Double Preset and other aspects of LR?

How do you apply double or more presets to the same picture and know that you're doing so? becouse sometimes I just wanna aplly different presets individualy to an image to see how its gonna look like for each one without apllying all of them. Also for some reason when I aplly preset ,modyfy it a bit .export it and overwrite the original file, the image in the lightroom gets double tretment of that particular preset , so i have to click on import tab(the one next to history) for it to become like i originaly exported. why is this??

The History panel in Develop is invaluable for seeing the effects of any pre-sets.
LR never overwrites a file; but it will leave the state of how the image is viewed where you last left it. Again, check History; you can click on any state up or down the list.

Similar Messages

Where can i find configuration and other aspects of SAP learining solution

where can i find configuration and other aspects of SAP learining solution
Ross

Plz go through below URLs:
[http://saphrexpert.blogspot.com/2009/01/lso-configuration.html]
[http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/69/415a2b9208485380091d5e3c659c26/content.htm]
Mohan

White balance presets and other random questions

Hi,
I'm new to aperture and I had a few questions:
1) Is there a white balance preset, i.e. daylight, shade etc, or do you manually have to dial these numbers in each time?
2) Is there another color meter aside from the loupe? Something that I can leave on the same spot in the image while I'm trying to correct color?
3) I have roughly 5000 nef images on a second hard drive on my G5, is there a way to keep the library external (like Lightroom), or do I have to reimport all of these images in to aperture's library?
4) Where does the image library like to live – where will it be fastest? Should it be on the startup drive, or is there a speed advantage to putting it on a secondary drive (like photoshop)?
Cheers,
G5 Dual 2.0g Mac OS X (10.4.3) macbook pro 2.0g

Hi Ned(bot?),
1) Unfortunately, no. You have to dial these in each time. If you dial it in for one image you can lift and stamp to others, but it's a bit hit or miss.
2) The color meter is always active -- check near the histogram, it shows the RGB and L values for each pixel... this has been since 1.1.
3) You must import the images into Aperture's library. Note Aperture can have multiple libraries... the only thing is to switch between them you need to make a preference change and re-launch Aperture. For the photos to be accessible from other applications, while inside Aperture's library, you can either make a smart folder which exposes them from the Finder, or you can use a tool like iView Media Pro which can peer inside Aperture's library (which is really just a folder).
4) On a desktop machine, the library will be fastest on the internal drive. On a laptop -- it depends... A Firewire 800 connection to a 7200 RPM disk will be faster than an internal 4200 or 5400 RPM drive... a Firewire 400 connection may be slower. Does your MBP have a 5400 or 7200 RPM internal drive? The latter is better, but the difference won't be colossal.

2,35:1 and other aspect ratios ?

Are we limited on 16:9 aspect ratio with FCPX ?
Thanks

You are limited to editing in standard video and film formats. The film formats that are 2k and 4k do not have to be 16:9. You can see this in the custom project properties.

Bridge quits responding while browsing AfterEffects CC type presets and others like backgrounds and the such. Why?

I have trashed my preferences upon startup and purged all my cache.
The problem is still here.....at a loss!

Thanks, now I understand why the wifi keeps dropping. On my personal wireless network, it also seems the distance from the access point is not good compared to my laptop. At work our network & exchange teams don't seem to have the desire to struggle with this "toy" until customers start forcing its adoption. I am using OWA and it works fine over EDGE. I will share your posting with them.
Thank you again.
Dell Windows XP Pro

Lost Presets and Customizations

I've recently lost my presets and customization, such as my custim Metadata preset and my Import preset. Is there any way to get them back withour recreating them?
I am now using LR 3.5 on a Windows 7 machine.
Thanks

Barry,
That depends on how you managed to lose them.
Here is a website that tells where to find presets and other customizations on various operating systems. If your old data wasn't overwritten in the upgrade to Win 7, it will help you.
Hal

Double clicking or clicking anywhere in Safari opens new tab with Mackeeper and other unknown websites.

The solution provided in the other discussions are not working for me. The 'vsearch' solution given in other discussions doesnt work.
I dont know what I have downloaded but now whenever I type anything in safari or click or double click then a new tab opens with mackeeper link and other unknown websites.
Thanks in Advance.

You may have some other adware besides Downlite (aka VSearch). In addition, you may have a newer variant of Downlite, which is using a variety of new names after having the last two variants blocked by the anti-malware feature built into Mac OS X.
Your profile indicates you are running Mac OS X 10.6.7, in which case you will not be able to use dominic23's suggestion (AdwareMedic requires 10.7 or later). Apple's support document on removing adware may help, but you'll find a more complete list of adware in my Adware Removal Guide.
You may also have a variant of Downlite that is not described in any of these documents and that is not yet recognized by AdwareMedic. I believe that there is a new variant that uses a variety of different names based on unknown criteria, either defined by different installers or determined at install time by some characteristic of the machine that it is installed on. Look in the following folders:
/Library/LaunchAgents
/Library/LaunchDaemons
If you find a file named "com.xxx.agent.plist" (where the "xxx" part can be anything) in the first folder and files named "com.xxx.daemon.plist" and "com.xxx.helper.plist" in the second, please report back here for further advice.

LR 5.5 double-click behavior on WB sliders (and other sliders in Basic tab)

i recently upgraded to LR 5.5 from 5.4.
sometimes i check the auto-WB recommendation by using the ability to Shift + double-click on a WB slider (in Dev. Module). (this feature was introduced in LR 5, i believe, maybe LR 4.)
before the upgrade, whether the WB sliders were already at a custom setting or still on the "as-shot" setting, you could Shift + double-click on either the Temp or Tint slider and get the "auto" recommendation. Then, you could undo and redo, toggling back and forth between the auto setting and whatever you had before that.
now, however, when i Shift + double-click, before the slider registers the double-click and produces the auto setting, it responds to the first part of the double-click. that means that FIRST it moves the slider a little one way or the other, and THEN goes to the auto setting.
this behavior makes it impossible to toggle back and forth between the auto setting and whatever it was before that. instead, it now toggles between auto and that little adjustment that was registered in the first part of the double-click.
for example:
the Temp slider is set to a custom value of 5200 on a certain photo.
i'm curious what is the auto recommendation, so i Shift + double-click on the slider.
the slider registers the first part of my double-click, moving for an instant to 5384, before understanding that i actually double-clicked and producing the auto setting.
this is annoying in any case, but it's a problem because now when i undo and redo to toggle between my custom setting (5200) and the auto recommendation, it's instead toggling between the auto and 5384. (or whatever value happened to register in the first part of the double-click.)
this changed behavior also affects the other sliders in the Basic tab where you can Shift + double-click to check an auto value. personally, i never use this feature on the other sliders, but i do use it quite a bit on the WB sliders as a step in arriving at my custom WB.
also, i just noticed that it also happens sometimes on black-and-white images, when adjusting the Black and White Mix sliders. (these sliders can also revert to their auto value if you adjust one and then Shift + double-click. this is beneficial for when you don't want to return the whole group of sliders to auto mix.
note:
i do not adjust the sliders by dragging. instead, i mouse over a slider, and use up or down arrow keys to adjust in regular increments (or Shift + arrow key for a larger increment). i find this is a much better way to work for a number of reasons, and especially with large numbers of images. if i want to make a finer adjustment, i just click in the value field of a slider and use arrow keys to go in single-unit increments. (or use Option + arrow key for a smaller-than-default increment.)
For color Temp, camera settings already use 50-degree increments (5600, 5650, 5700, etc.), so they appear in LR with those kinds of rounded numbers, never 5611 or whatever. using the arrow keys to adjust color temp also goes in 50-degree increments, and using Shift+arrow key goes in 200-degree increments. For Tint, however, the camera does use single-unit increments, like 7 or 11. the arrow key method of adjusting Tint goes in increments of 5 or 20, which for Tint is usually too broad of an adjustment.
sorry for the long post. anyone else having this problem? as someone who does a lot of toggling back-and-forth to compare things, i find this fairly small change in behavior incredibly disruptive.
my system:
late 2013, 15-inch rMBP; 2.3 GHz i7; 500gb SSD; 16gb RAM
OS 10.9.2 (not yet on 10.9.3 as there seem to be problems)
no Adobe CC items.

bob,
you are correct—what you said does work.
{for the sake of clarity and consistency, when i say double-click on the "slider", i mean on the value-marker, the triangular point that actually moves (or what ssprengel is calling the "slider-thumb/handle" if i'm understanding him correctly)—not the range on which it moves, nor the label to the left side of the range.}
but have i gone crazy?? has the behavior not changed at all?? i could have sworn that in the past, i was double-clicking (with or w/o shift key) on the value-marker of the slider, instead of on the label as you mention (although that instruction does sound familiar now, too). this is not a rare action for me, but something i've done countless times on the WB sliders, and also on the Black and White Mix sliders to return them to their auto value.
actually—now that i think about it, i do this action a ton on the HSL sliders, also: use the arrow keys (or Shift+arrow) to adjust HSL values, which go in increments of 5 (arrow) or 20 (shift+arrow). sometimes to return to zero i use the arrow keys again, but sometimes just double-click on the slider.
Or, if i want to see a very large, imprecise adjustment, i don't use the arrow keys but just click once towards the extemes of the range: +83 or -100 or whatever. and then to return to zero, i just double-click on that same spot—meaning on the slider/value-marker, wherever it happened to land on my first click.
however, in the last couple major releases (LR4 and now LR5), i've noticed that feature doesn't work quite as well as it used to. it used to be very easy to click once, get an extreme value, then very soon afterwards double-click and return to zero. you could do it easily, without even looking carefully at the sliders (so you could look instead at the picture changing). now, however, i find that i usually have to double-click two or three times before the slider responds and goes back to zero. sometimes i have to reposition the mouse very slightly and double-click again for that action to happen (and not because my mouse strayed from the slider).
i have noticed this to be true across many changing conditions:
major releases and smaller updates of LR;
different OS (10.6.8 snow leopard through 10.7, 10.8, and 10.9 mavericks);
different machines: 2007 MBP and late 2013 rMBP;
even different mice: used to have an old Kensington mouse; now using Logitech G500s, a fairly high-end gaming mouse (even though i don't do any gaming).
when i first noticed this less-responsive behavior, i thought it was due to my mouse and/or computer being old, maybe outdated. the kensington mouseworks software didn't really work, even on the older 2007 MBP. so i chalked it up to mouse issues. but it's exactly the same with my new, much more sophisticated mouse, whose software does work on my late 2013 rMBP.
(and now, with LR5.5, there's the issue i mentioned originally, where the first part of the double-click records a value shift before LR realizes i was actually double-clicking.)
why am i bothering to say all this??
first, it's an additional problem, but similar to what i originally posted about. second, it offers (at least some) support for my original idea—that in the past, i was, in fact, double-clicking on the slider itself, not on the label, to get auto or as-shot values.
does anyone else have any thoughts on this? am i the only one who "remembers" double-clicking on the slider, not the label, to get the auto or as-shot WB, or reset HSL sliders, or return to auto values of individual sliders in Black and White Mix?

What are the best sequence presets and settings to use in FCE for the best resolution with the least amount on strain on computer?

Hello!
Can someone please help me figure out the best settings to use in order to obtain the best resolution in FCE4 for a television show that is going to be sent out on full size Sony DVcam tapes, with 4:3 aspect ration and audio output at 48kHz? I am currently working with mixed media sources in Final Cut Express, and I am wondering what the best settings (presets and preferences) are, in order to provide the HIGHEST resolution possible, while putting the least amount of strain on my computer system?
I am importing mini DV-standard definition footage and still photos (from Canon Rebel camera, HD CMOS Canon camcorder that records in 1440x1080 at 48 kHz, and cell phone photos). For voiceovers I use the tools in FCE.
I use Voltaic (which I use thanks to recommendations from Apple discussion boards, love it!) to convert the footage from the HD CMOS-Canon HD VIXIA (HG 20) camera, and then I am using print to video to output onto Sony DVcam tapes (full size). This is for delivery for a television network that broadcasts in Standard Definition, so I need to produce the highest resolution and best quality possible that also puts the least amount of stress on my computer system.
If anyone has any recommendations, help, or sources that can help me answer this question I would be greatly appreciative.
Thank you!
Susan Kayne

This is happening because your video clip properties do not match your sequence settings. This is always a problem when you try to insert video from multiple camcorders/cameras (that use different video codecs, frame sizes & rates) in a single sequence.
It will help a lot if you provide more specifics - what FCE easy setup did you use to create your sequence? For your DV footage, are you using standard 4:3 DV or anamorphic 16:9 DV clips?
If you plan to export to standard def (DV/DVCAM) and are mixing DV from a miniDV camcorder, stills, cell phone images and AVCHD then I would suggest that you use the DV NTSC easy setup for your sequence. Use MPEG Streamclip or similar utility to convert your non-DV video (your AVCHD video) to QuickTime/Apple DV-DVCPRO NTSC. Then all your video will match your sequence settings. Yes, you will have to crop the AVCHD footage to 4:3 and you can do that in MPEG Streamclip.

NEW SOLUTION TO UR MISSING CONTENT OF LOGIC STUDIOS EXS24 and others...

hi folks...you're be suprise i've dunn possibly EVERYthing to ressurect the missing contents of EXS24 and other sounds thats has been gone due to installation of Logic Studio...Now for those who transfer there LP7 to the LS8 songs sumtym get no strings and blah blah blah...to limit this down for you...
heres wat to do...
go on to garageband...
create new song and click the plus button to add a new software instrument and you'll get a panel on the rightside of the GB screen with ur desired instruments you'd like to use for to create music...now go on to strings...and you'll see the highlighted outcasted string such as hollywood string and others...double click on it and it'll ask to install GB componant/jam packs and click accept and follow instructions...as its all done and dusted you got all ur preset sounds on ur new logic and everything that wasn't working from LP7 to LS8 is now sorted...and works fully like LP7...lol
and i half expected that it wudn't work i'm now literally over the moon i can continue doing my mixtape...:D

wt i wasn't clear enough is to make sure you have garageband '08 and not garageband 3 or oldies...i figure dthis out wen i did the same on my macbook coz i originally done this on my imac...and figured out the software versions wer different in order to get these missing components...make sure you have Garageband '08 in order to get the missing samplers on ur logic..i've hoped i've helped you out...:) enjoy.

Ps CS6 problem: Missing abilities of Layer Style presets and Groups

Ps CS6 v13.0.1
OS X 10.6.8
Layer Style presets seem not to function with Groups.
Unable to apply LS preset to Group.
(Able to apply LS preset to art layer.)
Unable to create LS preset from LS of Group.
(Able to create LS preset from LS of art layer.)
(Able to copy/paste LS from/to Group and art layer.
Able to drag Effects from/to Group and art layer.)

I tried to confirm what you've written and couldn't, using Photoshop CS6 13.0.1 x64 on Windows 7 x64.
I grouped a couple of text layers
I double-clicked the group to bring up the Layer Style dialog.
I clicked in the Styles box at the upper-left.
I chose my Gold Metal preset and was surprised to see it work.
I added a shape to the layer group and tried a different preset, and that worked too...
Perhaps you're going to have to be a bit more specific about what you're doing. As with most things nowadays, Photoshop doesn't seem to be broken in a simple way.
-Noel

Missing HDV 1080p24 preset and what version of CS3 is latest?

1) I'm missing the HDV 1080p24 and HDV 720p24 presets... From this message a year ago, Jan of 2008, it looks like they were to be included in version 3.1.2.
=======================
Wil Renczes - 1:58am Jan 30, 08 PST (#54 of 82)
Honestly, I'm not sure why the presets were left out. I suspect it was out of sheer neglect - the 24p presets were created after CS2 shipped, and they were never passed over to engineering to be added back to the depot.
In any case, yes, we're planning on adding them back. In fact, I added specifically both a 1080p24 & a 720p24 preset to the upcoming 3.1.2 updater last week.
==============================================
2) I have version 3.1.1 of PPro CS3 (As part of the CS3 production Premium Suite). When I hit Help, Update it says no update is available...
What is the latest version? And if it's not 3.1.1, how do I get it?
Thanks.

Hi Rory,
I must say I'm not familiar with the settings and specs of CS3, especcially not with which (updated) versions include which presets and so on.
But I had a familliar problem using CS4, so it may help you:
- Double check these:          * You are using the trial version? Maybe trial doesn't support these presets.
                                          * Your full version somehow ended up being trial again? SN not activated anymore... could be.
                                          * In case you're using Windows: Do you (still) have Windows Service Pack 3 installed. My problem was that
                                             I was working with SP 1 , which caused my CS4 to fail showing the HDV preset (as wel as some others like XDCAM, ...)
Double check the above, they may solve your trouble.
Jef

Convert smart quotes and other high ascii characters to HTML

I'd like to set up Dreamweaver CS4 Mac to automatically convert smart quotes and other high ASCII characters (m-dashes, accent marks, etc.) pasted from MS Word into HTML code. Dreamweaver 8 used to do this by default, but I can't find a way to set up a similar auto-conversion in CS 4. Is this possible? If not, it really should be a preference option. I code a lot of HTML emails and it is very time consuming to convert every curly quote and dash.
Thanks,
Robert
Digital Arts

I too am having a related problem with Dreamweaver CS5 (running under Windows XP), having just upgraded from CS4 (which works fine for me) this week.
In my case, I like to convert to typographic quotes etc. in my text editor, where I can use macros I've written to speed the conversion process. So my preferred method is to key in typographic letters & symbols by hand (using ALT + ASCII key codes typed in on the numeric keypad) in my text editor, and then I copy and paste my *plain* ASCII text (no formatting other than line feeds & carriage returns) into DW's DESIGN view. DW displays my high-ASCII characters just fine in DESIGN view, and writes the proper HTML code for the character into the source code (which is where I mostly work in DW).
I've been doing it this way for years (first with GoLive, and then with DW CS4) and never encountered any problems until this week, when I upgraded to DW CS5.
But the problem I'm having may be somewhat different than what others have complained of here.
In my case, some high-ASCII (above 128) characters convert to HTML just fine, while others do not.
E.g., en and em dashes in my cut-and-paste text show as such in DESIGN mode, and the right entries
    –
    —
turn up in the source code. Same is true for the ampersand
    &
and the copyright symbol
    ©
and for such foreign letters as the e with acute accent (ALT+0233)
    é
What does NOT display or code correctly are the typographic quotes. E.g., when I paste in (or special paste; it doesn't seem to make any difference which I use for this) text with typographic double quotes (ALT+0147 for open quote mark and ALT+0148 for close quote mark), which should appear in source code as
    “[...]”
DW strips out the ASCII encoding, displaying the inch marks in DESIGN mode, and putting this
    "[...]"
in my source code.
The typographic apostrophe (ALT+0146) is treated differently still. The text I copy & paste into DW should appear as
    [...]’[...]
in the source code, but instead I get the foot mark (both in DESIGN and CODE views):
I've tried adjusting the various DW settings for "encoding"
    MODIFY > PAGE PROPERTIES > TITLE/ENCODING > Encoding:
and for fonts
    EDIT > PREFERENCES > FONTS
but switching from "Unicode (UTF-8)" to "Western European" hasn't solved the problem (probably because in my case many of the higher ASCII characters convert just fine). So I don't think it's the encoding scheme I use that's the problem.
Whatever the problem is, it's caused me enough headaches and time lost troubleshooting that I'm planning to revert to CS4 as soon as I post this.
Deborah

Merge to HDR Pro from LR5. After applying preset and during conversion of file, Iget an error message "Adobe Photoshop CC 2014 has stopped working" and closing PS

In LR5 i do: Merge to HDR Pro. After I apply my preset and PS attempts to convert HDR file, I get an error message from PS: "Adobe Photoshop CC 2014 has stopped working". Then PS Closes.
My source files are 5 NEF files of 28 MB. I select 16-bit, I also tried 8-bit. No difference. Same error message.
I have a Toshiba Quosmio X870 with Intel i7 3610QM @ 2,30 GHz, 16 GB RAM, Windows 7x64 HP SP 1, 7,3 Performance Index
Any suggestions?

As the crash report says - your outdated video card driver is crashing. You need to update your video card driver from the GPU maker's website (AMD/ATI in this case).

Why did my index.htm file generate blank? and other weirdness.

Here's the story. Maybe someone can tell me where I made my mistake, or what happened. I'm numbering the steps for convenience in discussing this.
1) I started a new project, a WebHelp project.
2) I imported content in Word.
3) I created an index, glossary, and TOC. I used wizards for some of this.
4) I created a style sheet and applied it to all the topics.
5) I added a skin from the gallery.
6) I generated output.
Then I sent that output to the UI developer on my project. He plugged it in to the web app, and it seemed to work fine. So then:
7) I opened the project, edited the text, and removed glossary links (because I didn't like how they were working) individually.
8) I generated a new TOC to match the changed topic structure (minor changes).
9) I generated another output.
I sent that output to the UI developer and he said it was blank. I opened index.htm and sure enough, it was indeed blank. In fact, it was Zero KB. I also noticed that four other files were blank: whfform.htm, whform.js, whskin_plist.htm, and whtbar.js.
So then I decided to start over. I created a new project, imported just the html topic files from the old project, redid the index (in a hasty and less thorough manner), decided to bail on the glossary for now, did a TOC and sent that to the developer.
Now the Search pane is totally wonky, showing a list of characters and terms.
So I am getting frustrated. The developer has tried monkeying around with stuff on his end, but it's not working. So he says, why don't you send me a build with everything?
The problem is, I have two broken builds. The first one, which for whatever reason has the blank index.htm file (and other blank files), and the second one, which has no glossary, a messy index, and a screwed up search.
I can't seem to find anyone else having this problem. :-/ Can someone help?
Thanks so much,
Tamarleigh

I am having the exact same problem, and I think I've figured out what is happening here. There is an issue when mapping Word styles into RH. The person who setup our Word template included a sidehead with conditional text to hide instructor notes when printing participant training manuals. I removed the conditional text, and everything is working fine. You may want to double check to make sure you don't have conditional text in your Word docs. I've uploaded an image with the code below to show how the conditional text looked when the document was linked and generated.
Check out the code below:
<table cellspacing="0">
          <tr>
                    <td style="vertical-align: top; padding-left: 0px; padding-top: 0px;
                               padding-right: 0px; padding-bottom: 0px;" height="800" width="114"><table
                               cellspacing="0" width="100%">
                              <tr>
                                        <td style="padding-left: 0px; padding-top: 0px; padding-right: 0px;
                                                   padding-bottom: 0px;"><div v:shape="Text_x0020_Box_x0020_146"
                                                                                                                         class="shape" style="padding: 3.6pt 7.2pt 3.6pt 7.2pt;">
                                                  <p class="WD_InstructorNotesHeading"><span style="background: #ffff00;">Instructor
                                                   Notes:</span></p>
                                                  <p class="WD_InstructorNotesText"><span style="background: #ffff00;">Add
                                                   any additional instructor information into this text
                                                   box.  It will only appear when hidden text
                                                   is turned on.</span></p>
                                                  <p class="WD_InstructorNotesText"> </p>
                                        </div></td>
                              </tr>
                    </table>
                     </td>
          </tr>
</table>
Cheers.

Double Preset and other aspects of LR?

Similar Messages

Maybe you are looking for