Doubt about configuration IPCCX 5.0

Hi Guys,
My Customer have a solution with 02 IPCCX Server version 5.0 (Publisher and Subscriber). I would like know if is possible configure any parameter in IPCCX to that inform (about alarm, e_mail, or another form) when the IPCCX to stop generate of backup. Is there this possibility in IPCCX?
Thank You,
Wilson

Hi,
UCCX can be polled by an SNMP collector and also send alerts to a syslog server on the network. You can have any SNMP collector poll UCCX and you will get events back, like the one you have described, if the Cisco Alarm Service is running. All subprocesses of UCCX report their alerts to this process which then serves them to the collector when it is polled.
Alternatively, you can use the AppAdmin->System->Alarm Configuration to configure a syslog server and the level of alarms that are sent. Then, use AppAdmin->Tools->Alarm Definition to see which ones you want to filter.
You're most likley going to filter/trap:
Catalog MCVD-ARCHIVE_MGR
Name BACKUP_FAILED
Description Backup of the cluster failed
Severity CRITICAL_ALARM

Similar Messages

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

Doubts about use of REPORTS_SERVERMAP with Forms11g HA

Hi,
I'm configuring a Linux 64bits Forms/Reports 11g HA environment, the point is that i have two nodes, each one with its Forms and Reports servers, let's say FormsA and ReportsA for the first node and FormsB and ReportsB for the seconde node.
i want FormsA to be able to call reports from ReportsB and FormsB to be able to call reports from ReportsA.
I've been reading about REPORT_SERVERMAP
http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_conf003.htm#autoId5
But i have some doubts about its use:
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
2. The link provided says "Using RUN_REPORT_OBJECT. If the call specifies a Reports Server cluster name instead of a Reports Server name, the REPORTS_SERVERMAP environment variable must be set in the Oracle Forms Services default.env file"
In fact i'm using RUN_REPORT_OBJECT but
what is the Reports Server cluster name ?? and where do i find that name ??
3. Is this configuration well defined:
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
4. At forms applications when using RUN_REPORT_OBJECT, can i assume that the report server name will be the cluster name specified at the REPORTS_SERVERMAP ??
5. Which files should i modify rwservlet.properties or default.env ??
Hope you can help me :)
Regards
Carlos

Hi,
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
--> In such case what could go wrong is
Suppose Run_report_object executed jobs successfully to ReportsA
But web.show_document command for getjobid failed ( as ReportsA went down by this time)
--> You will not get the output shown ( though job was successful)
If shared cache was enabled, then Even if ReportsA is down, other cluster member ( say ReportsB)
will respond back to web.show_document.
Point 2,
--> Under HA is it highly recommended to use web.show_document ( a servlet call) to execute reports. This is to help use all HA features at the HTTP , Webcache or load balancer level.
However if there is migrated code or Run_report_object is must, then the recommendations as you see in the pointed document is must.
REPORTS_SERVERMAP setting needs to be configured in rwservlet.properties file and also in default.env Forms configuration file to map the Reports Server cluster name to the Reports Server running on the mid-tier where the Load Balancer forwarded the report request.
For example FormsA, ReportsA, cluster name say rep_cluster
default.env file
REPORTS_SERVERMAP=rep_cluster:ReportsA
Where "rep_cluster" is the Reports Server cluster name and "ReportsA" is the name of the Reports Server running on the same machine as FormsA
rwservlet.properties file
<reports_servermap>rep_cluster:ReportsA</reports_servermap>
At default.env this is not a valid entry
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
what is the Reports Server cluster name ?? and where do i find that name ??
--> This is created via EM on the report server side.
Would recommend to refer following documents at the myoracle support repository
How to Setup Reports HA (High Availability - Clusters) in Reports 11g [ID 853436.1]
REP-52251 and REP-56033 Errors When Calling Reports From Forms With RUN_REPORT_OBJECT Against a Reports Cluster in 11g. [ID 1074804.1]
Thanks

Doubt about Tunning View Objects

Hi !. I have the following doubt about tunning View Objects:
If I have the following configuration on a VO:
All Rows
In Batches Of: 11
As Needed
Access Mode: Scrollable
Range Size: 10
Total Records On The Table: More than 100
What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.

I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
So if the cursor is already open, no need to issue another query.
You can use the HTTP Analyzer to watch network traffic
Monitoring ADF Pages Round-Trips with the HTTP Analyzer
And you can use the logging features of ADF to see the queries being executed.
Declarative View Objects (VOs) for better ADF performance

Doubt about the sizing in the CPH

Hi gurus!
I have the following doubt about the sizing in the CPH. I'm going to implement the CCMS BI CONTENT, i read the Note 979581 - Installing and configuring the CCMS BI Content, but in the document called "IT Performance Reporting Using SAP NetWeaver Business Intelligence" you can see images in this link:
http://www.servidor-imagenes.com/show-image.php?id=050236bd91654e16c94a559350611dff
here said how I can calculate the sizing based in Data Record Size per each Metric stored, but in specific, about the example: 20 systems, 17 CPH metrics. are included SCM, BI, ECC, SOLMAN in this 20 systems? And about the 17 CPH Metrics is talking about ratios? what's mean the CPH metrics?, How can I know what is my CPH metrics?
I hope can help me
Best Regards
Ramon Sanchez

this theme has been closed on our enterprise

Doubt about Integration Directory

Hi Expers,
I have one doubt about ID.
What are the objects we can re-use in the IR And ID.
Please let me know.
Regards
Khanna

Hi Rajesh,
<i>With out Developing of the ID Also my Scenario is Working Fine.</i>
Yes it will work, if you are using the same names for message interface, message mapping and interface mapping.
Beacause in ID an Object key is uniquely assigned for each configuration object.
if it already exist then no need to create another.
Check this link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/7c/7c33419026f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/372f41fe21c059e10000000a155106/frameset.htm
Sachin

Doubt about Oracle Acess Manager Identity System

Hi , I have a doubt about the identity system , when I configure the Identity System to use the Data Anywhere where the user is create when I create one in administrative console ? as I know the Data Anywhere is managed by OVD.
Thanks.

And I could connect to the database.With which tool?
>
I wanted to mimic the connection to another system by just copying the c:\oracle folder. The connection was established and works fine.What type of client installation is this? Can you cross check in inventory/logs?

Doubt about preferred or available service.

I have a doubt about preferred or available service.
I have a Oracle RAC with 3 nodes.
I created a service GL, but I didn't setup available instance, only preferred instances with 2 instances (PROD1,PROD2)
srvctl add service -d PROD -s GL -r PROD1,PROD2
My doubt is:
If PROD1 instance dies, I would like to know if rac01 is restored automatically on rac02.
Anybody can help me?
Thanks in advance.
Leonardo.

There are different ways for configure failover... below just an example :
mydatabase.us.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.100.124.91)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.100.124.93)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.100.124.95)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mydatabase.us.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
Or... read the document :
http://docs.oracle.com/cd/B19306_01/network.102/b14213/tnsnames.htm
Regards,
Alex Alvarenga.

Doubt about diference between SAPconsole and SAPmobile

Hello,
     I have been many doubts about diference between sapconsole and sapmobile, if anyone could help me I appreciate.
1) I have ECC6 instaled, the SAP Mobile is compatible with ECC6 or I need of Netweaver Instaled ?
2) If Possible to Install Sap Mobile in ECC6 , I have to Buy a license of sap mobile ?
3) in any product instaled Windows CE have possible to install sap mobile ?
4) In sap console what is the requirement for to do this configuration?
I Anybody to know about this informations please explain for me ?
Thanks

My apology,
    The Basic Diference beteween SAPConsole and SAPMobile is :
SAPConsole ==>
1 ) Don' t need a new Hardaware for to configurate
2 ) Only need a Machine with the IIS service installed
3 ) The SAPGui CD content the SAPCOnsole.exe for configuration
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network( but if to have a entrance in the SAPGUi indicate a SAProuter in another factory is possible to have acesses.. ) is a mandatory. Cause the SAPCOnsle folow the SAPGUI entrances and need a LAN or a WAN configurated.
Advantage
simple to congurated and chip.
Easy to create to new window cause the SAPConsole only plubish this window in Browser.
Disadvantage
Need a lincense for each Poket or Datacolletor, wherever the equipment you will use.
Doesn't have a Database using through Browser (IE6 or IE7) this way , during the processes lost network you go to lost the information not saved.
SAPMobile
1 ) Need the a good Machine with a instance of SAP configurate
2 ) Have to found the EXE in the MarketPlace
3 ) is not publish, and yes a client with the database configurate in equipment
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network
Advantage
Need only one SAP License, doesn't metter how many equipment in use you have.
As the SAPMobile has a Database in the client , if you lost the network it goes to save in the local database and when the network come back , it will to synchronize. This way you don't need to work online every moment, you get to synchronize after.
Disadvantage
You profit in license is your lost in the Machine cause the price of Machine is expensive.
is configurate only in windows Mobile.
The window only can be create for a Developement and not in the SAP, have been created in windows Mobile.
A tip, the both is good but you can do a simple mathematics.
In the SAPConsole how much money you go to spend is the least of the Machine s Price.
If yes confurate the SAPConsole , if not configurate the SAPMobile

Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

Hello All
I hope that you can help me is juts a doubt about 2 check boxes
I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
that i don't know what is the difference
The path is the following
Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert --> Setup EarlyWatch Alert
Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
Thanks and have a nice day

Hello Cherios,
The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
There should now be no doubt about the two check box fields .
Hope this information is helpful.
Regards,
Paul

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Doubt about a null value assigned to a String variable

Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
        String total = null;
        System.out.println(total);
        total = total+"one";
        System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlos

null is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute.

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Doubt about Select statement.

Hi folks!!
             I have a few doubts about the select statements, it may be a silly things but its useful for me.
what is   difference between below statment.
1)SELECT * FROM TABLE.
2)SELECT SINGLE * FROM TABLE
3)SELECT SINGLE FROM TABLE.
Hope i will get answer,thanks in advance.
Regards
Richie..

Hi,
try this and if possible use sap help.i mean place the cursor on select and press F1.
             Types of select statements:
1.     select * from ztxlfa1 into table it.
             This is simple select statement to fetch all the data of db table into internal table it.
   2.   select * from ztxlfa1 into table it where lifnr between 'V2' and 'V5'.
        Thisis using where condition between v2 and v5.
4. select * from ztxlfa1 where land1 = 'DE'. "row goes into default table work Area
5. select lifnr land1 from ztxlfa1
        into corresponding fields of it   "notice 'table' is omitted
         where land1 = 'DE'.
          append it.
           endselect.
     Now data will go into work area. and then u will add it to internal table by
        append statement.
6.   Table 13.2 contains a list of the various forms of select as it is used with internal tables and their relative efficiency. They are in descending order of most-to-least efficient.
Table 13.2 Various Forms of SELECT when Filling an Internal Table
Statement(s)                                   Writes To
select into table it                                    Body
select into corresponding fields of table it   Body
select into it                                    Header line
select into corresponding fields of it           Header line
7. SELECT VBRK~VBELN
       VBRK~VKORG
       VBRK~FKDAT
       VBRK~NETWR
       VBRK~WAERK
       TVKOT~VTEXT
       T001~BUKRS
       T001~BUTXT
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
    FROM VBRK
    INNER JOIN TVKOT ON VBRKVKORG = TVKOTVKORG
    INNER JOIN T001 ON VBRKBUKRS = T001BUKRS
    WHERE VBELN IN DOCNUM AND VBRK~FKSTO = ''
   AND VBRK~FKDAT in date.
Select statement using inner joins for vbrk and t001 and tvkot table for this case based on the conditions
8. SELECT T001W~NAME1 INTO TABLE IT1_T001W
FROM T001W INNER JOIN EKPO ON T001WWERKS = EKPOWERKS
WHERE EKPO~EBELN = PURORD.
here selecting a single field into table it1_t001winner join on ekpo.
9. SELECT BUKRS LIFNR EBELN FROM EKKO INTO CORRESPONDING FIELDS OF IT_EKKO WHERE     EBELN IN P_O_NO.
ENDSELECT.
SELECT BUTXT   FROM T001 INTO IT_T001 FOR ALL ENTRIES IN IT_EKKO WHERE BUKRS = IT_EKKO-BUKRS.
ENDSELECT.
APPEND IT_T001.
here I am using for all entries statement with select statement. Both joins and for all entries used to fetch the data on condition but for all entries is the best one.
10. SELECT AVBELN BVTEXT AFKDAT CBUTXT ANETWR AWAERK INTO TABLE ITAB
             FROM VBRK AS A
             INNER JOIN TVKOT AS B ON
             AVKORG EQ BVKORG
             INNER JOIN T001 AS C ON
             ABUKRS EQ CBUKRS
             WHERE AVBELN IN BDOCU AND AFKSTO EQ ' ' AND B~SPRAS EQ
             SY-LANGU
             AND AFKDAT IN BDATE AND AVBELN EQ ANY ( SELECT VBELN FROM
            VBRP WHERE VBRP~MATNR EQ ITEMS ).
    Here we are using sub query in inner join specified in brackets.
Thanks,
chandu.

Doubt about Bulk Collect with LIMIT

Hi
I have a Doubt about Bulk collect , When is done Commit
I Get a example in PSOUG
http://psoug.org/reference/array_processing.html
CREATE TABLE servers2 AS
SELECT *
FROM servers
WHERE 1=2;
DECLARE
CURSOR s_cur IS
SELECT *
FROM servers;
TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
s_array fetch_array;
BEGIN
OPEN s_cur;
LOOP
    FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
    FORALL i IN 1..s_array.COUNT
    INSERT INTO servers2 VALUES s_array(i);
    EXIT WHEN s_cur%NOTFOUND;
END LOOP;
CLOSE s_cur;
COMMIT;
END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
could crash redo log ?
using 9.2.08

muttleychess wrote:
If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
SY.

Doubt about configuration IPCCX 5.0

Similar Messages

Maybe you are looking for