Double VPN (Cisco IPSEC + PPTP) no longer works in Yosemite

Hi there.
I used to use two VPN connections pre-Yosemite, I could establish a Cisco IPSEC VPN using the native VPN in Mavericks, and then establish another VPN through that connection to connect to a PPTP VPN.
It is not possible anymore, but if instead of using Apple's Cisco VPN implementation I use Cisco's AnyConnect, then sure enough I can use the native PPTP VPN to connect to my lab.
MacBook Pro --> Corporate VPN (Cisco) --> Lab VPN (PPTPD)
Whether I use Cisco AnyConnect or native VPN, I can always ping the PPTP server, but can't establish a VPN if using native VPN.
Anybody noticed something change and maybe has a fix for that?

The issue was with my tech department after all...

Similar Messages

PPTP no longer working through Cisco 2901

Up until yesterday, the PPTP VPN to our main office was working as ordered.
Yesterday our ISP statically assigned our IP address to us, and it went from ip address dhcp to ip address x.x.x.x
Everything else works fine, internet and whatnot, but the VPN connection will no longer work. It just times out. I'm wondering if it's something in my config that is blocking it. Any help would be greatly appreciated.
As you can see, this isn't in anyshape or form an advanced configuration. So I don't see what the problem could be.
! Last configuration change at 17:54:14 UTC Wed Jun 15 2011
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname RemoteRouter
boot-start-marker
boot-end-marker
enable password xxxx
no aaa new-model
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
license udi pid CISCO2901/K9 sn FTX1436819T
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.10.254 255.255.255.0
ip nat inside
ip virtual-reassembly
interface GigabitEthernet0/0.2
encapsulation dot1Q 2
ip address 192.168.4.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 10.1.1.244 255.255.255.0
interface GigabitEthernet0/1
ip address x.x.x.x 255.255.255.128
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Serial0/0/0
no ip address
shutdown
no fair-queue
no clock rate 2000000
router eigrp 1
network 10.0.0.0
network 192.168.4.0
redistribute static
passive-interface GigabitEthernet0/0
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 10 interface GigabitEthernet0/1 overload
ip route 0.0.0.0 0.0.0.0 x.x.x.x
ip route 10.1.10.0 255.255.255.0 10.1.1.1
access-list 10 permit 192.168.4.0 0.0.0.255
access-list 10 permit 10.1.1.0 0.0.0.255
access-list 10 permit 10.1.10.0 0.0.0.255
control-plane
line con 0
password xxx
line aux 0
line vty 0 4
password xxx
login
scheduler allocate 20000 1000
end

The other side of the VPN is a TMG server hosted at our main office. I can connect to it off site, and others were connected to it remotely as well, but for some reason users at that remote site can no longer connect to the VPN.
I talked to my ISP wondering if there was something that was blocked due to the change from dhcp to static IP addresses, but they don't see anything.

Mavericks 10.9.5 VPN Cisco IPSec stopped working. Please help.

My machine with (what might be) relevant software:
Macbook Pro mid 2012
Mavericks 10.9.5
Server 3.2.1
Xcode 6.0.1
I use VPN to connect to Cisco IPSec.
This used to work fine. Two days ago I noticed it stopped working.
Over the few days before I installed Server and used some services, but switched them off after using.
I used the DNS service and automated xcode build, but all switched off.
When trying to connect to Cisco IPSec VPN I now get some kind of timeout, with the following in my log:
02/10/2014 09:42:44.768 configd[24]: IPSec connecting to server 64.13.171.130
02/10/2014 09:42:44.771 configd[24]: network changed.
02/10/2014 09:42:44.772 configd[24]: IPSec Phase1 starting.
02/10/2014 09:42:44.773 configd[24]: SCNC: start, triggered by (402) SystemUIServer, type IPSec, status 0, trafficClass 0
02/10/2014 09:42:45.221 racoon[59453]: accepted connection on vpn control socket.
02/10/2014 09:42:45.221 racoon[59453]: IPSec connecting to server 64.13.171.130
02/10/2014 09:42:45.222 racoon[59453]: Connecting.
02/10/2014 09:42:45.222 racoon[59453]: IPSec Phase 1 started (Initiated by me).
02/10/2014 09:42:45.226 racoon[59453]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
02/10/2014 09:42:45.227 racoon[59453]: >>>>> phase change status = Phase 1 started by us
02/10/2014 09:42:45.230 configd[24]: network changed.
02/10/2014 09:42:45.415 racoon[59453]: port 62465 expected, but 0
02/10/2014 09:42:45.465 racoon[59453]: IKEv1 Phase 1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
02/10/2014 09:42:45.466 racoon[59453]: >>>>> phase change status = Phase 1 started by peer
02/10/2014 09:42:45.466 racoon[59453]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
02/10/2014 09:42:45.466 racoon[59453]: IKEv1 Phase 1 Initiator: success. (Initiator, Aggressive-Mode).
02/10/2014 09:42:45.466 racoon[59453]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
02/10/2014 09:42:45.466 racoon[59453]: IPSec Phase 1 established (Initiated by me).
02/10/2014 09:42:45.469 configd[24]: network changed.
02/10/2014 09:42:45.655 racoon[59453]: IPSec Extended Authentication requested.
02/10/2014 09:42:45.655 configd[24]: IPSec requesting Extended Authentication.
02/10/2014 09:42:45.661 configd[24]: network changed.
02/10/2014 09:42:49.984 xpcproxy[59462]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
02/10/2014 09:43:36.000 kernel[0]: IOHIDSystem: postEvent LLEventQueue overflow.
02/10/2014 09:44:45.759 racoon[59453]: IKE Packet: receive success. (Information message).
02/10/2014 09:44:45.759 configd[24]: IPSec Controller: IKE FAILED. phase 4, assert 0
02/10/2014 09:44:45.760 configd[24]: IPSec disconnecting from server 64.13.171.130
02/10/2014 09:44:45.761 racoon[59453]: IPSec disconnecting from server 64.13.171.130
02/10/2014 09:44:45.761 racoon[59453]: failed to send vpn_control message: Broken pipe
02/10/2014 09:44:45.763 racoon[59453]: IPSec disconnecting from server 64.13.171.130
02/10/2014 09:44:45.766 configd[24]: network changed.
02/10/2014 09:44:45.774 configd[24]: network changed.
Any suggestions on what I could possibly have broken and how to fix it? I need this VPN connection for work.

A guess, but could this be an issue with changed permissions somehow? Something seems to stop the password popup to show. And then authentication fails.

Airport Extreme 802.11ac VPN Passthrough (IPSec, PPTP, and L2TP)

Hi There,
I just got an Airport Extreme 6th Gen and set it up in a breeze using Airport Utility on Mavericks. It was actually too simple to configure but I cannot connect to our company's VPN using Cisco IPSEC. I can't find any settings within Aiport Utility that says about VPN Passthrough. My router mode is in DHCP and NAT mode by the way.
Have anyone experienced this issue and solved it? I know our VPN is working since I upgraded from a Cisco SMB router and if I plug it back in I can connect to it.
Any help will be much appreciated.
Thanks!

What modem is the AE plugged into and is it a router as well??
The AE cannot handle vpn passthrough easily if you have double NAT.. well it just won't work.
If you are using a PC it also may not work because it will need upnp which airport does not provide. Manually forward the ports but it will only work if the AE is the one and only router in the network.
You may still have issues.. as port 500 could well be used by the AE with btmm.. you will need to not use btmm to use ipsec .. but I haven't explored it fully.

Double Click on Magic Mouse No Longer Works after 10.9.1 Mavericks Upgrade

I just recently updated to Mavericks 10.9.1 and once the computer restarted, I noticed that double-click on my Magic Mouse no longer worked. I searched the forum and couldn't find anyone experiencing this. I also went into System Preferences --> Mouse but there is nothing about enabling double-click or adjusting double-click speed on there.
Would appreciate if someone were able to help me solve this. Thanks!

Try resetting the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

VueScan no longer works with Yosemite

I have a MacBook Pro (15 Inch, Mid 2009) Processor,3.06 GMz Intel Core 2 Duo GMz Memory 8GB 2067 MHz DDR 3. After loading Yosemite (OS 10.10), VueScan no longer works. VueScan can't recognize my scanner.
Any ideas.

Did you download and install the latest driver (v12.34.0) for the HP4500 from HP?
HP-ENVY-4500-series_v12.34.0.dmg
More from HP info here:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-125217- 5&cc=us&dlc=en&lc=en&os=4182&product=5304877&sw_lang=

Western Digital MyBook Studio no longer works after Yosemite update

A little while ago (Jan 30) I updated Yosemite, and now my Western Digital My Book Studio (using firewire) shows up but no longer works - no Time Machine, or Super Duper back-ups. Does anyone know why this has happened, and what can be done to fix it?

I should add that the drive works fine with another MBP running OSX 10.6.8. Again, with 10.10.2 it either doesn't work or is incredibly slow.

Illustrator will no longer work after Yosemite upgrade!!!

I downloaded Yosemite on my Macbook Pro and now Illustrator will no longer work. A warning pops up that I need the newest Java runtime which I already have. What should I do? Please help

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Hide Update no longer working in Yosemite

I've looked at many threads for an answer to this, but while many are close, I've yet to find an answer to this specific issue.
Before Yosemite, you could "hide" software update notifications from the App Store by Control (right) clicking in the body of the Update notice in the App Store and be presented with the option to "Hide Update". Since moving to Yosemite, this no longer works for me. It's not just that you don't get the option to hide - sometimes you do, sometimes you don't. And even when you do, it doesn't work. For example, right now I have Notices for 2 updates, one for Digital Raw Compatibility, and one for iMovie, neither of which I want. When I Control click on the "Raw" update the little dialog box to "Hide Update" appears but clicking on it does nothing. With the iMovie update, Control clicking does not even present that option.
Not an earth shattering issue, but that little red number in the AppStore dock icon and the daily Notifications bug me out.

CenterForAnts wrote:
Same issue. Somebody please fix Hide Update.
Post your concerns on the Product Feedback & the Bug Report website.
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.
Apple involvement. Apple may respond to questions but does not formally provide technical support on the Site. Any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.

My hp laser jet 3050 no longer working since Yosemite upgrade. Help????

Since i upgraded to yosemite, my HP laserjet 3050 printer no longer working. i've tried uninstalling and reinstalling and still not working. Any suggestions?

Have you checked the HP web site for driver updates?
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
HP Print Drivers

Canon MP600 printer no longer working with Yosemite

I have an iMac, Mid 2011 with OS X Yosemite Version 1010.2 installed. It has 4gb of memory and a 2.7GHz Intel Core i5 processor. Of my 1TB of storage I have 934.81 GB free.
Since returning from a recent holiday my Canon Pixma MP600 printer has not been recognised by my iMac and I am no longer able to print from it. It did work with Yosemite before I left and I have been unable to restore the printer on the on the Printers and Scanners list. I have tried to uninstall the printer software and go back a step to install it with OS Mavericks but having gone through that process once it did not work.
Does anybody have any suggestions?

Hi trev1124
I have tried a number of ways to reinstall my printer but it does not appear in the drop down menu under Printers and Scanners and no matter what I seem to do will it come up. I am just about at my wits end with this. Short of binning my current printer (which was working perfectly well by the way) and buying a new one I do not know what else to do.
If anyone has any other suggestions I would be most grateful.

Mail: CTRL Click popup gone (Copy, Paste, Open in. etc) popup no longer working in Yosemite Mail.

Hi Folks,
Current model Macbook Air, Up-to-date Yosemite. In Mail, the Control Click function no longer works on attachments. I've been using that as an option all the time, and today when I went to CTRL click on a file (PDF) to open it a different application, I realized that you no longer can even get a popup to appear. I need to open a pdf in Adobe Acrobat Pro instead of in preview. While I can certainly use workarounds, this is annoying. Is this intentional or a glitch ?.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

IMovie speed editor no longer working since Yosemite upgrade

After upgrading to Yosemite yesterday, I've noticed that the speed editor no longer works. It used to be a turtle icon but now it's a clock (3rd icon from the right in the attached image)..but a clock that can never be clicked on. Also Command R is supposed to activate it, but that doesn't work either.
Anyone have any tips about this? This bug is making an already late project much later.

I found the cause for my problem, and probably for yours also: disable the Wrap Timeline option by Unchecking View -> Wrapping Timeline. (I don't know whether this is a bug or "working as designed".)

'screen' no longer works in Yosemite - Resource Busy

For many years I have used USB serial devices to connect to external machines, using commands like
$ screen /dev/tty.usbserial-FTFZXCV 115200
Since the upgrade to Yosemite, this no longer works. The screen commands give an error
'screen cannot open /dev/tty.usbserial-FTFZXCV for R/W - Resource Busy'
There was a similar question from April but that talked about using lost to identify an orphan session.
$ lsof | grep usbserial   # no output
$ pgrep screen # no output.
The permission seems sensible:
$ ls -l /dev/tty.*
crw-rw-rw- 1 root wheel   18,   8 21 Nov 19:42 /dev/tty.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel   18,   6 21 Nov 19:42 /dev/tty.Bluetooth-Modem
crw-rw-rw- 1 root wheel   18,   0 21 Nov 19:42 /dev/tty.usbserial-FTZXCV

From Sony:
In regard to your inquiry, compatible drivers for MAC OS Yosemite will be released by the end of this year.
If needed, please contact me at the phone number below.
Regards,
SONY

Remote app no longer works with Yosemite.

Since downloading Yosemite, my Remote app no longer works. Have also been having recurring problems with email security certificates.

Same problem here after updating my iPad to iOS 6.1 and the Apple TV to the newest firmware. I open the remote app then I select Apple TV the screen switches to connecting to Apple TV but it never finishes it is stuck at connecting to Apple TV. The App has no problem finding the Apple TV but it seems unable to connect, home sharing is activated on the
App, the iPad and the Apple TV.
Tried resetting setting and factory restore on the Apple TV, deleting and installing the Remote App in my iPad 3 but the problem persist.
On a twist the the Remote App on my iPhone 4S updated to iOS 6.1 works perfectly and it has no issues connecting to the Apple TV it seems to be an iPad issue. I will tried connecting to the Apple TV with an updated iPad 2 later and I will report back.

Double VPN (Cisco IPSEC + PPTP) no longer works in Yosemite

Similar Messages

Maybe you are looking for