Double Vision after updating to 10.4.6

After upgrading to 10.4.6 I am getting a screen that has "double vision" ... as soon as the loading Screen with the blue bar comes up, and it remains this way. If I reset the Pram at startup, this problem does not happen. This is a new issue after installing the combo update going from 10.4 to 10.4.6. Any Help would be nice.... come on Apple.

Thanks for the help Vipir, I tried your suggestion, but the monitor prefs have not changed since the previous versions were installed. After the same thing happened everytime I booted into 10.4.6 I decided to boot into 9.2.2 and see if the same result occured, and as I thought, it was an MacOS X issue.
When I booted into 9.2.2 though I was prompted with the software updates for 9, and one of these updates was for the Geforce Video Bios. The video card must not have had the updates installed , and Mac OS X was assuming the the card was up to date, and this must have been the cause; it has been flawless ever since.
Thank you again Vipir for your help.
- Icem

Similar Messages

How do I get my iPod Touch to be on regular speech instead of double time after updating new software?

I downloaded the new software. Since then my podcasts are on double time which is very hard to listen to. Also, I can't find out where the timer is for the individula podcasts and I can't seem to go back and listen to things over. There are only seems to be a volume control. Please help. I use it every night and now it is unusable.

Are you using the seperate Podcast app?
Have you looked at the Users Guide?
iPod touch UG iOS 6.1

After updating to IOS 7.1 my us holidays doubled in my calendar. How do I get rid of one of them?

After updating to IOS 7.1 my us holidays doubled in my calendar. How do I get rid of one of them?

You probably figured it out by now! But if someone else is wondering...
Open the icalendar app up and click on the word Calendar (bottom of page). A box pops up called 'Show Calendars', scroll to the bottom of the page to 'Other' and uncheck US Holidays. The next time you sync your ipad from your iMac, it will only copy US holidays from your computer calendar.

Double NAT error status after updating to firmware 7.1

This may be a bug. My Airport Extreme was working perfectly, but after updating to firmware 7.1, with no other changes to configuration, it is now reporting a Double NAT error. Both wired and wireless clients still have access to the WAN and each other, so everything still works. I know I can ignore the error, but I wonder if anyone else has seen this issue?
I have a possibly unusual setup -
My DSL modem creates an address of 192.168.1.47 and hands that to the APE as its WAN address. I've configured the APE to hand out addresses to its client machines on the LAN in the 192.168.2.x range and it does that correctly. So there is no actual conflict - the WAN address is 192.168.1.47 and the client addresses are all in the 192.168.2.x range. Could the new software be assuming that the 192.168.1.x range is the NAT range without verifying the actual range is really 192.168.2.x? Seems unlikely, but it appears to be the case.
Any insights on this appreciated....
mac mini Mac OS X (10.4.9) my Airport Extreme is less than a month old

When iTunes attempts to sync photos from iPhoto, it shows the amount of the iPod drive taken up with photos, BUT NO usage on the drive graph itself.
When Sync Photos from iPhoto is deselected and another sync attempted, iTunes asks if photos should be removed from iPod, despite the previous sync being unsuccessful. When I choose to remove the photos, the amount shown taken up by photos disappears.
Does anyone know what the error message quoted in my question above means?
iBook G4 1Ghz/iMac G5 iSight Mac OS X (10.4.3) iPod Photo 40GB

After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do

After updates to newer vision iOS 7.0.4 my iPhone 4 is become slow, so please tell me what to do.

There was something you could have done, bought extended warrenty, would have covered this. Apple is outside of it's one year warrenty policy, they had the agreement, and when you update you also sign an agreement that you would be responsiable for any problems that occur.
The best thing you can do is the Out of warrenty for 199$; you didn't get additional coverage; something bad happen, be glad they offer the OOW.

After update to iOS 7.0.6 double gmail notifycations appears

After update to iOS 7.0.6 double gmail notifycations appears on both iphone and ipad! Anyone know why?

I also have this going on with my 5s and my wife's 4s after the 7.0.6 update.

Communities icon doubled on main menu after updati...

I'm wondering how to fix my main menu becuase after updating my phone's firmware, the communities icon has now doubled. I feel kinda obsessive compulsive about this. can somebody help how to fix this? thanks

nokia are aware of this and its been worked on.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After updating to the latest iphone 4 software, my triple click to voice over no longer works. I have double and triple checked all settings and it just doesn't work anymore. Advice?

After updating my iphone 4 last, my triple click to voice over stopped working. I have checked all settings and it just isn't working anymore. Is this an issue with the latest update? Any way to fix this?

Try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
Then, recheck your Settings: Settings>General>Accessibility>Triple-click Home...

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

After Update to iPhoto 9.4.3 some pictures shown black

I'm working in a iMac with OSX 10.9.5. I've just updated my iPhoto with a newer version of iLife 11 to iPhoto 9.4.3 step by step as described here from Old Todd: running 10.9.5 OS X and iLife 11, now can't use iPhoto The capacity of the iPhoto library is around 180 GB with around 25.000 Objects. First everything seems to be fine. I could see all rolls, albums, calendar etc. But than i discovered, that in some cases, I could see the thumbnails but when I do a double click on it, I can only see a totally black frame. When I'm going to export that frame and look for the result, the original picture was exported correctly.
So, I tried to repair permissions and rebuild database. But this won't fix it. Than I tried to recreate thumbnails. After that, she the application is still open, everything seems to be fixed. But when I quit the application and open-up again, the same problem appears. Sometimes I can see the pictures for a second and they seemed to be squeezed somehow. What can I do? Any idea?
Thanks for helping.
Frank

I suggest that you read Terence's post in this thread and try the fixes he suggests
Terence DevlinJan 8, 2015 8:23 AM
Re: After Update to iPhoto 9.4.3 some pictures shown blackin response to frank251 | This helped me
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
LN

After update to IOS 7x some apps are crashing a lot & system Reboots!

After installing IOS 7.1.1 on 1 x iPhone 4 16GB, 3x iPhone 4s 64GB and 1 iPad mini 64GB, Apps started crashing which worked well on IOS 5.5 & IOS 6. After Updating to IOS 7, the problems started. Some of my favourite games like "Call Of Duty: Black Ops Zombies"and Avengers Initiative keep crashing at the start. "Call Of Duty" reported Low Memory even though I turned off Background App Refresh, Re-downloaded the Apps, performed full system reboot, enabled "Reduce Motion", enabled "Increase Contrast" and still no luck. I have also deleted many of my Apps to free up storage space but still no improvement. Other problems major problems are that the screen freezes and Apps become unresponsive requiring a full system reboot. This happens very often and also when trying to update or download Apps the system crashes and often Reboots itself. I believe the main problem is with low memory because I ran an App called "Battery Doctor" which shows that 82% of the 512MB RAM is already been used before any Apps have even been started leaving only 89MB of free RAM which is hardly enough to run decent Games on. There are many occasions when FaceTime wouldn't allow Sign In and in iTunes Apps would revert to how they were after applying changes. When adding Contacts, changes would often revert back. Also I have noticed that the iPhone sometimes would display the wrong amount of free Storage space and it would sometimes show like 5GB available and then go to 0MB available and cause crashes during downloads. Another problem I found was that when Apps start up, a white patch shows on the screen temporarily which wasn't apparent before IOS 7x. When adding contacts I noticed that with "Increase Contrast" disabled, some of the entries added did not display while typing with the keyboard and the text was greyed out making it difficult to read what you are typing. Now I wish that I had not updated to IOS 7 as suggested because it has messed up my £700 iPhones and I don't see a way of downgrading without Jailbreaking making my phones worthless. We are very very upset and disappointed because we paid so much money for the devices and have not had them long. We do not want to buy a newer device just because of the update messing up our phones. Also I do not want to try and restore from a previous backup because the last few times I've tried and it does not restore everything. It is very time consuming and I am too ill to go through all that again on each device. Also I believe the restore does not give me the choice of going back to IOS 5.5 or IOS 6. Therefore if Apple could give the opportunity to update to IOS 5.5 or IOS 6 for older devices and have a separate update for IPhone 5s which have a faster processor and double RAM (1GB) then I would be very grateful. I would also like to add the fact that IOS 7.x.x drains the battery very quickly. After reading the many complaints about IOS 7 update & my personal experience, I now regret updating and also fear that future updates may render my iPhones useless. I bought my iPhone 4s direct from Apple and paid a premium for Factory Unlocked iPhones. I think the iPhones may now be out of warranty and are very unhappy with this situation. Please, please please could you send a fix in another update!

Actually DIESEL they do force you to update. my wife has not update hers yet to ios6 and none of the apps work at full tilt anymore because they are all updated for ios 6....Apple is now making you either update(and ruin your iphone 4s) or buy the new iphone 5(which i doubt will have any of the problems people with iphone 4s are having).
Since updating my 4s i have lost signal, data has been very low at best. i can not access any apps or they open up and do not refresh. I use to have 4bars at my work and now i have 1.

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Why is my ipad2 really slow after updating to IOS 6.1.2

Why is my ipad2 really slow after updating to IOS 6.1.2

Try this.
Quit all apps completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working.

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working . When I try to open the app the screen just flashes and then nothing happens. Built in apps works fine . Please help

I realize that installing apps is not the problem. Installing another app from the app store is a recommended troubleshooting tip from Apple if all of the third party apps will not open. It resets your iTunes authorization when you install the app because you have to enter your password.
If you didn't install another app try it. Read this support article as well.
iOS: Troubleshooting applications purchased for the App Store
Try this as well. Quit all apps, reset the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad.
Go back to Settings>Store>Sign in and then see if the apps will launch.

Xorg doesn't start after update

After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)

sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23)

Double Vision after updating to 10.4.6

Similar Messages

Maybe you are looking for