Double Post --Discard this

Sorry double post accidently.
Edited by: Cole1988 on Apr 18, 2008 10:57 PM

Haven't you had all your cappos today Karsten (or maybe too many)?
John

Similar Messages

Double posting, sorry (This post is empty)

Empty

Hello,
Welcome to the forum.
I'd like to look into this for you, can you send us your details so we can look into this? If you click on my username you'll be able to get our "Contact us" form.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

(edited)pls delete this. sorry for double post.

pls delete. sorry for double post.

the many options in 'Export with Quicktime...' offer you .aiff as format.. which is the audio-only of your project.. drag that into iTunes/Toast/Jam/whatever CD-authoring you're using and you get an audioCD of the iM-project..
but that is a single-track, whole-gig-in-once CD ... little convenient (I would prefer seperate tracks).. so, I guess, you have to edit that .aiff export first in some app, ... I'm just an average iLife User, my preferred tool is Garageband... but, for sure, any other audio-processor, as Logic, is able to handle that with a snap..
just to feed my curiosity: what spurred you to give yourself such a nic??

Double posting of payment

hi,
i badly need help. where should i start looking on the error of double posting of payment? after the reconciliation with our book balance for the month of december, it was found out that there appeared a floating reconciling item which turned to be a double posted payment. how do i resolve this?
thanks!
gladys

Hi
Normal business solution is to enter a correction invoice with the distribution reversed and knock off the extra payment. I don't know if there is a better way to handle this in Oracle.
Thanks
Ramaswamy

Oracle - Using XML in Oracle/ SORRY double Post

SORRY for double Post!
Good Morning!
I wanted to insert some xml Data into my Orcale XML DB:
First of all I registered 2 Schemas required for the XML, like this:
Begin
DBMS_XMLSCHEMA.registerSchema(
schemaURL => 'Mailpiece_Processing/oif_dtypes',
schemaDoc => bfilename('XML_TEST','oif_dtypes.xsd'));
End;
then Created a table:
Create table XML_default auf XMLType
then inserted XML like this:
insert into xml_default
values
XMLTYPE
Bfilename ('XML_TEST', 'Test.xml'),
nls_charset_id('AL32UTF8'
Now to my question: Oracle is offering more than one possebility to save XML into its DB. If I import XML like this, is it called CLOB Storage or object relational?
Thanks in advance
runkel
Message was edited by:
user623693
Message was edited by:
user623693

Hi ,
I can only give u a few examples here but for the full sytanx and features of this powerful feature u may have to refer to some documentation online or read a book on XML within Oracle Database.
Let me try a few examples here
1) To extract the data from XML document an SQL plus command is available in XML DB. This feature is available from 10G onwards
example : select xmlelement(name,ename) from emp
Output will look like
<NAME>SMITH </NAME>
<NAME> JOHN </NAME>
<NAME> JONES </NAME>
2) CREATE TABLE FAMILIES (F_ID NUMBER(3), F_XML XMLTYPE);
insert into families values(1,xmltype('<XML.....>'));
or
insert into families values(1,''<XML>......' ));
Hope this helps !!!
Regards
Faiz

Double posting of APC value in non leading ledger

Hi,
While posting asset, system is posting to both Leading and non leading ledger where as configuration is allowed to post only leading ledger in realtime and periodic posting is allowed in non leading ledger. That cause double posting in non leading ledger on execution of ASKB. Please guide.
Regards,
DC

ASKB is working based on this table "APERB_PROT". So if I remove these entries, no posting will be allowed through ASKB which is possible if I simply not execute ASKB. Here what I am looking for that on posting of original value should only post to leading ledger and with ASKB it should post in non leading ledger because of its configuration.

MIRO. Add double posting when system posts Cost differences ( PRD trx )

Hi gurus.
I think this question is very difficult.
My user wants to add double posting when the system posts costs differences.
With this example I think the question will be more clear.
Example:
Actual financial document of invoice with costs differences ( PRD ):
103644 ( vendor )   -30.000 u20AC
400900                     47.000 u20AC
610020                    -13.000 u20AC    ( Cost differences account )
In this case, my user wants to add this:
103644 ( vendor )   -30.000 u20AC
400900                     47.000 u20AC
610020                    -13.000 u20AC    ( Cost differences account )
300190                      13.000u20AC
300080                    -13.000u20AC
There are any OBYC transacition to do this?? or there are any add-in or user-exit to add accounts in MIRO trx??
Thanks.

Pls clarify on the process and what are these other G/Ls you are mentioning.
But apart from that if you want any random accounts to be hit depending on the document in question at the time of invoice, than you may activate manual entry into G/Ls in MIRO and than manually give the 2 accounts with debit/credit entries and it should work fine.
Regards,
Dakshesh

Help needed, double post-submit on Oracle 9iAS ?

Hi,
I am working on a project where we make use of Oracle Application Server 9.0.3 in combination with OC4J and struts. During development we have made use of JDeveloper 9.0.3 and its integrated server for testing the application. Unfortunately we have been waiting too long with deploying the app on the 'real' (Oracle IAS) server, and now we found out that when deploying the application on IAS, some parts of our application do not seem to work anymore.
After a little investigation we found out that all POST submits of our forms seem to be submitted twice.
Since we did some Javascript-evaluation before submitting, we first thought that that the problem was client-side, but after adding code to make sure that the submit will only occur once (flag set to 1 before submit, and only submit when flag = 0 etc..), the problem still persists...so the submit does not come from our document.formx.submit() command...
Let me restate that this double posting does not occur within the JDeveloper-test-environment using the same browser.
Now convinced that the problem was server-side, we thought we could focus on this side. Unfortunately, after an occasional test with a Mozilla-browser (our default (customer) browser is IE6), the problem did NOT occur !
So, to sum things up :
- Javascript does not submit twice
- On the server, the logging indicates a double post-action
- On client-side, only a single-post is allowed...
- mozilla does not seem to cause problems, while IE6 does.
- JDeveloper runtime environment does not expose the problem (with either browser, it goes smooth), while deploying on the IAS 9.0.3 server does...
Can anyone shed some light on this ? We've been looking into it for a day already, and need to get it fixed asap (as always ;o))...
Thanks for any info,
Bas van Driel

This sounds like a strange java problem not IAS
From the sun site
"When I try to open a file through my Java Web Start application, a message box pops up with the title "javaw.exe - No Disk". Why does this happen?
This is a bug in the Java 2 SDK v1.2.2 or v1.3 . This bug will be fixed in a future Java 2 SDK release. In the meantime, there are a couple workarounds: "
Id be very tempted to remove any JDK/JRE installations, or even better start with a clean machine.
Hope this helps.

Double Posts/Triple Posts?

On other forums, performing a double post is a no-no. A triple post is unheard of. But here I've seen my first 7 posts in row.
http://forums.ni.com/t5/LabVIEW/Bit-coin-mining-with-FPGA-Single-board-reo/m-p/2475006#M757254
What is the longest you've seen? Do I hear 9? or 10?
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

altenbach wrote:
Some other forums do e.g. a MD5 hash of all recent posts, and if the hash of a new posts matches the hash of a recent existing posts, the post is rejected.
This will at least eliminate the duplicate posts due to forum malfunction.
Okay this I understand and it has happened to me a few times, but what I was more talking about is when someone posts a question, then replies with a semi-related question, and then an update to the first issue, then a third issue, then an update to the first issue, then a post about a forth issue. One of the more difficult things to do in a thread is talk about multiple subjects, or update a particular subject when there are many updates to it that are all one sided conversations.
I feel like after posting you need to give the community time to digest the post before posting again. This is another reason why I hate "Bump" posts just so your topic gets more exposure. It's like nagging someone to call you back. You left a message once, then twice, leaving 4 other messages telling them to call you back isn't going to make it happen any sooner. But I do see these "Bump" posts actually working so I guess that's why people do it.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Curve 9300 problem ..... Please Help ! (SORRY FOR DOUBLE POST)

SORRY FOR DOUBLE POST GUYS, it bugged and I don't know how to delete it ! I don't want to get an infraction :/ ..
Hey Guys ! First of all, I'm new to the community and looking forward to be as active as possible to help people and get help from professionals ! (And sorry for my bad english tho :/..)
So here's the problem ...... I bought a blackbery Curve 9300 today, and what happens, is when I try to update it, it gave me at first, error 507 (Which means there's no OS in the device I suppose) ... when I tried to update it again, it gets stuck on ''Reconnecting to JVN'' or ''JVM'' can't remember ..... ive been trying to find a solution for hours and stil no luck .... i tried pulling the battery out and putting it back in, but doesnt work ..... a pop up message told me to go to control panel, check for USB Root hub and put a check mark on a certain option, but they were already checked ..... this situation is extremely frustrating because the guy from whom i bought the phone doesn't answer anymore, and I don't really want to take it to a store to repair it for like 60-80 $ or whatever ..... if possible, I'd like to get some help please !!!
Thank-You in advance guys !

Hi 12khaled21,
Welcome to the community.
Error code 507 comes when there is no OS installed in your device.
Try downloading appropriate OS and install it.
Check this link KB10144 and reply back.
Raj
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Double post *DELETE

Accidental double post, *DELETE

Hi Björn!
As a Level 3 member of  Discussions, you have the same ability, to request that a Host delete, or edit any post,
In every entry, in the lower right corner, there is a link/tab to Report this post.
Click on that, and enter a brief explanation, then click on Submit.
ali b

[fail] double post

sry double post
Edited by: Damien on Sep 18, 2011 11:42 AM

I failed to mention in the previous reply that I was able to get my system running again with the ddr2 memory however it is not easy.....
1)All connections removed from MB
2)place a single stick of ddr2 in slot 4 with turbo cards (manual says slot one but this does not work)
Doing step 1 and 2 results in a start up with a stop a few seconds later and another start but no boot into bios.
3) Now I remove ddr2 and turbo cards, put in a single stick of ddr3 in slot 5, run a power cycle
4) replace the turbo cards and ddr2 in slot 4
5) if bios still does not load then I try removing graphic card and running a power cycle and then replacing graphics card.
By the end of step 5 seems I finally get two posts that shut down and then a third post which boots into bios.

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Text Box double post

Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Windows 7 Ultimate 64 bit on HP Touchsmart IQ527 Desktop PC, original OS Vista Home Premium x64, upgraded.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Windows 7 Ultimate 64 bit on HP Touchsmart IQ527 Desktop PC, original OS Vista Home Premium x64, upgraded.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Hello,
         I've been posting on this forum for a while.
The problem is, it double posts. If you look at some of my previous posts, the text is inputted 2, maybe 4 times.
I performed a system recovery and installed my programs - Firefox 4 Beta 7, Windows Live, AIM, Fedex Desktop, Camtasia Studio 7, 7-zip, System Mechanic, Hulu desktop, Maplestory.
When I installed all these, i tried posting after each installation, and there was no problem. It started this morning, and I don't know what to do. Keyboard battery is full.
Windows 7 Ultimate 64 bit on HP Touchsmart IQ527 Desktop PC, original OS Vista Home Premium x64, upgraded.
EDIT: And if you're thinking that I copied and pasted, I can make a video to prove it.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!
This question was solved.
View Solution.

Firefox's beta browser and IE9 have caused this issue before for others. Use a stable browser release and your issue will disappear.
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

RequestDispatcher.include (Sorry for double-post)

My apologies for the double-post, but the original subject was badly named.
My goal is to process a JSP as an include, within a portlet, but not render it as part of the portlet page.
With Tomcat and Struts I can perform an include and easily view the HTML that was generated via my HttpServletResponseWrapper. Here is some sample code:
RequestDispatcher dispatcher = request.getRequestDispatcher("/portlets/test/test.jsp");
if (dispatcher != null) {
StringWrapper wrapper = new StringWrapper(response);
dispatcher.include(request, wrapper);
response.setContentType("text/html; charset=UTF-8");
response.setHeader("Content-disposition", "attachment;filename=include.html");
response.setHeader("Cache-Control,", "no-cache");
PrintWriter pw = wrapper.getWriter();
pw.write(wrapper.toString());
pw.close();
I'm calling this from a Struts DispatchAction that was initiated by a pageflow action so I do not have to return a forward. This has worked perfectly in the Tomcat environment and I'm trying to figure out a clean way to do the same under Weblogic.
If Weblogic insists on rendering the entire response, I can deal with that, provided I have some way to get at and modify the HTML prior to leaving the DispatchAction method.
Any ideas?
Thanks.

Your use case is not very clear to me -
a. What do you mean by "but not render it as part of the portlet page"?
Are you trying to render this with out the portal aggregating it? If so,
you should use a redirect.
b. Secondly, your sample code below may not work correctly (even in
Tomcat). You are setting content-type, content-disposition etc after
doing an include. You should be doing before, so that the headers will
get written to it.
My guess is that you are trying to provide a download link. The easiest
way to accomplish this is to do it outside a portlet (like a stand-alone
struts action), and just create a link to that from your portlet.
HTH.
Subbu
Christopher DeBracy wrote:
My apologies for the double-post, but the original subject was badly named.
My goal is to process a JSP as an include, within a portlet, but not render it as part of the portlet page.
With Tomcat and Struts I can perform an include and easily view the HTML that was generated via my HttpServletResponseWrapper. Here is some sample code:
RequestDispatcher dispatcher = request.getRequestDispatcher("/portlets/test/test.jsp");
if (dispatcher != null) {
StringWrapper wrapper = new StringWrapper(response);
dispatcher.include(request, wrapper);
response.setContentType("text/html; charset=UTF-8");
response.setHeader("Content-disposition", "attachment;filename=include.html");
response.setHeader("Cache-Control,", "no-cache");
PrintWriter pw = wrapper.getWriter();
pw.write(wrapper.toString());
pw.close();
I'm calling this from a Struts DispatchAction that was initiated by a pageflow action so I do not have to return a forward. This has worked perfectly in the Tomcat environment and I'm trying to figure out a clean way to do the same under Weblogic.
If Weblogic insists on rendering the entire response, I can deal with that, provided I have some way to get at and modify the HTML prior to leaving the DispatchAction method.
Any ideas?
Thanks.

Double Post --Discard this

Similar Messages

Maybe you are looking for