUTput .,
REWARD if helpfull
Thanks & Regards
Narayana

Double items in list-view calendar iOS 7

Since I first opened the calander-app in iOS 7, some, but not all items are shown twice in the list-view, but not in the other views. If I delete one of the doubles, both are gone. It seems to be completely random what items are shown twice. Is it a bug? It happens both with iCloud and Exchange items. Both single and repeating appointments. I can not see any logic in it. Please help, because it makes the list-view very cluttered now...
Kind regards,
Piet

Okay, I don't understand why, but the problem seems to be induced by the update process. Though the other views are unaffected, some (a lot) items in the list-view are being doubled. It seems to be random, but both my iOS devices are affected in exactly the same way, so there must be a mechanism that causes it.
But... If you turn off the calendars for the affected accounts (iCloud, Exchange), confirm that they are being removed from your device, and then turning them on again, they are being re-synchronized. This creates new entries in the calendar that in the list-view are not doubled anymore.
Be careful! Do not delete the items manually, since this will delete the item on all synchronized devices. Just turn the calendars off in the account settings and choose not to keep them on your device but remove them from your device instead.
This will fix the problem quick and easy.
Kind regards,
Piet Groeneveld

Search result pagination loosing/doubling items

Hi,
my client is running Portal 10.1.2.0.2 (Build: 139) and has a custom search portlet on a page.
It's set up to search for items of a specific custom item type in one page group only.
When users search the results sometimes (maybe always) lacks some items and doubles some (same item shown twice).
I am a fairly experienced Portal developer and have verified this myself.
If I search for some word X I get 408 document hits. If the portlet is set to paginate the result at 200 hits per page I get 15 items doubled. The last 14 on page 1 (1-200) are the first 14 on page 2 (201-400). The last item on page 2 is the first on page 3 (401-408).
Next I set pagination to 150 and search for the same word. Still 408 hits. This time 9 on the first page (1-150) showed up on the second page as well (151-300) (this time not last/first but 4 "single" items after/before the doubles). The last 12 items on page 2 was the same as the first 12 on page 3 (301-408). A total of 21 doubles.
So I set pagination to 500 (all on one page) and serached for the word again. This time I'm unable to find any doubles.
As the total number of hits was constant, this means that the first pagination did not show 15 items and the second pagination lost 21.
I have searched the forums and MetaLink but found nothing.
Has anyone heard of this before?
Kind regards
Tomas Albinsson
Stockholm, Sweden

OK, a month later...
The same search word now gives 410 document hits (more docs have been added).
A pagination of 200 now gives 15 doubles on page one (last 15 is the same as first 15 on page two) and one double on page two (last item is the same as first on page three).
I set up a new custom search portlet, restricted it to just find items of a certain subtype and let the user search for text and select a year (custom attribute of the item type). Same result as the original search portlet.
If I select another year I just get 26 docs. If pagination is set to 50 I see them all and no doubles. Changing pagination to 5 items per page produces two doubles. The last two on page 3 (items 14-15) are the same as the first two on page 4.
Compared to the complete list I can see that items 14 and 15 are wrong, they hide two docs in those places in the complete list.
Next I turned off the subtype restriction (ie all types are OK), leaving just search text and year for the user.
The same search word that gave 26 above now gave 40 hits.
A pagination of 15 was fine.
A pagination of 10 was fine.
A pagination of 8 gave two doubles: the last on page 3 (item 24) was the same as the first on page 4 (item 25) and the last on page 4 (item 32) was the same as the first on page 5 (item 33).
A pagination of 24 gave one double: the last item on page 1 (item 24) was the same as the first on page 2 (item 25).
A pagination of 23 gave two doubles: the last two on page 1 (items 22-23) was the same as the first two on page 2 (items 24-25).
Next I turned off the year custom attribute LOV restriction, leaving only the search text (for items in one page group).
A search for three words gave 42 hits.
A pagination of 17 gave one double, the last item on page 1 (item 17) was the same as the first on page 2 (item 18).
This seems fairly easy to reproduce. A custom search portlet restricted to items in a page group.
Find search terms that give a reasonable number of hits. Set the pagination higher then the amount first, then to something that gives a few pages. The doubles seem to show up at the page "borders" (last/first on a page).
As I have only one environment I'd be happy if someone could test this.
Kind regards
Tomas

Remove double items (programs) from Open With menu??

Hello;
Since some disk perturbances and hooking up an external HD for backup there is one notorious issue in my Finder (Panther 10.3.9): All the applications are listed twice, overstuffing the right-click menu with double Safaris, double Previews and so on.
How do I get rid of this stuff? My Contextual Menu items' removal makes no difference (I have just two), as well as trashing the Finder preferences. Do I have any influence on how this list is being built?
I've searched Apple tech articles and this forum, to no avail. Somebody knows the solution? This is very annoying...
PowerBook G4 Alu 1.25GHz Mac OS X (10.3.9)

Try these:
1) Repair permissions using Disk Utility (Applications >> Utilities)
2) Repair Disk (Bootup from OS X Install Disk 1)
3) Clean System and User caches
4) Optimize the System
5) Update "whatis Mac OS X" database
Everything here except Repairing the Disk can be done with the freeware utility "OnyX" (www.titanium.free.fr). In OnyX, Tasks 1, 4, and 5 and be found in the "Maintenance" tab. Task 3 is found in the "Cleaning" tab. More in-depth info about these tasks can be found at my System Maintenance and General Troubleshooting guides:
System Maintenance: http://happymac.50webs.com/smx.html
General Troubleshooting: http://happymac.50webs.com/gtx.html
Indragie

Rejected items in printout-PDF sales order

Hi team,
Pls help me to solve it.
Due to many reasons we are rejecting the sales order in the system but the issue is that in some cases, we are not fully rejecting the sales orders only one or two items from sales order are rejecting and the other items are keep active in the sales order. In such cases, what happening is that while printing the profoma in PDF , the rejected item also appearing in the print out but it should not reflect in the PDF as we already rejected this item from the sales order.
Thanks for your valid comment to solve it.
Regards,
Vijesh

Dear Vijesh
if you want to restrict You can Use T.code OVAG
Go to OVAG - Deactivate the check Box For this function
Check this link ...Ignore Net Value of Rejected Item from Total Sales Order Value.
customization of Reason of rejection
Thanks a lot
Venu

Circle menu with doubled items onclick rotate to anchor

Hi all, I have a problem because I dont know from where i should start with this project.
-grey area is invisible
-white with pink stroke is site
-menu is black
-items are colored lines
-black dot is an "anchor point" where menu should rotate to that clicked item will be aligned (when i click yellow item > menu spin > clicked item is aligned with black dot)
As you can see there are multipled items and they will direct to the same part of the site but thats not a problem.
The main problem is that i dont know how to make menu spin that way that clicked item will always align next to anchor point.
If you have any idea/documents/plugins - i will be very greatful.

made you a starting template https://app.box.com/s/k9d9ivbpckg82me11wkp
if you click the lines it will rotate to it

Double items under the Apple

I now have TWO Restarts, TWO Shut Downs and TWO LOg Outs under the Apple [ at the left end of the system pull-downs ]. The first one of these pairs has three dots following the text.
How do I get rid of the extra items ??
Also, now there is a black border around the items I am working on. What is this and how do I get rid of it ??
Thanks.
Samuel

Sig-
It was really you direction to the Apple TIL that did the "trick" on a whole batch of problems.
I apologize, but I should have given you the "SOLVED" award and Daniel the "HELPFUL" award.
Thank you BIG TIME !!!!
Samuel
PS :: Will you be installing Snow Leopard, even with its email problems ??? I have the DVD coming next week, and I am debating whether to install it.

Playlist is doubled .... each list item is listed twice

12.1.0.5.0 iTunes up to date
All the items in my playlist listings are doubled: Diana Krall and Diana Krall 1 Dave Matthews and Dave Matthews 1 etc. Does this have something to do with the cloud or a setting. I delete the doubled item (followed by a 1) but if soon reappears.
Thanks
Barb

You're if statements aren't correct, As you have them now if the first
if result is equal to {"Co-Packer, 10.5oz"} then
doesn't fire none of the following if statements will be evaluated. What you want to do is use
if condition1 then
     statement1
else if condition2 then
     statement2
else if condition3 then
     statement3
else
     statement4
end
So you code becomes:
if result is equal to {"Co-Packer, 10.5oz"} then
         your code
else if result is equal to {"Co-Packer, 32.0oz"} then
     your code
else if result is equal to {"Co-Packer, Elixir"} then
     your code
end
Message was edited by: Frank Caggiano - Added example from OP's code

PO will not print if line items are trash-canned

Hello,
We have an instance where we had to cancel both line items on a PO. However, the system will not allow a printout, since there are no line items. How can we get a printout to send to the vendor to confirm that both line items are cancelled? Config looks right. Deletion is a change relevant field, but the system displays a message when trying to print 'no print relevant information changed'.
Please advise.
Thank you.

Yes. We get change messages when qty or delivery date is changed, but for some reason, when you delete all line items, it doesn't generate any change. The checkbox is not checked therefore we can't print. If only 1 item is deleted, then it's OK, but if you delete all items, no printout.

VL10C double delivery notes for one sales order

Dear all,
Currently we encountered an very strange issue in our SAP. we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
does anyone have a clue on this issue? your effort and feedback will be most applicated!
Thanks & Best Regards,
Kyo NG

Hi,
I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
Regards,
Eduardo

Need double buffering enabled if I print a JTable

Hi @ all
I have printed a very large JTable. The Problem is if I disable double
buffering the horizontal lines move after some pages.
If I enable double buffering the printout looks very bad(as all know).
But the horizontal lines are OK!
You can produce this failure with the print tutorial(and a large table).
Has someone an idea how I can fix my bug ?
many thanks for helping

may be you have to disable double buffering generaly to all the element envolved in the printing component, try this:
private void setDoubleBuffering(Component c, boolean isEnabled) {
RepaintManager manager = RepaintManager.currentManager(c);
manager.setDoubleBufferingEnabled(isEnabled);
}

Double item in printout in GR

Similar Messages

Maybe you are looking for