Double Sided Printing through ePrint

Hi,
Tried searching the forum and this topic crops up a couple of times without any replies. Hence I'm assuming there's no way to set the default for documents sent via ePrint to be printed duplex (saving lots of paper). Any plans for an update to ePrint/printers that support ePrint to give users this option?
Thanks.

Hoping that someone from HP will actually take a look at these posts and give us an answer...other than 'its being pondered'. the main reason I purchased this computer was to be able to print forms from my work to my home printer instead of having to drive 30 miles to the office (goverment computer wont let me hookup to my home network) SO the eprint defeated that, BUT I CANT PRINT DUPLEX!!!! The box and HP rep who were at Best Buy and talked me into buying an HP again (after years of refusing to play HP games again) said it was 'auto duplex'. Who would have ever thought that part of its printing would be excluded from that. Cmon HP, dont wait for CANON to outdo you again

Similar Messages

How do you do double sided printing with eprinting with a hp officejet pro 8500a premium?

How do I do double sided printing with eprint? Why is there no option to change it online? I have
HP Officejet Pro 8500A Premium

Hi,
Automatic Two-Sided printing is not currently supported by the ePrint Service, as you may find any of the service capabilities and limitations listed below:
Duplexing (printing on both sides of the page) is not supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en&product=4083971&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Two sided printing using eprint

how can make eprint use the double sided feature of my c310a?

Hey maxntulsa,
Currently there is no option to use double sided printing through ePrint. There may be an option for this in the future but right now it is not possible.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

How do I enable double sided printing on my iPad through the HP ePrint app?

HP Laser jet 1102w
I have Windows 7 64 bit and a original iPad.
I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

Hi,
Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Double Sided Printing on Envy100 D410c

Is there any way to set double sided printing as the default so that long pdf files sent through e-print will be printed double sided, saving a ton of paper?

Unfortunately ePrint does not support double sided printing. You could try printing using iPrint or Airprint to get double sided printing.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Need help with doing double sided printing!!!

i have a Epson XP-100 priniter and also MacBook pro laptop
i am having serious trouble with doing double side printing
can somebody assist me through please
thanks

Read the user manual that came w/the printer. It will tell you if double sided printing is compatible w/your current OS which you did not mention. If not, you will need to contact Epson tech support and/or post in their forums if they have one.

Deskjet 930c does not do double sided printing with windows 7

We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
It does go through the motion of double sided printing but does not stop to change the paper.
Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

Please look at the HP Support page,
http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00098827&lc=ja&dlc=ja&cc=jp
Unfortunately, I could not find an equivalent page in English. This is for Win XP and Vista, but I checked
that a similar logic can be applied to Windows 7, too.
step 1 to 3 is to show property of the printer Deskjet9xxC.
step 4 is to select device setting tab
step 5: change "installable option" from "uninstalled" to "already installed"
step 6: OK
step 7: select print setting
step 8: select layout tab, and choose either long edge or short edge
that is all.
In my Japanese Windows 7 environment, when I double-click the "HP DeskJet 930C/932C/935C" icon, there are three sub items appeared. Two out of these three were used in the above steps.
Please try.
PaperlessUK wrote:
We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
It does go through the motion of double sided printing but does not stop to change the paper.
Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

Double sided printing for canon

how to print double sided printing for canon mp287?

I am having the same problem. I just got a cannon MG2520 and I've been trying to print double sided...however it's not a grayed out option. This is extremely infuriating because I need to print about 50 slides off every few days for class. I've tried everything people have offered so far. There is no "duplex managing" or something to that effect when I go through systems and preferences. I read somewhere else to change format for to the specific printer and use "letter" instead of "US letter." However, US letter isn't even an option for me. I tried to go through preview and it just kept making the slides go the wrong way and wouldn't let me print multiple slides to one pages. As of now I have to manually go through, hit handouts (6 slides per page) and then count what number slides those are in order to print it right....this is extremely frustrating!! Any other suggestions would be greatly appreciated!

How to show the layout option for double-sided printing on Acrobat Pro X on Mac?

Adobe Acrobat Pro X version 10.0.0 print dialog does not show the option to select Layout for two-sided (double-sided) printing. How to fix it?
System: Mac OS X 10.6.6 on Mactel
Thanks.

David,
Wow, it worked. Many thanks. This is what I did, following your directions to print PDF files as double-sided:
01-Command P & Click "Printer button".
02-Click Yes.
03-Click the Popup Arrow to display contents.
04-Select Two-sided "Long-Edge binding" or whatever needed and Click Print.
05-Click OK to Print.
What fooled me is that from Word (.doc) files the screen on step 3 and 4 show directly selecting a popup menu on the initial print window, whereas when printing PDF files it is required to go through steps 1-2-3 above.
Again, many thanks. You made my day!!!

How do I use the double sided printing with my HP Officejet 6500A plus

I need help with learning to use the double sided printing with my HP Officejet 6500A Plus

Click on the Show Details button just above:
You can configure various options from the dropdown menu just below Orientation.
Printing two-sided requires a two-sided adaptor for the printer. Otherwise, you have to print out odd numbered pages first, turn them over and reinsert into the paper feeder, then print even numbered pages. If you do it right you get a nice two-sided document. If you do it wrong all the even numbered pages will be upside down.

How can I permanently disable double sided printing in Acrobat Reader 11.0.09?

It is annoying to have to manually turn off double sided printing every time I print a *.pdf. Is this fixable?

Hi prtlaw,
Are you still look for answer?
These option are available with printer drivers. So, this is something you need to check from printer http://windows.microsoft.com/en-in/windows/choosing-print-options#1TC=windows-7
Or change the properties of every document:
Regards,
Ajlan Huda.

Double-sided print no longer showing up since upgrade to 10.10.2

Since updating to 10.10.2, I can't find the double-sided print option on the Print menu (single-sided print and copy have worked fine) for my Epson WF-3640. I am upgrading again now to 10.10.3 to see if that helps. Any ideas?

Since updating to 10.10.2, I can't find the double-sided print option on the Print menu (single-sided print and copy have worked fine) for my Epson WF-3640. I am upgrading again now to 10.10.3 to see if that helps. Any ideas?

7410 double sided printing

Well here I am again with printing problems.
I have a Mac Book Pro using OS 10.9.5, Mavericks. I managed to resolve my Print/Scan problem with Shlomil's help. Also, he helped me some time ago with a double sided printing problem. Now I find I have the same double sided printing problem but am unable to follow his advice (which fixed the problem last time)....
Now, The two sided printing box does not appear on the print drop down menu! So, I went on to the following (using the last advice Shlomil provided)...
"1. Verify the duplex-printing accessory has been installed properly. To verify this open the System Preferences and go to Printers & Scanners. Open the print queue of your printer. Click on Printer Setup and from the tab menu choose Driver. Verify the box next to HP Two-sided Printing Accessory (Duplexer) is checked."
However, when I select the "Open Print Queue" there is no "Printer Setup" on the tab menu. So, I can't verify the "HP Two-sided Printing Accessory (Duplexer) is checked " (unless I'm doing something wrong). I and went on to #2.
2. On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click on Show Deatils to see all available settings.
3. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
I skipped the above step since the two sided printing box does not appear on the print drop down Menu (and no expanded print window available).
I went on to #4.
4. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
5. Select Layout from the drop-down menu.
6. Set the Two-Sided option as Long-Edge binding (Portrait), or Long-Edge binding (landscape).
Now, I don't show a "binding type" In the Layout" selection in the drop-down menu, etc.
Shlomil suggested if this didn't work to reset the printing system. I'm really scared to do that because I have 3 printers and a scanner in different locations. When I selected the reset printing system the drop down said it would delete everything...all printers, scanners, faxes, etc.
Is there any other less severe solution? I'm stumped! This all worked before (two sided printing, print/scan). The only thing I can think of is when I correct permissions or update to a newer OS.
Please HELP!
This question was solved.
View Solution.

Well...I can't believe it! Please disregard my ramblings.
I mucked around in the printer stuff and in System Preferences "Printers & Scanners", selected "Options & Supplies" rather than the "Open Print Queue" and then selected "Options". The "HP Two-sided Printing Accessory (Duplex)" box was located there. It was not checked. Although I don't know how it got unchecked, I checked it and it fixed my problems.
Thanks Again

HP Laserjet 1300 Manual Double Sided Printing with Windows 7

I just purchased a new laptop with windows 7, love the interface but have some hiccups here and there. And the one that is the biggest pain is printing. I have a HP Laserjet 1300 connected via a linksys print server. Single sided printing works just fine, but I used to be able to (and still can from my work laptop running XP and from my wifes Laptop running Vista Home) print double sided manually. But now even though it says duplex, it will not work and I think the Windows Driver believes that it is a duplexer attached to the printer verses a manual feature. Any ideas on how to get my manual double sided printing back?

Nice one...
I found you can also modify the "Manual Duplex Help" section to provide instructions to the user while duplex printing :
The following prn_grp displays pictures similar to the Laserjet 1300 and has the right procedure (take the printed pages and place them in the same orientation in the tray) :
<prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;c5c5f890996e5fc5d7ffd96f8c759f2d ;555a2593970cf8b77ec5e1c722373e36 ;065e3643626aa153eb624120e21031cc ;5541b14acbc6bb39fefc0967181142e0 ;e6885ab28dbc6e127ae4963acf4d8ccc ;8f6b80f605bb593212acd699c0516d06 ;1d9e0f01c72b2d0001e58751826b42ac ;f77381023eb218bd6c75fbb5cd55337e ;8da5efe243e316c3fbd7ccd09d330f48 ;60caa8832f86a2502a3e4f31c6aa82f5 ;d1eb75d092f98ee058366d6d32b1c5d1 ;acb248ba464fba4feeac598ee070e4da;25b289c5a1af52c4c30c70e60d6a5486;
5ad2ab06ec3d7c97c5236b04e461072d;a25c6f53a65697130a90c0bf48622fa1;835a8e29c28829102fb4dcccacf6c3dd;dc488b59d678f119ca11d4425e31bf36;b868c723ee9270bd0d70e96293adacf7;2a51e03acc06b149b4460fda9c7d4560;bb95bf471925e96c47a6a05d3252c357">
<fname name="HPManualDuplexDialogItems">
<option name="InstructionID_01_FACEDOWN-NOROTATE" value="BitmapID_227_StringID_3313"/>
<option name="InstructionID_02_FACEDOWN-NOROTATE" value="BitmapID_505_StringID_3070"/>
<option name="InstructionID_03_FACEDOWN-NOROTATE" value="BitmapID_231_StringID_3065"/>
</fname>
</prn_grp>
More importantly, I was also able to modify the hpcu1306.xml file to enable full 1200 dpi support, by adding the following prn_grp at the end of the "Print Quality" section (after the hp LaserJet 9040 prn_grp and before the closing "</feature>")
<prn_grp models="HP LaserJet 1300;HP LASERJET 1300N;">
<fname name="PrintQualityGroup" default="PQGroup_4">
<option name="PQGroup_2"/>
<option name="PQGroup_4"/>
<option name="PQGroup_5"/>
</fname>
</prn_grp>
NB : PQGroup_2 is for 600 dpi, PQGroup_4 is for FastRes 1200 dpi (fast) and PQGroup_5 is for ProRes 1200 dpi (finer, slower, more memory used).
The modified hpcu1306.xml file is available here : http://pastebin.com/6UxtcSaZ

How can I do 2 sided printing with eprint?

I have a printer that can do 2 sided printing, but when I document prints using eprint. It is only printing single sided which is a waste of paper. How can I fix eprint to autoprint using 2 sided printing?

Hey Gamalielle!
Currently there isn't a way to duplex (2-sided) print with ePrint. But just so you know, you aren't the first customer that has suggested we add that as a feature to ePrint. HP is always looking for suggestions to improve our ePrint services and this may get added in the future.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Double Sided Printing through ePrint

Similar Messages

Maybe you are looking for