Double massage in sxmb_moni
Hello,
I have scenario RFC to FTP.
When I check the massages in SXMB_MONI.
I found 1 massage that appear twice.
From the first time until the second one passed 30 minutes.
I talk with ABAP programmer that made this RFC and he tell me that is not possible to sent 1 massage 2 time.
Any idea how it possible?
Regards
Elad
Hi,
Have a look to the FTP adapter monitor and check if this message is twice.
go to http://<server>:<port>/rwb/index.jsp and go to communication channel monitor.
Good luck.
Similar Messages
-
Hi Experts......
I need some help in Invoicing. Actully when user is entring the purchase invoice first time then
it works properly but to avoid double entry of same invoice is there any solution?
Or is there any way how to get atleast an alert massage that 'you have already created this invoice
do you want to continue?'
Thanks & Regards,
Rahul.........Hi Rahul,
Use Drag & Relate functionality.Drag the Customer/Vendor code and relate to the Invoice it shows the
list of invoices are booked in particular customer/vendor.in that list use filter options with the posting date.
*Close the thread if issue solved.
Regards
Jambulingam.P -
Unable to see pipe line steps in the SXMB_MONI
HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier -
Hi,
I am facing a small problem in XI. Could you please help me out for the same.
The problem is like
for a XI type communication channel for sender FTP I see following error in SXMB_MONI -
Unable to read user password from communication channel of type Error when accessing the secure store (access ID = 3650CAFA1FBAA04E8F260C6C4C1923FA) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023).
Could anyone of you please let me know what could be the problem here. I have specified the correct user name and pwd in communication channel.
Thanks,First of all, u have to access the J2EE server. So go to the system where XI is installed.
Now ConfigTool can be used in 2 ways. The easier one is GUI Config Tool. After installing the SAP Web AS Java, a configtool directory is created, containing a configtool script file. U have to double click it to open.
Then see this
http://help.sap.com/saphelp_nw04/helpdata/en/4e/d1cf8d09a94ae79319893c2537d3a0/frameset.htm
Now specific to ur requirement, c this
http://help.sap.com/saphelp_nw04/helpdata/en/c4/c13230eea54e7996b89fecef904a1c/frameset.htm
Regards,
Prateek -
Some interfaces are not shown in the sxmb_moni
Hi all,
We are facing the following scenario: we have one interface in XG1 (development environment) which is very simple: it consists of a sender File and a receiver IDOC. The file format has been double checked and apparently is what XI defines but when we execute, we can not see anything in the sxmb_moni and if we look into the adapter monitor -> file adapter, we can see that the sender seems to execute successfully but the receiver still shows the following: no message processing until now. So no IDOC is generated and no xml message can be seen in the TCODE sxmb_moni.
Also we have some interfaces that has file receivers and we have the same problems. So, for any reason, the receivers are not working properly. I have refreshed CPACache but the error persists.
It is preventing a whole team of doing some tests and as the golive date (March-April) is approaching it is impacting us in a strong way.
Could you please give us some support?
XIAFUSER is getting locked periodically (i see it in the SLD user management), do you think it will be the main reason of this?
Thanks in advance and kind regardsHi,
Go to Tcode SXI_CACHE for refreshing the Directory Caches. Go to Adapter Engine link and refresh the same
Go thru following threads may be useful.
Message not seen in SXMB_MOni
Missing Messages - in RWB but not sxmb_moni
For Adapter Engine you can do as below.
http://<host>:<port>/CPACache/refresh?mode=full|delta
In addition to above..
Go thru following link about Processed XML messages.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9a5c3bab977239e10000000a114084/frameset.htm
Just add on info.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/6baeae38391a6ee10000000a11466f/frameset.htm
Hope this helps..
Regards,
Moorthy -
ABAP runtime error in sxmb_moni when SOAP message has header with some tags
Hi!!!
I have a problem with sxmb_moni transaction.
If I double-click on a successfully processed
message, then this monitor can't show me
the message details but fails with the following error:
<COPY_AND_PASTE_FROM_SCREEN>
Runtime errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Occurred on 02.03.2005 at 16:44:21
Access with 'ZERO' object reference not possible.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PROP_STRING============CP " had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
</COPY_AND_PASTE_FROM_SCREEN>
This situation takes place only when I want
to look at a SOAP message which was sent to XI
from .Net platform or was sent to
.Net platform from XI (via SOAP adapter).
In all other cases sxmb_moni works fine.
I know that the problem is connected with some tags from Header record of SOAP message:
<soap:Header>
<wsa:Action>http://aaa.bbb.ccc/MessageResponse</wsa:Action>
<wsa:MessageID>uuid:1838f870-1688-4cfe-8c4f-afe14d98c515</wsa:MessageID>
<wsa:RelatesTo>uuid:308b950f-8cff-4b63-9861-93b041825f9d</wsa:RelatesTo>
<wsa:To>http://schemas.xmlsoap.org/ws/2004/03/addressing/role/anonymous</wsa:To>
<wsse:Security>
<wsu:Timestamp wsu:Id="Timestamp-389847df-8760-4d57-9777-6ce159d85205">
<wsu:Created>2005-03-02T08:54:29Z</wsu:Created>
<wsu:Expires>2005-03-02T08:59:29Z</wsu:Expires>
</wsu:Timestamp>
</wsse:Security>
</soap:Header>
If I take a SOAP message I have problem with, and
I remove all tags from this Header (or remove
the whole Header) and send it from any XML editor
that can send SOAP messages then sxmb_moni hasn't
any problems with showing me details of a such message.
Any hints how to force a .Net platform not to send
a such header or how to force sxmb_moni transaction
not to fail if a such header occurs?
Regards,
Andrzej FiluszHi Santhosh
1.Check your authorization settings in XI and R/3. Whether the user has sufficient rights to execute the Function Module etc. This is the most common reason for this error.
2.If the XI system was brought online even before the R/3 system then re-activate the communication channels from the Integration directory.
Cheers..
Vasu
<u><i><b>** Reward Points if found useful **</b></i></u> -
Meaning of Fields in SXMB_MONI
Hi All,
I have some confusion about the information displayed in transaction SXMB_MONI. Can you help to confirm whether my understanding is correct?
1. In synchronous scenario, one typical Caller -> XI -> Callee procedure will have 4 messages logged in SXMB_MONI. They are as following:
Sender (message sent from sender adapter to IE)
Response (resposne message from IE to sender adapter)
Central (message sent from IE to receiver adapter)
Response (message sent from receiver adapter to IE)
Sender and central messages share a message ID. The two response messages share one ID.
Is my understanding correct?
2. In asynchronous scenario, one typical Sender -> XI -> Receiver procedure has 1 message logged.
That message contains 2 parts CENTRAL and PE_ADAPTER. What's the meaning of these two parts?
That message can be divided into inbound message, receiver grouping, response and call adapter. What's the meaning of each part?
Thanks + Best Regards
JeromeThanks for the explanation.
I checked the pipeline SAP_CENTRAL. It contains the following pipeline steps:
Receiver Identification
Interface Determination
Message Branch According to Receiver List
Request Message Mapping
Technical Routing
Call Adapter
Request Message Mapping
But in SXMB_MONI, I double click on the "central" item in the left-top window and didn't find the last pipeline step "Request Message Mapping". By double clicking on the "response" item, I found there's a "Request Message Mapping" after the "Call Adapter". May I aske what's the reason for such a display?
Thanks, Jerome
Message was edited by: Jerome Zhao -
Double dot in file from mail sender channel
Dear All,
I have a volatile problem in mail channel with receiving xml file as attachment.
The flow is: Mail with attached XML file (ORDER05 in xml format) --> XI --> Idoc
Sometime, may be for one percent of mails, mapping receives from channel double dots in fields with quantity(1..000 instead of 1.000). If I resend the same mail again, it is processed without errors.
Have somebody faced with such problem? What can be decision of this problem?
I've recreated communication channel - it didn't help.
Thank you in advance
LevDear Prateek,
Looking at payload after channel I see double dot and same picture in RWB and in SXMB_MONI. I can see right payload only in the mail, which I receive on my own mail address (as CC). If I resend this mail from my Outlook address, channel work properly.
But this problem appear rarely, may be in one percent cases and only with mail from one particular vendor. The same channel is used for 3 vendors.
I don't use custom modules in channel, only 2 standard modules:
localejbs/AF_Modules/PayloadSwapBean
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
Regards
Lev -
Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.
Hi Experts,
All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
Could anyone please help me how to fix this issue.
Thanks in advance,
GRKHi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish -
SXMB_MONI : Error in Persistence Layer : XML Message Not Found
Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V JayachandraHi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish -
SXMB_MONI - Message has error on outbd. side
Hello,
We have occurences when interfaces appear to be successful in the SXMB_MONI monitor for processed xml messages. The status flag = successfull. But there is a column just in front of "Message ID" that also has another status flag.
When this flag is red and you hover over it, it shows the following "Message has error on outbd. side". How can we locate a corresponding log and get some more detail behind this message? We cannot seem to connect the dots between this red flag and a corresponding log entry to give us details of the problem.
When it says "outbound", which system should we be examining (PI or the receiving system)?
Thank you,
JohnHi,
Select the Messge in MONI and MenugotoOutbound Channel monitor
Double Click on the Idoc Number, this will take you to SM58 Screen
Here you can be able to seee the reason why it got errored out at Outbound Side.
Now in SM58Edit-Execute LUWs
Selection screen will appear and here select all the check boxes irrespective of any Error and select the date that when these message got into Error state and all.
And Now Execute that either in Foreground or in Background
This will execute all the Errored messages at Outbound side will process and the Idocs will reach to R/3
XI : How to Re-Process failed XI Messages Automatically
Regards
Seshagiri -
Queue stopped in sxmb_moni
Hi,
I am getting the problem in sxmb_moni when the XML message goes from one integration process to SOAP adapter and a mapping is called.The queue status is Queue Stopped. When i click on that queue it shows status as SYSFAIL.When i double click on that queue again it shows Status Text
as "XI Error CLIENT_SEND_FAIL . INTERNAL :Queue Stoppe ".
And the trace for that message is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>35</SAP:P1>
<SAP:P2>HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 35, error text: HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please help me with this issue...Queue Stopped
For your message processing in sxmb_moni...in the Qstatus column you will be seeing a red circle with stop written in it...
->double click it
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
Regards,
Abhishek. -
hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur -
No payload,details in SXMB_MONI
Hi,
I am not able to see any payload in sxmb_moni,I can see the msg processed success and failure ,when I click the flag and go in I do not see any details or payload on the right hand side of the screen,I can only see the msg on the left hand side.What could be the problem?
ThanksHello,
on the left side under Inbound Message should be three folders (SOAP Header, SOAP Body, Payloads), under Payloads you should find it (with double click).
Regards
Patrick -
Seeburger X.400 messages stuck in SXMB_MONI
Dear experts,
I am getting order messages from a partner who sends those via X.400.
So I do have a Seeburger X.400 sender adapter:
Payload Mode: "Attachment"
Attachment alias: "attachment"
Encoding: "binary"
MODULE: only "localejbs/CallSapAdapter"
But the messages are always stuck in SXMB_MONI!
I get the MONI error:
Runtime exception occurred during application mapping com/sap/xi/tf/_X_ORDERS_TO_I_ORDERS02_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Parsing an empty source. Root element expected!
But when I look at the payload the XML file is displayed correctly, it is encoded in ISO-8859-1.
Where I double click the payload entry in MONI it says "attachment#0001 ( application/octet-stream )" though. Normally it should say
"attachment#0001 (application/xml)"!
I have already taken the XML message and tested it in message mapping and operation mapping and both work fine!
Does anyone have an idea? Why would PI not find the root element?
Thank you very much for any hints and best regards,
PeterHello Ramesh, Hello experts,
I now got an answer from the sender.
They set "application/octet-stream" for each message they send because they mostly do not know what file type the messages are.
I assume if this was "application/xml" I would not have a problem. The sender says he can not change this though. They do get a new X.400 system middle of 2010 and might be able to do more settings then but I do not want to wait so long.
> Is there anything I can do to change the file type "application/octet-stream"?? <----
Thank you again or anyone that has an idea!
Best regards,
Peter
Edited by: Peter Wallner on Mar 31, 2010 3:25 PM
Maybe you are looking for
-
Account Name = "Other..." ??? I've got the Solution
There are two ways you can go about resolving this issue. 1. Follow the steps here: http://docs.info.apple.com/article.html?artnum=306840 or (as was the case with me and the above didn't work, Apple Support was very helpful - so here I am returning t
-
Hi friends, I need a material report. first column field discription and next 7 columns material info for eg if it has 20 records it should display in 3 pages e.g In Page -1 material M100 M200 M300 Qty 1 4 7 UOM
-
HI Experts, I have done some changes in DEV for Change tracking for my repository. I dont see option in CTS+ to transport change tracking to QA. I am doubting that CTS+ canot support change tracking settings. Could you please let me know how should t
-
Traffic light in Module Pool screen
How to display traffic light in a module pool screen
-
Problem connecting to Oracle 10g express on linux SUSE
Peace upon you, I have downloaded the RPM file and installed it , but when i try to log in the home page using "Go to database home page" the browser says that the page is not found. And when i type in the terminal : ./oracle-xe status the terminal s