Double items CCM

Hi guys,
We're currently facing an issue with double items in CCM and I ran out of ideas.
The contentmanager has updated a catalog and published the Master. At first he didn't see the changes. He then removed the catalog, published the Master, uploaded the catalog again, performed the mapping, and published the Master again.
In TREXADMIN I can see that there are double items. But when I go to the positions of the catalog (via maintain catalog) I can only see the recent items as it should be.
So somewhere between maintaining en publishing the catalog something is not updated.
There are no errors in /CCM/CHECK_TREX
In table /CCM/D_CTLG_REQ there's only 1 active entry for Proces SE, Master catalog. This should be ok. There's also only 1 active entry for the concerning catalog with proces AI.
Checked table /CCM/D_PUB_ST, but there are no errors here. All publications are succesful.
Tabled /CCM/D_UPD_STATE gives me a result for this particular catalog with status 05 (completed), ok as well to my opinion.
Any ideas what to do in order to remove the double items in the catalog?
Thanks,
Timo

Hi Timo,
You should apply the following notes for correct operation of the CSE:
AP-CAT-AUT     1232769     Deleted model information retained in CSE after full pubn.
AP-CAT-AUT     1231427     Deleted view content retained in CSE after full publication
AP-CAT-AUT     1154194     Deleted items persist in CSE after full publication
Regards,
Jason

Similar Messages

I only purchase item 100 Line Coins $1.99 but it's double items ($3.98) in order

I only purchase item 100 Line Coins $1.99 but it's double items ($3.98) in order

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Double items in list-view calendar iOS 7

Since I first opened the calander-app in iOS 7, some, but not all items are shown twice in the list-view, but not in the other views. If I delete one of the doubles, both are gone. It seems to be completely random what items are shown twice. Is it a bug? It happens both with iCloud and Exchange items. Both single and repeating appointments. I can not see any logic in it. Please help, because it makes the list-view very cluttered now...
Kind regards,
Piet

Okay, I don't understand why, but the problem seems to be induced by the update process. Though the other views are unaffected, some (a lot) items in the list-view are being doubled. It seems to be random, but both my iOS devices are affected in exactly the same way, so there must be a mechanism that causes it.
But... If you turn off the calendars for the affected accounts (iCloud, Exchange), confirm that they are being removed from your device, and then turning them on again, they are being re-synchronized. This creates new entries in the calendar that in the list-view are not doubled anymore.
Be careful! Do not delete the items manually, since this will delete the item on all synchronized devices. Just turn the calendars off in the account settings and choose not to keep them on your device but remove them from your device instead.
This will fix the problem quick and easy.
Kind regards,
Piet Groeneveld

Search result pagination loosing/doubling items

Hi,
my client is running Portal 10.1.2.0.2 (Build: 139) and has a custom search portlet on a page.
It's set up to search for items of a specific custom item type in one page group only.
When users search the results sometimes (maybe always) lacks some items and doubles some (same item shown twice).
I am a fairly experienced Portal developer and have verified this myself.
If I search for some word X I get 408 document hits. If the portlet is set to paginate the result at 200 hits per page I get 15 items doubled. The last 14 on page 1 (1-200) are the first 14 on page 2 (201-400). The last item on page 2 is the first on page 3 (401-408).
Next I set pagination to 150 and search for the same word. Still 408 hits. This time 9 on the first page (1-150) showed up on the second page as well (151-300) (this time not last/first but 4 "single" items after/before the doubles). The last 12 items on page 2 was the same as the first 12 on page 3 (301-408). A total of 21 doubles.
So I set pagination to 500 (all on one page) and serached for the word again. This time I'm unable to find any doubles.
As the total number of hits was constant, this means that the first pagination did not show 15 items and the second pagination lost 21.
I have searched the forums and MetaLink but found nothing.
Has anyone heard of this before?
Kind regards
Tomas Albinsson
Stockholm, Sweden

OK, a month later...
The same search word now gives 410 document hits (more docs have been added).
A pagination of 200 now gives 15 doubles on page one (last 15 is the same as first 15 on page two) and one double on page two (last item is the same as first on page three).
I set up a new custom search portlet, restricted it to just find items of a certain subtype and let the user search for text and select a year (custom attribute of the item type). Same result as the original search portlet.
If I select another year I just get 26 docs. If pagination is set to 50 I see them all and no doubles. Changing pagination to 5 items per page produces two doubles. The last two on page 3 (items 14-15) are the same as the first two on page 4.
Compared to the complete list I can see that items 14 and 15 are wrong, they hide two docs in those places in the complete list.
Next I turned off the subtype restriction (ie all types are OK), leaving just search text and year for the user.
The same search word that gave 26 above now gave 40 hits.
A pagination of 15 was fine.
A pagination of 10 was fine.
A pagination of 8 gave two doubles: the last on page 3 (item 24) was the same as the first on page 4 (item 25) and the last on page 4 (item 32) was the same as the first on page 5 (item 33).
A pagination of 24 gave one double: the last item on page 1 (item 24) was the same as the first on page 2 (item 25).
A pagination of 23 gave two doubles: the last two on page 1 (items 22-23) was the same as the first two on page 2 (items 24-25).
Next I turned off the year custom attribute LOV restriction, leaving only the search text (for items in one page group).
A search for three words gave 42 hits.
A pagination of 17 gave one double, the last item on page 1 (item 17) was the same as the first on page 2 (item 18).
This seems fairly easy to reproduce. A custom search portlet restricted to items in a page group.
Find search terms that give a reasonable number of hits. Set the pagination higher then the amount first, then to something that gives a few pages. The doubles seem to show up at the page "borders" (last/first on a page).
As I have only one environment I'd be happy if someone could test this.
Kind regards
Tomas

Volume Based Price Item CCM 2.0

Hi,
We are trying to upload items with the Volume Based Price Item. So we have/CCM/PRICE[2]#/CCM/AMOUNT, /CCM/PRICE[2]#/CCM/CURRENCY_CODE /CCM/PRICE
[2]#/CCM/LOWER_BOUND and so on. But when we buy a Volume Based Price Item the Price doesnt change according to the quantity.
We were wondering whether the problem is that we need an Aditional Optional Parameter in the Integrated Call Structure as we had done with the Minimum Order Quantity characteristic. Or we have to customize any
other parameter in order to get a different price depending on the quantity that we buy.
THANKS!!!!

Chris,
This morning I also posted another message asking help for Interval for Quantity issue.
When we upload items with the Interval for Quantity characteristic (/CCM/QUANTITY_INTERVAL).Then, when we use the Shopping Tool to buy them we can buy quantities that are not included in the interval. For example if we set 10 as the Quantity Interval and we try
to buy 15 units, we dont get any error.
Any idea? Could you tell us which OCI Field we have to assign to this characteristic. We were also wondering whether the problem is that we need an Aditional OCI (as we had done with the Minimum Order Quantity characteristic). Or whether we need to activate a BAdi.
THANKS in ADVANCED!!!! and THANKS AGAIN FOR YOUR HELP WITH THE VOLUME BASED PRICE ITEMS!!!!

Remove double items (programs) from Open With menu??

Hello;
Since some disk perturbances and hooking up an external HD for backup there is one notorious issue in my Finder (Panther 10.3.9): All the applications are listed twice, overstuffing the right-click menu with double Safaris, double Previews and so on.
How do I get rid of this stuff? My Contextual Menu items' removal makes no difference (I have just two), as well as trashing the Finder preferences. Do I have any influence on how this list is being built?
I've searched Apple tech articles and this forum, to no avail. Somebody knows the solution? This is very annoying...
PowerBook G4 Alu 1.25GHz Mac OS X (10.3.9)

Try these:
1) Repair permissions using Disk Utility (Applications >> Utilities)
2) Repair Disk (Bootup from OS X Install Disk 1)
3) Clean System and User caches
4) Optimize the System
5) Update "whatis Mac OS X" database
Everything here except Repairing the Disk can be done with the freeware utility "OnyX" (www.titanium.free.fr). In OnyX, Tasks 1, 4, and 5 and be found in the "Maintenance" tab. Task 3 is found in the "Cleaning" tab. More in-depth info about these tasks can be found at my System Maintenance and General Troubleshooting guides:
System Maintenance: http://happymac.50webs.com/smx.html
General Troubleshooting: http://happymac.50webs.com/gtx.html
Indragie

Double item in GR print out

HI SRM Gurs,
Everytime I print confirmation in SRM Web, item in printout repeats 3x. for example:
confirmation
1. blue ballpen 1pc 20.00
2. pencil 2pc 10.00
3.red ballpen 4pc 20.00
Printout:
1. blue ballpen 2pc 20.00
2. blue ballpen 2pc 10.00
3. blue ballpen 4pc 20.00
4. pencil 1pc 20.00
5. pencil 2pc 10.00
6. pencil 4pc 20.00
7. red ballpen 1pc 20.00
8. red ballpen 2pc 10.00
9. red ballpen 4pc 20.00
please help

Hi,
Already replied on this in other forum.
Thanks and regards.,
Gaurav

Double item in printout in GR

HI SRM Gurs,
Everytime I print confirmation in SRM Web, item in printout repeats 3x. for example:
confirmation
1. blue ballpen    1pc   20.00
2. pencil      2pc   10.00
3.red ballpen    4pc   20.00
Printout:
1. blue ballpen      2pc   20.00
2. blue ballpen      2pc   10.00
3. blue ballpen    4pc   20.00
4. pencil    1pc   20.00
5. pencil      2pc   10.00
6. pencil    4pc   20.00
7. red ballpen    1pc   20.00
8. red ballpen    2pc   10.00
9. red ballpen    4pc   20.00
please help

Hello,
This can have technical (note 1042372, 881650, 939042, 1107036 (special case after upgrading), 820344 (output after order PO is changed), 1099046 and again 564826) or customizing reasons: First of all check customizing according to 564826. If the customizing in BBP_PO_ACTION_DEF and complains, that all old documents are now in a state of "not processed", the customer should run report RSPPFPROCESS.
Kind regards,
Gaurav
PLEASE GIVE FULL POINTS FOR USEFUL REPLIES

Circle menu with doubled items onclick rotate to anchor

Hi all, I have a problem because I dont know from where i should start with this project.
-grey area is invisible
-white with pink stroke is site
-menu is black
-items are colored lines
-black dot is an "anchor point" where menu should rotate to that clicked item will be aligned (when i click yellow item > menu spin > clicked item is aligned with black dot)
As you can see there are multipled items and they will direct to the same part of the site but thats not a problem.
The main problem is that i dont know how to make menu spin that way that clicked item will always align next to anchor point.
If you have any idea/documents/plugins - i will be very greatful.

made you a starting template https://app.box.com/s/k9d9ivbpckg82me11wkp
if you click the lines it will rotate to it

Double items under the Apple

I now have TWO Restarts, TWO Shut Downs and TWO LOg Outs under the Apple [ at the left end of the system pull-downs ]. The first one of these pairs has three dots following the text.
How do I get rid of the extra items ??
Also, now there is a black border around the items I am working on. What is this and how do I get rid of it ??
Thanks.
Samuel

Sig-
It was really you direction to the Apple TIL that did the "trick" on a whole batch of problems.
I apologize, but I should have given you the "SOLVED" award and Daniel the "HELPFUL" award.
Thank you BIG TIME !!!!
Samuel
PS :: Will you be installing Snow Leopard, even with its email problems ??? I have the DVD coming next week, and I am debating whether to install it.

Playlist is doubled .... each list item is listed twice

12.1.0.5.0 iTunes up to date
All the items in my playlist listings are doubled: Diana Krall and Diana Krall 1 Dave Matthews and Dave Matthews 1 etc. Does this have something to do with the cloud or a setting. I delete the doubled item (followed by a 1) but if soon reappears.
Thanks
Barb

You're if statements aren't correct, As you have them now if the first
if result is equal to {"Co-Packer, 10.5oz"} then
doesn't fire none of the following if statements will be evaluated. What you want to do is use
if condition1 then
     statement1
else if condition2 then
     statement2
else if condition3 then
     statement3
else
     statement4
end
So you code becomes:
if result is equal to {"Co-Packer, 10.5oz"} then
         your code
else if result is equal to {"Co-Packer, 32.0oz"} then
     your code
else if result is equal to {"Co-Packer, Elixir"} then
     your code
end
Message was edited by: Frank Caggiano - Added example from OP's code

Content Tables in CCM 2.0

Hi guys,
Can anyone indicate in which tables in CCM 2.0 the content is stored for:
Supplier catalogs
Product Catalogs
Contract catalogs
We installed CCM 2.0 in the same client as SRM 5.0
Thanks,
Aart

Hi,
Here are the table which i have seen.
/CCM/D_CTLG                        Catalog Header
/ccm/d_schm                          Schema header
/CCM/D_CTY_ITMAP               Category Mapping of an Item
/CCM/D_ITM                            Catalog Item Header Data
/CCM/D_ITM_H                        History of Catalog Item Hea
/CCM/D_ITM_ITM_R                 Catalog Item - Catalog Item
Cheers, Renga

VL10C double delivery notes for one sales order

Dear all,
Currently we encountered an very strange issue in our SAP. we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
does anyone have a clue on this issue? your effort and feedback will be most applicated!
Thanks & Best Regards,
Kyo NG

Hi,
I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
Regards,
Eduardo

Attachements in CCM

Hallo,
I have a question, if attachements can be added to catalog item(CCM 2.0), for example in PDF form. I need to give purchasers more specific info about the purchasing item. attachements sounds like a good idea but I am not sure if it is possible.
Can anybody help?
Thanks
Jaroslav

Hi Jaroslav,
Pls see this link
Re: Including attachments in CCM
Upload your PDF Documents in MIME Repository in your Catalog System.
with file Type :PDF File (Adobe Acrobat Exchange/Reader) then add the file name and description to Catalog Characteristic eg:ITEM_DESCRIPTION_FILE#/CCM/MIME_TYPE
ITEM_DESCRIPTION_FILE#/CCM/DESCRIPTION
(or)
To Include Images and pdf documents
You use this function to include images and pdf documents in your catalog system . These images are displayed in SAP Catalog Search Engine.
You include images in your catalog by specifying the URL where the image is stored. You cannot include the image files themselves in the catalog. The information required to display an image is contained in the complex characteristic ATTACHMENT, which consists of the characteristics /CCM/DESCRIPTION and /CCM/URL.
You can fill the ATTACHMENT characteristic by:
Uploading the data to the supplier catalog
Entering the data manually in the master catalog or in a procurement catalog
Prerequisites
The catalog in which you want to include images must contain the ATTACHMENT characteristic.
You can create the ATTACHMENT characteristic in two ways:
You can upload the characteristic using CSV 2.0 format or using the XML format that corresponds to the SAP message type CatalogueUpdateNotification.
Once you have triggered the creation of the ATTACHMENT characteristic in the supplier catalog, you can:
Upload the description and URL for the images to the supplier catalog using any of the supported formats for SAP Catalog Authoring Tool (CSV1.0, CSV2.0, BMEcat, eCX XML, or the XML format that corresponds to the SAP message type CatalogueUpdateNotification)
Map the characteristic to the master catalog and procurement catalogs to enable you to fill the characteristic manually
With regards,
mahesh

Hot synch problem - Palm Z22 - stalls on Date book synch....

I have a palm Z22. I've had it for several years. Recently, I downloaded 6.2.
When I hotsync, everything comes up as it should but it freezes on the datebook synch.
Here's what gets done in a nano second:
Package installer
Install
Install Service Templates
Install to card
Hot Synch Exchange
Date Book - it aways stops here....13 green bars, 2 of 12 complete.
Does anyone know how to correct it?
Thanks,
sdm
Post relates to: Palm Z22
This question was solved.
View Solution.

When I hotsync, and the display pops up, I seem to have some double items....
My previous problem (fixed by dbfixit as suggested on this forum) was the hot sync was stalling on the second date book.
I see that when it's hotsyncing, it is checking off one at a time...
Should I delete the duplicates and how do I do that. (they are not listed as duplicates on my hand held that I can see.
All this is hard work for me, so appreciate this forum and all your help. sdm
Package Installer
Install
Install Service Templates
Install to Card
Date Book
Date Book
Address book
Address book
To do list
To do list
Memo Pad
Memo Pad
Addit

Double items CCM

Similar Messages

Maybe you are looking for