Doubt about how to extend 2LIS_08TRTLP.

hello all!
i have a doubt about 2LIS_08TRTLP extractor. I checked the Estructure Maintenance for this datasource and it has
the follow BW communication structure: MCCOMVTRLK, MCCOMVTRLP, MCCOMVTSP, MCCOMVTTK e MCCOMVTTS. Searching for
field UATBG, i found it in MCCOMVTTK and MCCOMVTTS.
when i try to extend the 2LIS_08TRLP datasource with UATBG field, i just can do this with MCCOMVTTS-UATBG because i
didn´t find the UATBG-MCCOMVTTK in field list. I need MCCOMVTTK-UATBG and not the MCCOMVTTS-UATBG.
what is happening here friends?

Hi,
   2LIS_08TRTLP gives the Delivery Item in Shipment. Therefore it mainly deals with the deliveries and the shipment stages. Therefore most of the fields come from the VTTS and LIPS.
IF you need data from VTTK, then you need to use datasource 2LIS_08TRTK.
Also refer sap note 440166. It gives the design using an ODS. Basically, you get to know what are the keys being used for fetching the data from the tables.
Regards.

Similar Messages

  • Tutorial about how to extend the bdoc activity_object with own segments

    Hi!
    We had lots of problems with the things described in this subject here.
    Worse: We can't solve the problems and now we're going another way for our mobile-crm-solution...
    Are there any how-to-guides or tutorials anywhere online about how to extend standard bdocs with own segments?
    How-to-guides about mbdocs and sbdocs and how they are playing together?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi lngo,
    I would suggest you use EEWB to enhance the Activity object. There is the provision of enhancing the Mobile sbdocs directly from EEWB.
    This way you don't have to spend lots of efforts in developments.
    When you create extension in EEWB, for input fields select the appropriate values mention below:
    EEW Bus. Obj: BUSINESS_ACTIVITY
    Extension Type: ACTIVITY_H
    On Next Screen enter screen title and press continue.
    On Next screen select 'Business Activity' and continue.
    Enter the fields required on next screen and continue.
    Further on next screen define if fields should be releavant for header, item or both.
    and on the next screen select 'Mobile' so that sbdocs are accordingly modified.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • Doubt about How to test the BAPI

    Hi Experts,
    I have one doubt. How to test one BAPI. I have BAPI_DOCUMENT_SAVEOBJECTLINKS
    I am using this BAPI to attach the document to the material. I opened se37 .Here how to test the BAPI wether the BAPI is Suitable to attach the document  or not. Please let me know . Its very urent.
    Helpful answers may be reward points
    Regards
    Khanna

    Hi,
    First you have to create a new document using CV01N tcode. Here leave the document field as blank, document type value can be choosen from F4 help and document part and document version can be given as 0. Press enter and add the necessary values and save. It will then create a new document. Using that document go to SE37 and execute the BAPI. In the BAPI also you need to give the document no that is generated, and document type, document part and document version of the newly generated document. In the OBJECTLINKS table of the BAPI give the material number and other details. Please see the function module documentation of this BAPI also.
    Please reward points if it helps.
    Regards
    Vimal

  • Audigy 4 + DTT3500 doubts about how to conn

    I have an Audigy 4 and an old DTT3500 Digital 5. (old but still very good, no reason to buy a new set, is also a Dolby Digital decoder). The DTT3500 accepts optical, coax, digital din and as 'line in' only front and rear (no center).
    Ok, so previously I had a Audigy (and Audigy 2) and I both connected those using the digital din. With this, I got full 5. surround in games and when playing DVD the digital sound was send through the decoder and got decoded by the amplifier.
    Now with the Audigy 4 I am confused. I have bought a new product but it seems I have _LESS_ features? As I understand it I have to connect the analog out's of my Audigy 4 to my DTT3500 for games (and miss the center channel because my DTT3500 doesn't have an analag-in for center). I also have to connect the digital out to my DTT3500 in case I want to play a DVD movie and use the DTT3500 decoder to get full 5. DVD sound.
    It seems there is no way anymore that I can have 5. sound in games? So, I'm wondering if there is a way that I can make my own 'custom cable' which has a digital din on one end (for in my DTT3500) and at the other end is a combination of different outputs of the Audigy4. Is that possible?
    Also, I don't like that now when I have to switch between headphone and speakers I have to unplug the front DTT3500 plug and switch it with my headphones. I very often change between headphones and speakers (for online gaming matches I use headphones, also at night, but for the rest I use my speakers).
    Any advice for the most elegant solution? Or I'll just have to li've with it ... maybe switch my Audigy 4 back for an Audigy 2 (which is in an older computer that I still have).

    dchandresh wrote:
    yes it is Audigy 4 pro.and i want to buy that yamaha receiver for connecting it to NS P00.i want to connet through SPDIF on soundcard (there are 3). So i want to know is it compitable with the yanaha RXV 357.
    thanks
    It seems, you can connect Audigy 4 Pro to RXV least through coaxial.
    You can download the manual for RXV-357 from Yamaha.
    Here is also a picture of connectivity.
    jutapa

  • How To Extend Adobe Audition CS5.5

    I've received a number of questions on how to extend Adobe Audition with questions similar to:
    How do I import file format X?
    How do I import a project from application Y?
    Will there be an SDK available?
    How do I add plug-ins to Audition?
    I had made a post similar to this in the public beta of Audition for Mac, but I can no longer find the thread. So I'll reiterate some stuff here:
    Area
    Info
    Adding VST Plug-Ins
    Most of you have found this already, but the best place to start is in the Audio Plug-In Manager
    If you want to "write" new plug-ins for Audition, writing a VST plug-in will be the best option as it will allow you to write something that will work on Windows as well as OSX.  Info on writing a VST plug-in may be found here (http://www.steinberg.net/en/company/developer.html)
    Adding Audio Unit Plug-Ins (Mac OSX)
    Same as Above.   Note that OSX ships with some built-in AU plug-ins that Audition can utilize for free if you just scan at least once.   We don't scan on startup because there's several plug-ins out there in the world that don't behave well.  Info on Audio Unit plug-in development can be found here (http://developer.apple.com/library/mac/#documentation/MusicAudio/Conceptual/AudioUnitProgr ammingGuide/TheAudioUnit/TheAudioUnit.html)
    Adding more import formats via libsndfile
    libsndfile is an open-source C library for reading and writing audio files (http://www.mega-nerd.com/libsndfile/)   Ambitious people could download the source, write support for another format, and create their own custom-rolled library of libsndfile.  You would then replace the version of libsndfile with which Audition CS5.5 ships, with the one you rolled.   Due to the way we use libsndfile, any format you add would show up in Audition.   This is also true if there's an official update to libsndfile that comes out in the future, you could just plop it in and it should work. 
    If you're interested in exporting or writing formats that libnsdfile supports, please tell us which formats are the most important to you and in what way you use them in your workflow.
    Adding more import formats via QuickTime components
    QuickTime has the ability to be extended via QuickTime Components.   There's several examples out there, but here are some websites to check out:
    QuickTime Components (http://www.apple.com/quicktime/resources/components.html)
    Learn about even more QuickTime capabilities (http://www.apple.com/quicktime/extending/components.html)
    Flip4Mac for Windows Media support on OSX (http://www.telestream.net/flip4mac-wmv/overview.htm)
    Perian -- the swiss-army knife for QuickTime (http://perian.org/)
    Calibrated Software (http://www.calibratedsoftware.com/products.asp)
    In most cases, just adding the various QuickTime components will automatically add the import functionality to Audition.
    Importing project formats from other applications
    As seen on other threads in this forum, Ses2sesx (http://www.aatranslator.com.au/ses2sesx.html) and AATranslator (http://www.aatranslator.com.au/) seem to add quite a bit of support.
    SDK
    At this time, we haven't released an SDK for Audition.   If you're interested in one, however, please tell us what you would want from an SDK for Audition and we'll take it into consideration.
    Message was edited by: Charles VW
    Added links to AU and VST development info

    Charles,
    could you please also advise what PC users can do to make common avi files useable in AA CS5.5? The obvious problem is, no matter how many exotic video formats a PC can play by way of video-for-windows codecs, these are useless for Quicktime, because Quicktime on the PC needs codecs specifically written for "Quicktime for Windows", which are, as I've come to find, EXTREMELY rare. So far I've only found ONE, sold by 3ivx, but this costs as much as the AA CS5.5 update itself. Without them, Quicktime on the PC will only handle mov files, which are not too popular on the PC. Is there any other way out of this?

  • How to extend movie length in Shake 4.1

    I'm not achieving the results I want when I try to retime a clip in Shake. I want to take a 3-second NTSC clip and extend it out to 4 seconds to fill a gap in my FCP timeline. In the Parameters1 tab of the SFileIn node that contains my original clip, I entered the desired speed in the reTiming menu and set the retimeMode to Adaptive. In the Globals tab, I set the timeRange to 1-120. When I render out from Shake, the length of my new movie file contains my original 3 seconds of video and 1 second of black.

    Make sure you set your adaptive first... THEN the speed change. Setting Adaptive second resets the time change.
    Also - make sure your render out represents all frames too. Not just the timeRange setting.
    Also -- according to one of the quys who wrote shake... the preferred method for speed change in a FCP to Shake transfer is to make the speed change IN FCP first... then use that speed as the key speed in Shake. That way you don't have to worry about how many frames you need.
    Good luck,
    CaptM

  • Doubt about Bulk Collect with LIMIT

    Hi
    I have a Doubt about Bulk collect , When is done Commit
    I Get a example in PSOUG
    http://psoug.org/reference/array_processing.html
    CREATE TABLE servers2 AS
    SELECT *
    FROM servers
    WHERE 1=2;
    DECLARE
    CURSOR s_cur IS
    SELECT *
    FROM servers;
    TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
    s_array fetch_array;
    BEGIN
      OPEN s_cur;
      LOOP
        FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
        FORALL i IN 1..s_array.COUNT
        INSERT INTO servers2 VALUES s_array(i);
        EXIT WHEN s_cur%NOTFOUND;
      END LOOP;
      CLOSE s_cur;
      COMMIT;
    END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
    could crash redo log ?
    using 9.2.08

    muttleychess wrote:
    If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
    SY.

  • Doubts about BP number in SRM and SUS

    Hello everyone,
    I have some doubts about the BP number, especially for Vendors.
    I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
    - Can I have the same BP number in SRM and SUS?? Or is it going to be different??
    - When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
    - When is it necessary to replicate vendors from SRM to SUS??
    Thanks
    Ivá

    Dear Ivan,
    Here is answer to all your questions. Follow these steps for ROS configuration:
    Pls note:
    1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
    2. No need of XI to transfer new registered vendor from ROS to EBP
    Steps to configure scenario:
    1. Make entries in SPRO --> "Define backend system" on both clients.
        You will ahev specify logical systems of both the clients (ROS as well as EBP)
    2. Create RFCs on both clients to communicate with each other
    3. In ROS client create Service User for supplier registration service with roles:
        SAP_EC_BBP_CREATEUSER
        SAP_EC_BBP_CREATEVENDOR
        Grant u201CS_A.SCONu201D profile to the user.
    4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
    5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
        attributes. create vendor org structure in ROS client
    6. Create your ROS registration questionnaires and assign to product categories- in ROS client
    7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
        defined as supplier directory in SRM server - EBP client.
        Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
        Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.) 
    8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
    9. Modify purchaser role in EBP client:
        Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
    10.Maintain organizational data in make settings for business partner
    Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
    11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
    I hope this clarifies all your doubts.
    Pls reward points for helpful answers
    Regards,
    Prashant

  • Doubts about use of REPORTS_SERVERMAP with Forms11g HA

    Hi,
    I'm configuring a Linux 64bits Forms/Reports 11g HA environment, the point is that i have two nodes, each one with its Forms and Reports servers, let's say FormsA and ReportsA for the first node and FormsB and ReportsB for the seconde node.
    i want FormsA to be able to call reports from ReportsB and FormsB to be able to call reports from ReportsA.
    I've been reading about REPORT_SERVERMAP
    http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_conf003.htm#autoId5
    But i have some doubts about its use:
    1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
    2. The link provided says "Using RUN_REPORT_OBJECT. If the call specifies a Reports Server cluster name instead of a Reports Server name, the REPORTS_SERVERMAP environment variable must be set in the Oracle Forms Services default.env file"
    In fact i'm using RUN_REPORT_OBJECT but
    what is the Reports Server cluster name ?? and where do i find that name ??
    3. Is this configuration well defined:
    REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
    4. At forms applications when using RUN_REPORT_OBJECT, can i assume that the report server name will be the cluster name specified at the REPORTS_SERVERMAP ??
    5. Which files should i modify rwservlet.properties or default.env ??
    Hope you can help me :)
    Regards
    Carlos

    Hi,
    1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
    --> In such case what could go wrong is
    Suppose Run_report_object executed jobs successfully to ReportsA
    But web.show_document command for getjobid failed ( as ReportsA went down by this time)
    --> You will not get the output shown ( though job was successful)
    If shared cache was enabled, then Even if ReportsA is down, other cluster member ( say ReportsB)
    will respond back to web.show_document.
    Point 2,
    --> Under HA is it highly recommended to use web.show_document ( a servlet call) to execute reports. This is to help use all HA features at the HTTP , Webcache or load balancer level.
    However if there is migrated code or Run_report_object is must, then the recommendations as you see in the pointed document is must.
    REPORTS_SERVERMAP setting needs to be configured in rwservlet.properties file and also in default.env Forms configuration file to map the Reports Server cluster name to the Reports Server running on the mid-tier where the Load Balancer forwarded the report request.
    For example FormsA, ReportsA, cluster name say rep_cluster
    default.env file
    REPORTS_SERVERMAP=rep_cluster:ReportsA
    Where "rep_cluster" is the Reports Server cluster name and "ReportsA" is the name of the Reports Server running on the same machine as FormsA
    rwservlet.properties file
    <reports_servermap>rep_cluster:ReportsA</reports_servermap>
    At default.env this is not a valid entry
    REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
    what is the Reports Server cluster name ?? and where do i find that name ??
    --> This is created via EM on the report server side.
    Would recommend to refer following documents at the myoracle support repository
         How to Setup Reports HA (High Availability - Clusters) in Reports 11g [ID 853436.1]
         REP-52251 and REP-56033 Errors When Calling Reports From Forms With RUN_REPORT_OBJECT Against a Reports Cluster in 11g. [ID 1074804.1]
    Thanks

  • When saving a page under text format, the text is limited to 80 columns only, how to extend to 120 columns

    When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?

    HI K,
    This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
    Regards,
    Barry

  • Doubt about Scan and Update Catalog Objects That Require Updates link

    Hi,
    I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
    how can I know how many objects that required upgrading before I click this link???
    in doc.
    http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
    section 17.2.4 Updating Catalog Objects
    It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
    but I don't find it . my OBIEE version :11.1.1.6.2
    conld you pleae help me ??
    thank you in advance.

    That link should be there in 6 version.
    I've verified in 11g6 version doc the same is existing
    ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
    BTW:
    http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
    Thanks,
    http://cool-bi.com

  • Doubt about Fitting

    Hi everybody 
    i have a little doubt about the "Linear Fit .vi"; i see the help page and i undestand that it takes a set of value X and Y and makes out the best fitting of the Y value. I tried to use it in a project and:
    In the first block (the upper one) it takes a data set (X,Y) and makes the fit..ok!
    In the second one (the lower one) it takes a ramp signal + noise data in the Y input and just the ramp signal in the X input.. how can he makes the fit? 
    It takes the same signal, how can it read the x value and the y value ? If i have a waveform in "dynamic data set" how can i separate the X and Y component? can i put the same signal in the X and Y input ?
    I hope to be clear.. i just want to know how can the .vi read several kind o input.
    Thank you
    Nigeltorque
    Attachments:
    STATIC ResponseMOD.vi ‏30 KB

    I post the attachement in older version too..
    Nigeltorque
    Attachments:
    STATIC ResponseMOD 8.6.zip ‏39 KB

  • Doubt about the sizing in the CPH

    Hi gurus!
    I have the following doubt about the sizing in the CPH.  I'm going to implement the CCMS BI CONTENT, i read the Note 979581 - Installing and configuring the CCMS BI Content, but in the document called "IT Performance Reporting Using SAP NetWeaver Business Intelligence" you can see images in this link:
    http://www.servidor-imagenes.com/show-image.php?id=050236bd91654e16c94a559350611dff
    here said how I can calculate the sizing based in Data Record Size per each Metric stored, but in specific,  about the example: 20 systems, 17 CPH metrics. are included SCM, BI, ECC, SOLMAN in this 20 systems? And about the 17 CPH Metrics is talking about ratios? what's mean the CPH metrics?, How can I know what is my CPH metrics?
    I hope can help me
    Best Regards
    Ramon Sanchez

    this theme has been closed on our enterprise

  • Doubt about @SequenceGenerator annotation (sequenceName element)

    Hello, everybody!
    I'm with a doubt about the @SequenceGenerator annotation. What is that sequenceName element? Is that a stored procedure in the database that we have to create or what? If we specify it, what do we have to create in the database? If we don't specify the sequenceName element, will the sequence be generated for us?
    Thank you in advance.
    Marcos

    B.Mansour Nizar wrote:
    no i don't want to remove the @GeneratedValue but instead just bypass it just in that case only to gain peformanceEither you bypass JPA altogether for the task and then manually update the sequances afterwards or, if you are using hibernate, you implement a custom Idgenerator that can use a provided ID.
    The implementation involves extending IdentityGenerator and ovveriding the generate method to return super.generate if the entity Id is null and return the supplied entity's Id otherwise. You then set that generator for that entity.

  • Doubt about webDynpro windows

    HI Experts,
    I have small doubt about webdynpro windows.
    1) If i have only one application in webdynpro DC , what is use of using multiple windows.
    2) If i have multiple windows in a DC which has single application, how i can i navigate between windows?
    3)if i have multiple applications with multiple windows, then how will i know which window belongs to which application.
    4)If i have multiple windows and multiple applications, then how can we navigate between windows? It means navigation betn windows and navigation betn applications...?
    Please explain me, i browsed in SDN, i found the threads but they are explaining my doubts exactly
    Thanks in advance.
    Regards,
    Bala

    Hi.
    Simply the Window is part of Web Dynpros public interfaces, and are needed whenever you want to access a graphic component from outside of your web dynpro component.
    Web Dynpro uses the MVC design pattern. Model View Control.
    In order to reuse components, Web Dynpro exposes the View and Controller to the outside world.
    Internally the View and Control in MVC is just that:
    Views
    Component Controller and Custom Controller.
    Externally the View and Control are exposed as
    Interface Controller and Interface Views. The Interface View is the external part of a Window. (When a Window is created, an associated Interface View is created).
    So, to be able to actually see anything from a Web Dynpro application. The browser would access a Interface View that opens the Window with some view in it.
    An other example is that you have two Web Dynpro projects, where the first one have a View with an integrated view from the second Web Dynpro. The integration would be through the Interface View again.
    Internally in your Web Dynpro component, you can use the views directly (i.e. navigate between views).
    Opening an external popup would generate a new browser window. In order for the new browser window to display anything it would need to access an interface view. That's why you need to create a separate Window when you want to use a popup.
    Regards.
    Edited by: Mikael Löwgren on Feb 15, 2008 12:58 PM

Maybe you are looking for