Doubt about 3.x objects

Hi gurus, I have a doubt.
If we have an new installation of BI 7.0 release, (so it isn't an upgrade or migration..), I can install 3.x version objects? Or this procedure is granted only for systems that have an old installation with the 3.x release?
Regards.

BI7.0 is downward compatible.....
it supports both 3.x as well as 7.0 and as far as objects are concerned infoobjects , cubes , DSOs etc are not affected by BI7.0

Similar Messages

Doubt about Tunning View Objects

Hi !. I have the following doubt about tunning View Objects:
If I have the following configuration on a VO:
All Rows
In Batches Of: 11
As Needed
Access Mode: Scrollable
Range Size: 10
Total Records On The Table: More than 100
What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.

I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
So if the cursor is already open, no need to issue another query.
You can use the HTTP Analyzer to watch network traffic
Monitoring ADF Pages Round-Trips with the HTTP Analyzer
And you can use the logging features of ADF to see the queries being executed.
Declarative View Objects (VOs) for better ADF performance

Doubt about Scan and Update Catalog Objects That Require Updates link

Hi,
I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
how can I know how many objects that required upgrading before I click this link???
in doc.
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
section 17.2.4 Updating Catalog Objects
It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
but I don't find it . my OBIEE version :11.1.1.6.2
conld you pleae help me ??
thank you in advance.

That link should be there in 6 version.
I've verified in 11g6 version doc the same is existing
ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
BTW:
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
Thanks,
http://cool-bi.com

Doubt about a null value assigned to a String variable

Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
        String total = null;
        System.out.println(total);
        total = total+"one";
        System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlos

null is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute.

PCD Audit : What information about the PCD objects are stored in the PCD?

Folks,
Need some information on the information stored in the PCD for audit purposes.
Object = Any PCD object, typically iView, Page, Workset, Role, Group...
1. Creation of any object - Should definately be present in the PCD
2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
Thank you...

Hi,
>>1. Creation of any object - Should definately be present in the PCD
There is no doubt about this.
>>2. Any modification including history - List of all actions on any PCD object - I am sure the last modification is tracked, but can we track every change to the object from creation?
AND
>>3. Deletion of any object? - This I am not sure of - Does the PCD store information about deleted object's like deletion time stamp and the user who deleted etc?
There is no versioning concept in PCD right now, but ofcourse planned for future.
So you cannot track the history and deleted objects, but there exists PCD Repository Manager in KM on which you can activate versioning. Check if this suites your needs. Never tried but logically ever PCD change should get versioned here.
http://help.sap.com/saphelp_nw70/helpdata/en/76/a8934259a5cc6ae10000000a155106/frameset.htm
Greetings,
Praveen Gudapati

Doubt about Integration Directory

Hi Expers,
I have one doubt about ID.
What are the objects we can re-use in the IR And ID.
Please let me know.
Regards
Khanna

Hi Rajesh,
With out Developing of the ID Also my Scenario is Working Fine.
Yes it will work, if you are using the same names for message interface, message mapping and interface mapping.
Beacause in ID an Object key is uniquely assigned for each configuration object.
if it already exist then no need to create another.
Check this link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/7c/7c33419026f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/372f41fe21c059e10000000a155106/frameset.htm
Sachin

Doubt about scope of instance variable

Hi All,
i have a doubt about scope of instance variable.
if i declare a instance variable in servlet , i want to know whether it can be shared(means everywhere ) or not.
thanks in advance
Gopal

The servlet container will create one servlet object, and run multiple threads through its service() / doGet() / doPost() methods.
That means that any instance variables of the servlet are shared between multiple requests, and can cause problems with threads accessing the same variable..
To make your servlets thread-safe
1 - have no instance variables - only use local variables in the doGet/doPost method.
2 - use the session scope for storing variables you need over multiple calls.
Cheers,
evnafets

Doubt about string.intern()

Hello
I have a doubt about string.intern() method.
The document says
When the intern method is invoked, if the pool already contains a string equal to this String object as determined by the String.equals(Object) method, then the string from the pool is returned.
So what is the point of using this intern() method with == or != operators if it aleady calling to equals method internally?
eg:
if (studentObject.getName().intern() == "Student Name") {}cannot be better than
if (studentObject.getName().equals("Student Name")) {}Can someone please explain?

Easy dude.
>
Why do you need to optimize it?>
Because i want to.
I would avoid the whole stupid 100 line if-else by doing a Map of type->object and then just clone() the object. But maybe that might not be suitable or "fast enough" for you.I cannot do above because object have it's own behaviors varying at run time
eg - class One has setOne method and class hundred has setHundred method
. Even if i use a map and clone it again i have to use above comparison for setting those behaviours.
Explain your actual problem you're trying to solve, with actual cases. What are these "one" and "Hundred" classes really? Or is your project so top secret that you can't tell us?It is not secret but big. And I need to make the question understandable. If I post the whole code no one will looking at it.
Now you asking so please have a look.
still I have cleaned up many.
My initial question was how to bit speed up the comparison? And can't i use intern() Because here if I got plenty of rectangles(it is the last) performace sucks.
for (CObject aObject : objList) {
            if (aObject.getType().equals(SConstant.TEMPLATE)) { /* process Template */
                Template tObj = (Template) aObject;
                org.apache.velocity.Template template = VelocityTemplateManager.getInstance().getObjectTemplateFromFile(retemplateProperties.getProperty("PAGE"));
                VelocityContext context = new VelocityContext();
                StringWriter writer = new StringWriter();
                context.put(retemplateProperties.getProperty("BAND_OBJECT"), dtmBand);
                tObj.setTags(writer.toString());
            } else if (aObject.getType().equals(SConstant.LINE)
                    && !isInBandandBandAutoAdjust(aObject)) {
                Line object = (Line) aObject;
                org.apache.velocity.Template template = VelocityTemplateManager.getInstance().getObjectTemplateFromFile(retemplateProperties.getProperty("LINE"));
                VelocityContext context = new VelocityContext();
                StringWriter writer = new StringWriter();
                updateContextWithCheckShifting(context, object);
                context.put(retemplateProperties.getProperty("LINE_OBJECT"), object);
                template.merge(context, writer);
                object.setTags(writer.toString());
            } else if (aObject.getType().equals(SConstant.IMAGE) /* process Image */
                    && !isInBandandBandAutoAdjust(aObject)) {
                REImage imageObject = (REImage) aObject;
                org.apache.velocity.Template template = VelocityTemplateManager.getInstance().getObjectTemplateFromFile(retemplateProperties.getProperty("IMAGE"));
                VelocityContext context = new VelocityContext();
                updateContextWithCheckShifting(context, imageObject);
                context.put(retemplateProperties.getProperty("IMAGE_OBJECT"), imageObject);
                mageObject.setTags(writer.toString());
               else if (aObject.getType().equals(SConstant.RECTANGLE) /* process Rectangle */
                    && !isInBandandBandAutoAdjust(aObject)) {
                Rectangle rectangleObject = (Rectangle) aObject;
                org.apache.velocity.Template template = VelocityTemplateManager.getInstance().getObjectTemplateFromFile(retemplateProperties.getProperty("RECTANGLE"));
                VelocityContext context = new VelocityContext();
                StringWriter writer = new StringWriter();
                updateContextWithCheckShifting(context, rectangleObject);
                context.put(retemplateProperties.getProperty("RECTANGLE_OBJECT"), rectangleObject);
                template.merge(context, writer);
                rectangleObject.setTags(writer.toString());
            }And masijade
Thank you very much for the better explanation.

Doubt about Component binding....

I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).
Please clarify this doubt...........

JNaveen wrote:
I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".This is regardless of the component binding. JSF creates a component tree and stores it in the session. With component binding you can link between the backing bean and the component without the need for UIViewRoot#findComponent().
Think your problem lies somewhere else. Use a profiler.
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).With the component binding you can get hold of the whole component from the tree in the backing bean. Useful if you want to do a bit more than only holding the component's value, with which you usually do with the value binding.

Different change request about the same object

Hi Gurus,
I have some doubts about CR (change request) from one system to another, such as from development system to quality or quality to production.
If I have 2 or more CUSTOMIZING CR about the same object Can I say that they are however identical (they contain the same information)?
For example on the customizing table:
record1 contains value 'A' --> CR number 1 is opened
record1 contains value 'B' --> CR number 2 is opened
If now I transport CR number 1 I transport value 'B'.
And the same if I transport CR number 2.
Is it correct? Both CR points to the actual value of the record?
Instead if I have 2 or more WORKBENCH CR I know they "remember" the history of the modifications:
For example on a program with only 1 istruction:
data: x.
--> CR number 1
data: x,y.
--> CR number 2
What happen If I transport the 2 CR simultaneously (selecting both from STMS) ?
What will be the result in quality/production system? Which CR "wins"?
Thanks in advance
Guido

At time of release from DEV, the current object version or table content is written into the transport data file, thus "detached" from further changes in DEV.
Now if two transport requests 1 and 2 contain the same object in two versions (older and newer) and are being imported into QA, the following scenarios are possible:
- 1 is imported first, then 2: newer version will be in QA -> OK
- 2 is imported first, then 1: older version will be in QA -> not OK
- both are imported at same time: newer version will be in QA -> OK (STMS checks when the requests were added to the import queue and sorts accordingly)
Thomas

Doubts about some popular function modules?

Hi all,
I have doubts about these function modules (see in parenthesis)
ws_filename_get (to get the file name at ...?)
ws_query (to get file size and environment variables from the presentation server to the ...?)
upload and download (what are the new function modules used in place of these (I know they are obsolete now)
what is the Object oriented equivalents of these functions?
Thanks.
Charles.
++++++++++++++++++++++++++++++++++++

(1)What is the use of ws_filename_get? Please be specific in your answer, about where the file resides: application server, presentation server or the ABAP program.
It is simply providing an interface for the user to choose a filename which resides on the frontend PC(presentation server). As suggested already, this has been replaced with FILE_OPEN_DIALOG method of the class CL_GUI_FRONTEND_SERVICES.
2)What is the use of ws_query? Please be specific in your answer, about where the file resides: application server, presentation server or the ABAP program.
Again, already answered, this has been replace by multiple more specific methods of the same class mentioned above.
How can GUI_UPLOAD be a substitute of Upload? It is a substitute of WS_UPLOAD as upload is used to transfer data from presentation server to the ABAP program, whereas the other two are used to get it from presentation server to the application server.
They all transafer data from the presentation to your application. They are all interchangable(in a sense), but you should be using the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.
Regards
Rich Heilman

Doubt about Select statement.

Hi folks!!
             I have a few doubts about the select statements, it may be a silly things but its useful for me.
what is   difference between below statment.
1)SELECT * FROM TABLE.
2)SELECT SINGLE * FROM TABLE
3)SELECT SINGLE FROM TABLE.
Hope i will get answer,thanks in advance.
Regards
Richie..

Hi,
try this and if possible use sap help.i mean place the cursor on select and press F1.
             Types of select statements:
1.     select * from ztxlfa1 into table it.
             This is simple select statement to fetch all the data of db table into internal table it.
   2.   select * from ztxlfa1 into table it where lifnr between 'V2' and 'V5'.
        Thisis using where condition between v2 and v5.
4. select * from ztxlfa1 where land1 = 'DE'. "row goes into default table work Area
5. select lifnr land1 from ztxlfa1
        into corresponding fields of it   "notice 'table' is omitted
         where land1 = 'DE'.
          append it.
           endselect.
     Now data will go into work area. and then u will add it to internal table by
        append statement.
6.   Table 13.2 contains a list of the various forms of select as it is used with internal tables and their relative efficiency. They are in descending order of most-to-least efficient.
Table 13.2 Various Forms of SELECT when Filling an Internal Table
Statement(s)                                   Writes To
select into table it                                    Body
select into corresponding fields of table it   Body
select into it                                    Header line
select into corresponding fields of it           Header line
7. SELECT VBRK~VBELN
       VBRK~VKORG
       VBRK~FKDAT
       VBRK~NETWR
       VBRK~WAERK
       TVKOT~VTEXT
       T001~BUKRS
       T001~BUTXT
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
    FROM VBRK
    INNER JOIN TVKOT ON VBRKVKORG = TVKOTVKORG
    INNER JOIN T001 ON VBRKBUKRS = T001BUKRS
    WHERE VBELN IN DOCNUM AND VBRK~FKSTO = ''
   AND VBRK~FKDAT in date.
Select statement using inner joins for vbrk and t001 and tvkot table for this case based on the conditions
8. SELECT T001W~NAME1 INTO TABLE IT1_T001W
FROM T001W INNER JOIN EKPO ON T001WWERKS = EKPOWERKS
WHERE EKPO~EBELN = PURORD.
here selecting a single field into table it1_t001winner join on ekpo.
9. SELECT BUKRS LIFNR EBELN FROM EKKO INTO CORRESPONDING FIELDS OF IT_EKKO WHERE     EBELN IN P_O_NO.
ENDSELECT.
SELECT BUTXT   FROM T001 INTO IT_T001 FOR ALL ENTRIES IN IT_EKKO WHERE BUKRS = IT_EKKO-BUKRS.
ENDSELECT.
APPEND IT_T001.
here I am using for all entries statement with select statement. Both joins and for all entries used to fetch the data on condition but for all entries is the best one.
10. SELECT AVBELN BVTEXT AFKDAT CBUTXT ANETWR AWAERK INTO TABLE ITAB
             FROM VBRK AS A
             INNER JOIN TVKOT AS B ON
             AVKORG EQ BVKORG
             INNER JOIN T001 AS C ON
             ABUKRS EQ CBUKRS
             WHERE AVBELN IN BDOCU AND AFKSTO EQ ' ' AND B~SPRAS EQ
             SY-LANGU
             AND AFKDAT IN BDATE AND AVBELN EQ ANY ( SELECT VBELN FROM
            VBRP WHERE VBRP~MATNR EQ ITEMS ).
    Here we are using sub query in inner join specified in brackets.
Thanks,
chandu.

Doubt about Bulk Collect with LIMIT

Hi
I have a Doubt about Bulk collect , When is done Commit
I Get a example in PSOUG
http://psoug.org/reference/array_processing.html
CREATE TABLE servers2 AS
SELECT *
FROM servers
WHERE 1=2;
DECLARE
CURSOR s_cur IS
SELECT *
FROM servers;
TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
s_array fetch_array;
BEGIN
OPEN s_cur;
LOOP
    FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
    FORALL i IN 1..s_array.COUNT
    INSERT INTO servers2 VALUES s_array(i);
    EXIT WHEN s_cur%NOTFOUND;
END LOOP;
CLOSE s_cur;
COMMIT;
END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
could crash redo log ?
using 9.2.08

muttleychess wrote:
If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
SY.

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

Doubt about uses of OBIEE

I have some doubts about the possible uses of OBIEE. It happens that using OBIEE sometimes users demand report of an "analytical" type, that is aggregated analysis through OBIEE’s Answers, selecting data from dimension tables and measures from fact tables. That’s the ordinary purpose of business intelligence tools!!!
Some other times though, users demand to perform through Answers analyses of an "operating" type, that is simple extractions of some fields belonging to dimension tables, linked between each other through joins, (hence without querying fact tables): that happens because some of the tables brought in the datawarehouse are not directly linked to any fact table. In this way users want to use Answers to visualize data even for this kind of extractions (or operating reports).
Is this a correct use of the tool or is it just a “twisted” way of using it, always leading eventually to incorrect extractions? If that’s the case, is it possible to use instead BI Publisher, extracting the dataset through the "Sql Query" mode in a visual manner? The problem of the latter solution, in my case, relies in the fact that users are not enough skilled from the technical point of view: they would prefer to use Answers for every extraction, belonging both to the first type (aggregations) and the second one (extractions), that I just described. Can you suggest a methodology to clarify this situation?

Hi,
I understand your point... But I think OBIEE doesn't allow having dimension "on their own", they must be joined to a fact table somehow. This way, when you do a query in answers using fields of two dimension tables a fact table should be always involved. When dimensions are conformed, several fact tables may be used, and OBIEE uses the "best" one in terms of performance. However, there are some tricks that you can do to make sure a particular fact table is used, like using the "implicit fact column" in the presentation layer.
So back to your point, using OBIEE for "operational" reporting as you call it is a valid option in my experience, but you have to make sure that the underlaying star schema supports the logic that your end users expect when they use just dimension fields.
Regards,

Doubt about 3.x objects

Similar Messages

Maybe you are looking for