Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

Hello All
I hope that you can help me is juts a doubt about 2 check boxes
I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
that i don't know what is the difference
The path is the following
Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert --> Setup EarlyWatch Alert
Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
Thanks and have a nice day

Hello Cherios,
The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
There should now be no doubt about the two check box fields .
Hope this information is helpful.
Regards,
Paul

Similar Messages

Difference between auxiliary track volume and send/bus

I'm trying to take it easy on my laptop so I started using AUX tracks for compressors, eqs, etc. that I have on multiple tracks. However, I have a few questions.
When I add an aux track, it is added at -∞. I guess I don't completely understand its function. What is the difference between me pulling this up to 0 or changing the volumes in my original track?
With that in mind, I'm assuming (maybe wrongly) that if I want the full effect/volume to be sent that I set the send to 0 also (the little green circle that I pull up next to the send button).
Am I wrong in any of my logic? I'm just trying to figure out how this all affects volume and what not and what values to set these things at. I had my mix set at individual volumes that I liked. However, when I switched my tracks from all having an individual plug-in to sending them all to a bus, the volumes changed, even when I set the send and the aux track volume to 0.
I know I'm wrong somewhere here! I just don't know where! Can you guys help and point me to a fix and better understanding? Thank you.

Are these the two methods you were talking about?
Yes these are the methods with one note ony !
In the 1st picture the chennel strip sends are routed to Bus 1 - so far so good. But what I see is that you have inserted an EQ on the system Aux which is not so good. In this scenario the chanel strip audio path is dubplicated (one is passing thru the channel strip out 1-2 and the other is splited thru the channel strip Send Knob->Bus->Aux-> Out 1-2 so you EQ the Send path only - OK?
In this scenario you can insert Reverb, Delay, Chorus etc and use them as calssical system FX so the duplicated "send" path just adds some system FX (note the Aux FX plugin must be set to 100% Wet) so you add wet signal to the dry path. You can correct your 1st setup and insert Reveb for instance. After that you can control the reverb abount for each channel strip using the channel strip send knob(s) (currently they all are set to 0dB).
When you want to use say an EQ or Compressor etc then your second setup is OK ! In the second picture you have grouped the chanel strip outputs to one bus/aux so all inserted plugins there will behave as Group "Insert" ones (no duplicated paths here). The second setup is used with say violin, vocal winds group summed to an Aux where you want to EQ, Compress, Pan … the whole group etc.
A.G
www.audiogrocery.com
Author of: Logic GUI Deluxe (Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

Difference between master cost centre and sender cost centre

Hi All,
could you please tell the difference between master and sender cost centre.
I want this information very urgent.
Thanks rakesh

Hi!
The master CT is a default Ct in your system.
In this case the logical pair for master is the "child" cost center -> primary and secondary cost centers..
The sender CT is a different thing logically -> this will be credited while posting. The sender is the one who claims money.
To this type the logical pair is the receiver cost center. While posting the receivers cost center will be debited.
Hope this helps!
Best regards,
Zsolt

Difference between HR support packs and EHP.

Can anyone tell me the difference between HR support packs and EHP

Hi Harish,
Enhancement Packages- SAP enhancement packages for SAP ERP are optionally installed software innovations for SAP ERP 6.0. They include functional enhancements, industry specific functionality, and simplifications u2013 for example, to the user interface. With enhancement packages, you can easily adopt ongoing SAP innovations at a lower cost than full upgrades. In addition, enterprise services are delivered with enhancement packages.
Support Pack - If the same or similar bug is reported by multiple clients or end users, then SAP recognizes such bug corrects them and collects all these corrections in one place and adds some enhancements to the earlier version of SAP and then calls this as a SUPPORT PACK. In simple words collection of SAP NOTES is a SUPPORT PACK.
Enhancement packages are not support packages: Support Packages contain corrections and legal changes, SAP enhancement packages new functionality.
Do let me know if I helped you.
Thanks,
Padmaja.

Doubt about diference between SAPconsole and SAPmobile

Hello,
     I have been many doubts about diference between sapconsole and sapmobile, if anyone could help me I appreciate.
1) I have ECC6 instaled, the SAP Mobile is compatible with ECC6 or I need of Netweaver Instaled ?
2) If Possible to Install Sap Mobile in ECC6 , I have to Buy a license of sap mobile ?
3) in any product instaled Windows CE have possible to install sap mobile ?
4) In sap console what is the requirement for to do this configuration?
I Anybody to know about this informations please explain for me ?
Thanks

My apology,
    The Basic Diference beteween SAPConsole and SAPMobile is :
SAPConsole ==>
1 ) Don' t need a new Hardaware for to configurate
2 ) Only need a Machine with the IIS service installed
3 ) The SAPGui CD content the SAPCOnsole.exe for configuration
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network( but if to have a entrance in the SAPGUi indicate a SAProuter in another factory is possible to have acesses.. ) is a mandatory. Cause the SAPCOnsle folow the SAPGUI entrances and need a LAN or a WAN configurated.
Advantage
simple to congurated and chip.
Easy to create to new window cause the SAPConsole only plubish this window in Browser.
Disadvantage
Need a lincense for each Poket or Datacolletor, wherever the equipment you will use.
Doesn't have a Database using through Browser (IE6 or IE7) this way , during the processes lost network you go to lost the information not saved.
SAPMobile
1 ) Need the a good Machine with a instance of SAP configurate
2 ) Have to found the EXE in the MarketPlace
3 ) is not publish, and yes a client with the database configurate in equipment
4 ) The equipment like Pocket and datacolletor has been to configurated in a Network
Advantage
Need only one SAP License, doesn't metter how many equipment in use you have.
As the SAPMobile has a Database in the client , if you lost the network it goes to save in the local database and when the network come back , it will to synchronize. This way you don't need to work online every moment, you get to synchronize after.
Disadvantage
You profit in license is your lost in the Machine cause the price of Machine is expensive.
is configurate only in windows Mobile.
The window only can be create for a Developement and not in the SAP, have been created in windows Mobile.
A tip, the both is good but you can do a simple mathematics.
In the SAPConsole how much money you go to spend is the least of the Machine s Price.
If yes confurate the SAPConsole , if not configurate the SAPMobile

Difference between open text ECM and SAP DMS?

Hello All,
What is the difference between open text ECM and SAP DMS functionality ??
Why we use SAP open text extended ECM ?
please help me to know about additional feature provided by open text ECM apart from SAP DMS??

Hi,
normally openText is not a part of SAP Document Management but I hope that the following links could be useful for you:
Extended ECM version 10 documentation can be ac
cessed from following locations:
Extended ECM for SAP Solutions 10.0 Support Package 2:
https://knowledge.opentext.com/knowledge/cs.dll/Open/34046660
or
https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
es100002.xml
Older versions of xECM documentation are available from following links:
Extended ECM for SAP Solutions 10.0.0:
https://knowledge.opentext.com/knowledge/cs.dll/Open/19614094
or
https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
es100000.xml
Extended ECM for SAP Solutions 10.0 Support Package 1:
https://knowledge.opentext.com/knowledge/cs.dll/Open/25691512
or
https://knowledge.opentext.com/knowledge/piroot/_doclists/extsap-basic.e
es100001.xml
Please ensure you have access to documentation links.
Best regards,
Christoph

*what is the difference between web flow engine and sap business workflow?*

Hi,
Can any please guide me by telling what is the difference between web flow engine and sap business workflow?

>
Arghadip Kar wrote:
> Check this link
>
> http://www.workflowing.com/id35.htm#1__what_is_the_difference_between
... which is exactly where the FAQ item came from!

Difference between Ecc 5.0 and Ecc 6.0 SAP note number

Hello Friends,
Is any one knows difference between Ecc 5.0 and Ecc 6.0 version released SAP notes for FICO module.
Thanks in advance for your help
Thanks,
Ratnam

Hi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay

Difference between ECC 5.0 and SAP 4.7

Hi,
Can anyone please explain the difference between ECC 5.0 and SAP 4.7 from ABAP point of view? What is the full form of ECC?
Best wishes,
Atanu

Hi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay

Difference between BI 7.0 and Prior versions

hi all,
can any one please tell me the diff between BI and BW .please send any docs or PDF'S on that if possible.and what are the new features available in BI 7.0 .please send the docs or pdf's to [email protected] help will be greatly appreciated
Thanks in advance,
ashok

Hi Ashok,
I am listing some of the imp differences between BW 3.5 and BW 7.0 below:
1. Data Modeling Flow:
a.     Create Data source
b.     Create Info source
c.     Create Transformations b/w data source and info source (earlier it was transfer rules)
d.     Create Info Package
e.     Create Info Provider (info cube or Data Store Object instead of ODS)
f.     Create Transfer rules b/w info source and data targets (instead of Update rules)
g.     Create DTP (data transfer process). To pull the data from Info package (i.e. from PSA) to Info Provider.
2. For Delta option in customized cube there is one new feature called Filter no new records which is present in DTPs of Data Store Object.
3. In Info sets now you can include Info cubes as well.
4. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
5. The BI accelerator (for now only for info cubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
6. The monitoring has been improved with a new portal based cockpit. Which means you would need to have an EP guy in your project for implementing the portal!
7. Search functionality has improved!! You can search any object. Not like 3.5
8. Transformations are in and routines are passed ! Yes, you can always revert to the old transactions too.
9. Data Transfer Process are in. It is used to pull the data from Info package (i.e. from PSA) to Info Provider.
Try the links given below for further details:
Check this.
Frequently Asked Questions in SAP NW 7.0 - Enterprise Data Warehousing, Reporting, Query & Analysis and Business Planning [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/93eaff2d-0a01-0010-d7b4-84ac0438dacc [original link is broken]
You could get some SAP Documents here.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
These two PDF files has all almost all info about BI2004s.
Go through this Link for BI 7.0 Documents.
https://websmp101.sap-ag.de/bi
and Click on BI Standard Presentations link.
Here You can download BI 7 Documents
Refer these documents. You will get a clear idea.
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
BI 7.0 Documents:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/9280fb2d-0a01-0010-0f80-f33ab5c1606d [original link is broken]
Check this for what's new in NW2004s BI:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
Diff b/w BI 7.0 Vs 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
I hope this wil give you some idea about BI 7.0
Thanks,
Ashu Gupta.

Differences between the alv's and alv grid dispaly

hi guys
.........please send the differences between the alv's and alv grid display.
thanks....

Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan

Cost difference between PM report MCI8 and IW38 orders cost

Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
                               MCI8                                 IW38
Total costs             8.041,69                           5.544,99
of WOs               18                                     18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
Santhamoorthy

Hello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen

Differences between XI 3.0 and 7.0?

Can anyone say the difference between SAP XI 3.0 and SAP XI 7.0? Also I would like to know when 7.0 is released in the market?

Hi,
that's the answer I received from OSS support regarding availability of XI 7.0 (status end of last year):
<i>the actual Release is XI 3.0 which is part of NetWeaver '04 as you
probably now.
XI 4.0 to XI 6.0 will be left out to synchronize the Release numbers of
NetWeaver components.
That means that the release which followes XI 3.0 is called XI 7.0 (and
not XI 4.0).
For XI point of view there is not much difference between XI 3.0 and XI
7.0
Regarding your question:
unfortunately we plan to give out the next major release just about end
of next year (2006).</i>
regards,
Peter

Difference between XI 3.0 and XI 7.0

What is the Difference between XI 3.0 and XI 7.0?
( functionality & architecture wise)

Hi,
There is no new features added in PI7.0, if u have working on XI 3.0, PI7.0 Older versions the features same..
But PI7.1 there is new changes u can find below.....
Integarte SAP & Non-SAP Legacy system
PI 7.1 is based on open, web service enabled standards and
Integrate all SAP and non-SAP, A2A, B2B, BPM, service enabling and BAM
Highlight of enhancement in PI7.1
1) Enterprise Service repository (ESR) contains the design Registry
2) Includes significant high-volume message processing is supported by message processed in a single
Service call
3) Also importantly support for asynchronous messaging based Reliable Messaging (WS-RM) for both
Brokered communication between two systems will be supported in this release.
4) Provide Service Registry benefits based on UDDI 3.0
Enterprise Service Repository
In PI7.1 ES Repository is at the heart of Enterprise SOA
ES Repository is really the master data repository of service objects for Enterprise SOA
It contains the definition & process of services
In ES Repository has two parts, one is the ES Repository and the other being the Services Registry
ES Repository (ESR) is really the master data repository of service objects for Enterprise SOA
Besides service definition the ES Repository also provides you with a central point for finding and
Managing service metadata from different sources, including application deployments - this is
Where the Services Registry comes in. The Services Registry is the UDDI part of the ESR which
Enables service consumers to find services
The SAP XI Integration Repository used by process integration has become the basis of the central Enterprise Service Repository: powering Enterprise SOA and Service Enablement.
Objects in the ES Repository include:
Global Data Types (CCTS based)
Process Component Models
Executable Integration Processes (BPEL)
Integration Scenarios
Service Interfaces (Enterprise Services)
Interface Mappings
Enterprise Services built in the ES Repository
Enterprise Services includes:
Are built using a consistent enterprise model based on: GDTs, Process Components, and Business Objects.
Are based on open standards.
Are mapped to the Service Interface object in the ES Repository.
Global Data Types - Building blocks for Service Interfaces
Defined in the ES Repository
Defined company-wide based on open standards (ISO 15000-5, UN/CEFACT CCTS)
Reusable semantic building blocks for service interfaces and message types
Process Component Models
Drill down from high-level models to service interfaces and operations
Process component architecture models enable SOA governance
Process components expose on enterprise services, which are based on service operations
Web Services Reliable Messaging (WS-RM)
Asynchronous messaging (EO, EOIO) based on open WS standard
Support Business Activity Monitoring (BAM)
Embedded Event Infrastructure: Collecting, pre-filtering and publication of events across SAP and non-SAP systems.
Event handling: cast the local event to an event proxy to send out event messages to event Consumers.
Transaction SWF_BAM for event filtering via filter rules and event handling.
Enhancement for Mapping
Re-usable user defined functions.
Look-up function reads multiple fields.
Synchronous DB RFC lookups: Use graphical function to model look-ups.
Specify mapping parameters at configuration time.
Principle Propagation based on SAML
This feature uses the WS-RM protocol.
The implementation of this feature is based on the open standard SAML and can
be used with backend systems that support the SAML technology.
Forward user context from sender to receiver.
Authorization check in receiving system based on original user.
Support BAM Milestone Modeling (BPEL)
Sub-Process Calls: Integration Process Call,
User Interaction: User Decisions (initially not part of this project, but will be covered as well to draw the complete picture),
Alert Categories
Enhancements for Process Automation
Human interaction:
Integration paradigm (design/ configuration).
Generic user decision.
Language dependent texts for end-user display, enriched with variables.
WS-BPEL 2.0 adoption: Preview and implementation BPEL4People, BPEL-SPE Simple user defined functions can be configured directly in the process.
reward points if helpful...
PrasHanT

Differences between XI 3.0 and PI7.0?

Hi Experts,
I want to know the major differences between XI 3.0 and PI7.0?
can anyone suggest me some weblogs which explains the all the new features of PI7.0.....as i'm very much keen to learn PI7.0
Thanks
Faisal............

Hi,
There is no different between XI3.0 and PI 7.0 but there is a lot difference in XI3.0/PI 7.0 and PI 7.1.
Refer the below thread for Xi and PI difference:
PI 7.0 and XI 3.0
there are many threads with sme topics
New highlights for SAP NetWeaver Process Integration 7.1 are:
Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services
Universal Description, Discovery, and Integration (UDDI) 3.0compliant services registry for runtime management of enterprise services
Improved support for standards such as Web Service Reliable Messaging (WS-RM), WS Policy, Security Assertion Markup Language (SAML)
Extended support for high volume scenarios
Business Activity Monitoring for process definition of milestone monitoring (event correlation)
Improved SAP NetWeaver Administrator support for central configuration and administration of both mediated and point-to-point scenarios.
XML payload validation
Process editor modeling enhancements: step groups, integrated alert management, configurable parameters
Integration of human interaction (generic user decision)
WS-BPEL 2.0 preview.
Message Packing.
Local Processing in Adapter Engine.
Reusable UDFs.
Lookup function with multiple results.
Refer the below link form where the most of the above information has been taken:
1) Capability and Enhancements of SAP NetWeaver Process Integration 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/community/capabilityandEnhancementsofSAPNetWeaverProcessIntegration7.1&
2) New SAP NetWeaver Process Integration:
/people/udo.paltzer/blog/2007/04/26/new-sap-netweaver-process-integration-release-planned-for-2007
3) Enhancement in PI 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/27/briefdescriptionaboutEnhancementinPI7.1&focusedCommentId=40564
4) SAP NetWeaver Process Integration 7.1 - Overview of New Capabilities:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
5) SAP NetWeaver PI 7.1
/people/daniel.bianchin/blog/2007/12/19/all-you-wanted-to-know-about-sap-netweaver-pi-71-and-more
This section has all the relevant links for each topics:
Enterprise Services Repository:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0301486-758c-2a10-9d84-a195556df422
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a4127-5403-2a10-0a96-e9452c3ab1de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f90f22-678c-2a10-91a0-f1f1bf7ff191
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
Advance adapter engine:
/people/william.li/blog/2008/01/10/advanced-adapter-engine-configuration-in-pi-71
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
SAP Network Blog: Share User-Defined Functions in Message Mappings of PI 7.1
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
SAP Network Blog: Mapping Enhancements in SAP NetWeaver Process Integration (PI) 7.1
/people/jin.shin/blog/2008/01/11/sap-pi-71-mapping-enhancements-series-mapping-enhancements-demo
New Business Process Engine Features in SAP NetWeaver Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0068bc1-6f8c-2a10-52bb-c6ee3562feb2
Folders for more flexible and organized way of development.
/people/william.li/blog/2007/08/07/using-folders-in-pi-71 -- Folders in PI 7.1
High Volume support in PI 7.1
/people/holger.faulhaber/blog/2007/12/12/high-volume-support-in-pi-71
Upgrade to SAP NetWeaver PI 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce

Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

Similar Messages

Maybe you are looking for