Double Tapping causes my mouse pointer to shift or move.

I am new to Mac. I got a WHITE macbook 13" about three weeks ago and while I am learning to switch from PC to Mac I found out about the great options the trackpad can offer to make my switch easier, BUT I have noticed "and this is very annoying to me because I love double tapping" that when I double tap the mouse pointer shifts or moves a little bit. this might not be a major thing except for the fact when you are double tapping and the pointer shifts or moves slitly to select something entirly different. I know you don't have to double tap on the red, green, and yellow cicles on an open window but this example might help: lets say you want to close an open windows and you want to double tap on the red circle but the mouse shifted to double tap on the yellow circle instead. you get what I am trying to say....anyone can help me or tell me if this is a software problem or hardware problem...i have allready updated all softwares and i also played with the trackpad congirations.

I think it is a hardware problem. You might have someone else operate your computer and see if it performs that way for them. The trackpad is kind of a personal thing in that it is relying on the capacitive affect of your finger and we are all different. If it works poorly for another person I would suggest you take it to any Apple store and show them.
Another thing you might try because it does make a minor difference in track pad performance is to cut a sticky note such that it will fit flat on the trackpad. The trackpad should still work very well with the note if your trackpad is good, and it might even fix your problem.
And as you mentioned, you don't need to double tap the red 'close window' circle.

Similar Messages

  • 7th generation.  I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I

    I bought a new iPod 7th generation.  I can't just touch music, I have to double tap it. I can't select songs with a tap, I have to double tap it.  I then have to double tap play/pause, or next song selection to move to next song.  I also can't use my finger to scroll volume.

    Hello HoopsMD,
    Welcome to the Apple Support Communities!
    I understand that the display on your iPod nano (7th generation) is not responding to your touch as you would expect. In this situation, I would recommend reading over the attached article and working through the steps within to help resolve this issue. 
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Display
    Follow these steps if your iPod doesn't respond to your input or has a display-related issue.
    Screen is unresponsive and displays Apple logo or white screen
    Reset iPod by holding down the Sleep/Wake button and Home button until you see the Apple logo appear. If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes.
    If the Apple logo does not appear, or if the iPod is not seen in iTunes, connect it to iTunes and try to restore.
    Touch screen does not accept input
    Clean the screen with a microfiber polishing cloth.
    Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
    If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
    The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
    Sync with iTunes and restore the iPod.
    Have a great day,
    Joe

  • Wireless mouse pointer which does not move after boot *sometimes*

    Hi,
    I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
    After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
    I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
    This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
    Has anyone an idea?
    Last edited by zebulon (2012-03-21 07:22:53)

    Thanks.
    Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
    Not working:
    [ 22.745]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 22.765] X Protocol Version 11, Revision 0
    [ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
    [ 22.765] Build Date: 05 March 2012 05:59:48AM
    [ 22.765]
    [ 22.765] Current version of pixman: 0.24.4
    [ 22.765] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
    [ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.841] (==) No Layout section. Using the first Screen section.
    [ 22.841] (**) |-->Screen "screen1" (0)
    [ 22.841] (**) | |-->Monitor "monitor1"
    [ 22.841] (**) | |-->Device "device1"
    [ 22.841] (**) Option "IgnoreABI" "True"
    [ 22.841] (**) Ignoring ABI Version
    [ 22.841] (==) Automatically adding devices
    [ 22.841] (==) Automatically enabling devices
    [ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 22.866] Entry deleted from font path.
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.871] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.871] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.871] (II) Loader magic: 0x7cef60
    [ 22.871] (II) Module ABI versions:
    [ 22.871] X.Org ANSI C Emulation: 0.4
    [ 22.871] X.Org Video Driver: 12.0
    [ 22.871] X.Org XInput driver : 16.0
    [ 22.871] X.Org Server Extension : 6.0
    [ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "record" will be loaded by default.
    [ 22.872] (II) "dri" will be loaded even though the default is to disable it.
    [ 22.872] (II) "dri2" will be loaded by default.
    [ 22.872] (II) LoadModule: "dbe"
    [ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.955] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.955] compiled for 1.12.0, module version = 1.0.0
    [ 22.955] Module class: X.Org Server Extension
    [ 22.955] ABI class: X.Org Server Extension, version 6.0
    [ 22.955] (II) Loading extension DOUBLE-BUFFER
    [ 22.955] (II) LoadModule: "v4l"
    [ 22.955] (WW) Warning, couldn't open module v4l
    [ 22.955] (II) UnloadModule: "v4l"
    [ 22.955] (II) Unloading v4l
    [ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 22.955] (II) LoadModule: "extmod"
    [ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.968] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.968] compiled for 1.12.0, module version = 1.0.0
    [ 22.968] Module class: X.Org Server Extension
    [ 22.968] ABI class: X.Org Server Extension, version 6.0
    [ 22.968] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.968] (II) Loading extension XFree86-VidModeExtension
    [ 22.968] (II) Loading extension XFree86-DGA
    [ 22.968] (II) Loading extension DPMS
    [ 22.968] (II) Loading extension XVideo
    [ 22.968] (II) Loading extension XVideo-MotionCompensation
    [ 22.968] (II) Loading extension X-Resource
    [ 22.968] (II) LoadModule: "glx"
    [ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
    [ 24.018] compiled for 4.0.2, module version = 1.0.0
    [ 24.018] Module class: X.Org Server Extension
    [ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 24.018] (II) Loading extension GLX
    [ 24.018] (II) LoadModule: "record"
    [ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 24.026] (II) Module record: vendor="X.Org Foundation"
    [ 24.026] compiled for 1.12.0, module version = 1.13.0
    [ 24.026] Module class: X.Org Server Extension
    [ 24.026] ABI class: X.Org Server Extension, version 6.0
    [ 24.026] (II) Loading extension RECORD
    [ 24.026] (II) LoadModule: "dri2"
    [ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.034] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.034] compiled for 1.12.0, module version = 1.2.0
    [ 24.034] ABI class: X.Org Server Extension, version 6.0
    [ 24.034] (II) Loading extension DRI2
    [ 24.034] (II) LoadModule: "nvidia"
    [ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 24.120] compiled for 4.0.2, module version = 1.0.0
    [ 24.120] Module class: X.Org Video Driver
    [ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 24.161] (++) using VT number 7
    [ 24.734] (II) Loading sub module "fb"
    [ 24.734] (II) LoadModule: "fb"
    [ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.832] (II) Module fb: vendor="X.Org Foundation"
    [ 24.832] compiled for 1.12.0, module version = 1.0.0
    [ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.832] (II) Loading sub module "wfb"
    [ 24.832] (II) LoadModule: "wfb"
    [ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.003] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.003] compiled for 1.12.0, module version = 1.0.0
    [ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.003] (II) Loading sub module "ramdac"
    [ 27.003] (II) LoadModule: "ramdac"
    [ 27.003] (II) Module "ramdac" already built-in
    [ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 29.070] (==) NVIDIA(0): RGB weight 888
    [ 29.070] (==) NVIDIA(0): Default visual is TrueColor
    [ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
    [ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 31.411] (II) NVIDIA(GPU-0): stereo.
    [ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 31.503] (**) NVIDIA(0): enabled on all display devices.)
    [ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 31.538] (II) NVIDIA(0): Validated modes:
    [ 31.538] (II) NVIDIA(0): "1920x1080"
    [ 31.538] (II) NVIDIA(0): "1280x720"
    [ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 31.566] (--) Depth 24 pixmap format is 32 bpp
    [ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 31.571] (II) NVIDIA(0): Config Options in the README.
    [ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 31.608] (II) Loading extension NV-GLX
    [ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 31.630] (==) NVIDIA(0): Backing store disabled
    [ 31.630] (==) NVIDIA(0): Silken mouse enabled
    [ 31.631] (**) NVIDIA(0): DPMS enabled
    [ 31.631] (II) Loading extension NV-CONTROL
    [ 31.631] (II) Loading extension XINERAMA
    [ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 31.631] (II) Loading sub module "dri2"
    [ 31.631] (II) LoadModule: "dri2"
    [ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 31.631] (II) Module dri2: vendor="X.Org Foundation"
    [ 31.631] compiled for 1.12.0, module version = 1.2.0
    [ 31.631] ABI class: X.Org Server Extension, version 6.0
    [ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
    [ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 31.631] (==) RandR enabled
    [ 31.631] (II) Initializing built-in extension Generic Event Extension
    [ 31.631] (II) Initializing built-in extension SHAPE
    [ 31.631] (II) Initializing built-in extension MIT-SHM
    [ 31.631] (II) Initializing built-in extension XInputExtension
    [ 31.631] (II) Initializing built-in extension XTEST
    [ 31.631] (II) Initializing built-in extension BIG-REQUESTS
    [ 31.631] (II) Initializing built-in extension SYNC
    [ 31.631] (II) Initializing built-in extension XKEYBOARD
    [ 31.631] (II) Initializing built-in extension XC-MISC
    [ 31.631] (II) Initializing built-in extension SECURITY
    [ 31.631] (II) Initializing built-in extension XINERAMA
    [ 31.631] (II) Initializing built-in extension XFIXES
    [ 31.631] (II) Initializing built-in extension RENDER
    [ 31.631] (II) Initializing built-in extension RANDR
    [ 31.631] (II) Initializing built-in extension COMPOSITE
    [ 31.631] (II) Initializing built-in extension DAMAGE
    [ 31.632] (II) Initializing extension GLX
    [ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.105] (II) LoadModule: "evdev"
    [ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 32.188] (II) Module evdev: vendor="X.Org Foundation"
    [ 32.188] compiled for 1.12.0, module version = 2.7.0
    [ 32.188] Module class: X.Org XInput Driver
    [ 32.188] ABI class: X.Org XInput driver, version 16.0
    [ 32.188] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.188] (**) Power Button: always reports core events
    [ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.188] (--) evdev: Power Button: Found keys
    [ 32.188] (II) evdev: Power Button: Configuring as keyboard
    [ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 32.188] (**) Option "xkb_rules" "evdev"
    [ 32.188] (**) Option "xkb_model" "evdev"
    [ 32.188] (**) Option "xkb_layout" "gb"
    [ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.240] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.240] (**) Power Button: always reports core events
    [ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.241] (--) evdev: Power Button: Found keys
    [ 32.241] (II) evdev: Power Button: Configuring as keyboard
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
    [ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 32.241] (**) UVC Camera (046d:09a4): always reports core events
    [ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
    [ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
    [ 32.242] (**) Option "xkb_rules" "evdev"
    [ 32.242] (**) Option "xkb_model" "evdev"
    [ 32.242] (**) Option "xkb_layout" "gb"
    [ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 32.242] (II) No input driver specified, ignoring this device.
    [ 32.242] (II) This device may have been added with another device file.
    Working:
    [ 21.623]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 21.642] X Protocol Version 11, Revision 0
    [ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
    [ 21.642] Build Date: 05 March 2012 05:59:48AM
    [ 21.642]
    [ 21.642] Current version of pixman: 0.24.4
    [ 21.642] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
    [ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21.727] (==) No Layout section. Using the first Screen section.
    [ 21.727] (**) |-->Screen "screen1" (0)
    [ 21.727] (**) | |-->Monitor "monitor1"
    [ 21.727] (**) | |-->Device "device1"
    [ 21.727] (**) Option "IgnoreABI" "True"
    [ 21.727] (**) Ignoring ABI Version
    [ 21.727] (==) Automatically adding devices
    [ 21.727] (==) Automatically enabling devices
    [ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21.752] Entry deleted from font path.
    [ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.757] Entry deleted from font path.
    [ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.765] Entry deleted from font path.
    [ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.765] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21.765] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21.765] (II) Loader magic: 0x7cef60
    [ 21.765] (II) Module ABI versions:
    [ 21.765] X.Org ANSI C Emulation: 0.4
    [ 21.765] X.Org Video Driver: 12.0
    [ 21.765] X.Org XInput driver : 16.0
    [ 21.765] X.Org Server Extension : 6.0
    [ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "record" will be loaded by default.
    [ 21.766] (II) "dri" will be loaded even though the default is to disable it.
    [ 21.766] (II) "dri2" will be loaded by default.
    [ 21.766] (II) LoadModule: "dbe"
    [ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 21.833] (II) Module dbe: vendor="X.Org Foundation"
    [ 21.833] compiled for 1.12.0, module version = 1.0.0
    [ 21.833] Module class: X.Org Server Extension
    [ 21.833] ABI class: X.Org Server Extension, version 6.0
    [ 21.833] (II) Loading extension DOUBLE-BUFFER
    [ 21.833] (II) LoadModule: "v4l"
    [ 21.833] (WW) Warning, couldn't open module v4l
    [ 21.833] (II) UnloadModule: "v4l"
    [ 21.833] (II) Unloading v4l
    [ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 21.833] (II) LoadModule: "extmod"
    [ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 21.846] (II) Module extmod: vendor="X.Org Foundation"
    [ 21.846] compiled for 1.12.0, module version = 1.0.0
    [ 21.846] Module class: X.Org Server Extension
    [ 21.846] ABI class: X.Org Server Extension, version 6.0
    [ 21.846] (II) Loading extension MIT-SCREEN-SAVER
    [ 21.846] (II) Loading extension XFree86-VidModeExtension
    [ 21.846] (II) Loading extension XFree86-DGA
    [ 21.846] (II) Loading extension DPMS
    [ 21.846] (II) Loading extension XVideo
    [ 21.846] (II) Loading extension XVideo-MotionCompensation
    [ 21.846] (II) Loading extension X-Resource
    [ 21.846] (II) LoadModule: "glx"
    [ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
    [ 22.913] compiled for 4.0.2, module version = 1.0.0
    [ 22.913] Module class: X.Org Server Extension
    [ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 22.913] (II) Loading extension GLX
    [ 22.913] (II) LoadModule: "record"
    [ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.921] (II) Module record: vendor="X.Org Foundation"
    [ 22.921] compiled for 1.12.0, module version = 1.13.0
    [ 22.921] Module class: X.Org Server Extension
    [ 22.921] ABI class: X.Org Server Extension, version 6.0
    [ 22.921] (II) Loading extension RECORD
    [ 22.921] (II) LoadModule: "dri2"
    [ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.929] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.929] compiled for 1.12.0, module version = 1.2.0
    [ 22.929] ABI class: X.Org Server Extension, version 6.0
    [ 22.929] (II) Loading extension DRI2
    [ 22.929] (II) LoadModule: "nvidia"
    [ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 23.014] compiled for 4.0.2, module version = 1.0.0
    [ 23.014] Module class: X.Org Video Driver
    [ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 23.047] (++) using VT number 7
    [ 23.721] (II) Loading sub module "fb"
    [ 23.721] (II) LoadModule: "fb"
    [ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.428] (II) Module fb: vendor="X.Org Foundation"
    [ 24.428] compiled for 1.12.0, module version = 1.0.0
    [ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.428] (II) Loading sub module "wfb"
    [ 24.428] (II) LoadModule: "wfb"
    [ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 26.531] (II) Module wfb: vendor="X.Org Foundation"
    [ 26.531] compiled for 1.12.0, module version = 1.0.0
    [ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.531] (II) Loading sub module "ramdac"
    [ 26.531] (II) LoadModule: "ramdac"
    [ 26.531] (II) Module "ramdac" already built-in
    [ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 27.811] (==) NVIDIA(0): RGB weight 888
    [ 27.811] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 29.881] (II) NVIDIA(GPU-0): stereo.
    [ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 29.997] (**) NVIDIA(0): enabled on all display devices.)
    [ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 30.033] (II) NVIDIA(0): Validated modes:
    [ 30.033] (II) NVIDIA(0): "1920x1080"
    [ 30.033] (II) NVIDIA(0): "1280x720"
    [ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 30.068] (--) Depth 24 pixmap format is 32 bpp
    [ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 30.072] (II) NVIDIA(0): Config Options in the README.
    [ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 30.119] (II) Loading extension NV-GLX
    [ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 30.149] (==) NVIDIA(0): Backing store disabled
    [ 30.149] (==) NVIDIA(0): Silken mouse enabled
    [ 30.149] (**) NVIDIA(0): DPMS enabled
    [ 30.149] (II) Loading extension NV-CONTROL
    [ 30.150] (II) Loading extension XINERAMA
    [ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 30.150] (II) Loading sub module "dri2"
    [ 30.150] (II) LoadModule: "dri2"
    [ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 30.150] (II) Module dri2: vendor="X.Org Foundation"
    [ 30.150] compiled for 1.12.0, module version = 1.2.0
    [ 30.150] ABI class: X.Org Server Extension, version 6.0
    [ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
    [ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 30.150] (==) RandR enabled
    [ 30.150] (II) Initializing built-in extension Generic Event Extension
    [ 30.150] (II) Initializing built-in extension SHAPE
    [ 30.150] (II) Initializing built-in extension MIT-SHM
    [ 30.150] (II) Initializing built-in extension XInputExtension
    [ 30.150] (II) Initializing built-in extension XTEST
    [ 30.150] (II) Initializing built-in extension BIG-REQUESTS
    [ 30.150] (II) Initializing built-in extension SYNC
    [ 30.150] (II) Initializing built-in extension XKEYBOARD
    [ 30.150] (II) Initializing built-in extension XC-MISC
    [ 30.150] (II) Initializing built-in extension SECURITY
    [ 30.150] (II) Initializing built-in extension XINERAMA
    [ 30.150] (II) Initializing built-in extension XFIXES
    [ 30.150] (II) Initializing built-in extension RENDER
    [ 30.150] (II) Initializing built-in extension RANDR
    [ 30.150] (II) Initializing built-in extension COMPOSITE
    [ 30.150] (II) Initializing built-in extension DAMAGE
    [ 30.151] (II) Initializing extension GLX
    [ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.624] (II) LoadModule: "evdev"
    [ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 30.633] (II) Module evdev: vendor="X.Org Foundation"
    [ 30.633] compiled for 1.12.0, module version = 2.7.0
    [ 30.633] Module class: X.Org XInput Driver
    [ 30.633] ABI class: X.Org XInput driver, version 16.0
    [ 30.633] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.633] (**) Power Button: always reports core events
    [ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.633] (--) evdev: Power Button: Found keys
    [ 30.633] (II) evdev: Power Button: Configuring as keyboard
    [ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 30.633] (**) Option "xkb_rules" "evdev"
    [ 30.633] (**) Option "xkb_model" "evdev"
    [ 30.633] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.677] (**) Power Button: always reports core events
    [ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.677] (--) evdev: Power Button: Found keys
    [ 30.677] (II) evdev: Power Button: Configuring as keyboard
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 30.677] (**) Option "xkb_rules" "evdev"
    [ 30.677] (**) Option "xkb_model" "evdev"
    [ 30.677] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
    [ 30.677] (II) No input driver specified, ignoring this device.
    [ 30.677] (II) This device may have been added with another device file.
    [ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
    [ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
    [ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 30.678] (**) UVC Camera (046d:09a4): always reports core events
    [ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
    [ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 30.678] (II) No input driver specified, ignoring this device.
    [ 30.678] (II) This device may have been added with another device file.
    I note the differences start there:
    (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    vs
    (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    Could my Logitech camera interfere with the keyboard/mouse unifier detection?

  • Bug report: double-tapping keyboard does not always bring up cursor movement.

    For instance, in:
    The text entry bar for maps
    The subject line of added meetings
    The text entry widget of the Slack Android app
    I'd love this to work consistently.

    oh I get what you're saying now.
    unfortunately, you're not missing anything. that is how they have it set up in 3.0
    if you're unhappy with this design, give Apple feedback at http://www.apple.com/feedback/iphone.html

  • Tap clicking touchpad causes mouse pointer to move (ALPS)

    Usually when tap clicking on a touchpad, any pointer movements are suppressed as a tap is detected. This does not happen on my Arch machine. Whenever I tap click, the mouse pointer jumps several pixels in some direction.
    How can I stop this?
    (Arch is fully updated and since kernel 3.3 my touchpad is detected as "AlpsPS/2 ALPS DualPoint TouchPad".)

    $ synclient -l
    Parameter settings:
    LeftEdge = 300
    RightEdge = 1700
    TopEdge = 210
    BottomEdge = 1190
    FingerLow = 12
    FingerHigh = 15
    FingerPress = 128
    MaxTapTime = 180
    MaxTapMove = 107
    MaxDoubleTapTime = 180
    SingleTapTimeout = 180
    ClickTime = 100
    FastTaps = 0
    EmulateMidButtonTime = 75
    EmulateTwoFingerMinZ = 141
    EmulateTwoFingerMinW = 7
    VertScrollDelta = 48
    HorizScrollDelta = 48
    VertEdgeScroll = 0
    HorizEdgeScroll = 0
    CornerCoasting = 0
    VertTwoFingerScroll = 1
    HorizTwoFingerScroll = 1
    MinSpeed = 1
    MaxSpeed = 1.75
    AccelFactor = 0.0819336
    TrackstickSpeed = 40
    EdgeMotionMinZ = 15
    EdgeMotionMaxZ = 80
    EdgeMotionMinSpeed = 1
    EdgeMotionMaxSpeed = 195
    EdgeMotionUseAlways = 0
    TouchpadOff = 0
    LockedDrags = 0
    LockedDragTimeout = 5000
    RTCornerButton = 0
    RBCornerButton = 0
    LTCornerButton = 0
    LBCornerButton = 0
    TapButton1 = 1
    TapButton2 = 2
    TapButton3 = 3
    ClickFinger1 = 1
    ClickFinger2 = 1
    ClickFinger3 = 1
    CircularScrolling = 0
    CircScrollDelta = 0.1
    CircScrollTrigger = 0
    CircularPad = 0
    PalmDetect = 0
    PalmMinWidth = 10
    PalmMinZ = 100
    CoastingSpeed = 20
    CoastingFriction = 50
    PressureMotionMinZ = 15
    PressureMotionMaxZ = 80
    PressureMotionMinFactor = 1
    PressureMotionMaxFactor = 1
    GrabEventDevice = 1
    TapAndDragGesture = 1
    AreaLeftEdge = 0
    AreaRightEdge = 0
    AreaTopEdge = 0
    AreaBottomEdge = 0
    HorizHysteresis = 12
    VertHysteresis = 12
    ClickPad = 0

  • How Do I Hide Mouse Pointer While Typing In Firefox

    Only in firefox, and only recently am I having problems typing anything through firefox, as the slightest touch of my laptops touch pad causes the mouse pointer to jump along with my typing cursor. This is causing major issues as I conduct all y business emails through firefox. If this cant be helped I will have to start using Internet Explorer Again. EVERY other program I use auto hides the mouse while typing, Except FF....
    == This happened ==
    Every time Firefox opened
    == Not sure, but I believe a week or so ago

    I have had the same problem despite having Hide Pointer When Typing checked in Mouse Properties. Damn annoying. I thought I finally found a solution with a free utility called "Park Cursor Aside" at http://www.makeuseof.com/dir/parkcursoraside-hide-mouse-cursor-when-typing/.
    Works great in Chrome and everywhere else EXCEPT Firefox. How about it Mozilla, are you are giving me another reason to switch over to Chrome? Please fix this. Thank you.

  • Mouse Pointer shows "Edit Cursor" "|" where it should be a arrow (pointer)

    I have noticed that at times the mouse pointer shows a Edit cursor when it should be
    a standard mouse arrow.
    This happens when a leave one application and navigate to another application.
    I am able to use the "|" cursor to click, but it seems rather odd.
    I would really like to know if someone else has noticed this?

    Are you using Fast User Switching (FUS)? Are you running an application that keeps a window always on top?
    I have encountered a reproducible problem which causes the mouse pointer to fail to revert to the default arrow. I do not know if it is a general OS X issue, or caused by this specific app only (I just reported the problem to the app vendor, will report back on the resolution).
    In my case, if user "A" is running a program that has an "always on top" window, and that application has the "focus", and I then use FUS to switch to any other user, the mouse pointer for that user will "stick" in its most recent variation - be it a pointing finger (for a link), an edit cursor, a window resize cursor, etc. If you move from a link for example to a text box, the cursor will change to the new form, but it will not revert to the default arrow. To "solve" the problem, do this:
    before using FUS to change to another user, click on another application (e.g. the Finder), so that the problem application does not have the "focus". Does any of this relate to your problem?

  • Jerky mouse pointer for migrated user

    I've upgraded my old MacBook Air to a MacBook Pro with Retina display and now I have a weird problem with a jerky mouse pointer. Certain applications (like Photoshop CS5.5 or VmWare Fusion 5) cause the mouse pointer to move jerky on the screen (it looks like there are 3 mouse pointers, about one inch apart on the screen). This only happens with a user migrated with Migration Assistant. I created a new user on the same computer, and the new user doesn't have the issue. I tried repairing the permissions and clearing the caches to no avail. Next step will be moving the applications preferences. I tried to search for this problem online but, apparently, nobody else is experiencing it. Any other ideas/suggestions?

    Apparently the issue is gone after restarting the system in Safe Mode.

  • Black border around my mouse pointer

    Since a few days, I have a thick black border around my mouse pointer, always following the movement of the pointer. How can I bring this away?
    Thanks for help
    Ueli

    Welcome to Discussions - you need to go to System Prefs>Universal Access>Zoom, turn it OFF and make sure, that under Zoom options "show preview rectangle" is UNchecked.
    Please post back and tell us if this works,
    Miriam

  • Stops at Blue Creen with mouse pointer

    Got my computer back from Apple with new Logic Board and Video Card and it had been fine for one day. I will explain this all just so all the facts are out there.
    I have a 2.26GHz 8-core and the now Blue Screened 3GHz 8-core both connected to the internet and network.
    I can connect the the 2.26 from the 3.0 but I cannot connect to the 3 from the 2.26 even though it shows up on the network. I checked everthing but it just says maybe it has the wrong IP or it isn't available. Both probably wrong.
    So I was messing with my network settings and decided to restart them both only the 2.26 came up but the 3 that just was repaired got hung at the Blue Screen. I restarted 5 times and yes it chimes and all but when the Blue Screen comes up it hangs but the mouse pointer is available and moves around.
    Kind of weird. I put in my Hardware test disc and it is running right now. I have a lot of memory so it will be a while. I should have taken all but 2 gigs out and did it since the riser should show memory issue instantly but oh well.
    I have read it could be a partition issue. I HOPE I don't have to take it back after 2 days already for more repairs.
    Basically I have read it could be any of the following.
    1) Memory
    2) Graphics Card
    3) Partition
    But nothing serious.
    Anyone got a clue.
    Thanks.
    PS I saw the repair bill and this is a great story.
    It had the Logic Board for like $576 and to buy one is the same cost from Apple or more anywhere else.
    The Video Card is the 7300GT which you can get on Ebay for couch change yet on the bill the cost was $443. I was shocked out of my shoes.
    I wonder if I spend $500 on them on Ebay can I sell them to Apple for a few grand.
    Note: For all the flack the 7300GT gets I ran Maya on a 32" and a 24" screen with not one issue I know of. I read there was something(On the Maya site they list cards and issues) but I never saw it. I did and do all types of Flash and Graphics as well and it runs like a charm.

    Ok problem solved but not the way you might think or would want to do it.
    I started up with the Disk Utility and did a Hardware Test and it Passed.
    I next tried to start up in Safe Mode which was a No Go.
    I then tried the Pram and SMC Reset and Nada.
    I finally popped the Disc Utility back in and did a Disk Permission Test and it had probably 35-50 errors. How this happens I have no clue. I repaired all of it.
    I next did a Disc Check and it passed.
    So after the last 2 things one would figure EVERYTHING is passing the Tests Apple gives you the computer would start up easy. WRONG.
    It did not do anything new just sat at the Blue Screen with the Mouse Pointer which I could move around.
    I finally had enough and just did a reinstall where it moves all the files to a folder so you don't lose them and wallah it works again.
    I have come to the conclusion that there was just a big Disc Error that the CD's could not see or fix or something.
    I really wish I knew what it was so I wouldn't be worried in the future but the one relief is being able to recover the files during reinstall.
    Another note was that I could now connect to this computer with the other Mac Pro which I couldn't prior to the Blue Screen and reinstall.
    Woot Woot!

  • Hi double tapping the mouse causes it to zoom in

    Hi so double tapping the mouse causes it to zoom in!!!!
    How do I stop this happening   (apart from not double tapping the mouse)
    Many thanks to whosoever it was who answered my first call to tell me this
    Dragon388

    Go to System Preferences>Trackpad>Scroll & Zoom:
    Is Smart Zoom enabled? If so, disable it.
    Clinton

  • Unable to Double Tap with TrackPad or B/T Mouse after 10.8.2 upgrade

    Hello:
    Could some kind person possibly help a Mac newb?
    For some strange reason, I am unable to Double Tap using *either* my TrackPad or Bluetooth Mouse immediately after upgrading my Mid 2011 iMac from OS X 10.6.8 to 10.8.2.  Single tapping on any file highlights the file name and double tapping the file name (not the icon) allows renaming the file (which I believe is all normal).  All other gestures appear to function normally - just can't double-tap TrackPad or double-click the Mouse.
    ALREADY TRIED:
    Shutting down and removing all power cords and cables to the computer.
    Removing the batteries from TrackPad & Mouse.
    Creating a new user account.
    Reinstalling OS X 10.8.2 including updates 3 times.
    Booting into Safe Mode then running Disk Utility to Repair Disk Permissions and Repair Disk.
    Running Capture_Data.dmg and sending the files to Apple Support.
    Apple Senior Advisor said that their Software Engineer did not notice anything out of the ordinary, but is now digging deeper.
    Deleted com.apple.Bluetooth.plist & com.apple.PowerManagement.plist per Apple.
    Cleared browser cache & history, then emptied trash.
    I am currently working with a Senior Advisor at Apple since 02.01.2013 (10 days) to follow-up on the same issue as a previous case opened on 01.14.2013 after upgrading the OS X on 01.12.2013.  Apple originally suggested that I take my iMac to the Apple Store for diagnostic testing, which I have avoided because everything was working fine before the upgrade and then I noticed the same issue with the my mouse.  I decided to hold off wiping the system clean, doing a clean install then migrating my data and settings from the backup until my Apple Advisor tells me if their Software Engineer discovers anything else after they dig a little deeper into the diagnostic report.  But that could take weeks and right clicking to open files is getting old real fast.  Besides, my Adobe CS6 apps rely heavily (if not entirely) on double & triple clicks, so I am paralyzed from using any of their products.
    Since Apple said they have no reported cases like this, I have done a lot of digging on my own before writing this.  Sorry about the long post, but I was hoping to provide as much detail as possible to be respectful of everyones valuable time.  Any help or suggestions would be greatly appreciated.
    Regards,
    Doug Klimek

    Problem Solved in less than 5 minutes - Thank you Travis @ AppleCare!
    SOLUTION:
    Set the Mouse & Trackpad Double-Click speed to any value other than "Fast". The slider bar has 10 settings (1=Slow to 10=Fast) so I set mine to 9 and it works fine.  But your system may respond differently, so you might want to start with #5 (Middle) and go from there.  FWIW, the #10 setting (Fast) does work, however I had to use one finger on each hand because I couldn't tap fast enough with only one hand.
    HERE'S WHAT TO DO:
    Click the Apple Logo > System Preferences > System > Accessibility > Mouse & Trackpad > Double-click speed > Drag slider to the #5 setting (Middle of bar) then tweak to your liking
    FYI ONLY:
    FWIW, I had no Double-Click problems when setting the Mouse & Trackpad Tracking to #10 (Fast) as long as the Double-Click speed (above) was set to any value other than #10 (Fast).  I am only mentioning this to share what I learned.
    Click the Apple Logo > System Preferences > Hardware > Mouse > Point & Click > Tracking > Drag slider bar to your liking
    Click the Apple Logo > System Preferences > Hardware > Trackpad > Point & Click > Tracking Speed > Drag slider bar to your liking
    Hope this information is helpful to anyone before consider wiping their disk clean and doing a fresh M/L reinstall like i almost did.

  • Trackpad keeps "bouncing" the mouse pointer when I tap to select (MacBook Pro, 15" Retina, 2014)

    Hi, I got a brand new 15" MacBook Pro a week or so back and had problems with the trackpad - when I tap to select an item the mouse pointer "bounces" off the item I'm trying to select. It happens randomly - not every time. Very irritating. Supplier got me a replacement machine, and it's doing the same thing! Is anyone else experiencing this issue? I migrated all my data and settings from my old Mac Pro (2011 model, also running Mavericks) via Time Machine - could that have an impact? Not using any non-Apple power supplies or other devices. Any input would be welcomed.

    TrevorBurroughs wrote:
    Hi, I got a brand new 15" MacBook Pro a week or so back and had problems with the trackpad - when I tap to select an item the mouse pointer "bounces" off the item I'm trying to select. It happens randomly - not every time. Very irritating. Supplier got me a replacement machine, and it's doing the same thing! Is anyone else experiencing this issue? I migrated all my data and settings from my old Mac Pro (2011 model, also running Mavericks) via Time Machine - could that have an impact? Not using any non-Apple power supplies or other devices. Any input would be welcomed.
    Migrating user from one machine to another should not be a cause of your symptoms.
    Curious two machines in a row. Did this happen before you transferred data/ or di you check.
    You have 14 days to return/exchange if you are not satisfied.
    You could Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379   but I don't see it.
    Did you try making adjustments to trackpad settings
    >Sys Pref>Trackpad> Point & Click>speed

  • I updated my operating system to Maverick. How can I get the ability to double tap my mouse to enlarge the page back?

    I updated my operating system to Maverick 10.9.4. How do I get the ability to double tap my mouse so the page will enlarge back?

    Thank you so very much! I have got 1 Masters online and am working on #2. Yet I am so very computer illiterate. I was able to fix it in less than a minute. Again, thank you.

  • HT1222 My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    My mouse pointer in finder is not working by double clicking on the application.I have to double click and select open for opening the application.Can you suggest me some settings to fix this problem?

    Hi,
    Try this ... reboot your Mac and see if double clicking works again.
    Also, you can just select the Application you like to open and hold down the Command+O to open.
    Also, did you check your setting for the mouse in system preferences.
    Dimaxum

Maybe you are looking for